ceralog product catalog 2018 - camlog · abrasive treatment of the zirconia is necessary during...

Valid from 2018

PRODUCT CATALOG CERALOG® IMPLANT SYSTEM

CERALOG® Product Catalog 2018 | 1

SYSTEM INFORMATION

The CERALOG® Implant System 2

SURGERY

Planning 9

Implants 13

CERALOG® Surgery Set 15

Surgical instruments 16

Healing caps 21

PROSTHETICS

Impression taking 23

Temporary abutments 24

Abutments PEKK 24

CAD/CAM prosthetics 25

Accessories for abutments and healing caps 26

Prosthetic instruments 26

Selection abutments 27

INDEX

Alphabetical 28

Article numbers 29

2 | CERALOG® Product Catalog 2018 CERALOG® Product Catalog 2018 | 3

CERALOG® IMPLANT SYSTEM

DUAL SURFACEThe dual surface texture of CERALOG® is unique for achieving optimum soft tissue adaptation and the right level of roughness for optimized osseointegration. This is possible because of the high-tech manufacturing process of Ceramic Injection Molding (CIM).

INNOVATIVE ABUTMENTThe innovative PEKK high performance polymer abut-ment is ductile and offers an excellent biological seal.In addition, it has damping properties and reduces the stress concentration on the implant.

REVERSIBLEWith the CERALOG® Hexalobe implant, retrievable prosthetics solutions are possible – cemented or screw-retained crowns.

The demand for highly esthetic natural prosthetics increases everyday. The trend favors ceramic implant solutions with the highest level of biocompatibility. The high soft tissue com-patibility of zirconia is generally recognized. The CERALOG® Implant System is a mature system and has been in clinical use for years. The implants offer a high level of predictability and provide exceptional esthetic properties.

In 2006, the Swiss company AXIS biodental SA already began the research for the development of high performance zirco-nia implants in conjunction with Ceramic Injection Molding (CIM).

The fi rst clinical studies were conducted in 2007 and already used the current material composition and surface texture.Commercialisation began with the single piece Monobloc implant. The two-piece Hexalobe implant has been used successfully in the present confi guration since early 2013.

Ceramic implants will establish themselves on the implant market, not only for medical reasons, but above all for highly esthetic aspects. Osseointegration is predictable due to high-tech manufacturing processes and innovative surface textures.

ESTHETICSThe ivory color, which is close to the

natural tooth color, and the properties of zirconia support high esthetic results.

IDEAL CONNECTIONHexalobe – the ideal implant-abutment connection for ceramic implants. The torque is transmitted tangentially to the implant which allows a much higher torque compared to hexagonal connections, and also more rotational stability.


0 500 1000 1500 2000

Compressive Strength (MPa)

Tensile Strength (MPa)

Shear Strength (MPa)

Young‘s Modulus (GPa) Titanium grade 4Zirconia (Y-TZP HIP)

THE MATERIAL Y-TZP HIP ZIRCONIACERALOG® implants consist of ultra-pure yttrium stabilized tetragonal zirconia. They are manufactured by Ceramic Injection Molding (CIM), whereby both the outer geometry as well as the surface texture are already created in a mold before the sintering and HIP process. No abrasive treatment of the zirconia is necessary during this process. Only few companies worldwide are capable of managing this high-tech manufacturing process.

100% quality control: every single implant is tested optically, dimensio-nally and with appropriate mechanical loading in a controlled method.

DIFFERENT MECHANICAL PROPERTIES OF ZIRCONIA AND TITANIUM

CERALOG® HEXALOBE AND CERALOG® MONOBLOCFrom the implant to the crown: perfect natural esthetics, like a natural tooth. Options for treatment planning include the transgingival healing of the CERALOG® Monobloc implant and fl exible trans- or subgingival healing two-piece CERALOG® Hexalobe implant. The CERALOG® implant system is simple to use, thanks to the screw-retained abutment and the clearly structured surgical procedure. The ivory color, which is very close to a natural tooth, and the properties of zirconia support high esthetic results.

The implants are available in three lengths (8, 10 and 12 mm) and in one diameter (4 mm).

