centrifugal fans - gtl-3

36
Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 1 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 1 CENTRIFUGAL FANS - GTL-3 CENTRIFUGAL FANS - GTL-3 Products Ventilation Air Conditioning Refrigeration Heating PROVIDED BY HEINEN & HOPMAN Inside 22 º C OUTSIDE 35°C 45°C HUMIDITY 90% 40%

Upload: others

Post on 07-May-2022

13 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 1Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©1

CENTRIFUGAL FANS - GTL-3CENTRIFUGAL FANS - GTL-3Products

Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

Page 2: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 1Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©1

COMPANY INTRODUCTION

Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to assure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way.

In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY

Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to assure that we can always be.

Americas

Europe

Asia3

Countries9

Of�ces4

Factories300Employees

11Countries

23Of�ces

4Factories

1200Employees

7Countries

11Of�ces

7Factories

380Employees

Page 3: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 2Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©2

APPLICATION The GTL belt-driven, single-inlet centrifugal fans cover air flows up to 27 m3/s and pressure rises up to 3300 Pa. The fans are available with different types of impellers:• Impellers with forward-curved blades (GTLF fans)• Impellers with backward-curved blades (GTLB fans)

The backward-curved blades in the GTLB fans have the same aerodynamic characteristics as those in the GTHB fans, but the GTHB blades are a reinforced version for higher speeds.

Versions Besides the normal version, the fans are also available in a spark-proof version. The smoke extraction version of GT has been tested by the French CTICM institute and by the Russian VNIIPO institute. CTICM has tested the fans for +4000C, 2 hours and the tests cover GTLB-3-025–140 and GTLF-3- 031–071. VNIIPO has tested the fans for +4000C, 2 hours and for +600 °C, 1 hour and the tests cover all single-inlet GT-fans. The fans in the smoke extraction version have metallic bearing dampers. The fans in the spark-proof version conform to the German standard VDMA 24 169 3.1 – 3.2 and 3.4. The inlet cone is made of brass. In the GTLF fans, the inlet is fitted with a brass band. If the inlet of the fan is connected to the ducting, the single-inlet fans are rated for continuous operation at temperatures up to +80 °C. If the motor is exposed to the air stream (i.e. on a free-inlet fan), the ambient temperature must not exceed +40 °C. Motors for higher temperatures are available on request.

Design The casing is made of Sendzimir-galvanized sheet steel. The casing is jointed by the “Pittsburg folding method”, which produces tight, strong joints.On the size 025–071 GTLF fans, the inlet is directly deep-pressed into the end walls. On the GTLB and GTHB fans, the inlet must be deeper and extend into the impeller with a certain amount of overlap and a small, accurately pre-determined radial gap. The GTLB and GTHB fans have a double inlet that gives the casing additional rigidity. On the size 080–140 fans, the inlet cone is made separately for both fan types and directly fitted to the end walls.The fan impellers with backward-curved blades (GTLB / GTHB) are made of sheet steel and welded, coated with 60-mm-thick epoxy powder. The fan impellers with forward-curved blades (GTLF) are made of Sendzimir-galvanized sheet steel. The impellers of the size 040–140 GTLB and GTHB fans are dynamically balanced to accuracy to ISO 1940–1973 G 2.5 at the maximum speed. The impeller of the size 025–031 GTLB fans and all sizes of GTLF fans are dynamically balanced to accuracy according to ISO Standard 1940–1973 G 6.3 at the maximum speed.

2Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 4: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 3Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©3

GENERAL SURVEY CHART GTLF-3-

GENERAL SURVEY CHART GTLB/ GTHB -3-

All indicated values for 50Hz~. (60 Hz on request)

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©3

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 5: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 4Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©4

MotorGT fans are normally supplied with the motor mounted, enabling the fan to be trial-run prior to dispatch. ABB can assume undivided warranty liability. If the fan is supplied without motor, the size and speed of the motor must be specified when the order is placed so that the correct belt drive can be selected. Detailed motor data are tabulated in separate tables. Refer to the motor data.

Belt drive The belt drive consists of belt pulleys and belt(s). The pulleys have a separate Taper-Lock-type hub, which is easy to fit and remove. The belt guard and slide rails are included in the GT fan delivery.

Motor selectionThe shaft power (P, kW) and the recommended minimum permissible motor output for direct on-line starting (PM, kW) are specified in the fan charts (safety factor already included). Select the motor based on the PM value. The safety factor covers belt losses that arise with standardized belt pulleys.

RecommendationsWhen selecting GTLB and GTHB fans (with backward-curved blades) that at a given speed have an output peak within their operating range, use this output peak for selecting a motor (not the output at the duty point). When selecting GTLF fans (with forward-curved blades) whose power demand, at a given speed, continuously increases as the air flow increases, use the shaft power demand P at the duty point (adding the safety factor!) or the recommended minimum permissible motor output PM. If you cannot plot the duty point in the fan chart with certainty, select a motor for an output that is another 15-20% higher.

4Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 6: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 5Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©5

GTLFSingle-inlet centrifugal fan for a belt drive. The casing is made of Sendzimir-galvanized sheet steel, jointed by the “Pittsburg folding method”. Fan impeller with forward-curved blades, made of Sendzimir-galvanized sheet steel. The fan impeller is dynamically balanced to accuracy according to ISO standard 1940 – 1973 G 6.3. The shaft is designed for a critical speed, which is at least 20% higher than the maximum fan speed. The single-row, deep-groove ball bearings are permanently lubricated and sealed on both sides. The bearings are secured to the shaft by means of an eccentric locking collar. The bearings are supported by 3-arm or 4-arm bearing supports.• Normal version• Smoke extraction version – can withstand 4000C for 2 hours• Spark-proof versionFan details for GTLF in accordance with DIN 24166, Class 2

