ceas symposium program

CEAS 2015: Conference programme Technical sessions

1

Main

Auditorium Senate room

van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Monday 7 September 2015

10:00 - 11:00 Opening ceremony

11:30 - 12:30 Keynote 'Challenges for the European Aeronautical Industry' Axel Flaig, Head of R&T Airbus & Hans Buethker, Chairman & CEO Fokker Technologies

13:30 - 14:30 Keynote 'Challenges for European Access to Space' Franco Ongaro, Director TEC & head ESA-ESTEC & Arnaud de Jong, CEO Airbus Defense and Space Netherlands

14:30 - 16:00 Eco Design & Space

Aircraft Design Methodology 1 Flight Control 1 Aerodynamics Remotely Piloted

Aircraft Systems 1

EU-project Pulsed Chemical Rocket with Green High

Performance Propellants (PulCheR) workshop

62 41 187 37 18

Ecodesign for space and

aerospace: what happens when we make ecodesign

relevant for demanding

applications?

A multidisciplinary design

optimization advisory system for

aircraft design

Continuous Measurement of

Perceived Visual/Inertial

Motion Coherence in a Motion Simulator

Fuselage aerodynamic drag prediction method

by cfd

Comparative study of European RPAS

regulations

Brief overview of the PulCheR Project

Pettersen, Johan Berg

(Asplan Viak)

Hoogreef, Maurice (Delft University of

Technology)

Cleij, Diane (Max Planck Institute for

Biological Cybernetics)

Della Vecchia, Pierluigi (University of Naples

Federico II"")

Cuerno-Rejado, Cristina (Technical

University of Madrid)

Angelo Pasini (Sitael S.p.A.)


2

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Bergsdal, H. (Asplan Viak), Bjørnbet, M.M.

(Sintef Raufoss Manufacturing), Silva, E.J. (ISQ), Ringen, G.

(Sintef Raufoss Manufacturing),

Estrela, M.A. (ISQ)

D'Ippolito,R. (Noesis Solutions), La Rocca, G. (Delft University of

Technology)

Venrooij, J. (Max Planck Institute for

Biological Cybernetics), Pretto,

P. (Max Planck Institute for Biological

Cybernetics), Pool, D.M. (Delft University

of Technology), Mulder, M. (Delft

University of Technology), Bülthoff,

H.H. (Max Planck Institute for Biological

Cybernetics)

Nicolosi, F., Ciliberti, D., Cusati, V.

(University of Naples)

Cresto Aleina, S., Viola, N. (Politecnico

di Torino)

140 125 87 74 21

Eco-Space Project - Environmental Impact of new technologies

Global-local Knowledge Coupling to

Support Airframe Design

On the minimization of

cruise drag due to pitch trim

Numerical and Experimental

Investigations on Subsonic Air Intakes

with Serpentine Ducts for UAV Configurations

Design of UAV for photogrammetric

mission in Antarctic area

High frequency pulses: a feasible

way of making propulsion?

Saint-Amand, Maud (Airbus Defence and

Space)

Wang, Haiqiang (Delft University of Technology)

Campos, Luis (Instituto Superior

Técnico)

Berens, Thomas (Airbus Defence and Space)

Goetzendorf-Grabowski, Tomasz

(Warsaw University of Technology)



3

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Ouziel, J.O. (Airbus Defence & Space)

La Rocca, G. (Delft University of

technology), Nicolosi, F., Attanasio, L.

(University of Naples Federico II"")

Marques, J.M.G.M. (Instituto Superior

Técnico)

Delot, A.L. (ONERA), Tormalm, M.M.

(Swedish Defence Research Agency

(FOI)), Ruiz-Calavera, L.P., Funes-Sebastian, D.E. (AIRBUS Defence and Space), Rein, M. (DLR), Säterskog, M.

(SAAB AB, Aeronautics)

Rodzewicz, M.R. (Warsaw University of

Technology)

228 194 147 133 23

Introducing eco-design to ESA - An

overview of the activities towards a coherent eco-design approach

An advanced aircraft design framework for

aircraft preliminary design and

optimization

Feasibility Study for a Tailless

Aircraft with Post Stall Maneuvering

Capability

Aerodynamic Validation of a

Parametric Airfoil Description

Methods of flight-path planning for

UAV photogrammetry

missions with consideration of aircraft dynamic

properties

High frequency pulses: a feasible

way of making propulsion?

Huesing (European

Space Agency)

De Marco, Agostino (University of Naples

Federico II"")

Krus, Petter (Linköping University)

Melin, Tomas (Linköpings Universitet)

Glowacki, Dominik (Warsaw University of

Technology)


-

Kozakiewicz, A.K., olejnik, A.O. (Military

University of Technology)

Staack, Munjulury, R.C., Melin, T

(Linköping University)

Gårdhagen, R. (Linköpings Universitet)

Hajduk, J.H. (Air Force Institute of

Technology), Rodzewicz, M.R.



4

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

16:30 - 18:00 Life Cycle Assessment

Aircraft Design Methodology 2 Flight Control 2 Flow Control Remotely Piloted

Aircraft Systems 2 PulCheR workshop

145 1 54 75 69

Integrating sustainability in

the design of space activities:

development of eco-design tools

for space projects

Methodology for the Validation of Loads in Rational Turning Analysis

Open Cavity Flow Control Using

Simultaneous Jets at the Separation and Impingement

Edges

Aerodynamic modelling of an

active flow control system for flapless flight control in the preliminary design

stages

Decision making for unmanned flight in

icing conditions

Green propellants: alternative to

Hydrazine and its derivatives

Chanoine, Augustin

(Deloitte)

Chorro Martínez, José Manuel (Airbus

Defence and Space)

Al Haddabi, Naser (University of

Glasgow)

Stadlberger, Korbinian (Technische Universität

München)

Armanini, Sophie (Delft University of

Technology)


Le Guern, Y., Witte,

F. (Deloitte)

Parra Adan, S., Martínez Pérez, A.D., Gómez Viñas, J.E., Juan Antonio, J.A.

(Airbus Group), Tito Carrillo, J. (Sertec)

- Hornung, M.

