Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1311

1 Equipment name : Potble Water Transfer Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 16 m³/h ; rated : 19 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 3.813 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.918 bara

6 Pumping temperature (p.t.) : 25 °C Differential pressure : 3 bar

7 Pumping temperature max. : 37.5 °C Differential head : 30 m. liq.

8 Density at pumping temperature : 997 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.89 mPa.s NPSH available : 8.07 m. liq.

10 Vapour pressure at pumping temp. : 0.032 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : m. liq.

12 * to be stated by vendor Minimum continuous flow : m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 1.544 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : *

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

*

*

*

*

*

*

A 2/7/2014 IDC RK

Rev. Date By

LG

*

*

*

*

*

*

Spec./Data sheet for: (CONTINUATION)

Cost Acc. Code: Item no.:PU-1311

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of: 2

Description

Dri

ve

rs &

Tra

nsm

issio

nR

em

ark

s

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1312

1 Equipment name : Potble Water Transfer Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 16 m³/h ; rated : 19 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 3.813 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.918 bara

6 Pumping temperature (p.t.) : 25 °C Differential pressure : 3 bar

7 Pumping temperature max. : 37.5 °C Differential head : 30 m. liq.

8 Density at pumping temperature : 997 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.89 mPa.s NPSH available : 8.07 m. liq.

10 Vapour pressure at pumping temp. : 0.032 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : m. liq.

12 * to be stated by vendor Minimum continuous flow : m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 1.544 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : *

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1312

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of: 2

Dri

ve

rs &

Tra

nsm

issio

nR

em

ark

s

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1411

1 Equipment name : Cooling tower pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 360 m³/h ; rated : 360 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 4.43 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.92 bara

6 Pumping temperature (p.t.) : 35 °C Differential pressure : 2.013 bar

7 Pumping temperature max. : 52.5 °C Differential head : 36 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.719 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.056 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 35.08 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : *

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1411

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of: 2

Dri

ve

rs &

Tra

nsm

issio

nR

em

ark

s

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1412

1 Equipment name : Cooling tower pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 360 m³/h ; rated : 360 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 4.43 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.92 bara

6 Pumping temperature (p.t.) : 35 °C Differential pressure : 2.013 bar

7 Pumping temperature max. : 52.5 °C Differential head : 36 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.719 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.056 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 35.08 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : *

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1412

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of: 2

Dri

ve

rs &

Tra

nsm

issio

nR

em

ark

s

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1413

1 Equipment name : Cooling tower pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 360 m³/h ; rated : 360 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 4.43 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.92 bara

6 Pumping temperature (p.t.) : 35 °C Differential pressure : 2.013 bar

7 Pumping temperature max. : 52.5 °C Differential head : 36 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.719 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.056 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 35.08 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1413

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1511

1 Equipment name : Primary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 2.844 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.883 bara

6 Pumping temperature (p.t.) : 12 °C Differential pressure : 1.013 bar

7 Pumping temperature max. : 18 °C Differential head : 20 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.23 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.014 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 13.73 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1511

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1512

1 Equipment name : Primary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 2.844 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.883 bara

6 Pumping temperature (p.t.) : 12 °C Differential pressure : 1.013 bar

7 Pumping temperature max. : 18 °C Differential head : 20 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.23 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.014 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 13.73 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1512

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1513

1 Equipment name : Primary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 2.844 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.883 bara

6 Pumping temperature (p.t.) : 12 °C Differential pressure : 1.013 bar

7 Pumping temperature max. : 18 °C Differential head : 20 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.23 mPa.s NPSH available : 7.87 m. liq.

10 Vapour pressure at pumping temp. : 0.014 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 13.73 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1513

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1521

1 Equipment name : Secondary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 6.077 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.881 bara

6 Pumping temperature (p.t.) : 6 °C Differential pressure : 3.21 bar

7 Pumping temperature max. : 9 °C Differential head : 53 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.475 mPa.s NPSH available : 7.89 m. liq.