GTLB Single-inlet centrifugal fan for a belt drive. The casing is made of Sendzimir-galvanized sheet steel, jointed by the “Pit-tsburg folding method”, in size 100 consisting of five sections with flanges. Fan impeller with backward-curved blades, made of sheet steel, welded and coated with 60-mm-thick epoxy powder. The fan impeller is dynamically balanced to accuracy according to ISO standard 1940 – 1973 G 2.5 (sizes 040–140) or G 6.3 (sizes 025–031). The shaft is designed for a critical speed, which is at least 20% higher than the maximum fan speed. The single-row, deep-groove ball bearings are permanently lubricated and sealed on both sides. The bearings are secured to the shaft by means of an eccentric locking collar. The bearings are supported by 3-arm or 4-arm bearing supports. The size 080–100 fans have plummer blocks with ball bearings. The size 112–140 fans have plummer blocks with roller bearings fitted to a sturdy bearing bracket made of welded flat iron bar. The specified aerodynamic performance has been measured in accordance with AMCA 210-85 and 300-85. • Normal version• Smoke extraction version – can withstand 4000C for 2 hours• Spark-proof versionFan details for GTLB in accordance with DIN 24166Sizes 040–140: Class 1 Sizes 025–031: Class 2

GTHBSingle-inlet centrifugal fan for a belt drive. The casing is made of Sendzimir-galvanized sheet steel, jointed by the “Pittsburg folding method”, in size 100 consisting of five sections with flanges. Fan impeller with backward-curved blades, made of sheet steel, welded, coated with 60-mm-thick epoxy powder and baked. The fan impeller is dynamically balanced to accuracy according to ISO standard 1940 – 1973 G 2.5. The shaft is designed for a critical speed, which is at least 20% higher than the maximum fan speed. The size 040–071 GTHB fans have single-row, deep-groove ball bearings that are permanently lubricated and sealed on both sides. The bearings are secured to the shaft by means of a tapered adapter sleeve. The bearings are supported by a robust 3-arm or 4-arm bearing support. The size 080–100 GTHB fans have plummer blocks with roller bearings secured to a sturdy bearing bracket made of welded flat iron bar. The roller bearings are equipped with grease nipples. The specified aerodynamic performance has been measured in accordance with AMCA 210-85 and 300-85.• Normal version• Spark-proof versionFan details for the GTHB in accordance with DIN 24166, Class 1

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 7: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 6Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©6

DIMENSIONS AND WEIGHTS - GTLF-3-025

Dimensions in mm

Weight (kg) GTLF-3-025: 17,5 Motor data: Belt drive: 3.0 See separate motor list

Page 8: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 7Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©7

DIMENSIONS AND WEIGHTS - GTLB-3-025

Dimensions in mm

Weight (kg) GTLB-3-025: 18,5 Motor data: Belt drive: 3.0 See separate motor list

7 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 9: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 8Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©8

DIMENSIONS AND WEIGHTS - GTLF-3-031

Dimensions in mm

Weight (kg) GTLF-3-031: 23,5 Motor data: Belt drive: 4.0 See separate motor list

8Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 10: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 9Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©9

DIMENSIONS AND WEIGHTS - GTLB-3-031

Dimensions in mm

Weight (kg) GTLB-3-031: 25,0 Motor data: Belt drive: 4.0 See separate motor list

9 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 11: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 10Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©10

DIMENSIONS AND WEIGHTS - GTLF-3-040

Dimensions in mm

Weight (kg) GTLF-3-040: 39,0 Motor data: Belt drive: 4.0 See separate motor list

10Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 12: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 11Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©11

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-040

Dimensions in mm

Weight (kg) GTLB/HB-3-040: 41,0 Motor data: Belt drive: 4.0 See separate motor list

11 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 13: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 12Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©12

DIMENSIONS AND WEIGHTS - GTLF-3-045

Dimensions in mm

Weight (kg) GTLF-3-045: 45,0 Motor data: Belt drive: 5.0 See separate motor list

12Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 14: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 13Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©13

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-045

Dimensions in mm

Weight (kg) GTLB/HB-3-045: 49,5 Motor data: Belt drive: 5.0 See separate motor list

13 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 15: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 14Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©14

DIMENSIONS AND WEIGHTS - GTLF-3-050

Dimensions in mm

Weight (kg) GTLF-3-050: 56,0 Motor data: Belt drive: 5.0 See separate motor list

14Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 16: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 15Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©15

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-050

Dimensions in mm

Weight (kg) GTLB/HB-3-050: 61,0 Motor data: Belt drive: 5.0 See separate motor list

15 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 17: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 16Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©16

DIMENSIONS AND WEIGHTS - GTLF-3-056

Dimensions in mm

Weight (kg) GTLF-3-056: 84,0 Motor data: Belt drive: 6.0 See separate motor list

16Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 18: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 17Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©17

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-056

Dimensions in mm

Weight (kg) GTLB/HB-3-056: 91,0 Motor data: Belt drive: 8.0 See separate motor list

17 Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Page 19: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 18Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©18

DIMENSIONS AND WEIGHTS - GTLF-3-063

Dimensions in mm

Weight (kg) GTLF-3-063: 107,0 Motor data: Belt drive: 6.0 See separate motor list

18Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 20: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 19Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©19

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-063

Dimensions in mm

Weight (kg) GTLB/HB-3-063: 115,0 Motor data: Belt drive: 6.0 See separate motor list

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©19

Page 21: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 20Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©20

DIMENSIONS AND WEIGHTS - GTLF-3-071

Dimensions in mm

Weight (kg) GTLF-3-071: 134,0 Motor data: Belt drive: 6.0 See separate motor list

20Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 22: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 21Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©21

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-071

Dimensions in mm

Weight (kg) GTLB/HB-3-071: 144,0 Motor data: Belt drive: 6.0 See separate motor list

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©21

Page 23: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 22Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©22

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-080

Dimensions in mm

Weight (kg) GTLF-3-080: 267,0 Motor data: Belt drive: 12.0 See separate motor list

22Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 24: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 23Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©23

DIMENSIONS AND WEIGHTS - GTLB/GTHB-3-090

Dimensions in mm

Weight (kg) GTLB/HB-3-090: 320,0 Motor data: Belt drive: 21.0 See separate motor list

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©23

Page 25: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 24Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©24

DIMENSIONS AND WEIGHTS - GTLB-3-100

Dimensions in mm

Weight (kg) GTLB-3-100: 367,0 Motor data: Belt drive: 34.0 See separate motor list

24Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 26: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 25Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©25

DIMENSIONS AND WEIGHTS - GTLB-3-112

Dimensions in mm

Weight (kg) GTLB-3-112: 353,0 Motor data: Belt drive: 40.0 See separate motor list

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©25

Page 27: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 26Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©26

DIMENSIONS AND WEIGHTS - GTLB-3-125

Dimensions in mm

Weight (kg) GTLB-3-125: 421,0 Motor data: Belt drive: 34.0 See separate motor listBelt frame: 190.0

26Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 28: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 27Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©27

DIMENSIONS AND WEIGHTS - GTLB-3-140

Dimensions in mm

Weight (kg) GTLB-3-112: 555,0 Motor data: Belt drive: 50.0 See separate motor listBelt frame: 240.0

Page 29: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 28Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©28

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ 2 POLES = 3000R/MIN

0320 28 61 81 [email protected]

1) Correction factorsThe current values in the tables are applicable to motors wound for 400 V. All motors can be used for vol-tages between 380 and 420 V.

Motors with voltage code c=1 can be connected in delta to operate in the range of 220–240 V.Motors with voltage code c=2 can be connected in star to operate in the range of 660–690 V.The correction factors on the current in the range of 400 V will then be: 220–240 V = 1.73 and660–690 V = 0.58.

The motors can also be wound for 500 V, and the voltage code is then c=5. The correction factor on thecurrent at 400 V is then 0.8.

The speeds, efficiencies and power factors are applicable at 230, 400, 690 and 500 V.

2)lst = Ratio of motor starting current to full-load current.l

Motor Data – Single-speed Motors, 50 Hz

Size designation At rated output 1)

Rated Currentoutput, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code 400 V, l M M ency, factors,APAL- kW r/min ca A η % cos ϕ kg

71A M2VA 71A 2-90037-c-d 0,37 2840 1,05 5,5 3,8 3,9 77,1 0,77 5,571B M2VA 71B 2-90055-c-d 0,55 2830 1,39 5,7 3,6 3,7 79,2 0,78 6,580A M2VA 80A 2-90075-c-d 0,75 2870 1,8 6,2 2,9 3,6 81,2 0,75 9

80B M2VA 80B 2-90110-c-d 1,1 2850 2,5 6,1 2,3 3,5 82,2 0,78 1190S M2AA 90S 2-90150-c-d 1,5 2870 3,35 5,5 2,4 3,0 80,1 0,82 1390L M2AA 90L 2-90220-c-d 2,2 2870 4,55 7 2,7 3,0 80,8 0,86 16

100L M2AA 100L 2-90300-c-d 3 2900 5,95 7,5 2,7 3,6 86 0,88 21112 M M2AA 112 M 2-00400-c-d 4 2850 7,4 7,5 2,8 3 86 0,91 25132 SM M2AA 132 SA 2-00550-c-d 5,5 2855 10,5 7,8 3,2 3,4 86 0,88 37

132 S M2AA 132 SB 2-00750-c-d 7,5 2855 13,9 8,5 3,4 3,6 87 0,90 42160 M M2AA 160 MA 2-01100-c-d 11 2930 20 6,3 1,9 2,5 91,2 0,88 73160 M M2AA 160 M 2-01500-c-d 15 2920 26,5 6,6 2,3 2,5 91,7 0,90 84

160 L M2AA 160 L 2-01850-c-d 18,5 2920 32 7,3 2,6 2,7 92,4 0,91 94180 M M2AA 180 M 2-02200-c-d 22 2930 38,5 7,2 2,5 2,7 92,8 0,89 119200 ML M2AA 200 MLA 2-03000-c-d 30 2955 53 7,3 2,4 3,1 93,2 0,88 175

200 ML M2AA 200 MLB 2-03700-c-d 37 2950 64 7,3 2,5 3,2 93,6 0,89 200225 SM M2AA 225 SMB 2-04500-c-d 45 2960 79 7,3 2,5 2,8 93,9 0,88 235250 SM M2AA 250 SMA 2-05500-c-d 55 2970 95 7,5 2 3 94,4 0,89 285

280 S M2CA 280 SA 2-07500-c-d 75 2977 131 7,4 2 2,9 94,9 0,88 480280 SM M2CA 280 SMA 2-09000-c-d 90 2975 152 7,2 2,1 2,7 95,3 0,90 545315 S M2CA 315 SA 2-11000-c-d 110 2982 194 7,6 2 3 95,5 0,86 695

315 SM M2CA 315 SMA 2-13200-c-d 132 2982 228 7,4 2,2 3 95,7 0,88 770315 M M2CA 315 MB 2-16000-c-d 160 2981 269 7,5 2,3 3 96,1 0,89 840

2 poles = 3000 r/min

Code suffix for voltage (c)1 = 220–240 V delta/380–420 V star

2 = 380–420 V delta/660–690 V star

5 = 500 V star (sizes 71–100)500 V delta (sizes 112–315)

Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 30: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 29Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©29

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ4 POLES = 1500R/MIN

0320 28 61 81 [email protected]

1) Correction factorsThe current values in the tables are applicable to motors wound for 400 V. All motors can be used forvoltages between 380 and 420 V.

Motors with voltage code c=1 can be connected in delta to operate in the range of 220–240 V.Motors with voltage code c=2 can be connected in star to operate in the range of 660–690 V.The correction factors on the current in the range of 400 V will then be: 220–240 V = 1.73 and660–690 V = 0.58.

The motors can also be wound for 500 V, and the voltage code is then c=5. The correction factor onthe current at 400 V is then 0.8

.The speeds, efficiencies and power factors are applicable at 230, 400, 690 and 500 V.