(Technische Universität München)

Lucas, A. (AOS Group), Whidborne, JF (Cranfield University)

237 49 163 117 71

Developing a standardised

methodology for space-specific Life Cycle Assessment

Collaborative aircraft design

using an integrated and distributed

multidisciplinary product

development process

A semi-empirical methodology for

balanced field length estimation

of jet-engined aircraft in early design phases

Assessment of Pulsed-Jet Actuators

to Increase Maximum Lift of a Mid-Range Aircraft

RPAS Systems Overview and

Configuration Tool


Hydrazine and its derivatives (continued)


5

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Austin (European Space Agency)

Moerland, Erwin (German Aerospace

Center DLR)

Angeiras, Tulio (Embraer)

Vos, Roelof (Delft University of Technology)

Gruber, Mario (Fach Hochschule Joanneum)


-

Daoud, F. (Airbus Defense & Space), Nagel B. (German Aerospace Center

DLR)

Orra, T.H. (Embraer), Paula, A.A., Mattos,

B.S. (Instituto Tecnológico de

Aeronáutica - ITA)

Bertels, F. G. A., Van Dijk, R. E. C. (Delft

University of Technology TUD)

Flühr, H.F., Kainrath, K.K., Jelinek-Nigitz,

H.J. (FH Joanneum), Fortner, R.F.,

Ritzinger, M.R. (AAI – Austrian Aeronautics

Industries Group)

241 150 186 201 81

?

Development of a certification

module tailored to Aircraft Multi Disciplinary Optimization

Online Parameter Estimation for

Envelope Expansion

Future wing Hybrid Laminar Flow

Control suction system design and

analysis

Progress in Inverted Joined

Wing Scaled Demnostrator Programme


Hydrazine and its derivatives (continued)

? (European Space

Agency) Schmollgruber, Peter

(ONERA) Nusrath, Khadeeja

(NAL)

Alderman, James (Airbus Group Innovations)

Galinski, Cezary (Institute of Aviation)


- Bartoli, N. (Onera), Gourinat, Y. (ISAE)

Basappa, K., Jatinder, Singh (NAL) -

Hajduk, J.H. (Air Force Institute of

Technology), Rodzewicz, M.R.


Tuesday 8 September 2015


6

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

08:00 - 09:00 Keynote 'Challenges to the European Airlines' Athar Husain Khan, CEO Association of European Airlines AEA & Peter Hartman, Vice-chairman Board of AirFrance/KLM

09:00 - 10:30 Air Transport 1 Aircraft Design: Configurations

Guidance & Navigation

Impact of Rockets on Atmosphere

Space Sustainability panel

session

CEAS Trustee Board meeting

67 91 174 154

Understanding Fleet Impacts of Formation Flight

Jumbo City Flyer

A High-Precision Position Turn-Table

as the Reference for Angular

Accelerometer Calibration Experiment

Impact of rocket launches on

chemical and aerosol

composition of the atmosphere

Panel session with the participation of

Boling, Bryan () Gangoli Rao, Arvind (Delft University of

Technology)

Jatiningrum, Dyah (Delft University of

Technology)

Sofiev, Mikhail (Finnish

Meteoeological Institute)

Liu, Y. (RWTH

Aachen University)

Eitelberg, G (DNW- German-Dutch Wind

Tunnels)

Lu, P., De Visser, C.C., van Paassen, M.M., Mulder, M.

(Delft University of Technology)

Wood, C (Finnish Meteorological

Institute), Vira, J., Kouznetsov, R. ,

Tarvainen, V. (Finnish Meteorological

Institute), Grenard, P., Ordonneau, G

(ONERA)

O. Sanchez (EU Interparliamentary

Space), K.-U. Schrogl (UN COPUOS, Legal),

J.-J. Tortora (Eurospace),

Th.Pesquet & H. Posch (ESA)

- 170 188 213


7

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

-

Aerodynamic Design and Shape

Optimization of Transonic Joined-

Wing Civil Transport

Methods and facilities to be used

to evaluate the aircraft flight and

navigation equipment in flight

tests

Dispersion and chemical

composition of Athena II rocket plumes: Model

simulations versus in-situ aircraft measurements

Panel session (continued)

- Zhang, Mengmeng (Royal Institute of

Technology)

Yakushev, Vyacheslav (Central

Aerohydrodynamic Institute TsAGI)

Bekki, Slimane (OVSQ)

-

Rizzi, R. A. (Royal Institute of

Technology), Nangia, R. K. N. (University of

Bristol)

Harin, E.G., Kopylov, I.A. (Flight Research

Institute)

Cariolle, D.C. (CERFACS), Guenot,

L.G. (Herakles), Murray, N.M.

(ESA/ESTEC), Toumi, R.T. (Imperial

College)

- 171 199 233

-

Characteristics of locked and free-

wheeling ducted fan based on wind

tunnel tests and CFD analyses

Implementation of GNSS-based RNAV-flight procedures –

quantification of potential benefits

for business aviation users

Findings and conclusions from the AtILA project

Panel session (continued)

- Rodzewicz, Miroslaw


Böck, Philipp (Intraplan Consult)

Murray (European Space Agency)


8

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

- Bogdanski, Krzysztof. (Warsaw University of

Technology)

Schubert, M. (Intraplan Consult

GmbH) -

11:00 - 12:30 Air Transport 2 Aircraft Design: Fundamentals Handling Qualities

Advanced Manufacturing for Space Applications

1

ESA Reusable Launch Vehicle Program panel

session


98 34 52 159

Autonomous flying: a must for

the future

Analysis Of Aircraft Configurations

Including Propagated

Uncertainties

Use of simulator motion feedback

for different classes of vehicle

dynamics in manual control

tasks

Optimisation of spacecraft component

topology and functionality

through additive manufacturing

IXV project from conception to

realization and follow-on

Graaff, Adriaan (AD

Cuenta) Pfeiffer, Till (German

Aerospace Center DLR)

Lu, Tao (Delft University of Technology)

Curtis Rouse, Mike (STFC) IXV Project Team

- Moerland, E., Böhnke, D. (German Aerospace

Center DLR)

Pool, D.M., Damveld, H.J., van Paassen, M.M., Mulder, M.


