CE N NATIONAL INSTITUTE FOR INDUSTRIAL ENVIRONMENT AND RISK

-decree nr 90-1089, 7 December 1990 --order from the Minister of Industry, 20 December 1996-

EXPLOSIVES FOR CML USES

I - ADDITION C3 TO THE EC TYPE-EXAM INA TrON CERTIFICATE

2- 0080.EXP.05.0047

3 - This certificate is relating to the following product: Shaped charges CE Type 1502 (90 items referenced in the table)

4- This product is manufactured by:

TIT AN ENERGETICS 143 HCR4361 MILFORD, TEXAS 76670 (USA)

The applicant for the examination is :

TITAN ENERGETICS A Division of Titan Specialties Ltd. 143 HCR 4361 MILFORD. TEXAS 76670 (USA)

represented in the European Union by: SPECIAL CARGO SERVICES BV Breguetlaan 7, Sky Park, Oude Meer P.O. Box 75709 I 1 I 8 ZT Scbiphol Airport The Netherlands Attn: Mr. Hubert den Dikken Phone: 31 (0) 20-655 6262

5 - The above named product is specified in the enclosed appendix.

6- The National Institute for [ndustrial Environment and Risk (INERIS), notified with the identification number 0080 in accordance with the article 6.2 of the Council Directive 93115/EEC, 5 April 1993. testifies that :

The above named product model is recognized to confonn to Essential Safety Requirements as defined in annex I of that Directive.

7- (n addition to the EC type-examination (module B) defined in annex U of the Directive, the applicant has retained the assessment of the Conformity to type (module C) defined in the same annex.

8- This addition is to be attached to the certificate 0080.EXP.05.0047, dated December 9, 2005.

INE-RIS Psrc Te.::hnoloplaue ALATA • B.P. N" 2

F-60550 verneuil-en-Halatte nl m (013 A' ss 66 11 • Fax • 33 (0)3 44 ss 66 99

SIAET 381 984 921 00019 -APE 743 B l<lrtlM t~Jtionll de r~r.lll'fontnt Jlldurtlld ct dd r&qun

Vemeuil-en-Halatte, September 27,20 I 0

The Chief Executive Officer ofTNERlS By delegation, the Certification Division, Mannger

C.MICHOT

Pare Technologfque Alata BP 2 F-60550 Verneuil-e11-Hal?.tle tel +33(0)3 44 55 66 77 fax +33(0)3 44 55 66 99 internet www.ineris.fr

Jns tilut na~ional de l'envlronnem~tnt industriel et des rlsques

I

<E: I I NATIONAL INSTITUTE FOR INDUSTRIAL ENVIRONMENT AND RISK

- decree nr 90-1 089, 7 December 1990 -- order from Lhe MinisLer of [ndustry, 20 December 1996-

Appendix to the addition C3 to the EC type-examination certificate nr 0080.EXP.05.0047

A 1 - PRODUCT NAME

A2 - PRODUCT DESCRIPTION : general identification :

-family

-sub-family

-explosive type I mass -diameter -height -total mass -manufacturer's references

characteristics :

- mean penetration in

concrete target

general conditions :

-shelf life - limit temperature for use

-limit temperatures/hygrometry for storage

AJ - DOCUMENTATION :

- examination report

A4 -PARTICULAR CONDITIONS FOR USE:

Shaped charges named CE Type 15 02 90 items referenced in the table

shaped charge

shaped charge, open

see table see table see table INE-RIS see table see table

see table

10 years see table

Pare Technologlque ALATA- B.P. N- 2 F-60550 Verneuil-en-Halatte

Ul. +33 (013 « 55 66 77- Fax + 33 (0)3 44 55 66 99 SIRET 381 984 921 00019 - APE 743 B

lnstitlll n•tlon•l dt l'tnvltOIIMIIItnt lndusttkl tt del tllqUtl

- 3 ooc I + 60°C I 90 % RH max

reference DCE-2003-43529-JMo/ST-Ag CE 5112

date 25/03/2003

origin lNERlS

as specified by TITAN COMPLETION PRODUCTS in the oil well industry

AS ~MARKrNG :

- CE and symbol of Notified Body in conformity with paras I and 4 of module C in

annex II of the Directive -others batch number, certificate nr

Pare Technologique Alata BP 2 F-60550 Verneuil-en-Halatte I~ olio 2(7

tel +33(0)3 44 55 66 77 fax +33(0)3 44 55 66 99 internet www.ineridr

lnstitut national de l"environnement industriel et des risques

CE NA110NAL INSTITUTE FOR INDUSTRIAL ENVIRONMENT AND RISK

- dccrt:t: nr lJ0-1 089, 7 December 1990-- order from the Minister of lnduslry, 20 December 1996 -

Appendix to the addition C3 to the EC type-examination certificate or 0080.EXP.OS.0047

Shaped charges CE Type 1502

Part. Number I Explosives Diameter Height

Prod.uct Name Manufacturer's Total mass,

Reference g

Type Mass, g mm lD. mm Ul.