2)lst = Ratio of motor starting current to full-load current.l

Motor Data – Single-speed Motors, 50 Hz4 poles = 1500 r/min

Code suffix for voltage (c)1 = 220–240 V delat/380–420 V star

2 = 380–420 V delta/660–690 V star

5 = 500 V star (sizes 71–100)500 V delta (sizes 112–315)

Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor

Size designation At rated output 1)

Rated Currentoutput, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code 400 V, l M M ency, factors,APAL- kW r/min ca A η % cos ϕ kg

71A M2VA 71A 4-90025-c-d 0,25 1410 0,78 4,3 2,7 2,9 70,4 0,71 5,571B M2VA 71B 4-90037-c-d 0,37 1420 1,05 4,4 2,6 2,8 74,6 0,69 6,580A M2VA 80A 4-90055-c-d 0,55 1390 1,55 4,6 2,6 2,9 75,3 0,71 9

80B M2VA 80B 4-90075-c-d 0,75 1400 2,15 4,7 3,5 3,9 78,2 0,66 10,590S M2AA 90S 4-90110-c-d 1,1 1410 2,59 5 2,2 2,7 77,5 0,81 1390L M2AA 90L 4-90150-c-d 1,5 1420 3,45 5 2,4 2,9 80,3 0,79 16

100LA M2AA100 LA 4-90220-c-d 2,2 1430 4,8 5,5 2,4 2,9 83 0,81 21100LB M2AA100 LB 4-90300-c-d 3 1430 6,48 5,5 2,5 2,9 85 0,81 24112 M M2AA 112 M 4-00400-c-d 4 1435 8,6 7 2,9 3,1 85 0,80 27

132 S M2AA 132 S 4-00550-c-d 5,5 1450 11,1 7,3 2,2 3 87 0,83 40132 M M2AA 132 M 4-00750-c-d 7,5 1450 14,8 7,9 2,5 3,2 88 0,83 48160 M M2AA 160 M 4-01100-c-d 11 1460 21,5 6,7 2,9 2,8 90,3 0,81 75

160 L M2AA 160 L 4-01500-c-d 15 1455 28,5 6,8 3 2,8 91,1 0,84 94180 M M2AA 180 M 4-01850-c-d 18,5 1470 35 7 3,1 2,7 92,3 0,84 124180 L M2AA 180 L 4-02200-c-d 22 1470 41 7 2,9 2,8 92,4 0,83 141

200 ML M2AA 200 MLA 4-03000-c-d 30 1475 56 6,7 2,6 2,8 92,9 0,83 180225 SM M2AA 225 SMA 4-03700-c-d 37 1480 68 6,6 2,4 2,5 93,6 0,84 215225 SM M2AA 225 SMB 4-04500-c-d 45 1480 83 6,7 2,7 2,6 94,2 0,83 230

250 SM M2AA 250 SMA 4-05500-c-d 55 1480 98 7,5 2,3 2,8 94,6 0,86 275280 S M2CA 280 SA 4-07500-c-d 75 1483 137 6,9 2,2 2,8 94,6 0,84 445280 SM M2CA 280 SMA 4-09000-c-d 90 1484 163 7,6 2,5 2,9 95 0,85 490

315 S M2CA 315 SA 4-11000-c-d 110 1487 198 6,5 2,1 2,6 95,4 0,85 675315 SM M2CA 315 SMA 4-13200-c-d 132 1486 238 7,3 2,2 2,7 95,6 0,85 730315 M M2CA 315 MB 4-16000-c-d 160 1486 282 7 2,4 2,7 96 0,86 850

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 31: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 30Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©30

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ6 POLES = 1000R/MIN

0320 28 61 81 [email protected]

1) Correction factorsThe current values in the tables are applicable to motors wound for 400 V. All motors can be used for voltagesbetween 380 and 420 V.

Motors with voltage code c=1 can be connected in delta to operate in the range of 220–240 V.Motors with voltage code c=2 can be connected in star to operate in the range of 660–690 V.The correction factors on the current in the range of 400 V will then be: 220–240 V = 1.73 and 660–690 V = 0.58.

The motors can also be wound for 500 V, and the voltage code is then c=5. The correction factor onthe current at 400 V is then 0.8.

The speeds, efficiencies and power factors are applicable at 230, 400, 690 and 500 V.

2)lst = Ratio of motor starting current to full-load current.l

Motor Data – Single-speed Motors, 50 Hz6 poles = 1000 r/min

Size designation At rated output 1)

Rated Currentoutput, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code 400 V, l M M ency, factors,APAL- kW r/min ca A η % cos ϕ kg

71A M2VA 71A 6-90018-c-d 0,18 920 0,65 2,9 2,1 2,2 61,1 0,69 5,571B M2VA 71B 6-90025-c-d 0,25 920 0,86 3,2 2,5 2,7 64,9 0,64 6,580A M2VA 80A 6-90037-c-d 0,37 915 1,15 3,8 3,1 3,4 72,9 0,65 9

80B M2VA 80B 6-90055-c-d 0,55 900 1,72 3,4 2,9 3,1 73,3 0,64 1090S M2AA 90S 6-90075-c-d 0,75 930 2,36 4 1,9 2,3 71,5 0,67 1390L M2AA 90L 6-90110-c-d 1,1 930 3,25 4 1,9 2,3 74,4 0,69 16

100L M2AA 100L 6-90150-c-d 1,5 950 3,92 4,5 1,9 2,3 80 0,71 23112 M M2AA 112 M 6-00220-c-d 2,2 940 5,4 5,6 2,1 2,7 80,5 0,74 27132 S M2AA 132 S 6-00300-c-d 3 960 6,9 6,1 2,4 2,6 84,5 0,75 39

132 M M2AA 132 MA 6-00400-c-d 4 960 8,7 7,1 2,6 2,8 85,5 0,78 46132 M M2AA 132 MB 6-00550-c-d 5,5 955 11,9 6,9 2,8 2,8 86 0,78 54160 M M2AA 160 M 6-00750-c-d 7,5 970 15,4 6,7 2 2,8 89,3 0,79 88

160 L M2AA 160 L 6-01100-c-d 11 970 23 7,1 2,2 2,9 89,8 0,78 102180 L M2AA 180 L 6-01500-c-d 15 970 31 7 2,1 3 90,8 0,78 151200 ML M2AA 200 MLA 6-01850-c-d 18,5 985 36 7 2,5 2,7 91,1 0,81 165