Scott, A.S. (RAL Space, STFC),

Collingwood, CC (STFC), Vick, V.S. (UK

Astronomy Technology Centre),

Greenway, P.G., Ward, K.W. (RAL

Space, STFC)

112 - 58 208


9

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Economical Assessment of

Commercial High-Speed Transport

-

Rotorcraft-Pilot Coupling Research

in Europe: A Success Story in

Collaboration

New green polymer composites

processed by Additive

Manufacturing for “clean space” applications



(continued)

Margaretic, Paula

(Airbus Operations) - Dieterich, Oliver

(Airbus Helicopters Germany)

Rinaldi, Marianna (University of Rome

Tor Vergata"")

Steelant, J.S. (Johan

Steelant) - Pavel, M.D. (Technical University of Delft)

Cacciotti, I. (University of Rome Niccolò Cusano""), Pambaguian, L.,

Ghidini, T. (European Space Agency ESA-ESTEC), Canala, V.,

Massarelli, V. (Mecaer Aviation Group),

Nanni, F. (University of Rome Tor Vergata"")

127 206 134 222


10

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Clusterization of airport cities and cluster dynamics

for an air passenger demand network topology forecast based on socio-economic

development scenario

Statistical Time and Market Predictive

Engineering Design (STAMPED)

Techniques for Preliminary Aircraft

Sizing

A distributed simulation

framework for rapid deployment

of research demonstrators

Additive Manufacturing for Space applications on European Space

Programs



(continued)

Terekhov, Ivan (German Aerospace

Center DLR)

Barrett, Ronald (The University of Kansas)

Entz, Ricardo (Airbus Defence and Space)

Bonvoisin (European Space Agency)

Gollnick, V G (DLR, Air Transportation

Systems) -

Tressoldi Moreira, Fernandes de Oliveira, Schubert, Dickmanns,

Stenzel, Scherer, Schwening (Airbus Defence and Space

GmbH)

-

13:30 - 14:30 Keynote 'Challenges in realizing a Single European Sky’ Florian Guillermet, Director SESAR JU & Paul Riemens, CEO LVNL

14:30 - 16:00 Air Traffic Control 1

Aircraft Design: Wing & Tail

Wind Tunnel Wall Interference

Space Technologies 1

Measurement Techniques


29 63 102 229 14


11

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Developing Generic Flight Schedules for

Airport Clusters

Study of a Simplified Methodology for a

Flexible Wing Design

Wind tunnel model support and wall

interference corrections in

DNW-HST- ensuring high data quality standards -

ESA Technology Programmes

Surface pressure measurements at a

Lambda wing at steady and pitching angle of attack at vortex dominated

flow including transonic effects

Bießlich, Peter (Hamburg University

of Technology)

Garcia, Luis Eduardo (Embraer)

Wubben, Frenk (German-Dutch Wind

Tunnels DNW)

Becker, Udo (European Space

Agency)

Wiggen, Stefan (German Aerospace

Center DLR)

Gollnick, V.G. (Hamburg University

of Technology)

Antunes, A. P., De Paula, A. A. (EMBRAER)

Takara, E.K. (Embraer) -

Klein,C. (DLR/ Institute of

Aerodynamics and Flow Technology), Sachs, W. (DLR/

Institute of Aerodynamics and Flow Technology), Henne, U. (DLR/

Institute of Aerodynamics and Flow Technology),

Nuhn, J. (DLR/Institute of Aeroelasticity)

100 123 116 230 -


12

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Integration of Mission Trajectory

Management functions into

CleanSky Technology

Evaluation Process

Design Methodology for Trailing-Edge

High-Lift Mechanisms

Investigations of ETW slotted wall

interference using the NASA CRM

model

Technology Transfer: The

impact os Space Solutions on Terrestrial

Applications

-

Cadot-Burillet, Delphine (Airbus

Operations)

Vos, Roelof (Delft University of Technology)

Kursakov, Innocentiy (Central

Aerohydrodynamic Institute TsAGI)

Diaz, Lluc (European Space Agency)

Seyfang, George (Formerly @ BAE

Systems)

Albert, M.A. (Airbus

Operations)

Zaccai, D. (Delft University of

Technology TUD)

Bosnyakov,S.M., Glazkov, S.A., Gorbushin, .A., Lysenkov, A.V., Matyash, S.V., Semenov, A.V.

(Central Aerohydrodynamic

Institute)

- -

110 191 169 231 220

Decision-making inconsistencies in ATC: an empirical investigation into

reasons for rejecting decision

support automation

Integration of a High-fidelity

Methodology for Tailplane Design into a Transport Airplane

Calculator

Guidance for scaled model testing on

regional jet design Horizon 2020

Dynamic Measurements on

the NASA CRM Model tested in

ETW


13

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Westin, Carl (Delft University of Technology)

Mattos, Bento (Instituto Tecnológico de Aeronáutica)

Portolon da Silva, Tiago (Instituto Tecnológico de Aeronáutica)

??? (EC) Hensch, Ann-Katrin

(European Transonic Windtunnel ETW)

Borst, C. (Delft Technical University), Hilburn, (Center for Human Performance

Research)

Secco, N.R.S., Paula, A.A (Instituto

Tecnológico de Aeronáutica)

Agrico de Paula, A.A.P. (Instituto Tecnológico de Aeronáutica)

- Quix, H. (ETW)

16:30 - 18:00 Air Traffic Control 2 Aircraft Systems 1

EU ESWIRP project - Turbulent / Laminar Flow

Testing


2

Remotely Piloted Aircraft Systems 3


141 138 26 224 109

An ecological flow-based

decision support tool for future 4D-

trajectory management by air traffic control

A Methodology to Enable Automatic 3D

Routing of Aircraft Electrical Wiring Interconnection

Systems

Experimental Investigation of

Small Scale Homogeneous

Isotropic Turbulence in

S1MA wind tunnel

Characterisation of Material

Demisability for Spacecraft

Components

Visual tracking of ground and air

targets

Klomp, Rolf (Delft University of Technology)

Zhu, Zaoxu (Delft University of Technology)

Bourgoin, Mickael (LEGI / CNRS)

Merrifield (Fluid Gravity Engineering)

Gafurov, Salimzhan (Samara State

Aerospace University)

- La Rocca,G. (), J.L. van Tooren, M. (University

of South Carolina)

Baudet, C.B., Mordant, N.M. (LEGI /

CNRS) -

Zakharov, K. (Samara State Aerospace

University)

142 177 113 225 120


14

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Solution Space-Based Complexity