IMPLANT DIAMETER

IMPLANT LENGTHS

8 mm 10 mm 12 mm

HEXALOBE

MONOBLOC

4.0 mm

ADVANTAGES AND BENEFITS – IMPLANT-ABUTMENT-CONNECTION

• High level of user safety thanks to the connection design• High positioning precision due to minimal rotational freedom• No transfer key for abutments required• Ceramic-compatible force transfer when inserting the CERALOG® Hexalobe implant

THE DUAL SURFACE TEXTUREThe unique dual surface texture of CERALOG® combines two defi ned rough-nesses on a single implant, without the need for post-processing.

The endosseal area of the implant body has a micro-roughness with a Ra value of 1.6 μmto enable targeted deposition of bone cells. The neck area of the implant has a lower degree of roughness with a Ra value of 0.5 μm, which additionally optimizes the deposition of soft tissue.

Ra 1.6 µm

THE HEXALOBE IMPLANT-ABUTMENT-CONNECTIONEsthetics, quality of life and patient satisfaction are largely based on prosthetic elements. The perfect implant-abutment connection is of signifi cant relevance for the long-term, stable success of the restoration. The CERALOG® Hexalobe connection has been designed and perfected specifi cally for ceramic implants. Forces are transferred tangentially, enabling a higher transfer of force and high rotational stability.

Crown

Abutment

Abutment screw

Upper thread

Inner thread

Implant

Ra 0.5 µm

Internal structure of zirconia implant (picture: MEB, magnifying 6000x)


CERALOG® ABUTMENT

The CERALOG® Implant System offers straight and angled abutments made of the high performance polyether ketone ketone (PEKK). The abutments are attached to the implant either via a titanium or gold screw. PEKK has a light color and is easy to process with conventional milling equipment.

made of the high performance polyether ketone ketone (PEKK). The abutments are attached to the implant either via a titanium or gold screw. PEKK has a light color and is easy to process with conventional milling equipment.

THE PEKK HIGH PERFORMANCE POLYMER

PEKK belongs to the polyaryl ether ketone (PAEK) family. These are high performance thermoplastics, which are required and used for extreme conditions, for example, in automotive engineering, the aerospace industry as well as medical engineering. Due to their chemical structure they offer excellent tensile strength, rigidity and hydrolysis resistance. In addition to its long-standing use in orthopedics, PEKK also covers a broad spectrum of indications in dentistry. For example, in restorations where stress shielding has to be reduced. The ductility of PEKK reduces the stress on the implant.

BIOCOMPATIBILITY AND STERILIZATION OF PEKK

The biocompatibility of PEKK implant material has been established by Oxford Performance Materials Inc. for long-term use according to the ISO 10993-1 standard. In an earlier study, it was demonstrated that PEKK particles are relatively free of irritation when compared to well known polymer implant materials such as PMMA or polyethylene. PEKK can also be steam sterilized.

PEEK VS. PEKK

The more familiar high performance polymer polyether ether ketone (PEEK) has been used in dental medicine dentistry for many years for temporary restorations, for scanning posts and for standard impression posts. This also belongs to the PAEK group of polymers (poly aryl ether keto-ne). The synthesis of PEKK was started in 1962 by the DuPont chemicals group, which since then has refi ned polymerization over the following decades.

The later PEKK synthesis was adapted by Oxford Performance Materials and Arkema, who initiated market introduction of the material into numerous industry segments. The major advantage of PEKK over PEEK is the higher creep resistance and its contour retention under stress loading.

CERALOG® COMPONENTS FOR SOFT TISSUE MANAGEMENT

The CERALOG® Hexalobe implant set includes a cover cap which can be placed in the Hexalobe connection during the healing time. The implant can also be covered with a cover screw (available separately). With both options, the implant can heal either in a transgingival or submerged method. Healing caps in two heights and two diameters as well as a temporary abutment are available for soft tissue shaping. These components are made of PEEK and they are designed for limited use.

CERALOG® IMPLANT IMPRESSION TAKINGWith the use of a transfer cap or impression post, impressions of CERALOG® Hexalobe implants can be taken both closed as well as open. Impressions of the CERALOG® Monobloc implants are taken via the pick-up method with a transfer cap. The impression components are made of the high performance polymer PEEK.

Type A

Cam alignment

against angulation

Type A

Type B

Cam alignment in the

direction of angulation

Type B

Cams with 30° offset

30˚

shaping. These components are made of PEEK and they are designed for limited use.

either in a transgingival or submerged method. Healing caps in two heights and two diameters as well as a temporary abutment are available for soft tissue shaping. These components are made of PEEK and they are designed for limited use. shaping. These components are made of PEEK and they are designed for limited use.