200 ML M2AA 200 MLB 6-02200-c-d 22 980 43 7,2 2,5 2,7 91,7 0,81 185225 SM M2AA 225 SMB 6-03000-c-d 30 985 56 6,6 2,5 2,7 92,8 0,83 225250 SM M2AA 250 SMA 6-03700-c-d 37 985 69 7,3 2,8 2,8 93,7 0,83 280

280 S M2CA 280 SA 6-04500-c-d 45 990 85 7 2,6 2,6 94,2 0,82 440280 SM M2CA 280 SMA 6-05500-c-d 55 989 102 7 2,7 2,6 94,5 0,83 475315 S M2CA 315 SA 6-07500-c-d 75 990 143 6,8 2,2 2,6 94,7 0,81 630

315 SM M2CA 315 SMA 6-09000-c-d 90 989 163 7 2,3 2,5 95,2 0,84 720315 M M2CA 315 MB 6-11000-c-d 110 988 198 6,8 2,4 2,5 95,3 0,84 805

Code suffix for voltage (c)1 = 220–240 V delta/380–420 V star

2 = 380–420 V delta/660–690 V star

5 = 500 V star (sizes 71–100)500 V delta (sizes 112–315)

Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 32: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 31Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©31

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ8 POLES = 750R/MIN

0320 28 61 81 [email protected]

Motor Data – Single-speed Motors, 50 Hz

Size designation At rated output 1)

Rated Currentoutput, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code 400 V, l M M ency, factors,APAL- kW r/min ca A η % cos ϕ kg

80 A M2VA 80A 8-90018-c-d 0,18 700 0,85 3,1 3,2 3,6 59,9 0,53 1080 B M2VA 80B 8-90025-c-d 0,25 680 0,95 3,1 2,9 3,1 70,7 0,56 10,590 S M2AA 90S 8-90037-c-d 0,37 700 1,6 3 1,9 2,4 61,5 0,56 13

90 L M2AA 90L 8-90055-c-d 0,55 690 2,35 3 1,7 2,1 62,9 0,57 16,5100 L M2AA 100LA 8-90075-c-d 0,75 700 2,55 3,5 2,1 2,7 72 0,59 20100 L M2AA 100LB 8-90110-c-d 1,1 700 3,35 3,5 2,1 2,7 73 0,64 22

112 M M2AA 112 M 8-00150-c-d 1,5 695 4,5 4,1 1,9 2,4 75 0,65 28132 S M2AA 132 S 8-00220-c-d 2,2 720 5,9 5,3 1,9 2,5 81 0,67 46132 M M2AA 132 M 8-00300-c-d 3 720 7,8 5,5 2,4 2,6 82 0,68 53

160 M M2AA 160 MA 8-00400-c-d 4 715 10 5,2 2,1 2,4 84 0,69 75160 M M2AA 160 M 8-00550-c-d 5,5 710 13,4 5,4 2,4 2,6 85 0,70 88160 L M2AA 160 L 8-00750-c-d 7,5 715 18,1 5,4 2,4 2,8 86 0,70 118

180 L M2AA 180 L 8-01100-c-d 11 720 23,5 5,9 2,4 2,6 89 0,76 147200 ML M2AA 200 MLA 8-01500-c-d 15 740 29 7,4 1,8 3 91,1 0,82 175225 SM M2AA 225 SMA 8-01850-c-d 18,5 730 37 6,2 1,9 2,7 91,1 0,79 210

225 SM M2AA 225 SMB 8-02200-c-d 22 730 45 6 1,9 2,7 91,5 0,77 225250 SM M2AA 250 SMA 8-03000-c-d 30 735 59 6,9 1,9 2,9 92,8 0,79 280280 S M2CA 280 SA 8-03700-c-d 37 741 74 6,8 1,6 2,7 93 0,78 460

280 SM M2CA 280 SMA 8-04500-c-d 45 741 90 7,1 1,8 2,8 93,5 0,78 500315 S M2CA 315 SA 8-05500-c-d 55 741 107 7,1 1,8 2,8 94 0,80 630315 SM M2CA 315 SMA 8-07500-c-d 75 740 142 7,1 1,8 2,8 94,5 0,81 715

315 M M2CA 315 MB 8-09000-c-d 90 740 169 7,3 1,9 2,8 94,7 0,82 800

8 poles = 750 r/min

Code suffix for voltage (c)1 = 220–240 V delta/380–420 V star

2 = 380–420 V delta/660–690 V star

5 = 500 V star (sizes 71–100)500 V delta (sizes 112–315)

Temperature sensors in the stator winding, code suffix (d)0 = without1 = with bimetal temperature contacts2 = with thermistor

1) Correction factorsThe current values in the tables are applicable to motors wound for 400 V. All motors can be used for voltagesbetween 380 and 420 V.

Motors with voltage code c=1 can be connected in delta to operate in the range of 220–240 V.Motors with voltage code c=2 can be connected in star to operate in the range of 660–690 V.The correction factors on the current in the range of 400 V will then be: 220–240 V = 1.73 and 660–690 V = 0.58.

The motors can also be wound for 500 V, and the voltage code is then c=5. The correction factor on the current at400 V is then 0.8.

The speeds, efficiencies and power factors are applicable at 230, 400, 690 and 500 V.

2)lst = Ratio of motor starting current to full-load current.l

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 33: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 32Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©32

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ2/4 POLES = 3000/1500 R/MIN - 1-STATOR WINDING (DAHLANDER-WOUND)

0320 28 61 81 [email protected]

1) Correction factorsCorrection factors for current at other voltages:230 V = 1.74 ; 500 V = 0.80The speeds, efficiencies and power factors are applicable at 230,400 and 500 V.