Metric for ATC

An optional APU for passenger aircraft

Wind Tunnel Test For Breakthrough Laminar Aircraft Demonstrator

Europe at DNW-LLF

Impact of additive manufacturing on spacecraft engine

design

Autonomous planning and

replanning of a single Unmanned

Aerial Vehicle: strategies and

simulations

Mercado Velasco, Gustavo (Delft University of Technology)

Scholz, Dieter (Hamburg University of

Applied Sciences)

Artois, Koen (German-Dutch Wind Tunnels

DNW)

Hyde (European Space Agency)

Fusaro, Roberta (Politecnico di Torino)

Borst, C. (Delft University of Technology)

- Postma, J., Philipsen,

I. (German-Dutch Wind Tunnels DNW)

- Cresto Aleina, S.,

Viola, N. (Politecnico di Torino)

179 185 181 11 184

Air Traffic Flow Optimisation using

Wind Models

A methodological approach for the

Product Development

Process optimization of aircraft

components

High-Speed PIV Applied to the

Wake of the NASA CRM Model in ETW at High Re-Number Stall Conditions for Sub- and Transonic

Speeds

Advanced composite for

space applications: Design and

Structural Analysis of CFRP Electronics

Housing

Design, implementation and

evaluation of a system to support

Well Clear

Bil, Cees (RMIT

University)

Mulder, Bram (Delft University of Technology)

Konrath, Robert ()

Voicu, Raluca (Romanian Research

and Development Institute for Gas

Turbines COMOTI)

Theunissen, Erik (Netherlands Defence

Academy)


15

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Assaad, Z., Eberhard, A., Moore, M. (RMIT

University)

La Rocca, G. (Delft University of

Technology), De Jong, H., Van der Elst, S. (KE-

works)

- - Suarez, B (General

Atomics Aeronautical Systems Inc.)

18:30 - 20:00 Aeroelasticity Detailed Aircraft Design

Prognostics and Health

Management Complex Flows Clean Sky -

96 17 24 50 44

Automatic Generation of

Aeroelastic Simulation Models Combined with a Knowledge Based Mass Prediction

Design and analysis of the control and

stability of a Blended Wing Body aircraft

Impacts of a Prognostics and

Health Management

System on Aircraft Fleet Operating

Cost during Conceptual Design

Phase by using Parametric Estimation

Aerodynamic interaction

between ground vortex and propeller

investigated by experiments and

CFD

Clean Sky Technology

Evaluator – Air Transport System

assessments

Maierl, Reinhold (Airbus Defence and

Space)

Merino Martinez, Roberto (Polytechnic University of Madrid

UPM)

Fioriti, Marco (Politecnico di Torino) Yang, Yannian ()

Junior, Alf (German Aerospace Center

DLR)

Petersson, Ö, Daoud, F (Airbus Defence

and Space) -

Pavan, G. (Alenia Aermacchi), Corpino,

S., Fusaro, R. (Politecnico di Torino)

Eitelberg, G., Veldhuis, L. (Delft

Univwersity of Technology)

-

164 165 168 146 248


16

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Aeroelastic Concepts in Civil Aircraft Wings

Design

Knowledge-based Integrated Aircraft

Windshield Optimization for

Conceptual Design

Expanding customer services perimeter: from

strategy to technology and the other way around. The case of Health

and Usage Monitoring

Systems (HUMS) in the management of missiles stockpiles

Development of Flow Structures in

the Near-Field Wake Region of the Common Research

Model

People, Planet, Profit: the Making of the Clean Sky 2

PPP

Mazidi, Abbas (Yazd

university)

Munjulury, Raghu Chaitanya (Linköping

University)

Nicolay, Alexis (MBDA France)

Zimmermann, Dina-Marie (University of

Stuttgart)

van Manen, Ron (Clean Sky JU)

Fazelzadeh, S.A., Ranjbar, A. (Shiraz

university)

Gårdhagen, R., Berry, P, Krus, P (Linköping

University)

Pavan, G. (Alenia Aermacchi), Chiesa,

S., Fusaro, R. (Politecnico di Torino)

Waldmann, A., Lutz, T., Krämer, E. (University of

Stuttgart)

-

217 196 175 182 -

Aerial Delivery dynamic model validation by

Flight Test

Landing Gear Conceptual Design

and Structural Optimization of a

Large Blended Wing Body Aircraft

Potential benefits of Prognostics and

Health Management in

conceptual aircraft design

The influence of the drag dynamic stall

in the vawt starting efficiency

-


17

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Oliver, Mercedes (Airbus Defence and

Space)

Cumnuantip, Sunpeth (German Aerospace

Center DLR)

Hölzel, Nico (German Aerospace Center

DLR)

Malael, Ion (Romanian Research and

Development Institute for Gas Turbines

COMOTI)

-

Pérez, A.P., Rodríguez, A.J.

(ALTRAN), Climent, H.C. (Airbus Defence

and Space)

-

Torhorst, S. (Collège des Ingénieurs),

Meyer, H., Gollnick, V. (DLR - German

Aerospace Center)

Dragan, V., Gherman, B. (Romanian Research &

Development Institute for Gas Turbines

COMOTI)

-

Wednesday 9 September 2015

08:00 - 09:00 Keynote 'Challenges to the European Aerospace Research and Infrastructure' Eric Dautriat, Executive Director CleanSky, Rolf Henke, Member DLR Executive Board & Michel Peters, CEO NLR

09:00 - 10:30 EU ESWIRP

project - Wind Tunnel Upgrades

Aircraft Systems 2 Structural Design 1


3

International collaboration

EU-project INcreasing young

women's participation in

Science Studies and in the Aeronautic

Industry (IN2SAI) - panel session

10 27 15 221 40

ESWIRP: European Strategic Wind

tunnels Improved Research Potential

– Program Overview

Thermal Properties of C919X EHAs

Operating During Whole Flight

Envelope

Development of laser beam welding

concepts for fuselage panels

Additive layer manufacturing of

monolithic catalyst bed

Overall view of the European

Collaboration in Aeronautics

Research within GARTEUR


18

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Boyet, Guy (ONERA) Fu, Yongling (Beihang University)

Kashaev, Nikolai (Helmholtz-Zentrum

Geesthacht)

Essa (University of Birmingham)

Consigny, Hervé (ONERA)

- Han, X., Qi, X.Y.