PEKK PEEK

Young‘s modulus (GPa) 4.5 4.1

Tensile strength (MPa) 138 100

Flexural strength (MPa) 193 165

Compressive strength (MPa) 207 135

Elongation at break (%) > 30 40

Melting temperature (˚C) 360 340

Water absorption after 24 hrs. (%) < 0.2 0.5

Density (g/cm3) 1.3 1.3


ø 4.0

9.5

- 11.

5 - 1

3.5

8 - 1

0 -1

2

ø 4.0

ø 4.8

ø 4.5

1

9.5

- 11.

5 - 1

3.5

7.4

5.0

8 - 1

0 -1

2

PLANNING – X-RAY PLANNING FOILS

CERALOG® SURGERY

The CERALOG® Hexalobe and CERALOG® Monobloc implants were developed for transgingival healing. The 1.5 mm high region of the implant neck is posi-tioned supracrestally during insertion. The Hexalobe implant can also be placed epicrestally by using the bone profile drill and deepening of the implant bed.

Healing can be both submerged as well as transgin-gival. The surgical set contains all the components necessary for the insertion of the implants.

NoteDimensions are given in millimeters (mm).

CERALOG® HEXALOBE IMPLANT with mounted PEKK abutment

CERALOG® MONOBLOC IMPLANT

Artikel Art.-Nr.

X-RAY PLANNING FOIL

CERALOG® Hexalobe Implant CERALOG® Hexalobe and Monobloc Implant EPICRESTAL protocol SUPRACRESTAL protocol

HEADQUARTERSCAMLOG Biotechnologies AG | Margarethenstr. 38 | 4053 Basel | Switzerland

MANUFACTURER Axis biodental SA | Les Rosées 5 | 2336 Les Bois | Switzerland

ACTUAL SIZE

1 : 1

25% MAGNIFICATION

1.25 : 1

40% MAGNIFICATION

1.4 : 1

I125

9 Re

v. 0

09/

2017

0 10 20 30 mm

0 10 20 30

0 10 20 30 mm

mm

16 mm

10 mm8 mm

12 mm14 mm

16 mm

10 mm8 mm

12 mm14 mm

16 mm

10 mm8 mm

12 mm14 mm

1.0 mm

Apical drill excess length

14 mm12 mm10 mm8 mm

14 mm12 mm10 mm8 mm Ø 4.0 mm

Ø 4.5 mm

Ø 4.0 mm

Ø 4.5 mm

Ø 4.0 mm

Ø 4.5 mm

1.75 mm

Apical drill excess length

CERALOG® X-Ray planning foilfor CERALOG® Hexalobe andMonobloc implants, for theepicrestal and supracrestal surgical protocol

I1259 -

10 | CERALOG® Product Catalog 2018

EXPLANATION OF SYMBOLS EXPLANATION OF ABBREVIATIONS

GENERAL SAFETY INSTRUCTIONS AND WARNINGSThe descriptions in this product catalog are not suffi cient to allow immediate use of the CERALOG® Implant System. Instruction by a surgeon experienced in using the CERALOG® Implant System is strongly recommended.

CE-label

Sterilized using irradiation

Non-sterile

Caution, observe the warning notices

Use-by date

Do not re-use

Article number

Lot number

Manufacturer

Protect against sun light

Maximum speed (clockwise or anti-clockwise)

Maximum torque (only clockwise)

Consult instructions for use

Do not use if package is damaged

Do not resterilize

Sterilizable up to 134° C

Diameter

Enossal diameter

Gingival diameter

Prosthetic platform diameter

Length

Gingival height

Poly ether ether ketone

Poly ether ketone ketone

SECONDARY PACKAGINGSealed, folding box with product label

INNER IMPLANT PACKAGING (PRIMARY PACKAGING)Sealed

EXAMPLE OF PRODUCT LABEL FOR EXTERIOR IMPLANT PACKAGING

Length

Implant name

Diameter

HIBC datamatrix

Use-by date

CE-label

Article number

Lot number


CHIR

URG

IE


Article Type Art. No. L1 E

CERALOG® Monobloc implantsterile

MaterialZirconia (Y-TZP HIP)

M8 A1074

4.5 mm

8 mm

4.0 mmM10 A1075 10 mm

M12 A1076 12 mm

Article Type Art. No. L1 E

CERALOG® Hexalobe implantincl. cover cap, sterile

MaterialZirconia (Y-TZP HIP)