2)lst = Ratio of motor starting current to full-load currentl

Motor Data – Two-speed Motors, 50 Hz

Size designation At rated output 1)

No. Rated Currentof output, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code motor 400 V, l M M ency, factors,ARAL-2- poles kW r/min ca A η % cos ϕ kg

71 M2VA 71 B 90055-c-d 2 0,55 2700 1,3 3,8 1,4 1,5 67 0,91 6,54 0,12 1470 0,75 3,4 2,2 2,3 55 0,42

80 M2VA 80 A 90075-c-d 2 0,75 2850 1,8 4,9 2,2 2,3 73 0,83 94 0,15 1430 0,65 3,9 2,4 2,5 52 0,65

80 M2VA 80 B 90110-c-d 2 1,1 2840 2,6 4,9 2,2 2,3 73 0,84 114 0,25 1430 0,9 3,9 2,2 2,3 60 0,67

90 S M2AA 90 S 90150-c-d 2 1,5 2860 3,3 5,2 1,8 2,4 77 0,87 134 0,33 1460 1,1 3,9 1,1 2,1 66 0,67

90 L M2AA 90 L 90220-c-d 2 2,2 2860 4,6 5,9 2,1 2,6 80 0,88 164 0,45 1460 1,4 4,4 1,2 2,3 73 0,65

100 L M2AA 100 LB 90350-c-d 2 3,5 2880 7 6,2 2,1 2,6 80 0,91 254 0,7 1470 2 4,8 1,2 3 77 0,65

112 M M2AA 112 M 00451-c-d 2 4,5 2875 8,4 7 1,8 2,3 83 0,93 324 1 1450 2,4 6 1,9 2,8 80 0,76

132 S M2AA 132 S 00620-c-d 2 6,2 2880 11,8 7 2 2,6 84 0,91 424 1,3 1455 3,5 6,5 2,6 3,3 80 0,67

132 M M2AA 132 M 00830-c-d 2 8,3 2875 15,4 7,4 2,5 2,7 84 0,93 564 1,7 1455 4,2 6,6 2,7 3,3 82 0,71

160 M M2AA 160MA 01000-c-d 2 10 2910 19 5,9 1,5 2,3 85 0,89 734 2 1465 4,8 6,1 2,4 2,8 83,5 0,73

160 M M2AA 160 M 01600-c-d 2 16 2915 28,5 6,6 1,8 2,4 87,5 0,92 944 3,2 1465 7 6,3 2,5 2,8 86,5 0,76

160 L M2AA 160 L 01950-c-d 2 19,5 2930 36 7,6 2,3 2,9 89 0,89 1004 4,5 1465 9,7 6,4 2,5 2,8 88 0,77

180 M M2AA 180 M 02150-c-d 2 21,5 2935 38 7 2,1 2,6 90 0,91 1374 4,7 1465 10 5,3 2,1 2,3 88 0,77

180 L M2AA 180 L 02600-c-d 2 26 2940 47 6,9 2,3 2,6 90,5 0,89 1514 5,2 1470 11 5,8 2,4 2,4 89,5 0,75

200 ML M2AA 200 MLA 03200-c-d 2 32 2940 58 7,1 2 2,5 90 0,89 1804 8 1465 16 6,2 2 2,2 89 0,85

200 ML M2AA 200 MLB 03900-c-d 2 39 2950 69 7,4 2 2,6 91,5 0,89 2054 10 1475 19 6,2 2 2,3 91 0,85

2 42 2950 75 7,7 2,2 3 92,5 0,89 205200 ML M2AA 200 MLC 04200-c-d 4 11 1470 23 5,6 2,1 2,5 91 0,77

225 SM M2AA 225 SMB 04500-c-d 2 45 2955 76 7,4 2 2,6 93 0,92 2354 13 1475 25 5,3 2 2,1 91,5 0,82

225 SM M2AA 225 SMC 05500-c-d 2 55 2955 94 7,3 2 2,6 93,5 0,91 2604 15 1475 29 5,4 2 2,2 92,5 0,82

250 SM M2AA 250 SMB 07500-c-d 2 75 2955 125 8,9 2,3 3,1 94,5 0,92 3304 25 1475 48 5,5 2 2,2 93 0,82

2/4 poles = 3000/1500 r/minOne stator winding (Dahlander wound)

Code suffix for voltage (c)

1 = 220–230 V (sizes 71–132)230 V (sizes 160–250)

2 = 380–400 V (sizes 112–132)400 V (sizes 160–315)

4 = 400–415 V (sizes 71–100)415 V (sizes 160–315)

5 = 500 V (sizes 71–315)

Temperature sensors in the stator winding, code suffix (d)

0 = without1 = with bimetal temperature contacts2 = with thermistor

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com

Page 34: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 33Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©33

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ4/6 POLES = 1500/1000 R/MIN - TWO SEPARATE WINDINGS

0320 28 61 81 [email protected]

Motor Data – Two-speed Motors, 50 Hz4/6 poles = 1500/1000 r/min

Two separate windings

Size designation At rated output 1)

No. Rated Currentof output, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code motor 400 V, l M M ency, factors,ATAL-4- poles kW r/min ca A η % cos ϕ kg

