cement sector of bd report
DESCRIPTION
Cement SectorTRANSCRIPT
ZEBUN NAHAR INVESTMENT ANALYST
Research Report: Cement Sector of Bangladesh Date: April 05, 2011
Page 2 of 23
ABSTRACT
Bangladesh cement industry is the 40th largest market in the world. Currently capacity of the industry is about 20 mn tonnes (MT). Top 13 players are alone controlling over 78% of the total industry capacity. However, the balance capacity still remains quite fragmented. Per capita consumption remains poor when compared with the world average; only 65 kg (FY2009) while our neighboring countries, India and Pakistan, have per capita consumption of 135kg and 130kg respectively. This underlines tremendous scope for growth in the Bangladesh cement industry in the long term. Cement, being a bulk commodity, is a freight intensive industry and transporting it over long distances can prove to be uneconomical. For that reason, industry is regional in nature. It‟s also seasonal in nature, during Monsoon industry suffers from low demand. Four major costs are associated with the production of cement as provided:
Cost elements % of cost of sales
Power and fuel costs 10%
Raw material costs 75%
Transportation costs 5%
Other expenses 10%
The pricing of cement of various players in the industry are very close to one another. The factories which would be using captive power (which is cheaper and more reliable than grid power) and backed by uninterrupted clinker supply at competitive price, are likely to be more cost efficient to emerge as the market leader. Currently, the standard price of one bag of cement produced by the multinational cement companies ranges within BDT 370 to BDT 390 per bag. On the other hand, price of one bag of cement produced by the local companies‟ ranges within the price bracket of BDT 340 to BDT 365. The common technology which is widely used in our industry from the year 2003 is Portland Composite Cement (PCC) which is made following European Standard Methods (ESM). Earlier, Ordinary Portland Cement (OPC) had been used which was made following the American Standard Method (ASM). PCC gives equal strength and durability like OPC. The basic difference between them is in the manufacturing technology. Only 65%-80% of clinker is required to produce PCC while 95% of clinker is required to produce OPC. So, worldwide PCC has become popular which requires less clinker. Currently, Heidelberg, Holcim and Lafarge are the leaders among multinational cement manufacturers and Shah and Meghna are the leading domestic manufacturers. Shah cement is the market leader with close to 14.20% of the market share, followed by Heidelberg with about 9.30% of the market share. During the 2010, many small local manufacturers like Premier, Seven Circle, Crown, Fresh and King cement increased their sales drastically riding on their benefits of economies of scale, backward linkage and aggressive marketing effort. In Bangladesh, cement consumers are categorized as follows:
1. Individual home makers (25%) 2. Real estate developers (35%) 3. Govt. organizations, i.e., LGED, RHW etc. (40%)
Page 3 of 23
20
30
4548 50 52
55 59 6163 65
84.5
0
10
20
30
40
50
60
70
80
90
1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Cement Consumption (kg) Per Capita
Source: IDLC Research
Cement consumption has steadiliy been rising. It is expected that cement companies will enjoy a good growth of margin over the next 3 years. Becasuse, in next couple of years when large capacities are expected to come on-stream, pass through of input cost will be easier and clinker (main raw material of cement) price is expected to remain stable at $53-$58. Currently, multinational cement companies are facing intensive competition with local companies. Local manufacturers have been pursuing more innovative and agressive business strategy compared to multinationals. Local manufacturers seek to seize large market by reaching mass people through economies of scale while multinationals cater the needs of specific group of customers by charging high price through superior brand value and quality. In addition, another basic trend in cement industry is smaller companies are shutting down and the bigger companies are becoming bigger. Leading cement manufacturers are now going for expansion. It is expected that if the ongoing expansion plans complete within FY2011, the total production capacity of the industry will rise by 61%. Cement industry expects the consumption to rise by 25% (it will be much higher if Government projects come on stream). Though it seems that the industry will run overcapacity but as mentioned earlier, industry is dependent on only 13 companies‟ production. So it reveals that the cement industry will fall short of supply if the demand increases in line with the big infrastructural projects of Government as expected in future and this symbolizes the huge growth potential of our cement industry. Industry Demand & Production YYeeaarr CCoonnssuummppttiioonn
((mmnn MMTT)) GGrroowwtthh rraattee %% CCaappaacciittyy ((mmnn
MMTT)) GGrroowwtthh rraattee
%%
22000055 77..6600 1188..5500%% 1111..1177 55..2200%%
22000066 88..4400 1100..5533%% 1111..9911 66..6633%%
22000077 88..2200 --22..3388%% 1122..2200 22..4488%%
22000088 88..5544 44..1100%% 1144..4444 1188..3388%%
22000099 1100..5577 2233..8822%% 1177..3355 2200..1144%%
22001100 1133..9933 3311..8800%% 1199..9955 1144..9966%%
Considering the „Life cycle of the industry‟, currently cement industry of Bangladesh is in the growth stage. Sales of cement are increasing due to growing demand for cement in both the local and foreign markets. The industry realized about 30% and 21% growth in 2009 and 2010 respectively
Page 4 of 23
after suppressed demand from previous years. Industry expected demand growth is 20%-25% for the next three years based on the assumptions below. 1. Government would be able to materialize its important ADP.