(Beihang University), Wang, L.J. (COMAC)

Riekehr, S., Falck, R., Enz, J. (Helmholtz-

Zentrum Geesthacht), Robson, J., Tian, Y. (The University of

Manchester, School of Materials), Karanika,

A. (Hellenic Aerospace Industry S.A.,

Research and Product Design)

- Vasseur, O., Delot, A.L. (ONERA)

53 57 48 223 114

Mach number control

improvement in ONERA s1ma large sonic wind tunnel

Preliminary Design Rules for

Electromechanical Actuation Systems –

the Effects of Saturation and Compliances

Robust Aircraft Rotation Planning using Stochastic

Optimization

Additive manufacturing of space propulsion

hardware

Future of Aviation

Crozier, Pascal

(ONERA) Fu, Jian (Institut

Clément Ader, INSA)

Kölker, Katrin (German Aerospace

Center DLR)

Smith (European Space Agency)

Szodruch, Joachim (IFAR)


19

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Chargy, C., Pichon,

R. (ONERA)

Hazyuk, I., Maré, J.C. (Institut Clément Ader,

INSA)

Wenzel, S.W. (DLR), Zeile, C.Z. (Georg-August-University

Göttingen), Westphal, S.W. (Technical

University Clausthal), Marco, M.B.

(Technical University Clausthal), Lütjens,

K.L. (DLR)

-

Shin, Jai (NASA), Nakahashi, K.N.

(Japan Aerospace Exploration Agency)

118 192 83 242 247

DNW innovations in wind tunnel testing - New moving belt

system for Large Low speed Facility

-

The implications of aerospace

requirements on the design-space of a

permanent magnet starter/generator

FEM analyses of joined wing aircraft

configuration ? Future Sky

Hermans, Christophe (German-Dutch Wind

Tunnels DNW)

Brink, Emile (Aeronamic)

Mieloszyk, Jacek (Warsaw University of

Technology)

? (European Space Agency) Eijssen, Paul (EREA)

-

Gerber, M. (Aeronamic), Geest, M. (Technische

Universiteit Delft), Zeilstra, D.

(Aeronamic), Boer, A. (NLR)

MSc Kalinowski, M. (Warsaw University of

Technology) - -


20

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

11:00 - 12:30

EU ESWIRP project - NASA

Common Research Model

Multi-Disciplinary Design Structural Design 2 Re-entry

assessment Space Technologies

2 IN2SAI panel

session

103 43 3 99 234

Validation of Fluid-Structure Coupled Wing Deformation Simulations for the

NASA Common Research Model

Cooling channel flow characterization

using Particle Image Velocimetry and Laser Induced Fluorescence

Ground Test Vibrations as non-conservative mean of compliance for

vibration airworthiness

requirements of A/C mechanical systems design

Development of a Break Up Re-Entry

Sensor

European Space Technology

Harmonisation

Keye, Stefan (German Aerospace

Center DLR)

Rochlitz, Henrik (TU Braunschweig)

Palomares, Angel (Airbus Defence and

Space)

Greger, Ralf (RUAG Space)

Williams, Edmund (European Space

Agency)

Rudnik, R. (DLR) Scholz,P.S. (TU Braunschweig) -

Murray, N.P. (ESA), Benkeser, C.,

Coppoolse, W. (RUAG Space), Prof.

Roesgen, T. (ETH), Weihs, H., Dittert, C.

(DLR)

-

158 95 107 173 235


21

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Using wing modal deformation for improvement of CFD results of

ESWIRP project

Multidisciplinary design optimization

of flight control system parameters in consideration of

aeroelasticity

Modeling method of strength analysis

for thin-walled structure

RADID – Vehicle Design

Optimization for Demise and

Destructive Re-entry Assessment

Identifying trends in space technology

- an industry perspective & The added values of

SME's in Europe's Space R&D

programmes

Vrchota, Petr (Aeronautical

Research and Test Institute)

Nussbächer, Daniel (Airbus Defence and

Space)

Wang, Zhijin (Nanjing University of

Aeronautics and Astronautics)

Weikert, Sven (Astos Solutions GmbH)

Lionnet, Pierre (Eurospace),

Bracquene, Hans (SME4Space)

Prachar, A.P. (Aeronautical

Research and Test Institute)

Hanel, M., Daoud, F. (Airbus Defence and Space), Hornung, M.

(Technical University of Munich)

Kang, Longhui, Kretov, A.S., Huang,

Sheng

Fritsche, B. (HTG - Hyperschall Technologie

Goettingen GmbH), Eggert, J., Kossev, I.

(Astos Solutions GmbH), Huertas, I.

(ESA / ESTEC)

-

161 115 198 243 236

Analysis of the NASA Common Research Model

European Transonic Wind

Tunnel Test Data and NASA Test

Data

Integrated multidisciplinary

engineering solutions at Fokker

Aerostructures

Citric acid aerospace stainless steel passivation: a

green approach

A potential framework for the

safe and permanent

passivation of a LEO battery bus power system

France Space R&D programme & Uncover rough

diamonds: Switzerland's

National Space initiatives


22

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Rivers, Melissa (NASA Langley Research

Center)

Berg, Tobie (Fokker Aerostructures)

Bragaglia, Mario (University of Rome

Tor Vergata"") Alcindor (SSTL)

Blanco, Dampier (CNES - French Space

Agency), Richard, Johann (Swiss Space

Office)

Quest, J.Q. (European Transonic Windtunnel), Rudnik,

RR (German Aerospace Center

DLR)

Laan, A.H., Hootsmans, L.M. (Fokker

Aerostructures)

Rinaldi,M. (University of Rome Tor

Vergata""), Cacciotti, I. (University of Rome

Niccolò Cusano""), Mori, S., Nanni, F., Montesperelli, G.