CHARGE 2·314" 15G RDX SDP PRO EXP·2715·320T RDX 12,0 37,6 1,5 43,2 1,7 151.5

CHARGE 2·3/4" 150 RDX SDP PROEX EXP·2715·322T RDX 12,0 37,6 1,5 43,2 1,7 160,5

CHARGE 2·3/4" l6G RDX SDP EXP·2715·323T RDX 14,0 37,6 1.5 43,2 1.7 160,2

CHARGE 2·3/4" 15G HMX SDP EXP·2715·423T HMX 14,0 37,6 1,5 4..3,2 1,7 160,2

CHARGE 2·3/411 l5G HMX SDP PRO EXP·2715·420T HMX 12,0 37,6 1,5 43,2 1,7 150,5

CHARGE 2·3/4" 15G HMX SDP PROEX EXP·2716·422T HMX 12,0 37,6 1,5 43,2 1.7 159,5

CHARGE 2·3/4" 15G HNS DP GUNSLINGER EXP·2715·522T HNS 12,0 37,6 1,6 43,2 1.7 160,2

CHARGE 2·3/4" 15G RDX SDP PERFECTA EXP-2716-321 T RDX 12,0 37,6 1,5 43,2 1,7 160,2

CHARGE 2·3/4" 15G RDX SDP PERFECTA EXP·2716-421T HMX 12,0 37,6 1,5 43,2 1,7 160.2

CHARGE 2·718" 18G RDX SDP EXP·2818-321 T RDX 17,0 37,6 1,5 43,2 1,7 142,9

CHARGE 2·7/8" 18G HMX SDP EXP-2818·421 T HMX 17,0 37,6 1,5 43,2 1,7 160,2

CHARGE 3·1/8" 12G RDX SDP PRO EXP·3112·320T RDX 11,0 43,2 1,7 37,1 1,5 115,6

CHARGE 3·1/8" 12G RDX SDP GUNSLINGER EXP-3112·321 T RDX 11,0 43,2 1,7 37,1 1,5 151,7

CHARGE 3·1/8" 12G HMX SDP GUNSLINGER EXP·3112·421T HMX 11,0 43,2 1,7 37.1 1,5 151,7

CHARGE 3·1/8" 12G HNS SDP GUNSLINGER EXP·3112-521T HNS 11,0 43,2 1,7 37,1 1,5 115,9

CHARGE 3-118" 14G BDX SDP PRO EXP·3114·320T RDX 13.0 39,1 1,5 43,2 1,7 140,4

CHARGE 3·3/8" l9G RDX DP EXP EXP-3319·302 RDX 18,0 44,5 1,8 52,7 2,1 269,1

CHARGE 3·3/8" i9G JIDX SDP PROEX EXP·3319·322T RDX 18,0 44,5 1,8 52,7 2,1 278,9 -

INE-RIS Pare Teeknologlque AlATA- B.P. N°;

F-60550 Verneuil-en-HalattE Tel. +3l (0)3 "ss 66 n . Fax • 33 (0)3 "ss 66 g.

SIRET 381 984 921 00019 ·APE 743 I lflltllut national dr l'environntmtnt lnciu1tritl tt del risque

Minimum Running Limit Average Penetration in Temperatu1

Concrete Target for Use

Ma mm in. oc

Hou

569,0 22,4 162 1

660,4 26,0 162 1

650,2 25,6 162 1

650,2 25,6 204 1

602,0 23,7 204 1 632,5 24,9 204 1

495,3 19,5 260 1

495,3 19,5 162 1

495,3 19.5 204 1

779,8 30,7 162 1

820,4 32,3 204 1

546,1 21,5 162 1

617,0 24,3 162 1

617,0 24,3 204 1

551,2 21,7 260 1

546,1 21,5 162 1

477,5 18,8 162 1 848,4 33,4. 162 ~ -·-···---

Folio 317

<E NATIONAL INSTITUTE FOR INDUSTRIAL ENVIRONMENT AND RISK

- tlr::crce nr 90-1089. 7 Dct:ember 1990-- order from the Minister of Industry. 20 Decc:mbcr 1996-

Appendix to the addition C3 to the EC type-examination certificate or 0080.EXP.05.0047

Shaped charges CE Type 1502

Part Number I Explosives Diameter Height

Product Name Manufacturer's Total mass,

Reference g

Type Mass, g mm m. mm ln.