2. According to the UN Population Fund (UNFPA) report 2010, 28% people of our country live in
urban areas where the population growth is 3.2 per thousand. Urbanization and demand for accommodation are increasing day by day. Thus it is expected that the real sector will grow steadily with the household users‟ increasing cement consumption pattern.
3. Private sector may get interested to invest in real estate for getting tax advantages of their
undisclosed funds
4. Good number of large infrastructure construction projects (Padma Bridge, Flyovers, highways) are on the pipeline.
5. There is no “Substitute” for Cement. Steel can be used in construction but in limited extent due to
its high cost.
On the flip side, some caution has to be maintained due to the current demand- supply gap leading to over capacity and falling margins and prices. Also, given the close linkages between them, the effect of a slowdown in real estate growth or hike in interest rates globally or price increase of imported raw materials should also be considered.
Page 5 of 23
ACRONYMS AND ABBREVIATIONS
ASM = American Standard Method BCMA= Bangladesh Cement Manufacturing Association CNF = Cost & Freight ESM = European Standard Methods OPC = Ordinary Portland Cement PCC = Portland Composite Cement UNFPA = UN Population Fund
Page 6 of 23
1.0 PREAMBLE
Gradual substitution of traditional building structures or patterns by modern high-rise ones has pushed up the use of cement. A faster growth in demand for cement has been observed only since mid-1980s, especially with implementation of large infrastructure projects, increased pace of urbanization, construction of apartment buildings and multistoried shopping complexes in urban areas and a shift in the taste of rural people for modern houses.
2.0 STATE OF THE INDUSTRY
2.1 Cement Industry Overview
Development of cement industry in Bangladesh dates back to the early-fifties but its growth in real sense started only about a decade.The country has been experiencing an upsurge in cement consumption for the last five years. Government gave permission for establishing cement industries in Bangladesh in FY1995. Initially the cement industry took place without the proper analysis of the demand and supply of cement in the country. Within the span of the two to three years, industry attained expanded capacity of the product with stable growth rate of consumption. There were mainly four dominant players in the cement industry in the year 1998 that produced their own cement to meet the demand of their customers. These companies were:
Meghna Cement (owned by Bashundhara group)
Eastern Cement (currently known as Seven Horse)
Chatok Cement
Chittagong Cement (taken over by Heidelberg where the local brand is called Ruby)
After a decade, currently 123 companies are listed as cement manufacturers in the country. Among them 63 have actual production capacity while 32 are in operation. The current installed capacity of the industry is 20.0 mn MT. This installed capacity has been calculated under two conditions below:
1. all factories are in operation 2. production is at its peak season
Though the installed capacity is 20.0 mn MT, currently the acutal capacity is about 13.96 mn MT due to supply constraints for power and clinkers.
Source: BCMA & IDLC research
Market size derivation
Total demand (mn MT) 13.93
Standard Price per beg (BDT) 350
Total Market size (BDT mn) 97,510
Total Market size (USD bn) 1.35
Page 7 of 23
Industry structure
Multinationals ,
27%
Local
Manufacturers,
73%
7.60
11.178.40
11.91
8.20
12.20
8.54
14.44
10.57
17.35
13.93
19.95
-
5.00
10.00
15.00
20.00
2005 2006 2007 2008 2009 2010
Industry Demand & Production scenario
Consumption (mn MT) Capacity (mn MT)
Overview of Cement Industry
Total Production capacity (mn MT) 20
Industry average utilization rate 70%
Actual capacity excluding obstacles (mn MT) 13.96
Local consumption (mn MT) 13.93
Per capita consumption (FY2010) 84.5 Kg
Total factories registered 123
Factories started operation 63
Currently plants in operation 32
Factories exporting cement to India 8
Size of export in FY2010 (K MT/year) 260
Construction % of GDP 10%
Construction sector growth in FY2010 (according to BBS) 8%
Industry consumption growth in FY2010 32%
Expected industry growth rate in next 5 years 25% / year
Largest 13 cement companies hold (market share) 78%
Source: BCMA & IDLC research
Page 8 of 23
Area wise consumption:FY2010
15.50%
12.00%7.50%
63.50%
1.50%
Dhaka Mongla Chittagong Sylhet Rajshahi
3.0 INDUSTRY CHARACTERISTICS
3.1 Seasonality and Cyclicality of the Industry
Bangladesh cement industry is known for its seasonality which can be as high as 50%. Cement demand declines during the monsoons due to a slowdown in construction activities. On the other hand, though the yearly capacity of the industry is saturated with overcapacity, market demand gets matched or cross the effective capacity during the first 5 to 6 months of the year.