(University of Rome Tor Vergata"")

- -

13:30 - 14:30 Keynote 'Challenges to the European Aerospace Education'

Hester Bijl, Dean TU-Delft Aerospace Faculty, Frithjof Weber, Head of Knowledge and Competence Management Airbus & Franco Bernelli, Politecnico di Milano, Aerospace Science and Technology

14:30 - 16:00 Greenhouse Gas Emissions 1

Maintenance Repair and Overhaul

Future Education and Training Needs

De-orbiting Technologies Space Design 1 4th IN2SAI partner

meeting

76 33 25 162 6

Aviation – Environmental

Threats Simplified methodology of

NOx and CO emissions estimation

Accelerating MRO procedures for

composite materials using innovative

detection techniques

21st Century Skills for the Aerospace

Industry Workforce and Their

Translation to the Classroom

Analysis of Electric Propulsion for De-Orbiting of Sun-

Synchronous Satellites

A New SDRE method to Design a Control Law for a

Rigid-flexible Satellite


23

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Glowacki, Pawel

(Institute of Aviation)

Schoemaker, Christiaan (Hogeschool van

Amsterdam)

Lappas, Ilias (South Wales University)

Fromm, Christian (German Aerospace

Center DLR)

Gadelha de Souza, Luiz (Brasilia University)

Czyz, S., Kawalec, M.

Pelt, M.M.J.M., Boer, R.J., Borst, M.S. (Hogeschool van

Amsterdam), Groves, R.M. (Delft University of

Technology)

Kourousis, K.I.K. (University of

Limerick) Herbertz, A. (DLR) -

80 - 128 226 56

Comparison of the Potential

Environmental Impact

Improvements of Future Aircraft Concepts Using

Life Cycle Assessment

-

Giving Space to Space: Bachelor

Education in Space Engineering at

Delft University of Technology

Architectural Design and Testing

of a De-orbiting Subsystem

Time-Efficient and Accurate

Performance Prediction and

Analysis Method for Planetary Flight Vehicles Design

Johanning, (Hamburg University of Applied Sciences)

- Cervone, Angelo


Tiedemann (HPS) Jarzabek, Artur A.

(Technical University of Madrid UPM)

Scholz, D. (Hamburg University of Applied

Sciences) -

Zandbergen, B.T.C., Noomen, R., Gill, E.K.A., Mooij, E., Kamp, A. (Delft


-

Moreno Lopez, A.I., González Hernández, M.A., Perales Perales,

J.M. (Technical University of Madrid

UPM)


24

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

183 197 172 227 131

Rotorcraft Noise and Emissions

Reduction Process for CleanSky – The

Measurement of Success

Damage identification in

composite panels using acousto-

ultrasonic waves

A Multidisciplinary and Practical view

in Aeronautical Engineering Education

Development and Testing of

Deployable Membrane for De-Orbiting Systems

Space Capsule Using Energy of

Gravitational Field for Flight Control

D'Ippolito, Roberto (Noesis Solutions)

Loendersloot, Richard (University of Twente)

De Paula, Adson (Technological

Institute of Aeronautics ITA)

Hahn (HTS)

Sandu, Constantin (Romanian Research


Turbines COMOTI)

Smith, C.S. (Agusta Westland), Pachidis,

VP (Cranfield University), Stevens,

J.S. (National Aerospace Laboratory NLR), Thevenot, L.T. (Airbus Helicopters)

-

Germano, J.S.E., Morales, M.A., Carvalho, F.C., Passador, F.E (Technological

Institute of Aeronautics ITA)

- Brasoveanu, D. (Raytheon)

16:30 - 18:00 Greenhouse Gas Emissions 2

Manufacturing Technology

Aircraft Design Methodology 3

Space Debris Mitigation

technologies at system level

Personal Air Transport

IN2SAI final conference session

189 111 8 207 16


25

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Environmental prospects in

aviation: a study from the Air &

Space Academy FC

Simulation Driven Design and Additive

Manufacturing. A new design process to unleash potential

of Additive Manufacturing

freedom

An automated CFD analysis workflow in overall aircraft

design applications

Contributing to Orbital

Sustainability with an Independent

Decommissioning Device for Satellite

and Launcher Space

Implementing Space Debris

Mitigation Measures

Next Generation Fixed-Wing

Personal Aerial Vehicle

Joselzon, Alain (Air

and Space Academy)

Cervantes Herrera, Alejandro (Altair

Engineering)

GU, Xiangyu (German Aerospace Center

DLR)

Antonetti, Stefano (D-ORBIT)

Panayotov, Hristian (Technical University - Sofia, Plovdiv Branch)

- -

Ciampa, P.D., Nagel, B. (German


Ferrario, L.F., Rossettini, LR (D-

ORBIT SRL)

Zafirov, D.I. (Technical University - Sofia, Plovdiv Branch)

190 167 46 238 130

CO2 Emissions From Flights Within And Between

Industrialised States

Design and optimisation

methodologies for Additive Layer

Manufacturing (ALM) considering

uncertainties

Conceptual Design Method for the Wing Weight

Estimation of Strut Braced Wing

Aircraft

Airbus Defence and Space Global

Approach to Space Debris Mitigation

European Personal Aero-

Transportation. Using of the

Double-Flutter Flight Principle for Manufacturing of Personal Flying-

Cars by European Aircraft and Car


26

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Manufacturers

Rigaudias, Jean-Baptiste (Air and Space Academy,

retired Air France VP Environment)

Azevedo, José (CEIIA) Chiozzotto, Gabriel (German Aerospace

Center DLR)

Duhamel (Airbus Defence and Space)



Turbines COMOTI)

-

Alves, N.A. (Instituto Politécnico de Leiria

IPL), Santos, RS (Instituto Superior

Técnico IST), Mortágua, JPM (CEIIA)

- -

Brasoveanu, D. (Orbital ATK), Voicu,

R., Deaconu, M., Cican, G., Zavodnic, F.

(COMOTI)

- 195 215 239 203

-

Micro Laser Sintering capabilities opens the door for long endurance flights supported by light weight and precise

micro parts

Morphed vertical tailplane

assessment for certification

requirements

CleanSat

Thinking out of the Box: unwrapping the ‘Flying Car’. How to combine

personal transport in the air and on

the road


27

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

- Winderlich, Matthias (3D MicroPrint)

Castillo-Acero, Miguel Angel (Aernnova)

Soares (European Space Agency) Jorna, Peter (PAL-V)

-

Goebner, J.G.. Blau, M.B.L., Weber, D.W.E., Starke, T.S.T., Schneck,

M.S.C., Lehnhardt, A.L.E. (3D MicroPrint

GmbH)

Cuerno-Rejado, C., Gómez-Tierno, M.A.