CHARGE 3·3/8" 190 RDX OH PRO EXP·3319·331 RDX 18.0 44.5 L,8 52,7 2,1 272,9

CHARGE 3·3/8" 190 HMX DP EXP EXP·3319·402 HMX 18,0 44,5 1,8 52,7 2,1 269,1

CHARGE 3·3/8~ 19G HMX SDP PROEX EXP·3319·422T HMX 18,0 44,5 1,8 52,7 2,1 277,4

CHARGE 3·3/8" 190 HMX GH PRO EXP-3319·431 HMX 18,0 44,5 1,8 52,7 2,1 267,4

CHARGE 3·3/8" 21G RDX SDP PRO EXP·3321·321T RDX 20,0 44,5 1,8 52,7 2,1 278,2

CHARGE 3·3/8" 21G HMX SDP PRO EXP·3321·421T HMX 20,0 44,5 1,8 52,7 2,1 278,2

CHARGE 3·3/8" 21G HNS SDP PRO EXP·3321·521T HNS 21,0 44,5 1,8 52,7 2,1 278,2

CHARGE 3·3/8" 22. 7G RDX DP PRO EX EXP·3323·301T RDX 22,0 44,5 1,8 52,7 2,1 274,9

CHARGE 3·3/8" 22.70 RDX DP EXP EXP·3323·302 RDX 22,0 44,5 1,8 52,7 2,1 272,8

CHARGE 3·3/8" 22.70 RDX SDP PRO EXP·3323·320T RDX 20,0 44.5 1,8 52,7 2,1 278,9

CHARGE 3·3/8" 22.7G RDX SDP PRO EXP·3323·321T RDX

CHARGE 3·3/8" 22.70 RDX SDP PROEX EXP·3323·322T RDX 19,0 44,5 1.8 52,7 2,1 280,9

CHARGE 3·3/8" 22.7G RDX SDP E:XP·3323·323T RDX 22,0 44,5 1,8 52,7 2,1 283,5 CHARGE 3·3/8" 22.7G HMX SDP EXP·3323·423T HMX 22,0 44,5 1,8 62,7 2,1 280,0

CHARGE 3·3/8" 22.7G RDX GH PRO EXP·3323·331 RDX 20,0 44,5 1,8 52,7 2,1 274,9

CHARGE 3·3/8" 22.7G RDX SDP PRO (.35) EXP·3323·36I T RDX 20,0 44,5 1,8 52,7 2,1 288,9

CHARGE 3·318" 22.7G HMX DP PROEX EXP·3323·401T HMX 20,0 44,5 1,8 52,7 2,1 279,8

CHARGE 3--!MS" 22.7G RMXDP E.XP EXP·3323·402 HMX 20.0 44,5 1.8 52.7 2,1 272,8

INE~IS Pare Technologlque ALAT.A • ll.P. N° 2

F-60550 Verneui 1-en·Hal<~tte Tel. +l3 (0)3 44 55 66 77 • Fax+ 33 (0)3 44 55 66 99

SIRET 381 984 921 00019 ·APE 743 8 lnrtltll! national dt I'M,.jronntment lndunrfel t1 dtt tllqu••

Minimum Running Limit Avenge Penetration in Temperatu:

Concrete Target for Use

Ma mm 1n. oc

Hot

642,6 25,3 162 1

477,5 18,8 204 1

904,2 35,6 204 1

599,4 23,6 204 1

911,9 35,9 162 1

970,3 38,2 204 1

970,3 38.2 260 1

591,8 23,3 162 l

403,9 15,9 162 1

706,1 27,8 162 I

162 1

904,2 35,6 162 1 947,4 37,3 162 1

1008,4 39,7 204 1

604,5 23,8 162 1

762,0 30,0 162 1

591.8 23,3 204 l

403,9 15,9 204 .l

Folio 4n

<E ! ~PlosNe~

NATIONtlL INSTITUTE FOR INDUSTRIAL ENVIRONMENT AND RiSK INE-RIS - decree nr 90-1089, 7 December 1990-