In addition, the cement industry, like most capital-intensive commodity industries, is cyclical in nature with respect to supply. Given the high gestation period of 24-30 months, there is a time lag between capacity build-up and cement demand. Cement demand is closely linked to the growth of the construction sector. Hence, when the construction sector is strong, demand increases. As a result, the profitability rises, leading to capacity additions by existing players and the entry of new players. However, since it takes 2 -2.5 years to build a cement plant, it is likely that before completion, demand could decrease or stagnate, or the capacity additions could exceed demand. This can lead to a fall in cement prices, and the industry could face a downturn, leading to reducing operating rates or shutting down capacities.
3.2 Cement Industry – Regional in Nature
Cement is a high-volume, low-value commodity. Transporting over long distances adds to the cost, resulting in lower margins to the players. This makes cement a regional commodity where lower distribution cost makes it remunerative to producers. Cement consumption varies region wise because the demand-supply balance, per capita income and level of industrial development differ in each region. In our country Dhaka, Chittagong and Mongla account for 91% of total consumption.
Seasonality of cement industry
Peak Season January to April/ May and October to December
Dull/off Season (depends on monsoon)
June to September
Page 9 of 23
4.0 COST AND PRICING STRUCTURE
4.1 Cost Elements
There are a number of cost elements which are taken into consideration for price fixations of cement bags. Four major costs are associated with the production of cement as provided:
1. Power and fuel costs 2. Raw material costs 3. Transportation costs 4. Other expenses
Cost elements % of cost of sales
Power and fuel costs 10%
Raw material costs 75%
Transportation costs 5%
Other expenses 10% Source: IDLC Research
Key points
Supply At present, the demand-supply situation is tightly balanced with the latter being marginally higher. As the cement industry is dependent on few companies‟s production, more expansion will be needed to meet the large demand of govt infrastructures.
Demand Housing sector acts as the principal growth driver for cement. However, recently industrial and infrastructure sectors have also emerged as demand drivers.
Barriers to entry High capital costs and long gestation periods. Access to cheap source of clinker supplier also acts as a significant entry barrier.
Bargaining power of suppliers
Our cement industry depends on imported raw materials. Currently international price of clinker is stable. But any kind of volatility in its price remained a concern.
Bargaining power of customers
End users of the product get benefited if they are near to the distribution plant of the company. But when their positioning is at distance from the distribution plant, companies used to charge premium. Moreover, brands used to charge premium on account of better quality perception also.
Competition Intense competition among players regarding price due to homogeneous product.
Page 10 of 23
1. Power and fuel costs Cement industry is power-intensive with power and fuel costs constituting approximately 7%-10% of the cost of sale of cement, and hence has a major impact on the operating expenditure of the manufacturers. 30 KW to 35 KW electricity is needed for producing per MT cement. Though a large portion of the power requirement is met through national grid, increasingly large companies are opting for captive power plants to reduce costs and to have continuous power supply. Currently, 17-18 cement manufacturers got captive power plants.
2. Raw material costs The second major component in the production of cement is raw material costs. Main raw material of production is clinker which accounts 70-75% of the COGS. Bangladesh does not have its own supply of limestone and cannot produce clinkers domestically. Except Lafarge, all other cement manufacturers of Bangladesh import clinkers. But currently, even Lafarge is also dependent on imported clinker due to the unavilability of Limestone. About 10-15 million tonnes of clinker is imported annually from Thailand, Indonesia, Malaysia,China,Philippines and also in small quantity from India by railway. The price of clinker increased to $73 a tonne in 2009 from $55-63 a tonne in 2008. But at the end of 2009, the price began to decline, lowest price was $42 per tonne. At present, standard price of clinker in international market is $52 to $58 per tonne. As clinker makes about 60%-70% by monetary value of the total raw material of cement, the reduction in the price will certainly help the cement producers to get cost advantage.
Cost derivation of Clinker (on an average)
CNF (cost & freight) cost in CTG $ 53.00
Vat on landing at CTG BDT 350 or $5 /ton
Total cost of Clinker (landing at CTG) $ 58.00
Vat on landing at Dhaka BDT 840 or $12 /ton
Total cost of Clinker (landing at Dhaka) $ 65.00 Source: IDLC Research
Apart from clinker, other raw materials used by the cement industry are fly ash, ironslag and gypsum.
3. Transportation cost The weight/ price ratio of cement effects transportation cost significantly. Location of a cement plant and the cost to transport the cement to its distribution terminals, determines the plant‟s competitive position and price it may charge.
Raw material
Key raw material Clinker
Additives Gypsum and Fly ash
Major Exporters of Clinker Thailand, Indonesia, Malaysia, China,
Philippines and India
Source: IDLC research
Page 11 of 23
Although in a minimal percentage but rising loading restriction imposed on vehicles crossing over the Jamuna Bridge and priority movement of vehicles carrying food grain are also causing setbacks for the industry by increasing transportation cost.
4. Other expenses Other expenses include employee costs, administration expenses, others. These account for 5-10% of the cost of sales.