10 Vapour pressure at pumping temp. : 0.009 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 36.37 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1521

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1522

1 Equipment name : Secondary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 6.077 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.881 bara

6 Pumping temperature (p.t.) : 6 °C Differential pressure : 3.21 bar

7 Pumping temperature max. : 9 °C Differential head : 53 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.475 mPa.s NPSH available : 7.89 m. liq.

10 Vapour pressure at pumping temp. : 0.009 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 36.37 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1522

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1523

1 Equipment name : Secondary Chilled Water Pump Number required (incl. spare) :

2 Liquid pumped : Water Capacity normal: 252 m³/h ; rated : 252 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 6.077 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.881 bara

6 Pumping temperature (p.t.) : 6 °C Differential pressure : 3.21 bar

7 Pumping temperature max. : 9 °C Differential head : 53 m. liq.

8 Density at pumping temperature : 1000 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 1.475 mPa.s NPSH available : 7.89 m. liq.

10 Vapour pressure at pumping temp. : 0.009 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : outdoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 36.37 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1523

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1821

1 Equipment name : Hot Water Secondary Circulation Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 72 m³/h ; rated : 86 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 5.76 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 1.234 bara

6 Pumping temperature (p.t.) : 95 °C Differential pressure : 2.955 bar

7 Pumping temperature max. : 142.5 °C Differential head : 48 m. liq.

8 Density at pumping temperature : 962 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.297 mPa.s NPSH available : 3.62 m. liq.

10 Vapour pressure at pumping temp. : 0.85 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 10.86 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1821

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1822

1 Equipment name : Hot Water Secondary Circulation Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 72 m³/h ; rated : 86 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 5.76 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 1.234 bara

6 Pumping temperature (p.t.) : 95 °C Differential pressure : 2.955 bar

7 Pumping temperature max. : 142.5 °C Differential head : 48 m. liq.

8 Density at pumping temperature : 962 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.297 mPa.s NPSH available : 3.62 m. liq.

10 Vapour pressure at pumping temp. : 0.85 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 10.86 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : Cast Iron Packing : *

49 Casing wearring : Cast Iron Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1822

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1823

1 Equipment name : Hot Water Secondary Circulation Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 22 m³/h ; rated : 22 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 9.37 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 4.55 bara

6 Pumping temperature (p.t.) : 60 °C Differential pressure : 3.17 bar

7 Pumping temperature max. : 90 °C Differential head : 50 m. liq.

8 Density at pumping temperature : 983 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.47 mPa.s NPSH available : 44.14 m. liq.

10 Vapour pressure at pumping temp. : 0.2 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 2.943 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : CS Packing : *

49 Casing wearring : CS Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1823

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1824

1 Equipment name : Hot Water Secondary Circulation Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 22 m³/h ; rated : 22 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 9.37 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 4.55 bara

6 Pumping temperature (p.t.) : 60 °C Differential pressure : 3.17 bar

7 Pumping temperature max. : 90 °C Differential head : 50 m. liq.

8 Density at pumping temperature : 983 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.47 mPa.s NPSH available : 44.14 m. liq.

10 Vapour pressure at pumping temp. : 0.2 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 2.943 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : CS Packing : *

49 Casing wearring : CS Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1824

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1825

1 Equipment name : Fat Handling Hot Water Supply Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 26 m³/h ; rated : 26 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 7.57 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 3.57 bara

6 Pumping temperature (p.t.) : 80 °C Differential pressure : 2.367 bar

7 Pumping temperature max. : 120 °C Differential head : 42 m. liq.

8 Density at pumping temperature : 972 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.35 mPa.s NPSH available : 31.5 m. liq.

10 Vapour pressure at pumping temp. : 0.47 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 2.89 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : CS Packing : *

49 Casing wearring : CS Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1825

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-1826

1 Equipment name : Fat Handling Hot Water Supply Pump Number required (incl. spare) :

2 Liquid pumped : Hot Water Capacity normal: 26 m³/h ; rated : 26 m³/h

3 Operation : continuous Discharge pressure at rated capacity : 7.57 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 3.57 bara

6 Pumping temperature (p.t.) : 80 °C Differential pressure : 2.367 bar

7 Pumping temperature max. : 120 °C Differential head : 42 m. liq.

8 Density at pumping temperature : 972 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.35 mPa.s NPSH available : 31.5 m. liq.