- ord¢r from the:: Minister of Industry, 20 Dc::cember 1996 - l'arc Technologlque ALATA- B.P. N• 2 F-60550 Verneuif-en~Halatte

Appendix. to tbe addition C3 to the EC type-examination certificate nr 0080.EXP.05.0047 n1. +33 !ol3 44 ss 66 n. F~ + 33 to)3 •• ss 66 99 SIRET 381 984 921 00019- APE 743 8

Shaped charges CE Type 1502 IM11tut natia<>af dt rtm4fOMPtn<nl lfiCiurtr~l tl dts (dqlle

Minimunl Running Limit

Part Number I Explosives Diameter Height Average Penetration in Tempex·atuJ

Product Name Manufacturer's Total mass, Concrete Target for Use

Reference g

Type Mass. g .

in. in. oc Ma Dlm. m. mm mm Ho1:

CHARGE 3·3/8" 22.70 HMX SDP PRO EXP·3323·420T HMX 20,0 4~5 1,8 52,7 2,1 276,4 696,0 27,4 204 1

CHARGE 3·3/8" 22.7G HMX SDP PRO EXP-3323·421T HMX 20,0 44,5 1,8 52,7 2,1 276,4 696.0 27,4 204 1

CHARGE 3·3/8" 22.70 HMX SOP PROEX EXP-3323·4221' HMX 19,0 44,5 1,8 52,7 2,1 278,4 904,2 35,6 204 1

CHARGE 3·3/8'' 22.7G HMX SDP EXP·3323-423T IDviX 22,7 44,5 1,8 52,7 2,1 278,4 904,2 35,6 204 1

CHARGE 3·3/8'' 22.7G HMX GH PRO EXP-3323·431 HMX 20,0 44,5 1,8 52,7 2,1 273,9 635,0 25,0 204 1

CHARGE 3·3/8" 22.7G HMX SDP PRO EXP·3323·461 T HMX 20,0 44,5 1,8 52,7 2,1 289,0 762,0 30,0 204 1

CHARGE 3·3/8" 22.7G HNS SDP PROEX EXP·3323·622T HNS 20,0 44,5 1,8 52,7 2,1 279,9 678,2 26,7 260 1

CHARGE 3·3/8" 22.7G HNS SDP EXP·3323·523T HNS 22,7 44,5 1,8 52,7 2,1 279,9 678,2 26,7 260 1 CHARGE 3·3/8" 25G RDX SDP PRO EXP·3325·321T RDX 24,0 44,5 1,8 52,7 2,1 282,6 1033,8 40,7 162 1

CHARGE 3·3/8" 25G RDX GH PRO EXP-3325·331 RDX 24,0 44,5 1,8 52,7 2,1 270.6 609,6 24,0 162 1

CHARGE 3·3/SN 25G HMX SDP PRO EXP·3325·421T HMX 24,0 44,5 1,8 52,7 2,1 282,6 1033,8 40,7 204 . 1

CHARGE 3·3/8" 25G HMX GH PRO EXP-3325·431 HMX 24,0 44,5 1,8 52,7 2,1 270,6 665,5 26,2 204 1 CHARGE 3·3/8" 25G HNS SDP PROSPECTOR EXP·3325·521T HNS 24,0 44,5 1.8 55,0 2,2 283,0 774,7 30,5 260 1

CHARGE 3·318"' 25G HNS GH EXP-3325·531 HNS 24,0 44,5 1,8 55,0 2,2 270,6 457,2 18,0 260 1

CHARGE 3·3/8'' 260 RDX SDP PRO EXP·3326·3211' RDX 25,0 44,5 1,8 55,0 2,2 283.6 1099,8 43,3 162 1

CHARGE 3·318" 26G H.'\'lX SDP PRO EXP-3326·421 T HMX 25,0 44,5 1,8 55.0 2,2 283,6 1099,8 43,3 204 1

C.B.ARG'E 3'3l8" 320 RDX DP PRO EXP-3332·300 RDX 31,0 46,7 1,8 53,8 2,1 245,5 533,4 21,0 162 l

.C.HAH1G.f: 3--"af$'' ~2G fiDX .SDP PRO EXP·3332·308T RDX 3t,O 44,5 1,8 55,0 2.2 219,8 563.9 22,2 162 1