4.2 Pricing Structure
The pricing of cement of various players in the industry are very close to one another. Due to the presence of homogeneous products in the market, price war is a sensitive issue in this industry which exists from time to time in the cement market. Cement prices have been on an upward trajectory since 2007 in line with steady increase in clinker costs. However, the large capacity expansions are expected to weigh down on price realizations by cement companies due to increasing availability of product. Moreover, cement prices, like all commodity prices, are influenced by demand-supply dynamics. Seasonal factors like weak demand during monsoon in most areas also put pressure on prices. As the freight cost accounts for a substantial proportion of sales price, the ruling market price of cement becomes different in different regions. Currently, the standard price of one bag of cement produced by the multinational cement companies ranges within BDT 370 to BDT 390 per bag. On the other hand, price of one bag of cement produced by the local companies‟ ranges within the price bracket of BDT 340 to BDT 365.
Additional capacity utilization of the existing units as well as commissioning of new producing units is likely to bring down the sales price, unless there is an equivalent rise in demand. But if the demand does not rise proportionately to absorb the additional supply, the units would have to lower price to induce more sale to maintain the required level of revenue income. The quality of cement, brand image, export potential, price of cement in international market, anti- dumping position of cement manufacturer, future tariff policy etc. will have an impact on price of cement in future.
The factories which would be using captive power, which is cheaper and more reliable than grid power and backed by uninterrupted clinker supply at competitive price are likely to be more cost efficient to emerge as the market leader.
Hence, average price of cement is expected to increase by BDT 5.0 - BDT 10.0 per bag over the next 3 years. Price may not increase in line with increasing demand as the cost of sales may dip due to stable clinker price and increasing supply of product.
Page 12 of 23
5.0 PRODUCT AND TECHNOLOGY
5.1 Ordinary Portland Cement (OPC) and Portland Composite Cement (PCC)
Till 2002, only one type of cement was available in Bangladesh was Ordinary Portland Cement (OPC) which is made following the American Standard Method (ASM). From the year 2003, various types of cements became available in Bangladesh which helped the cement industry to provide differentiated and improved products to the customers. The cement which is widely used from the year 2003 is the Portland Composite Cement (PCC) which is made following European Standard Methods (ESM). Holcim (Black Cement) was the first company to launch this type of cement in the market. Currently ratio of production of PPC and OCC is 95:5. PCC gives equal strength and durability like OPC. The basic difference between them is in the manufacturing technology. Only 65%-80% of clinker is required to produce PCC while 95% of clinker is required to produce OPC. So, worldwide PCC has become popular which requires less clinker.
5.2 Technology
The manufacture of cement is a two-phase process. Firstly, Clinker is produced. Most common methodology of producing clinker is to mix up calcareous minerals such as chalk, limestone containing silica and alumina and heat upto 1450 degree C. After cooling it, clinker is formed.
Secondly, the clinker is ground with calcium sulphates and with industrial processes wastes such as blast furnace slag, limestone and fly ash to produce Portland cement. Two basic types of clinker production processes exist, depending on the way the raw materials are prepared before entering the kiln system:
Wet method (use in Bangladesh)
Dry method In the wet method, water is added to form wet thick slurry and dry process is based on drying the bulk materials to form a dry powdered meal. The choice of process depends on moisture content of the available raw material. When wet raw materials (moisture content over 20%) are available, the wet process can be preferred. However, in Europe, today‟s new cement plants are all based on the dry
Portland Composite Cement (PCC)
Ingredients used in PCC Ratio
Clinker 65-80%
Slag
21-35% Fly Ash
Limestone
Gypsum 0-5%
Ordinary Portland Cement (OPC)
Ingredients used in OPC Ratio
Clinker 95-100%
Gypsum 0-5%
Source: www.cemweek.com
Page 13 of 23
process as the wet process requires approximately 56% to 66% more energy. For dry processes, current state-of-the-art technologies are kiln systems with multistage cyclone preheaters and precalciners. Each step in manufacture of portland cement is checked by frequent chemical and physical tests in plant laboratories. The finished product is also analyzed and tested to ensure that it complies with all specifications.
Standardization-Bangladesh is maintaining Standardization BSTI (Bangladesh Standardization Authority) has been adopted the European
Norms and titled as BDS EN 197-1:2003
Main constituents a) Clinker b) Slag c) Fly ash d) limestone e) Gypsum
Bangladesh has adopted EN197- 1:2000 as Bangladesh Standard, titled BDS EN 197-1:2003. Under this Standard there are 27 products in the family of common cements, which are grouped into five main cement types as follows:
CEM I Portland cement
CEM II Portland- composite cement
CEM III Blast furnace cement
CEM IV Pozzolanic cement
CEM V Composite cement
Source: www.cembureau.be
While clinker is the main component in all types of cements, the kind and the amount of the other constituents determine the type of cement. For example, Portland cement consists of 95% clinker, whereas Portland composite cement contains of only 65% clinker. All cement types also contain up to 5% of calcium sulphates. In our country recently, the availability of PCC is 95% against 5% of OPC.