(Escuela Técnica Superior de Ingenieros

Aeronáuticos, UPM)

- Dingemanse, R.D. (PAL-V)

Thursday 10 September 2015

08:00 - 09:00 Keynote 'Challenges to the European Air Power in Asymetric Conflicts' CDRE Peter Round, Director Capability EDA & Lt-Gen Sander Schnitger, Commander Royal Netherlands Air Force

09:00 - 10:30 Composite Structures 1

Active Flow- Loads & Noise control on

next generation wing (AFLoNext)

workshop

The Future of Air Combat Systems in

Europe

Active Debris Removal system

studies Green Propulsion 1

European Workshop on Aircraft Design

Education (EWADE)

119 124 68 193

Flight-physical aspects and methods of future

military aircraft designs

Envisat removal by robotic and net capture means. Results of the

Airbus DS led e.Deorbit Phase A ESA study

Experimental investigations based on a demonstrator unit to analyze the

combustion process of a nitrous oxide/ethene

premixed green bipropellant

The Importance Of Non-Linearities In Aircraft Preliminary

Design

Hitzel, Stephan Maria (Airbus Defence and

Space)

Estable, Stéphane (Airbus Defence and

Space)

Werling, Lukas (German Aerospace

Center DLR)

Nicolosi, Fabrizio (University of Naples

Federico II"")


28

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

-

Bischof, B.B., Oswald, M.O., Soppa, U.S.,

Axthelm, R.A., Mistritta, M.S., Voigt, P.V. (Airbus

Defence & Space)

Perakis, N., Hochheimer, B.I.J.,

Gernoth, A., Schlechtriem, S.

(German Aerospace Center DLR)

De marco, A., Della Vecchia, P (University

of Naples Federico II"")

36 - 148 139

Crash Concept for Composite

Transport Aircraft Using Tensile and

Compressive Absorption

Mechanisms

- ANDROID Small

Active Debris Removal Mission

Pulcher-pulsed chemical rocket with green high

performance propellants: second

year project overview

?

Schatrow, Paul (German Aerospace

Center DLR) - Escorial Olmos, Diego (GMV Aerospace and

Defence SAU) Pasini, Angelo (Alta)

Waimer, M. (German Aerospace Center

DLR) -

Peters, T.V.P. (GMV Aerospace and Defence

SAU), Naudet, J. (QinetiQ Space), Chitu, C.C. (GMV Romania),

Sewerin, J.K., Barcinski, T. (Centrum Badari

Kosmicznych Polskiej Akademii Nauk)

Torre, L., Pace, G., Pasini, A. (Alta S.p.A.)

55 - 153 -


29

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Composite laminates

simulation using an enhanced peridynamics

lamina formulation

-

ESA’s e.deorbit mission and its

roadmap to Active Debris Removal

- ?

Zaccariotto, Mirco

(University of Padua) - Biesbroek, Robin (European Space

Agency) -

Dipasquale, D.D., Sarego, S.G.,

Galvanetto, G.U. (University of

Padova)

- - -

11:00 - 12:30 Composite Structures 2

AFLoNext workshop

Propeller Interactional Aerodynamics

Technologies for Active Debris

Removal 1 Space design 2 EWADE

77 5 31 7

Multiscale Virtual Testing – The

roadmap to the efficient design of

composites for Damage Tolerance

Wind tunnel high speed powered

tests of the ERICA tilt rotor model in S1MA - NICETRIP

Project

Autonomous robotic system for active debris removal:

requirements, state-of-the-art and

concept architecture of the rendezvous and capture (RVC)

control architecture/system

Thermally Induced Vibration Analysis of Flexible Solar

Wing

?


30

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Lopes, Claudio (IMDEA Materials

Institute) Lebrun, Frederic

(ONERA)

Jankovic, Marko (German Research Center for Artifial Intelligence (DFKI

GmbH) / University of Bremen)

Kong, Xianghong (Nanjing University of

Aeronautics and Astronautics)

Falcó, O., Naya, F. (IMDEA Materials Institute), Tijs, B.

(Fokker Aerostructures B.V.), González, C., Llorca, J. (IMDEA Materials

Institute)

-

Kumar, K., (Dinamica Srl) Romero Martin, J., Vasile, M. (Strathclyde

University), Ortiz Gómez, N., Walker, S.J.I. (Southampton

University), Kirchner, F. (DFKI), Topputo, F.

(Politecnico di Milano)

Yang, J. (RMIT University), Wang, Z.

J. (NUAA)

78 152 135 20

GARTEUR Structures &

Materials Action Group 32 – An

European Research Project On

Damage Growth In Aerospace Composite Structures

APIAN-INF: a Low-speed Aerodynamic and Aeroacoustic Investigation of Pylon – Pusher

Propeller Interaction Effects

COBRA contactless de-tumbling

Interactive 3D Visualization to

Support Concurrent Engineering in the

Early Space Mission Design Phase

?

Riccio, Aniello (Second University of

Naples)

Sinnige, Tomas (Delft University of Technology)

Peters, Thomas (GMV Aerospace and Defence

SAU)

Deshmukh, Meenakshi (German Aerospace

Center DLR)


31

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

-

Lynch,K.P., Malgoezar, A.M.N., Scheper, K.Y.W.,

Ragni, D., Snellen, M., Eitelberg, G. (Delft


Escorial Olmos, D., Pellacani, A. (GMV)

Wolff, R., Schaus, V. (German Aerospace

Center (DLR))

82 156 155 144

CompoWorld: an innovative

approach to innovation and

economic development

CFD Analysis of a blowing pylon system for the

APIAN propeller in pusher

configuration

How many satellites need de-orbit

technologies? Future scenarios for passive

de-orbit devices

Model Based Design for

Automated System Architecture Generation

?

Veldman, Bouke (Stichting

CompoWorld)

Sitges de la Sotilla, Oscar (German


Palla, Chiara (Cranfield University)

Staack, Ingo (Linköping University)

-

Márquez Gutiérrez, C.M. (Rolls-Royce

Deutschland)

Jennifer Kingston (Cranfield University)

Krus, P. (Linköping University)

13:30 - 15:00 Aeroacoustics AFLoNext workshop

Propulsion Integration 1

Technologies for Active Debris

Removal 2 Green Propulsion 2 EWADE

19 51 132 101


32

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Fly-over noise sources

localization and engine settings analysis using a low cost, high

resolution acoustic camera

Mathematical Modeling Of Aircraft Gas

Turbine Engine In On-Board Control

System

Special Equipment Which Uses

Concentrated Solar Light for Earth

Protection Against Asteroids-Advanced

Design and Technology

Green Micro-Resistojet Research at Delft University of Technology: the New Frontiers of

Cubesat Propulsion

?