M8 A1078

4.5 mm

8 mm

4.0 mmM10 A1079 10 mm

M12 A1080 12 mm

CERALOG® HEXALOBE – IMPLANTS

L1 8

-10

- 12

CERALOG® MONOBLOC – IMPLANTS

E

E

L2 9

.5 -

11.5

- 13

.5

L1 8

-10

- 12

L2 9

.5 -

11.5

- 13

.5


THIS DESIGN IS THE PROPER T Y OF THE IPPI SRL. IT IS PROHIBITED TO COPY OR REPRODUCE UNAUTHORIZED OF THIS DOCUMENT OR ANY PAR T THEREOF, ALL RIGHTS ARE RESER VED.

QU

ESTO

DIS

EGN

O È

DI

PR

OP

RIE

TÀ D

ELLA

IP

PI

SRL.

THIS D

ESIGN

IS THE P

RO

PER

TY

OF TH

E IPP

I SRL. IT IS P

RO

HIB

ITED TO

CO

PY

OR

REP

RO

DU

CE U

NA

UTH

OR

IZED

OF TH

IS DO

CU

MEN

T OR

AN

Y PA

RT TH

EREO

F, ALL R

IGH

TS AR

E RESER

VED

.

L_702_548_00_00 1/1

Ponzilacqua NicoDATA : 01/02/2017

Parte 01 Vassoio: RADEL R 5000100NT15 BIANCO Parte 02 Fondo: RADEL R 5000100NT15 BIANCO

Parte 03 Coperchio: RADEL R 5000CL301

01

Layout di stampa olvNUMERO DI DISEGNO / DRAWING NUMBER FOGLI / SHEETS SCALA / SCALE

1:1FORMATO / SIZE

A2

DESCRIZIONE / DESCRIPTION REDATTO DA / EDITED BY

MATERIALE / MATERIAL MASTER

MODIFICHE / MODIFICATIONS

REV

REVISIONI /REVISION

DATA REVISIONI /DATE REVISION

TOLLERANZE GENERALI / GENERAL TOLLERANCE

!"#$%"$&&'()$*$+$$$$$$$#,-$&'()$*$+!"#$%"$&&'()$*$.$$$$$$$#,-$&'()$*$.

APPROVATO DA / APPROVED BY

rma / signature

IPPI SRLvia Brodolini 22, 24, 26

Loc. Crespellano40053 Valsamoggia (BO)

tel. +39 051969510fax +39 0516720648p. iva 00305440372MAIL: [email protected]

01 CAMBIATA DICITURA SU LASER VASSOIO 17/11/2016

BOZZA DRAFT

COLORE DELLE PARTI IN SILICONE / SILICON PARTS COLORS

AZZURRO/LIGHT BLUE : PANTONE 290

BIANCO/WHITE : RAL 9010

BLU/BLUE : RAL 5015

GIALLO/YELLOW : RAL1016

GRIGIO/GREY : RAL7040

MARRONE/BROWN : RAL8024

ROSSO/RED : RAL3020

VERDE/GREEN : RAL6032

ARANCIONE/ORANGE : RAL2003

VIOLA/PURPLE : PANTONE 265

NERO/BLACK

A A

A

A A

A A

A A

A A

A

A A

A

A A

Round burØ 1.4

Pilot drillØ 2.4

Gauge Drill SØ 2.9

Drill MØ 3.4

Depthgauge M

Tap M

Pro le drill

Wrench adapter C1030

B1212

B1013B1022 B1014 B1015

B1024

B1082

Torque wrench C1031

B1170

Cover cap extractor

C1174

Hexalobeimplant holder

B1021

Extension

C1029

Screwdriver

C1156Hexalobe

implant holder

B1021

Monoblocimplant holder

B1108

Monoblocimplant holder

B1108

BIANCO/WHITE

B1082B1024

C1030

C1031

B1015B1014B1022B1013B1212

C1156 B1108

C1174B1170

C1029

B1021

CERALOG® – SURGERY SET

Article Art. No.