Page 14 of 23
6.0 PRODUCERS AND CONSUMERS OF THE INDUSTRY
6.1 Major Producers of the Industry
The largest 13 cement manufacturers hold 78% of the market share. Heidelberg, Holcim and Lafarge are the leaders among multinational cement manufacturers and Shah and Meghna are the leading domestic manufacturers. Shah cement is the market leader with close to 14.20% of the market share, closely followed by Heidelberg with about 9.30% of the market share. During the 2010, many small local manufacturers like Premier, Seven Circle, Crown, Fresh and King cement increased their sales drastically riding on their benefits of economies of scale, backward linkage and aggressive marketing effort.
Market share of major cement companies Market share Shah cement 14.2% Heidelberg Cement 9.3% Meghna Cement (MCML-King) 7.4% Seven Circle BD Ltd. 6.9% Lafarge Surma Cement Ltd. 6.7% Holcim BD Ltd. 6.4% Unique Cement (Fresh) 6.1% MI Cement (Crown) 4.9% Premier Cement 4.0% Akij Cement 3.7% Royal Cement 3.0% Mongla Cement (SKS)-Elephant 2.9% MTC Cement (Tiger) 2.8%
Total market share of largest 13 companies 78.29% Source: BCMA
Market share of Multinational cement companies
Market share
Heidelberg 9.31%
Lafarge Surma 6.67%
Holcim 6.45%
Cemex 2.78%
Emirates 1.64%
Total Market Share 27%
Source: BCMA
Page 15 of 23
Source: IDLC Research
Revenue & market share of companies:FY2010 (appx.)
SL. No.
Market/ Area
Name Of Cement Company
Yearly Total Consumption
(MT)
Average consumption/year
(MT)
Market Share
1
Sylhet Area Lafarge Surma Cement Ltd. 917,685.74 76,473.81 6.7%
2 Chattak Cement 112,538.30 9,378.19 0.8%
Total 1,030,224.04 85,852.00 7.5%
1
Dhaka Area
Scan Cement 785,538.00 65,461.50 5.7%
2 Shah cement 1,948,189.00 162,349.08 14.2%
3 MI Cement (Crown) 673,055.80 56,087.98 4.9%
4 Premier Cement 547,020.00 45,585.00 4.0%
5 Holcim BD Ltd. 887,636.00 73,969.67 6.4%
6 Seven Circle BD Ltd. 953,254.62 79,437.89 6.9%
7 Unique Cement (Fresh) 844,563.44 70,380.29 6.1%
8 Cemex Cement 382,125.00 31,843.75 2.8%
9 Anwar Cement 192,900.00 16,075.00 1.4%
10 MTC Cement (Tiger) 385,310.95 32,109.25 2.8%
11 Eastern Cement (Shat Ghora) 138,335.00 11,527.92 1.0%
12 Mir Cement 141,350.00 11,779.17 1.0%
13 Akij Cement 502,583.65 41,881.97 3.7%
14 Metro Cement 136,435.00 11,369.58 1.0%
15 Emirates Cement 225,887.00 18,823.92 1.6%
Total 8,744,183.46 728,681.96 63.5%
1
Chittagong Area
Scan Cement (Ruby) 496,109.00 41,342.42 3.6%
2 Aramit Cement 103,630.00 8,635.83 0.8%
3 Dimond Cement 209,800.00 17,483.33 1.5%
4 Mostafa Hakim 53,950.00 4,495.83 0.4%
5 Royal Cement 417,790.00 34,815.83 3.0%
6 NGS Cement 87,530.00 7,294.17 0.6%
7 S. Alam 54,160.00 4,513.33 0.4%
8 Confidence 230,290.00 19,190.83 1.7%
Total 1,653,259.00 137,771.58 12.0%
1
Mongla Area
Meghna Cement (MCML-King) 1,021,917.30 85,159.78 7.4%
2 Mongla Cement (SKS)-Elephant
397,280.00 33,106.67 2.9%
3 Dubai Bangla Cement (5 Ring) 246,730.00 20,560.83 1.8%
4 Nowapara Cement 158,738.60 13,228.22 1.2%
5 Olympic Cement (Anchor) 311,540.00 25,961.67 2.3%
Total 2,136,205.90 178,017.16 15.5%
1 Rajshahi Area
Aman Cement 203,625.00 16,968.75 1.5%
Total 203,625.00 16,968.75 1.5%
Total 13,767,497.40 1,376,749.74 100%
Page 16 of 23
Current and Upcoming Capacity of Running Cement Industries in Bangladesh
Sl. Running industry
Present capacity
(mn MT/year)
Probable capacity
expansion (mn MT/year)
Total capacity after expansion
(mn MT/year)
Probable completion
year 1 Shah Cement 2.25 1.86 4.11 Jan-11
2 Meghna Cement Mills Ltd. 1.44 4.80 6.24 Jun-11
3 Akij Cement Ltd. 1.26 -
4 Heidelberg (Scan) 1.20 -
5 Lafage Cement 1.20 -
6 Premier Cement 1.20 0.60 1.80 Sep-10
7 Seven Circle cement Ltd. 1.02 1.54 2.56 Jun-11
8 Heidelberg (Rubi) 0.90 0.75 1.65 End of 2011
9 Holcim Cement (BD) ltd. (Dhaka)
0.90 1.98 2.88 Not finalized