10 Vapour pressure at pumping temp. : 0.47 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 2.89 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : oil Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : CS Packing : *

49 Casing wearring : CS Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-1826

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be suitable for water services.

25 Sizes & details to be furnished later by Instrument group.

26 Supplier to confirm insulation requirement , type & thickness

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2311

1 Equipment name : CIP Hot Water Recirculation Pump Number required (incl. spare) :

2 Liquid pumped : CIP Water Capacity normal: 4 m³/h ; rated : 4.4 m³/h

3 Operation : Intermittent Discharge pressure at rated capacity : 2.236 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.977 bara

6 Pumping temperature (p.t.) : 85 °C Differential pressure : 0.748 bar

7 Pumping temperature max. : 127.5 °C Differential head : 13.3 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.33 mPa.s NPSH available : 3.2 m. liq.

10 Vapour pressure at pumping temp. : 0.578 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 0.15 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : *

35 for pump and driver By MFR : * Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2311

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be of SS 316 / SS 316L

25 Supplier to confirm insulation requirement , type & thickness

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2321

1 Equipment name : Caustic Recirculation Pump Number required (incl. spare) :

2 Liquid pumped : 2% Caustic Solution in water Capacity normal: 4 m³/h ; rated : 4.4 m³/h

3 Operation : Intermittent Discharge pressure at rated capacity : 2.236 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : Yes Suction pressure max. : 0.977 bara

6 Pumping temperature (p.t.) : 85 °C Differential pressure : 0.748 bar

7 Pumping temperature max. : 127.5 °C Differential head : 13.3 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.33 mPa.s NPSH available : 3.2 m. liq.

10 Vapour pressure at pumping temp. : 0.578 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 0.15 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : *

35 for pump and driver By MFR : * Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2321

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be of SS 316 / SS 316L

25 Supplier to confirm insulation requirement , type & thickness

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2331

1 Equipment name : Reclaim Water Recirculation Pump Number required (incl. spare) :

2 Liquid pumped : Reclaim Water Capacity normal: 4 m³/h ; rated : 4.4 m³/h

3 Operation : Intermittent Discharge pressure at rated capacity : 2.236 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.977 bara

6 Pumping temperature (p.t.) : 85 °C Differential pressure : 0.748 bar

7 Pumping temperature max. : 127.5 °C Differential head : 13.3 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.33 mPa.s NPSH available : 3.2 m. liq.

10 Vapour pressure at pumping temp. : 0.578 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 0.15 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : *

35 for pump and driver By MFR : * Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2331

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be of SS 316 / SS 316L

25 Supplier to confirm insulation requirement , type & thickness

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2351

1 Equipment name : CIP Supply Pump Number required (incl. spare) :

2 Liquid pumped : CIP Hot Water ( 2% Caustic) Capacity normal: 16 m³/h ; rated : 19.2 m³/h

3 Operation : Intermittent Discharge pressure at rated capacity : 5.98 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : yes Suction pressure max. : 0.966 bara

6 Pumping temperature (p.t.) : 85 °C Differential pressure : 0.408 bar

7 Pumping temperature max. : 127.5 °C Differential head : 52.8 m. liq.

8 Density at pumping temperature : 969 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 0.33 mPa.s NPSH available : 3.58 m. liq.

10 Vapour pressure at pumping temp. : 0.578 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 2.67 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : *

35 for pump and driver By MFR : * Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2351

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC of all wetted part shall be of SS 316 / SS 316L

25 Supplier to confirm insulation requirement , type & thickness

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2341

1 Equipment name : Caudtic Dosing Pump Number required (incl. spare) :

2 Liquid pumped : 31% Caustic Capacity normal: 1.5 m³/h ; rated : 1.5 m³/h

3 Operation : Intermittent Discharge pressure at rated capacity : 2.1 bara

4 Solids : <4% %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : yes Suction pressure max. : 0.822 bara

6 Pumping temperature (p.t.) : °C Differential pressure : 0.295 bar

7 Pumping temperature max. : 37.5 °C Differential head : 9.7 m. liq.

8 Density at pumping temperature : 1343 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 12 mPa.s NPSH available : 5 m. liq.

