ce-marking 2008 technical advisory service. ce marking the directive for building products (dpc)...
TRANSCRIPT
CE-Marking
2008
Technical Advisory Service
CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
Directive « CPD » 89/106/CEE6 essential requirements : -mechanical resistance and stability -safety in case of fire -hygiene, health, environment -safety in use -sound protection -energy insulation
Glass Mandate to draft EN standards (TC 129 : glass in building)
European Open market (1975)Same product evaluation base in Europe
The Directive for building products (DPC)
CPD = European Directive (1988) Applied in the national regulations of the
European Union Members Belgium : Royal Decree 19-08-1998 The European Community checks the
uniformity of this application
The Directive for building products (DPC)
The CPD offers An harmonized system for the technical
specifications A common attestation of conformity system
for the technical specifications A structure of acknowledged organisms The CE marking of products
The Directive for building products (DPC)
The CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
What is CE marking ?
Official definitifion: the CE marking represents the fact that a product is accurate with all the DPC applications regulations
Pratical definition: a passport allowing the product to go over all european borders
Aims of the CE Marking
CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
CE Marking
Transposition intonational laws
Harmonizedstandards
Mandatesfor CEN
CE Marking (ETAG)
National procedure for ETA
Transposition intonational laws
ETAGguides
Mandates forEOTA
CE Marking
InterpretativeDocuments
CPD transposition in the national laws for basic principles and structures
The ways to obtain the CE marking
CUAP (EOTA)
CEN :- Harmonized standards of products (hEN)
- Support standards (EN, f.e. trials and calculation systems, evaluation of the conformity)
EOTA :- Development of European Technical Agreement Guides
(ETAG)
- Give ETA based on ETAG or via CUAP
The ways to obtain the CE marking
The CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
Standard hEN : Evaluation of conformity
Establishes the links between : - the application of the product (Intended Use) - the declared characteristics (or not) - the level of attestation system
Specifies the producer’s role and the role of the organisms of control (Notified Bodies)
Tasks to do and levels of certification
Standard hEN : Evaluation of conformity
Defines the Initial Type Test and the way of establishing the conformity of the manufactured product
Defines the Factory Production Control
Contains the Appendix ZA which becomes obligatory after the edition of the Official Paper and gives practical details of the CE Marking
Tasks to do and levels of certification
Initial type testing (evaluation) Test on manufactured samples Audit test on samples Internal control of production Initial inspection of manufacturing and
internal control by a notified body Continuous supervision, evaluation and
judgement of the internal control of manufacturing by a notified body
Tasks to do
Tasks to do and levels of certification
4 levels of certification are foreseen According to the level, the tasks to be done
by the notified body are more or less important
Tasks to do and levels of certification
Levels of certification
Tasks to do and levels of certification
1+
1 2+ 2 3 4
Tasks for the producer1. Factory Production Control (FPC)
yes yes yes yes yes yes
2. Test on samples yes yes yes x x x
3. Initial Type Testing (ITT) x x yes yes x yes
Tasks for the notified body
4. Initial Type Testing (ITT)yes yes x x yes x
5. Initial inspecion of FPC yes yes yes yes x x
6. Inspection of FPC yes yes yes x x x
7. Test on samples from the factory yes x x x x x
Notified body
Organism of certification, inspection and test laboratory approved by a state member of the E.U. for a specific work
Notified by a state member of the EU
Published by the European Committee
Tasks to do and levels of certification
The CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
The CE Marking
Represents the fact that the product fulfils the DPC’s requirements, as mentioned in the different harmonized standards or the ETA’s
Indicates that the product has been properly evaluated regarding the conformity contained in the CPD
0123
CE Sign of conformity
Identification of the notified organism
Any Company
The registered address
Any Factory
Year 99
0123-CPD-0456EN 197-1
CEM I 42,5R
Identification of the producer
Registered address of the producer
Name or identification of the plant of manufacturing
Year
Identification of the certificate of conformity
Reference of the European Standard
Type and class of the product
The CE Marking
Datas to indicate
Apposition of the CE Marking
How ?- Visibly- Readable- In order to be indelebile
Where ?- Directly on the product- On a fixed label- On the packaging- On the commercial delivery documents- On a website
The CE Marking
The CE Marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