10 Holcim Cement (BD) ltd. (Mongla)
0.18
11 M.I Cement Factory (300 days) 0.84 1.65 2.49 End 2011
12 Unique Cement 0.80 -
13 Ryal Cement 0.72 -
14 Mongla Cement Factory 0.72 -
15 Emirates 0.60 -
16 Diamond Cement Factory 0.60 -
17 M.T.C Cement Ltd. 0.36 1.26 1.62 End 2011
18 Aramit Cement Ltd. 0.51 0.81 1.32 Not finalized
19 Confidence Cement Ltd. 0.50 0.60 1.10 2011
20 S.Alam Cement Mills Ltd. 0.40 -
21 Cemex (BD) Ltd. 0.35 -
22 Olympic Cement 0.25 -
23 Anwar cement Ltd. 0.21 -
24 N.G.Saha Cement Mills Ltd. 0.18 -
25 Chatak Cement Ltd. 0.18 -
26 Aman Cement Factory Ltd. 0.18 -
27 Mir Cement 0.18 -
28 Metropoliatan Cement Ltd. 0.18 0.47 0.65 Dec-11
29 Eastern Cement Ltd. 0.18 -
30 Dubai (BD) Cement Mills Ltd. 0.18 -
31 Alhaj Mustafa Hakim Cement 0.18 -
32 Noapara Cement Mills Ltd. 0.10 -
Total 20 16 36
Source: IDLC Research
Industry Outlook in FY2012 in mn MT
2,010 2012 Growth rate
Total installed capacity (mn MT) 19.95 32.06 61%
Actual capacity (mn MT) 13.96 22.44 61%
Total Demand (mn MT) 13.93 17.41 25%
Supply-Demand Ratio 100% 129%
Source: IDLC Research
Page 17 of 23
20
30
4548 50 52
55 59 6163 65
84.5
0
10
20
30
40
50
60
70
80
90
1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
Cement Consumption (kg) Per Capita
6.2 Major Consumers of the Industry
In Bangladesh, the main cement consumers are:
1. Individual home makers 2. Real estate developers 3. Govt. organizations, i.e., LGED, RHW etc.
Real estate developers and Govt. projects are the dominant users of cement. During 2007-2008 public sector construction works were slowed down under caretaker government. Unwillingness to disclose the source of income contributed to the downward trend in real estate sector, i.e., building of apartments, flats etc. during that time period.
Cement Consumption and GDP Growth rate
Year MT (in mn) GR % GDP Growth rate
2005 7.60 - 5.96%
2006 8.40 11% 6.63%
2007 8.20 -2% 6.43%
2008 8.54 4% 6.19%
2009 10.57 24% 5.74%
2010 13.93 32% 5.80%
Cement consumption Growth in last 5 years 83%
Source: IDLC Research
Major User Group of Cement
Individuals 25%
Real estate developers 35%
Government projects 40%
Source: IDLC Research
Source: IDLC Research
Page 18 of 23
7.0 VALUE CHAIN
Supply chain of the industry primarily comprises raw material suppliers, cement manufacturers, distributors and end-users. The primary distributors in the supply chain are wholesalers (large traders with a margin of BDT 5-7 per bag) and retailers (small traders with a margin of BDT 10-20 per bag). Wholesalers-cum-retailers operate in rural areas.
8.0 EXPORT OF CEMENT: SIZE OF EXPORT IS 260 K MT/YEAR
Cement industry started export from FY2007. Currently, companies exporting cement to north-eastern states of India are as below:
Shah Cement
Holcim Bangladesh Limited
Seven Circle
Unique Cement
MI Cement
Confidence Cement
Premier Cement
Aramit All these companies are exporting in very low quantity to the neighboring countries (India and Myanmar) which are easily accessible through water transportation such as ships and mother vessels. Transportation cost is major concern to export cement. Thus exporting this product to countries which are reachable through connecting water bodies is much more feasible in terms of cost and accessibility. High duty charge is one of the main stumbling-block of cement export. Cement manufacturers in our country produce cement by importing clinker from China and Indonesia (mainly) at a high rate of shipping cost and duties which make the present cost structure impracticable to tap the export potentials for cement. If the government make the duty structure more industry-friendly by exempting some duties on exportable cement and granting cash incentives, cement exporting to Sri Lanka,Nepal,Bhutan and the Middle Eastern (ME) countries will be feasible in future.