CRABGE 3 ·..318'' '320 IIDX SD.P PRO EXP·3332·320T _. RDX 31.0 46,7 1,8 53,8 2,1 260,5 856,0 33.7 162 1 --··- --·- ·-----· ··-

Folio 517

CE NA 1'/0NAL INSTITUTE FOR INDUSTRiAL ENVIRONMENT AND RiSK

- decree nr 90-1089, 7 l)eccmber 1990--order from the Minister oflndustry, 20 December 1996-

Appendix to the addition C3 to the EC type-examination certificate nr 0080.EXP.05.0047

Shaped charges CE Type 1502

Pal't Number I Explosives Diameter Height Product Nanle Manufacturer's

Total mass,

Reference g

Type Mass, g mm tn. mm in.

CHARGE 4" · 5" 50 RDX SQUEEZE EXP·4006·3Q1 RDX 3,8 23,7 0,9 28,3 1,1 65,4

C'H.ARGE 4" 16G RDX GH NSG EXP-4016·302 RDX 15,0 43,2 l,7 45,7 1,8 235,5

CHARGE 4" 19G RDX DP NSG EXP·4019·301 RDX 18,0 52,3 2,1 65,5 2,6 238,5

CHARGE 4" 23G RDX DP NSG EXP-4023·301 RDX 21 ,0 43,9 1,7 45,7 1,8 240,3

CHARGE 4" 320 RDX EXP·4032·301 RDX 30,0 53,6 2.1 61,8 2,4 435,4

CHARGE 4" 360 RDX DP EXP EXP·4036·301 RDX 33,5 53,6 2,1 61,8 2,4 449,4

CHARGE 4" 36G RDX SDP PRO B:XP·4036·328T RDX 33,5 53,6 2,1 61,8 2,4 445,4

CHARGE 4" 38.50 RDX SDP GUNSLINGER EXP-4039·321 T RDX 37,5 53,6 2,1 61,8 2,4 454,9

CHARGE 4'' 38.5G RDX SOP PRO EXP·4039·328T RDX 38,0 53,6 2,1 61,8 2,4 457,9

CHAHGE 41' 38.50 HMX SDP GUNSUNGER gXP-4039·421 T HMX 37,5 53,6 2, l 61,8 2,4 454,9

CHARGE 4" 38.5G HMX SDP PRO EXP·4039·428T HMX 36,5 53,6 2,1 61,8 2,4 447,9

CHARGE 4·1/2'' 210 RDX SDP PRO EXP-4521·320T RDX 20,0 43,2 1,7 52,4 2.1 217,2

CHARGE 4·1/2'' 21G RDX SDP PROEX EXP-4621·322T RDX 20,0 43,2 1,7 52,4 2,1 225,2

CHARGE 4·112'' 21G RDX SDP EXP·4521· 323T RDX 20,0 43,2 1,7 52,4 2,1 226,9

CHA.RCE 4-vz~ 21G RDX DP EXP EXP-4521·331 RDX 20,0 43,2 1,7 52,4 2,1 217,9

CHARGE 4·112" 21G HMX SDP PRO EXP-4521·420T HMX 20,0 43,2 1,7 52,4 2,1 218,2

CHARGE 4~1/2'' 21G HMX SDP PROEX EXP-4521·4221' HMX 20.0 43,2 1.7 52,4 2,1 225,2

.CH.~~GE 4-112'' 21G HMX SDP EXP-4521·423T HMX 20,0 43,2 1,7 52.4 2,1 226.9 --- -- - ----- ··-·-·----··-- -

INE-RIS Pare TechnologiQUe ALATA- B.P. W 2

F-60550 Verneuil-en-Halatte T61. +33 (0)3 44 55 66 n . Fax + 33 10)3 44 ss 66 99

SIRET 381 984 921 00019 ·APE 743 B lnnilut n.li~t dt l'tn'lironntmtnt lllduttritl t1 dtl rlrqUt.l

l\llinimum Running Limit Average Penet.ration in Tempera tut

Concrete Target for Use

Ma mm in. •c Hou

129.5 5,1 162 1

510,5 20,1 162 1 474,0 18,66 162 1

457,2 18 162 1

797,6 31,4 162 1

581,7 22,9 162 1

980,4 38,6 162 l

1206,5 47,5 162 1

1013,5 39,9 162 1

1206,5 47,5 204 1

939,8 37 204 1

655,3 25,8 162 1

721,4 28,4 l62 1

871.2 34,3 162 1

541,0 21,3 L62 1

678,2 26,7 204 1

756,9 29,8 204 1

871,2 34,3 204 1

Folio6n

<E NttTIONAL INSTITUTE FOR /NDUSTR!At l:.NVIRONMENTAND RISK

-deere~ nr <)0-1 089. 7 December I 990 • - order from th~ Minist~r of Industry, 20 December 1996 -