CEN TC 129 «Glass in Building»– Deals about the usual glass products– Harmonized standards of products (evaluation
of the conformity)– Support standards (product description, test and
calculation systems)
CE Marking of the glass products
CEN TC 129 – Basis products– EN 572-9: soda lime silicate glass (float, patterned,
wired, profiled, drawn sheet glass)– EN 1748-1-2: borosilicate glass– EN 1748-2-2: glass ceramic– EN 14178-2: earth alkaline silicate glass
CE Marking of the glass products
CEN TC 129 – Reinforced products– EN 12150-2: thermally toughened soda lime silicate
safety glass– EN 12337-2: chemically strenghened soda lime
silicate glass– EN 1863-2: heat strenghened soda lime silicate glass– EN 14179-2: Heat Soaked thermally toughened soda
lime silicate safety glass– EN 13024-2: thermally toughened boro silicate safety
glass– EN 14321-2: thermally toughened alkaline earth
silicate safety glass
CE Marking of the glass products
CEN TC 129 – Laminated glass– EN 14449: Laminated glass and safety glass
CE Marking of the glass products
CEN TC 129 – Insulating glass– EN 1279-5: Insulating glass unit
CEN TC 129 – Coated glass– EN 1096-4: Coated glass
CEN TC 129 – Mirrors– EN 1036-2: Mirrors from silver-coated float glass for
internal use
CE Marking of the glass products
CEN TC 129 – Glass blocks– EN 1051-2: Glass blocks and glass paver units
•Anything Else
•Reaction to Fire
•External Fire
Performance
•Safety in Use
•Noise Reduction
•Energy Conservation
•Fire Resistance
•Bullet Resistance
•Explosion Resistance
N AN AN AX-X4
N AN AN AXX-3
XXXXX-1
•Anything Else
•Reaction to Fire
•External Fire
Performance
•Safety in Use
•Noise Reduction
•Energy Conservation
•Fire Resistance
•Bullet Resistance
•Explosion Resistance
N AN AN AX-X4
N AN AN AXX-3
XXXXX-1
Notified Body
Continous
Surveillance
Notified Body
Inspection of FPC
docs
Notified Body
Initial Inspection of Factory
ProducerNotified
Body
Producer Notified Body
Continous
Surveillance
Notified Body
Inspection of FPC
docs
Notified Body
Initial Inspection of Factory
ProducerNotified
Body
Producer
FPC(Factory Production Control)
ITT(Initial Type Testing)
FPC(Factory Production Control)
ITT(Initial Type Testing)
System
of
Attestation
Intended
Use
System
of
Attestation
Intended
Use
CE Marking of the glass products
Annex ZAIntended use
ZA.1
System of Attestation
of Conformity ZA.2CE Mark Claimed
performance ZA.3
ResistanceYes
No
EN 13501-2
NPD
11
ReactionYes
No
EN 13501-1
NPD
3 OR 42
BulletYes
No
EN 1063
NPD
14
BulletYes
No
EN 1063
NPD
14
ExternalYes
No
EN 13501-5
NPD
3 OR 43
Body ImpactYes
No
EN 12600
NPD
37
Body ImpactYes
No
EN 12600
NPD
37
ExplosionYes
No
EN 13541
NPD
15
ExplosionYes
No
EN 13541
NPD
15
BurglarYes
No
EN 356
NPD
36
BurglarYes
No
EN 356
NPD
36
Thermal StressYes
No
Product Standard
NPD
38
Thermal StressYes
No
Product Standard
NPD
38
Mech. resistanceYes
No
Product Standard
NPD
39
Mech. resistanceYes
No
Product Standard
NPD
39
Sound ReductionYes
No
EN 12758
NPD
310
ThermalYes
No
EN 673
NPD
311
LightYes
No
EN 410
NPD
312
SolarYes
No
EN 410
NPD
313
Safety in Use
Energy Conservation
Protection against Noise
Safety in case of Fire
EOTA– ETAG 002 «Structural sealant glazing»
CE Marking of the glass products
CE marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
– Communication of 13 characteristics– ITT and test reports
In practice
AGC Flat Glass Europe must communicate about the products: First part of the information is on the product labels
The 13 glass characteristics are available on the website www.YourGlass.com (available for everybody)
In practice
YourGlass - PDF files
YourGlass - Product Finder
YourGlass – Glass Configurator
In practice
In practice
In practice
PDF file
Easy
Allow to reach all information for monolithic products in 1 operation
Only possible for «monolithic products», not to cover all possibilities of laminated glass and DGU
Tables only in English, with translation list
In practice
YourGlass - PDF files
YourGlass - Product Finder
YourGlass – Glass Configurator
In practice
In practice
In practice
Product Finder
Allow to print a datasheet for 1 specific product
Available in 22 languages
In practice
In practice
YourGlass - PDF files
YourGlass - Product Finder
YourGlass – Glass Configurator
In practice
Marquage CE
In practice
YourGlass - PDF files
YourGlass - Product Finder
YourGlass – Glass Configurator
CE marking
The Directive for building products (DPC) Aims of the CE marking The ways to obtain the CE marking Tasks to do and levels of certification CE marking CE marking of the glass products In practice
– Communication of 13 characteristics– ITT and test reports
In practice
ITT are in the button «Quality».
In practice
In practice
Performances certificates are in the button «Quality» or «Certificates».
In practice
ITT et test reports
The test reports and the certificates of performances are available on the website only for AGC people
It is internal information
It is necessary to use his password to acces to these reports
In practice