9.0 DUTY STRUCTURE OF THE INDUSTRY
Favourable Government policy in the form of tariff protection and low price of clinker in the international market have lead to mushroom growth of clinker crushing units in the country. Government has imposed a supplementary duty of 7% on import of clinker and 25% on import of cement which is in favour of local manufacturers for the further growth of the industry.
Current duty structure of raw materials
Clinker BDT 350/ton
Slag 12% on invoice value
Fly ash 25% on invoice value
Gypsium 12% on invoice value
Limestone 12% on invoice value Source: BCMA
Page 19 of 23
10.0 STEADY GROWTH MARGINS
In next couple of years when large capacities are expected to come on-stream, pass through of input cost will be easier. Moreover, clinker (main raw material of cement) price is expected to remain stable at $53-$58. Therefore, its been expected that cement companies will enjoy a good growth of margin over the next 3 years.
11.0 CURRENT SCENARIO OF THE INDUSTRY
11.1 Dominance by Local Companies
Currently, multinational cement companies are facing intensive competition with local companies. Lafarge, Cemex, Holcim and Heidelberg are among the top ten cement companies in the world, but together they make up only around 27% of the Bangladesh market. Scancement of Heidelberg Group is the biggest among the foreign companies, but its market share is around 9.3% despite it has been in Bangladesh for nearly a decade. Holcim's market share is around 6.4% despite it bought three plants in quick succession more than half a decade back as it planned to emerge as the top player in the country. Lafarge and Cemex, the world's first and the second largest cement companies, have been struggling to survive in the industry. Local companies are grabbing the top slot of the industry by operating in economy of scale and with deft marketing strategy. For example, Shah cement , a subsidiary of the country's biggest conglomerate Abul Khaer Group is now in the top of the industry beating Heidelberg and Holcim by deploying a fleet of trucks in the main growth areas and building the best marketing network in the country. Local companies are investing in backward linkages (captive power plants), have built big plants to reduce cost of production and have a fleet of trucks to carry the products right to the doorsteps of consumers. Quality-wise also, the local companies have made rapid strides. Multinationals bear high overhead costs regarding salary, infrastructure, quality control etc. On the other hand, local companies are more focused to keep the overhead costs low. Multinationals are only concentrating in providing high quality products. But local comapanies are concetrating in offering quality product with additional benefits like home delivery system, rebate, gifts etc. Local manufacturers have been pursuing more innovative and agressive business strategy compared to multinationals. Local manufacturers seek to seize large market by reaching mass people through economies of scale while multinationals cater the needs of specific group of customers by charging high price through superior brand value and quality.
11.2 Industry Survivors: Large Companies
During last five years almost 32 cement companies have been shut down due to inadequcy of raw materials. Its too difficult to the small manufacturers to survive in the industry due to the shortage of raw materials since small companies face difficulties to arange the raw materials in competitive price. Currently, the basic trend in cement industry is smaller companies are shutting down and the bigger companies are becoming bigger. Only 10-15 companies are holding 80% of market share.
Page 20 of 23
12.0 FUTURE OUTLOOK OF CEMENT INDUSTRY OF BANGLADESH
Considering the „Life cycle of the industry‟, currently cement industry of Bangladesh is in the growth stage. Sales of cement are increasing due to an enormous demand for cement in both the local and foreign markets. The industry realized about 30% and 21% growth in 2009 and 2010 respectively after suppressed demand from previous years.
Industry expected demand growth is 20%-25% for the next three years based on the assumptions below.
1. Government would be able to materialize its important ADP of building big infrastructure projects.
2. According to the UN Population Fund (UNFPA) report 2010, 28% people of our country live in
urban areas where the population growth is 3.2 per thousand. Urbanization and demand for accommodation is increasing day by day. Thus it is expected that the real sector will grow steadily with the household users‟ increasing cement consumption pattern.
Population Growth rate of Bangladesh
Year Total Number of population
(mn) Population Growth Rate
2000 140.77 1.8% 2001 143.29 1.8% 2002 145.80 1.8% 2003 148.28 1.7% 2004 150.73 1.6% 2005 153.12 1.6% 2006 155.46 1.5% 2007 157.75 1.5% 2008 160.00 1.4% 2009 162.22 1.4% 2010 (est.) 164.40 1.3% 2050 (forecasted)
176.53 7.4%
Page 21 of 23
Cement Statistics by U.S.Geological Survey
0
500
1000
1500
2000
2500
3000
3500
1970 1973 1976 1979 1982 1985 1988 1991 1994 1997 2000 2003 2006 2009
world production( m)
3. Private sector may get interested to invest in real estate for getting tax advantages of their undeclared funds
4. Good number of large infrastructure construction projects (Padma Bridge, Flyovers,
highways) are on the pipeline.
5. There is no “Substitute” for Cement. Steel can be used in construction but in limited extent due to its high cost.
On the flip side, some caution has to be maintained due to the current demand- supply gap leading to over capacity and falling margins and prices. Also, given the close linkages between them, the effect of a slowdown in real estate growth or hike in interest rates globally or price increase of imported raw materials should also be considered.
