PRESSURE

TRANSDUCERSCE and UL approved

Pressure Transducers for Regrigeration Applications ▼

Pressure Transducer for Chiller-Water Applications ▼

Differential PressureTransducers ▼ Explosion Proof Pressure

Transducers ▼

www.mcscontrols.com

5580 Enterprise Pkwy., Fort Myers, FL 33905Office: (239) 694-0089 Fax: (239) 694-0031

MCS-050 DIFF▲

MCS-200B▲

MCS-667B▲

MCS-500B▲

MCS-150AB▲

Absolute pressure uses absolute zero as a definitive

reference point

MCS-200B-W▲ MCS-100XP

MCS-200XP MCS-500XP

The right sensors helps create more stable HVAC systems

The MCS-150AB, MCS-200B, MCS-500B and the MCS-667B are designed for use in refrigerant chiller system. The above pressure transducers have a Neoprene sealing material.MCS carries an extensive line of pressure transducers, including the MCS-150AB absolute pressure transducer which uses absolute zero as a definitive reference point, absolute pressure remains precise and accurate regardless of changes in ambient or process temperature.

The MCS-200B-W pressure transducer is specially designed for use in HVAC Chilled-water applications, in the most demanding environments, where low cost is needed yet maintaining high accuracy, long term reliability, and long life.The MCS-200B-W pressure transducer is CE, UL and RoHs compliant. It is capable of surviving high vibration. MCS-200B-W is a sealed gage pressure transducer with a cavity built out of stain-less steel with a BUNA-N sealing material (Excellent resistance to oils, solvents and fuels, ¼” SAE Female Flare fitting & Schrader valve; 7/16-20 UNF pipe thread which creates a leak-proof, all metal sealed system that makes the MCS-200B-W ideal for use with rugged HVAC environments using Chilled-water Media.

When specifying sensors, consider quality, accuracy, consistency, ease of installation and replacement, and interoperability. High performing sensors help reduce the design costs, development and testing cycle time.

Heavy duty pressure transducers Higher pressure applications within HVAC systems – rooftop cooling towers, boilers, pumps and chillers – require pressure transducers that are durable, CE compliant, designed for IP66K sealing protection, and able to withstand wide temperature ranges and contact with harsh media (e.g., refrigerants, driving rains, hydraulic fluids and compressed air up to 1000 psi). With stainless steel housing and ports, these transducers can minimize moisture infiltration and shorts at the sensor location, and in turn, downtime and replacement costs.

Heavy duty pressure transducers provide two measurements: 1. The amount of pressurized air being delivered to the application2. The presence of air pressure leaksThese measurements come from continuously monitoring the pressure of the compressor outlet, chiller outlet, evaporator coil outlet and the cooling tower supply, ultimately providing data to regulate the flow of heating/cooling media during partial load conditions.

MCS PRESSURE TRANSDUCERS PROVIDE THE SECURITY AND ASSURANCE THAT YOUR HVAC SYSTEM NEEDS

MCS-150AB MCS-200B MCS-500B MCS-667BThe cable is available in either 20’, 40 or 60’ lengths with a removable Packard connector to provide easy serviceability.

For Refrigeration Applications, Neoprene sealed

MCS-015-DIFFMCS-050-DIFF

Differential Pressure Transducers

The MCS-015 and MCS-050 DIFF Transducer sensors exceeds the latest heavy industrial CE requirements including surge protection and reverse polarity protection. The amplified and mV output pressure transducer has two pressure ports for high and low pressures and all wetted parts are made of 316L stainless steel.

The MCS-XP Explosion Proof pressure transducer is an economic and durable option for dealing with high-pressure industrial applications where an explosion proof transducer is required. The high strength one-piece stainless steel construction contains no silicone oil, no welds, and no internal “O” rings, and also offers a full hermetic seal against corrosive media.CE and UL approved, the MCS-XP is capable of surviving high vibration. It includes a cavity built out of solid 316L stainless steel with1/4” SAE Female Flare fitting; 7/16-20 UNF pipe thread which creates a leak-proof, all metal sealed system that makes the MCS-XP ideal for use with rugged HVAC environments. MCS-XP has an output voltage of 0.5 to 4.5vdc (ratio metric) and is also overvoltage-protected in both positive and reverse polarity, which adds an extra layer of safeguard against short-circuiting caused by unpredictable power surges.

Option-H .................Explosion proof Housing

MCS-100-XPMCS-500XPMCS-667SP

Explosion Proof Pressure Transducers

• As Low As ±0.1% Pressure Non Linearity • Tank Level Measurement• Rugged Construction:

Can Withstand 50g Shock/20g Vibration• Filter Performance Monitoring• Up to -40°C to +125°C Operating

Temperature Range

• Corrosive Fluids and Gas Measurement Systems• Excellent Stability • Flow Measurements• Measure Differential Pressure Across Chiller Barrels• Proof of Flow• Can Be Used to Calculate Flow Rate

Providing HVAC/R Solutions Worldwide

The MCS CommitmentThe founders of Micro Control Systems Inc. have been in the manufacture of Microprocessor Controls their entire careers and have over eight decades of combined HVAC/R Microprocessor Controls experience. MCS was founded to meet the needs of the Utility and HVAC/R Industries with products based on the following design criteria:

Quality & Service

Cost Effectiveness

Ease of UseOur commitment is to provide practical solutions for the industries needs

and to be both a leader and partner in the effective use of Microprocessor Controls.

5580 Enterprise Pkwy., Fort Myers, FL 33905Office: (239) 694-0089 Fax: (239) 694-0031

www.mcscontrols.com