10 Vapour pressure at pumping temp. : bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Drum Unloading Pump Suction * *

15 Model : * Discharge * *

16 Location : Indoor Vent * *

17 Arrangement : * Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 0.05 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : * Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : *

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : * Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : * ; type : * Performance yes no

37 Coupling guard : * ; type : * Hydrostatic yes no

38 Foundation bolts : * ; by MFR: * NPSH yes no

39 Slide rails : * Single

40 MFR : * ;type : Single

41 Smothering gland : * Flushing liquid : *

42 Shipment of seal/packing : * Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : *

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

25 (Ambient)

0.032 (@ 25 °C)

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2341

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : *

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 * To be provided by vendor

23 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 MOC for all contacting parts shall be suitable for caustic service

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Description

Dri

ve

rs &

Tra

nsm

issio

nR

em

ark

s

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2411

1 Equipment name : Plam Oil Unloading Pump Number required (incl. spare) :

2 Liquid pumped : Plalm Oil Capacity normal: 40 m³/h ; rated : 48.0 m³/h

3 Operation : continuous (Batch) Discharge pressure at rated capacity : 3.32 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.902 bara

6 Pumping temperature (p.t.) : 60 °C Differential pressure : 1.4 bar

7 Pumping temperature max. : 78 °C Differential head : 27 m. liq.

8 Density at pumping temperature : 920 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 18 mPa.s NPSH available : 9 m. liq.

10 Vapour pressure at pumping temp. : 0 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * End

15 Model : * Discharge * Top

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 3.23 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : * Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : no

35 for pump and driver By MFR : no Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: * NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : * Flushing liquid : *

42 Shipment of seal/packing : * Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316 / SS316L Packing : *

49 Casing wearring : SS316 / SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

A 2/7/2014 IDC RK LG

* *

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2411

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 1 * To be provided by vendor

23 2 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 3 MOC of all wetted part shall be of SS 316 / SS 316L

25 4 Pump Shall be hot water jackated Design with temperature of 80 °C , Jacket MOC- SS304L

26 Hot water jacket Design conditions: Design Press-6 barg, Design Temperature- 100 °C

27 5 Supplier to confirm insulation requirement , type & thickness

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description

Spec./Data sheet for: CENTRIFUGAL PUMPCost Acc. Code: * Vendor: * Item no.: PU-2421