13.0 CEMENT INDUSTRY: GLOBAL SCENARIO
13.1 Major Players
World production of cement is 2.6 billion tons/year (FY2010). The world production of cement is dominated by China (1,400 mn MT), followed by India (260 mn MT), United States, Japan and Russia. Other countries featuring prominently on the global cement space include Spain, South Korea, Italy, Iran, Turkey, and Brazil. Significant capacity expansions in China, India, Saudi Arabia, UAE, Turkey, Egypt, and Brazil are underway and planned for the next few years. China and India, together account for more than 50% of the total cement produced and consumed in the world. Developed markets including the US, Western Europe and Japan are mature and currently facing declining demand due to the global economic crisis.
The largest global players are Lafarge (France), Holcim (Switzerland) and Cemex (USA). In terms of cement production, Bangladesh ranks about 40th in the world. According to Global Industry Analysts, Inc., global demand for cement is forecasted to rise 4.1% per year and reach to 3.5 billion metric tons in 2013. Gains will be fueled by rising investments in
Page 22 of 23
infrastructure among the developing countries of the world, driven by economic growth and increasing per capita income levels.
13.2 Strong Future Growth of Developing Asian countries
A number of developing countries in the Asia/Pacific region is attaining strong gains in cement consumption. China, which accounts for nearly half of world cement demand, is facing a slowing rate of growth as construction spending is decelerating. Other fast-growing markets for cement in the region like Philippines, Thailand and Vietnam, all are enjoying stable growth rates of exceeding 6% per year. In the developing nations of Latin America, Eastern Europe and the Africa/Mideast region, however, advances in cement demand has slowed down considerably from the robust gains seen during the 2003-2008 period. Increases in cement demand in the developed areas of the US, Western Europe and Japan is lagging the average global pace of growth.
Basically, by nature, global demand of cement is rotating according to the growth of the construction sector in each region. High demand for cement had been observed in Europe and America during FY1960-70. After FY1970, cement demand shifted to India, Malaysia, Hongkong, Singapore and Korea. High Demand for cement continued in these areas till FY1990. From FY2000, developing countries of Asian regions like Bangladesh, Pakistan, Nepal and Burma are now enjoying high growth rate of cement consumption. This trend is expected to continue till FY2035.
Top Five Global Producers (mn MT/year)
China 1,400
India 260
Japan 84
USA 68
Russia 53
per capita consumption (kg) : FY2009
Korea 1,200
China 1,000
India 135
Pakistan 130
Bangladesh 65
Asian group 400
Middle east 600
World average 270
Global Cement Consumption
mn MT CAGR %
FY 2007 2,568 9.9
FY 2008 2,763 7.6
FY 2009 2,857 3.4
Page 23 of 23
14.0 CONCLUDING REMARK
The cement industry is likely to maintain its current growth momentum and continue growing at
around 20% to 25% in the medium to long term. Government initiatives in the infrastructure sector and the housing sector are likely to be the main growth drivers.
Our cement consumption per year was only 65kg in FY2009 whereas, in India its 135 kg and in
Pakistan its 130kg. So there is a lot of opportunity to grow in this industry.
If the import duty structure of various cement products, e.g. finished cement, semi-finished cement and basic raw materials for cement (25%, 12% and 7% respectively) continues i.e. import duties is on favor of the local manufacturers and the construction sector remains booming with smooth power supply than nothing to be surprised that cement industry will be the most evolving industry in the next three to five years.
The importance of the housing sector in cement demand can be gauged from the fact that it consumes
almost 60%-65% of the country's cement. If housing sector growth wanes, it would impact the growth in consumption of cement, leading to demand supply mismatch.
Industry Opportunities & Threats Opportunities Threats Strong economy Construction sector dwindling Construction sector growth Energy price and supply Govt. support on local manufacturing rather than importing
International pricing of raw materials
Growing urbanization Growing usage of steel materials for construction
Disclaimer: This Document has been prepared and issued by IDLC on the basis of the public information available in the market, internally developed data and other sources believed to be reliable. Whilst all reasonable care has been taken to ensure that the facts & information stated in the Document are accurate as on the date mentioned herein. Neither IDLC nor any of its director, shareholder, member of the management or employee represents or warrants expressly or impliedly that the information or data of the sources used in the Document are genuine, accurate, complete, authentic and correct. Moreover none of the director, shareholder, member of the management or employee in any way be responsible about the genuineness, accuracy, completeness, authenticity and correctness of the contents of the sources that are publicly available to prepare the Document. It does not solicit any action based on the materials contained herein and should not be construed as an offer or solicitation to buy sell or subscribe to any security. If any person takes any action relying on this Document, shall be responsible solely by himself/herself/themselves for the consequences thereof and any claim or demand for such consequences shall be rejected by IDLC or by any court of law.