Merino Martinez, Roberto (Delft University of Technology)

Blyumin, Kirill (Samara State

Aerospace University)



Turbines COMOTI)

Cervone, Angelo (Delft University of

Technology)

Snellen, M.S., Merino-Martinez, R., Simons, D.G. (Delft University of Technology TUD)

Gimadiev,G. (Samara state aerospace

university (national research university)), Nizhegorodtsev, V.

(Samara state aerospace university (national research

university))

Brasoveanu, D. (Orbital ATK), Anghel, O., Voicu,

R., Zavodnic, R. (COMOTI)

Wang, C. (Beihang University), Cordeiro

Guerrieri, D., Zandbergen, B.T.C., van Zeijl, H.W. (Delft


88 90 143 -


33

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

On thermo-acoustic acoustic-vortical-entropy waves and flow

stability

Increasing Air-Fuel Ratio of

Consumption of Distributed

Turboelectric Propulsion for

Blended Wing Body Aircraft using Recuperator

Clamping Mechanism – Designing a

Tentacles Based Capture Mechanism

for Active Debris Removal

- ?

Campos, Luis (Instituto Superior

Técnico)

Seenivasan, Dinesh Babu (Technical

University of Madrid)

Meyer, Jan-Christian (OHB System) -

Marta, A.C.M. (Instituto Superior

Técnico) -

Scheper, M.S. (OHB System AG), Vazquez,

J.V. (SENER Ingeneria y Sistemas), Le Letty,

R.L.L. (ESA)

-

122 149 240 232

A new computational

framework for UAV quadrotor noise

prediction

The constructal principle and

character law, hyperbolic, of

natural design, a new paradigm of

aerospace systems

Simulating and testing throw-nets

for space debris removal

ESA green propulsion progress ?

Vieira, Ana (CEIIA)

Stanciu, Virgil (University Politehnica

of Bucharest)

Wormnes (European Space Agency)

Valencia-Bel (European Space

Agency)


34

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

-

Pavel,C. (University Politehnica of Bucharest)

- -

15:30 - 17:00 Community Noise AFLoNext workshop

Propulsion Integration 2 Space Design 3 Green Propulsion 3 EWADE

38 180 94 136

Clean Sky Technology

Evaluator – Noise assessment and

experience at airport level

Computation of Thermodynamic Cycle for Novel

Detonation Aircraft Engine

Combined Launch System: a new

concept to reduce the launch costs for

Micro (Cube) Satellites and Debris

hunting probes

Propulsive performance of a c3h4/h2o2 rocket

prototype for future green bipropellant

thrusters

?

Eenige, Michel (National Aerospace

Laboratory NLR)

Cuciumita, Cleopatra (Romanian Research


Turbines COMOTI)

Ahmed, Hamed (Cairo University) Pasini, Angelo (Alta)

-

Porumbel,I. (COMOTI Romanian Research and Development Institute for Gas

Turbines)

- Pace, G., Torre, L. (Alta S.p.A.)

39 216 157 212


35

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Auralization of novel aircraft configurations

A Mathematical Analysis of a

Hydrogen Motor Glider Drive

All moving tail plate interaction on an

aerodynamic characteristic of the

rocket plane in tailless configuration

Design of Valve Segment for a Hybrid Rocket

Engine

?

Arntzen, Michael (National Aerospace

Laboratory NLR)

Papucki, Jacek (Warsaw University of

Technology)

Kwiek, Agnieszka (Warsaw University of

Technology)

Rana, Usman (European Space

Agency)

Bertsch, L. (DLR), Simons, D.G. (Delft

Technical University) - Figat, M.F., Senenko,

K.S. (Warsaw University of Technology)

Hink, R.(ERIG)

202 - 218 219

Noise predictions of a hypersonic air transport vehicle

concept during the landing and take-

off cycle

-

Analysis of the flow in a propulsion

nozzle subjected to a fluid injection

Green Solid Propellants for

Launchers ?

Wijntjes, Rik (National Aerospace

Laboratory NLR) - Chellou, Nassir (Hassiba Benbouali University of

Chlef)

Wingborg, Niklas (Swedish Defence Research Agency,

FOI)

Tuinstra, M (NLR), Taguchi, H (Japan

Aerospace Exploration Agency)

- Benarous, A, Guendez, M. (Hassiba Benbouali

University of Chlef) -


36

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

17:00 - 18:00 Closing event

To be placed Structural Design Handling Qualities

211 209

Aircraft Preliminary Design: the Windowless

Concept

Investigation of Low Fidelity codes

on the determination of

Stability Derivatives and

Characteristics of unconventional

BoxWing Aircraft

Bagassi, Sara (University of

Bologna)

Clark Reis, José Roberto (Embraer)

Lucchi, F., Persiani, F. (University of

Bologna)

Bustamante Coura, J.C. (Embraer S.A.)

Aerodynamics Multidisciplinary Design

Prognostics and Health

Management

Multidisciplinary Design Flow Control

73 105 168 194 249


37

Main


van Hasselt room

Commission room 3

Commission room 2

Commission room 4

Computational Investigation on the Influence of Rotation on the Aerodynamics of

an Isolated Wheel

Multi-criterial aerodynamic

synthesis method of mission-oriented

aircraft design

Expanding customer services perimeter: from

strategy to technology and the other way around. The case of Health

and Usage Monitoring

Systems (HUMS) in the management of missiles stockpiles

An advanced aircraft design framework

for aircraft preliminary design and optimization

Active Flow Control Applied at the Engine-Wing

Junction

Kothalawala, Tharaka

(Brunel University)

Kachel, Stanislav (Warsaw Military


Nicolay, Alexis (MBDA)

De Marco, Agostino (University of Naples

Federico II"")

Fricke, Sebastian (previously German Aerospace Center

DLR)

Kozkiewicz, A.K., Olejnik, A.O. (Warsaw Military University of

Technology)

Chiquier, J.-M. (MBDA)

Nicolosi, F, Attanasio, L (University of Naples

Federico II")

Vlad Ciobaca, Anna Kröhnert, Jochen Wild (DLR), Olivier Blesbois (Airbus Operations)

ceas symposium program

Documents