Appendix to tbe addition C3 to the EC type-examination certificate or 0080.EXP.OS.0047

Shaped charges CE Type 1502

Part Number I Explosives Diameter Height

Product Name Manufacturer's Total mass,

Reference g

Type Mass, g mm in. mm in.

CHARGE 4·1/2" 210 HMX DP EXP EXP·4521·431 HMX 20,0 43.2 1.7 52.4 2,1 217.9

CHARGE 4·1/2" 21G fiNS SDP PROEX EXP·4521·522T HNS 20,0 43,2 1,7 52,4 2,1 226,9

CHARGE 4·1/2" 210 HNS SDP EXP·4521·523T HNS 21,0 43,2 1,7 52,4 2,1 226,9

CHARGE 4·112" 21G HNS DP EXP EXP·4621·531 HNS 20,0 43,2 1,7 52,4 2,1 217,9

CHARGE 4·112" 38.50 RDX DP PRO EXP·4539·321 T RDX 38,0 50,8 2,0 71,1 2,8 467,4

CHARGE 4·1/2" 38.50 RDX SDP PRO EXP·4539·323T RDX 38,0 50,8 2,0 71,1 2,8 481,9

CHARGE 4·1/2" 38.5G RDX SDP PROEX EXP·4539·324T RDX 36,5 50,8 2,0 71,1 2,8 476,9

CHARGE 4·1/2" 38.5G RDX GUNSLINGER EXP·4539·325T RDX 38,5 50,8 2,0 71,1 2,8 476,9

CHARGE 4·1/2" 38.5G HMX DP PRO EXP·4539·421T HMX 38,0 50,8 2,0 71,1 2.8 476,9

CHARGE 4·1/2" 38.5G HMX SDP PRO ll:XP·4539·423T FIN.1X 38,0 50,8 2,0 71,1 2,8 477,9

CHARGE 4·112" 38.5G HMX SDP PROEX EXP·4539·424T HMX 36,5 50,8 2,0 71,1 2,8 477,9

CHARGE 4·lf2Jt 38.50 HMX EXP·4539·425T BMX 38,5 50,8 2,0 71,1 2,8 476,9

CHARGE 4·1i2'' 38.50 HNS SDP PRO EXP·4539·523T HNS 38,5 50,8 2.0 71.1 2.8 494,2

CHARGE 6" 32G RDX DP EXP·6032·308 RDX 31,0 53,6 2,1 61,7 2,4 1l34.3

CHARGE 6' ~ JIDX CJDP EXP·6034·300 RDX 33,0 53,6 2,1 61,7 2,4 436,3

CJiA.RGE T" 38.6G RD.X Gli OUTLAW EXP·7039·33l RDX 37,5 53,6 2,1 61.7 2,4 429.4

CHAE.GE 1"' 3S.5G RDX GH OUTLAW U EXP·7039·332 RDX 37,5 53.6 2,1 61,7 2,4 423,5

INE-RIS Pare Technologlque ALA'rA - B.P. W :

F-60550 Verneuil-en-Halattf T~L t33 (0)3 44 5S 66 77 · Fa~ + 33 (0)3 44 55 66 9'

SIRET 381 984 921 00019 ·APE. 743 I tnrtllut Mtional dt l'tn'llronntmenr lndurtrlrl tt des risque

Minimum Running Limit Average Penetration in Temperatw

Concrete Target for Use

Ma mm in. oc Hou

539,8 21,3 204 1

541,0 21,3 260 1

541,0 21,3 260 1

539,8 21,3 260 1

962,7 37.9 162 1

1066,8 42 162 l

1280,2 50,4 162 1

1280,2 50,4 162 1

962,7 37,9 204 1

1069,3 42,1 204 1

1280,2 50,4 204 1

1280,2 50,4 204 1

688,3 27,1 260 1

591,8 23,3 162 1

447.0 17,6 162 1

711,2 28.0 162 1

812,8 32.0 162 1

folio 7/7