ceosff - decopavement€¦ · test method astm d-4541standard test method for pull-off strength of...
TRANSCRIPT
ceoSffEngineers
Certificate of Analysis
Adhesion to Asphalt
This certificate confirms that the above product was tested as per stated standardspecification using calibrated equipment and qualified staff. The following test resultswere obtained.
Test Results
Consuitirag Engineers
and Geosaientists
GeoEngineers - Gifford, lnc.
GeoEngineers, Inc.
523 East 2nd Ar,'enue
Spokane, WA !!202
Telephone (5 09) 363-3125
Far (509) 3633126
Piinted on recycled paper.
Product Name Streetbond SP-150Batch Number ResinA: #93937, Colorant: Brick #93461: CatalvstB: #93938Manufacture Date 2107lazSamole Preo Date 3108102Testing Date(s) 3t15t02Test Method ASTM D-4541Standard Test Method for Pull-Off Strength of Coatings
Using Portable Adhesion TestersTest Conditions As per ASTM standard. Any deviation reported at end of certificate.
3/8" Unpolished-Asphalt 1 , 4 3 2083/8" Polished-Asohalt 1 . 1 5 167
3i4" Unpolished-Asphalt 1 . 8 3 . zoo3/4" Polished-Asphalt 2 .50 342
* Combination Asphalt Cohesive / Coatino Adhesive**Asohalt Cohesive
cured at 23"C.122% RH for one weekasohalt surface is the untouched surface of the rli
Polished asphalt surface is the cut surface and is intended to simulate aged asphalt.Utilized Positest Portable Pull-Off Adhesion Tester (Type ll) device and aluminum dolliesResults are the a of three trials.