71 M2VA 71 B 90030-c-d 4 0,3 1350 0,9 2,8 1 1,1 54 0,86 6,56 0,1 900 0,6 2 1,05 1,15 30 0,79

80 M2VA 80 A 90045-c-d 4 0,45 1390 1,2 3,2 1,6 1,7 65 0,85 106 0,15 945 0,7 3 1,5 1,6 42 0,75

80 M2VA 80 B 90075-c-d 4 0,75 1400 1,9 3,3 1,7 1,8 67 0,86 10,56 0,22 955 0,9 3,2 1,6 1,7 48 0,74

90 S M2AA 90 S 90100-c-d 4 1 1400 2,5 4,3 1,8 2,2 73 0,83 136 0,3 940 1,2 2,6 1 1,7 53 0,7

90 L M2AA 90 L 90150-c-d 4 1,5 1400 3,5 4,3 1,7 2,1 72 0,84 166 0,45 930 1,6 2,9 1 1,8 52 0,73

100 L M2AA 100 LA 90200-c-d 4 2 1430 4,5 5 1,8 2,4 77 0,85 206 0,6 960 2 3,3 1 1,9 62 0,72

100 L M2AA 100 LB 90250-c-d 4 2,5 1430 5,5 5,6 2 2,5 79 0,84 236 0,8 960 2,5 3,5 1,1 2 68 0,71

112 M M2AA 112 M 00300-c-d 4 3 1445 6,3 6 1,3 2,3 82 0,84 336 1 975 3,1 4 1 2,2 67 0,68

132 S M2AA 132 S 00450-c-d 4 4,5 1460 9,2 6,5 1,5 2,3 83 0,85 486 1,5 985 5,1 4,2 1 2,2 67 0,64

132 M M2AA 132 M 00600-c-d 4 6 1460 12 7,1 1,8 2,5 84 0,86 596 2 980 5,6 4,5 1,3 2 71 0,73

160 M M2AA 160 M 01050-c-d 4 10,5 1460 21 6,4 2 2,5 87 0,84 946 3,5 965 8,6 4,1 1,3 1,7 75,5 0,78

160 L M2AA 160 L 01450-c-d 4 14,5 1460 28 6,9 2,2 2,6 88,5 0,85 1176 4,5 970 11 4,6 1,5 1,9 77 0,76

180 M M2AA 180 M 01601-c-d 4 16 1470 31 6,3 1,9 2,5 89 0,83 1376 5 980 12,5 4,6 1,5 2 78 0,73

180 L M2AA 180 L 02001-c-d 4 20 1470 39 7,2 2,4 2,7 90 0,83 1616 6,5 980 16 5 1,8 2 79,5 0,74

200 ML M2AA 200 MLA 02300-c-d 4 23 1475 43 7,7 1,6 2,8 89,5 0,88 1756 7,2 985 15 7,8 1,9 2,9 84 0,87

200 ML M2AA 200 MLB 03000-c-d 4 30 1470 54 7,7 1,6 2,7 90 0,90 2006 9 985 18 7,9 1,7 2,5 83,5 0,89

225 SM M2AA 225 SMB 03400-c-d 4 34 1470 60 7,7 1,5 2,7 91 0,91 2256 11 985 21 6,7 1,3 2,3 85 0,89

225 SM M2AA 225 SMC 04200-c-d 4 42 1475 75 8,4 1,7 3 91,5 0,89 2556 14 985 27 6,8 1,4 2,3 89 0,89

250 SM M2AA 250 SMB 06300-c-d 4 63 1475 110 7,5 2,4 2,7 93,5 0,89 3356 18,5 985 40 7,3 3 2,6 87 0,79

280 SM M2CA 280 SMA 07700-c-d 4 77 1486 144 7,6 2,4 2,9 93,9 0,83 4906 25 991 54 7,7 3,2 2,7 89,3 0,76

280 M M2CA 280 MB 09000-c-d 4 90 1485 161 7,4 2,3 2,7 94,2 0,86 5506 28 991 58 7,7 3,2 2,8 89,8 0,78

315 SM M2CA 315 SMA 11000-c-d 4 110 1489 199 6,6 1,9 2,6 95,2 0,85 7306 32 992 67 6,5 2,8 2,9 91,2 0,78

315 M M2CA 315 MB 12500-c-d 4 125 1488 219 6,6 1,9 2,4 95,5 0,86 8506 37 992 75 6,4 2,9 2,8 92,2 0,79

315 L M2CA 315 LA 15000-c-d 4 150 1488 260 6,6 1,9 2,4 95,7 0,87 9706 44 991 88 6,4 3 2,7 92,6 0,79

Code suffix for voltage (c)

1 = 220–230 V (sizes 71–132)230 V (sizes 160–250)

2 = 380–400 V (sizes 112–132)400 V (sizes 160–315)

4 = 400–415 V (sizes 71–100)415 V (sizes 160–315)

5 = 500 V (sizes 71–315)

1) Correction factorsCorrection factors for current at other voltages:230 V = 1.74 ; 500 V = 0.80The speeds, efficiencies and power factors are applicable at230, 400 and 500 V.

2)lst = Ratio of motor starting current to full-load currentl

Temperature sensors in the stator winding, code suffix (d)

0 = without1 = with bimetal temperature contacts2 = with thermistor

Page 35: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 34Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©34

MOTOR DATA - SINGLE-SPEED MOTORS, 50 HZ4/8 POLES = 1500/750 R/MIN - 1-STATOR WINDING (DAHLANDER-CONNECTION)

0320 28 61 81 [email protected]

Motor Data – Two-speed Motors, 50 Hz

Size designation At rated output 1)

No. Rated Currentof output, Speed, at lst 2) Mst Mmax Effici- Power Weight,

IEC ABB Motors Ordering code motor 400 V, l M M ency, factors,ARAL-4- poles kW r/min ca A η % cos ϕ kg