1 Equipment name : Palm Oil Transfer Pump Number required (incl. spare) :

2 Liquid pumped : Palm Oil Capacity normal: 2 m³/h ; rated : 2.4 m³/h

3 Operation : continuous (Batch) Discharge pressure at rated capacity : 3.45 bara

4 Solids : - %; max. size : mm Suction pressure min. : - bara

5 Corrosive/Erosive service : no Suction pressure max. : 0.98 bara

6 Pumping temperature (p.t.) : 60 °C Differential pressure : 1.34 bar

7 Pumping temperature max. : 78 °C Differential head : 27.32 m. liq.

8 Density at pumping temperature : 920 kg/m³ Shut-off head : * m. liq.

9 Viscosity at pumping temperature : 18 mPa.s NPSH available : 9.87 m. liq.

10 Vapour pressure at pumping temp. : 0 bara NPSH required : * m. liq.

11 Area classification : Shut-off head max. allowable : * m. liq.

12 * to be stated by vendor Minimum continuous flow : * m³/h

13 Manufacturer (MFR) : * Nozzles Nom. diameter Rating Type/Fac. Pos.

14 Type : Centrifugal Suction * END

15 Model : * Discharge * TOP

16 Location : Indoor Vent * *

17 Arrangement : horizontal Drain * *

18 Rotation facing coupling : * cw/ccw Cooling * *

19 Suction : single Flushing * *

20 Number of stages : 1

21 Self priming : no Hydraulic power at rated capacity : 0.2 kW

22 Design pressure : * bara Hydraulic efficiency at normal capacity : * %

23 Design temperature : * °C Power required : * kW

24 Max. allow. operating pressure : * barg Power installed : * kW

25 Casing split : radial Pump speed : * rpm

26 Impeller type : * Driver speed : * rpm

27 Impeller diameter supplied : * mm Pump drive : *

28 Impeller diameter min. : * mm ; max : * mm Driver type : Direct

29 Driver supply : *

30 Bearings : axial ; type: * Weight pump : * kg

31 Bearings : radial ; type: * Weight base plate : - kg

32 Bearings : intermittent ; type: * Weight driver : * kg

33 Bearing lubrication : Food Grade Lubricant Shipping weight : * kg

34 Common base plate Required : *

35 for pump and driver By MFR : * Test Required Witnessed

36 Coupling : yes ; type : * Performance yes no

37 Coupling guard : yes ; type : * Hydrostatic yes no

38 Foundation bolts : yes ; by MFR: yes NPSH yes no

39 Slide rails : yes/no Single

40 MFR : * ;type : Single

41 Smothering gland : yes Flushing liquid : *

42 Shipment of seal/packing : separate Flushing liquid flow rate : * m³/h

43 Casing/bearing/seals/none/ Flushing liquid design pressure : * barg

44 Cooling/Heating Medium : - Flushing system acc. API-610 plan no. : -

45 Consumption : - kg/h Auxiliary piping by pump MFR : no

46 Design pressure :: - barg Seal/packing by pump MFR : yes

47 Stuffing box: number of rings :

48 Casing and cover : SS316L Packing : *

49 Casing wearring : SS316L Gland : *

50 Impeller : * (Note 3) Gaskets : *

51 Impeller wearring : * (Note 3) O-ring : *

52 Shaft : * Lantern ring : *

53 Shaft sleeve : * (Note 3) Throat bushing : *

54 Coupling guard : * (Note 3) Mechanical seal : *

55 Base plate : - Auxiliary piping : -

rev. Client: PT. UNILEVER INDONESIA TBK, Project: SILIWANGI 1 rev.

Client's Project No.: 13021 Plant Location: SILIWANGI 00

Description/Issued for Ckd Approved

RNA

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 1 of: 2

LG

Me

ch

an

ica

l se

al d

ata

Ma

teri

al

Rev. Date By

A 2/7/2014 IDC RK

* *

* *

* *

Pro

ce

ss a

nd

op

era

tin

g d

ata

Me

ch

an

ica

l d

ata

* *

* *

* *

Spec./Data sheet for: CENTRIFUGAL PUMP

Cost Acc. Code: * Item no.: PU-2421

1

2

3 Motors / Turbine - : Motor

4 Power Supply V / Phase / Hz : 400 / 3 / 50

5 Transmission - : Direct Drive

6 Cooling Type - : *

7 Motive fluid - : *

8 Frame size - : *

9 Model - : *

10 Manufacture - : *

11 Rating - : *

12 NOL Power : *

13 Hazardous Area Classification - : Safe / Non Hazardus / Non Flammable

14 Surface finish & wetted Parts Micron : 0.8

15 Net weight - Pump. Base & Motor Kg : *

16 Max. Maintence Weight Kg : *

17 Noise Level dBA : <80

18

19

20

21 Notes:

22 1 * To be provided by vendor

23 2 Pump differential pressure should be reviewed and shall be confirmed after Plot Plan/ Equipment layout

24 3 MOC of all wetted part shall be of SS 316L

25 4 Pump Shall be hot water jackated Design with temperature of 80 °C , Jacket MOC- SS304L

26 Hot water jacket Design conditions: Design Press-6 barg, Design Temperature- 100 °C

27 5 Supplier to confirm insulation requirement , type & thickness

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

rev. 43

Client: PT. UNILEVER INDONESIA TBK,

Client's Project No.: 13021

Project:SILIWANGI 1

Plant Location:SILIWANGI

Office: Indonesia Tebodin order: Document: Rev.: 00 Sheet: 2 of:

Re

ma

rks

Description

Dri

ve

rs &

Tra

nsm

issio

n

2

Description