71 M2VA 71 B 90037-c-d 4 0,37 1360 1,1 3,1 1,3 1,4 58 0,84 6,58 0,09 700 0,48 1,7 1,8 1,9 19 0,52

80 M2VA 80 A 90055-c-d 4 0,55 1410 1,7 3,6 1,9 2 62 0,74 98 0,11 690 0,6 2,4 1,6 1,7 40 0,65

80 M2VA 80 B 90075-c-d 4 0,75 1410 2,1 3,7 2 2,1 69 0,76 10,58 0,2 690 1 2,4 1,6 1,7 46 0,64

90 S M2AA 90 S 90110-c-d 4 1,1 1410 2,8 4,2 1, 8 2,3 73 0,80 138 0,26 700 1,2 2,4 1,2 1,9 53 0,63

90 L M2AA 90 L 90170-c-d 4 1,7 1390 4,0 4,5 2,2 2,6 74 0,82 168 0,35 700 1,6 2,5 1,5 2,1 57 0,57

100 L M2AA 100 LA 90230-c-d 4 2,3 1415 5,2 4,6 1,8 2,4 76 0,84 208 0,5 715 1,9 2,7 1,2 1,9 63 0,6

100 L M2AA 100 LB 90280-c-d 4 2,8 1430 6,4 5,2 2 2,6 81 0,82 238 0,6 720 2,2 3 1,2 2,2 68 0,58

112 M M2AA 112 M 00350-c-d 4 3,5 1430 7 6,8 1,6 2,5 81 0,89 328 0,7 720 2,5 4,4 1,7 2,7 71 0,58

132 S M2AA 132 S 00500-c-d 4 5 1450 9,9 6,4 1,5 2,3 83 0,87 488 1 725 3,3 3,6 1 2 74 0,59

132 M M2AA 132 M 00680-c-d 4 6,8 1460 13,7 7,6 2 2,8 85 0,84 598 1,4 730 5,1 3,6 1,4 2,7 73 0,55

160 M M2AA 160 M 01050-c-d 4 10,5 1460 21 6,9 2,2 2,7 87,5 0,84 948 2,2 735 7,4 3,7 1,5 2,3 79 0,54

160 L M2AA 160 L 01550-c-d 4 15,5 1460 30 6,9 2,2 2,6 88,5 0,85 1178 2,7 735 9,5 3,9 1,7 2,6 79,5 0,51

180 M M2AA 180 M 01700-c-d 4 17 1470 33 5,8 1,7 2,3 88,5 0,85 1378 3,4 730 11 4,3 1,2 1,9 78 0,56

180 L M2AA 180 L 02200-c-d 4 22 1475 43 6,7 2 2,6 89,5 0,83 1618 4,4 735 15 3,9 1,7 2,3 79 0,53

200 ML M2AA 200 MLA 02900-c-d 4 29 1470 54 6,9 2,2 2,4 90,5 0,86 1808 6,5 730 17 4,2 1,9 1,9 86 0,64

200 ML M2AA 200 MLB 03300-c-d 4 33 1475 61 7,8 2,6 2,6 91,5 0,86 2058 8 730 21 4,2 1,9 1,8 86,5 0,64

225 SM M2AA 225 SMB 04200-c-d 4 42 1480 85 7,8 2,5 3 92 0,78 2658 10 740 27 5 2,2 2,3 89,5 0,61

225 SM M2AA 225 SMC 05000-c-d 4 50 1465 91 7,3 2,3 2,5 92,5 0,87 2658 11 735 28 4,7 2 2 89,5 0,65

250 SM M2AA 250 SMB 06000-c-d 4 60 1475 104 7,9 2,6 2,7 93 0,86 3358 15 735 34 4,7 2,1 2 90 0,70

280 S M2CA 280 SA 06500-c-d 4 65 1484 121 7,5 2,7 2,9 93,2 0,84 4458 15 743 38 5,3 2,8 2,3 90 0,63

280 SM M2CA 280 SMA 08000-c-d 4 80 1486 150 8,5 3,3 3,4 93,8 0,83 4908 20 743 50 5,4 2,9 2,6 91,5 0,63

280 M M2CA 280 MB 09000-c-d 4 90 1486 164 8,8 3,6 3,5 94,1 0,85 5508 23 742 56 5,4 2,8 2,6 91,8 0,64

315 SM M2CA 315 SMA 11000-c-d 4 110 1487 197 6,8 1,9 2,6 94,6 0,85 7308 22 744 56 4,9 2,1 2,5 92,5 0,62

315 M M2CA 315 MB 13200-c-d 4 132 1486 235 6,8 2 2,6 94,9 0,86 8508 26 746 65 4,8 2 2,4 93 0,64

315 L M2CA 315 LA 16000-c-d 4 160 1486 283 7 2,1 2,7 95,2 0,86 9708 32 743 80 4,8 2,1 2,5 93,4 0,64

4/8 poles = 1500/750 r/minOne stator winding (Dahlander-connection)

Delkod för spänning (c)

1 = 220–230 V (sizes 71–132)230 V (sizes 160–250)

2 = 380–400 V (sizes 112–132)400 V (sizes 160–315)

4 = 400–415 V (sizes 71–100)415 V (sizes 160–315)

5 = 500 V (sizes 71–315)

1) Correction factorsCorrection factors for current at other voltages:230 V = 1.74 ; 500 V = 0.80The speeds, efficiencies and power factors are applicable at230, 400 and 500 V.

2)lst = Ratio of motor starting current to full-load currentl

Temperature sensors in the stator winding, code suffix (d)

0 = without1 = with bimetal temperature contacts2 = with thermistor

Page 36: CENTRIFUGAL FANS - GTL-3

Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 © 35Centrifugal fans - GTL-3 - HEINEN & HOPMAN 2020 ©35

www.heinenhopman.com

Heinen & Hopman encourages a more

sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

the option of reducing energy consumption

and thus CO2 emissions.

Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

AustriaT: +43 1720 1309E: [email protected]

BrazilT: +55 213 587 4241/4244E: [email protected]

CanadaT:+1 450 659 6571E: [email protected]

DenmarkT: +45 5164 1614E: [email protected]

France - La CiotatT: +33 4 4204 8685E: [email protected]

France - AntibesT: +33 4 8902 4562 E: [email protected]

GermanyT:+49 4073 1680E: [email protected]

GermanyT:+49 471 9869 300E: [email protected]

IndiaT: +91 336 499 1293E: [email protected]

ItalyT: +39 187 187 8500E: [email protected]

The Netherlands (HQ)T: +31 33 299 2500E: [email protected]

The Netherlands - RotterdamT: +31 18 020 9210E: [email protected]

NorwayT: +47 6919 0900E: [email protected]

Peoples Republic of ChinaT: +86 213 253 2896E: [email protected]

Peoples Republic of ChinaT: +86 510 8528 1763E: [email protected]

PolandT: +48 914 331 800E: [email protected]

RomaniaT: +40 236 448 222E: [email protected]

RussiaT: +7 812 449 3535E: [email protected]

SingaporeT: +65 6897 7879E: [email protected]

South KoreaT: +82 704 901 0000E: [email protected]

SpainT: +34 932 259 668E: [email protected]

SwedenT: +46 3121 7500E: [email protected]

TurkeyT: +90 216 493 8118E: [email protected]

UAE - Abu Dhabi T:+971 2550 4147E: [email protected]

UAE - DubaiT: +971 4263 5453E: [email protected]

USA - Seattle, Washington T: +1 206 632 7883E: [email protected]

USA - Fort Lauderdale, FloridaT: +1 954 463 0110E: [email protected]

USA - Houma, Louisiana T: +1 985 876 7982E: [email protected]

Do you require more information about our products or do you require advice? I am keen to help you further!

“ “

Bas Veltman- Sales Manager [email protected]