CERALOG® Surgery setcontains all the necessary surgical instruments, incl. torque wrench

B1085

CERALOG® Surgery traywithout content

F1168

CERALOG® – SURGERY SET


CERALOG® – SURGICAL INSTRUMENTS

Article Art. No. L

Bone profi le drillresterilizable

Materialstainless steel

B1170 4.5 mm 26.5 mm

Tap Mresterilizable


B1082 4.0 mm 31 mm

Article Art. No. L

Round burresterilizable


B1212 1.4 mm 34 mm

Point drillresterilizable


B1012 1.5 mm 30 mm

Pilot drillresterilizable


B1013 2.4 mm 34 mm

Form drill S, Mresterilizable


B1014 2.9 mm

34 mm

B1015 3.4 mm


GENERAL SURGICAL INSTRUMENTS

Article Art. No. Dimension

Handpiece extensionresterilizable


C1029 4.5 mm 26 mm

Tissue punchresterilizable


B10104.0 mm (int)5.0 mm (ext)

23 mm

Direction gaugeresterilizable


B1022 2.4 mm 20 mm

Depth gauge Mresterilizable


B1024 3.4 mm 27 mm


Hexalobe implant holderresterilizable


B1021 - 27 mm

Monobloc implant holderresterilizable

MaterialPEEK, stainless steel

B1108 - 25 mm

Cover cap extractorresterilizable


C1174 - 24 mm


GENERAL SURGICAL INSTRUMENTS


Torque wrenchresterilizable


C1031 - 86 mm

Wrench adapterresterilizable


C1030 - 11 mm

RA Screwdriver ISO shaftresterilizable


C1156 - 25 mm

Article Art. No. GH

Healing capssupplied without screw

MaterialPEEK

D1048 4.5 mm 2.5 mm

D1132 5.0 mm 4.0 mm

HEALING CAPS

GH

0.5 mm

ADDITIONAL SURGICAL ARTICLES


Cover cap

MaterialPEEK

D1171 4.5 mm 0.5 mm

Cover screw

MaterialPEEK/titanium alloy

D1153 4.5 mm 0.8 mm0.8 mm

Note: All additional surgical articles and healing caps are supplied non-sterile.


Article Art. No.

Hexalobe open tray transferincl. fi xing screw

MaterialPEEK, titanium alloy

D1152 5.0 mm

Hexalobe closed tray transfer capfor supracrestally placed implants

MaterialPEEK

D1040 5.0 mm

Hexalobe implant analog

MaterialPEEK

D1042 -

Monobloc closed tray transfer cap

MaterialPEEK

D1036 5.0 mm

Monobloc implant analog


D1037 -

IMPRESSION TAKING

6 mm

12 mm

17.5 mm

17 mm

6 mm

22 | CERALOG® Product Catalog 2018


TEMPORARY ABUTMENT

Article Art. No. GH

Temporary abutment supplied without screw

MaterialPEEK

D1131 4.8 mm -7.5 mm

ABUTMENTS PEKK

Article Art. No. GH

PEKK abutment, straight supplied without screw

MaterialPEKK

D1154 4.8 mm -

PEKK abutment,15° angled, type A supplied without screw

MaterialPEKK

D1155 4.8 mm -

PEKK abutment,15° angled, type B supplied without screw

MaterialPEKK

D1157 4.8 mm -

8 mm

8 mm

8 mm

Note: All abutments are supplied non-sterile.

Article Art. No.

CERALOG® Scanbody incl. abutment screw

MaterialPEEK, titanium alloy

D1254 4.5 mm

CAD/CAM PROSTHETICS

8 mm

Note: All scanbodies are supplied non-sterile. Not available in all countries.


PROSTHETIC INSTRUMENTS

ACCESSORIES FOR ABUTMENTS AND HEALING CAPS

Note: All screws are supplied non-sterile.

SELECTION ABUTMENTS

Article Art. No. GH

Selection abutment, straight

MaterialPOM

D1158 4.5 mm -

Selection abutment, 15° angled, type A

MaterialPOM

D1159 4.5 mm -

Selection abutment, 15° angled, type B

MaterialPOM

D1160 4.5 mm -

8 mm

8 mm

8 mm

Article Art. No. Gewinde

Titanium prosthetic screw for the definitive screwing of abutments into the implant

Materialtitanium alloy

D1149 - M1.6

Gold prosthetic screw for the definitive screwing of abutments into the implant

MaterialHolisticor™

D1165 - M1.6

Laboratory screw for fixation on the working model, green anodized

Materialtitanium alloy

D1162 - M1.6

7.3 mm

7.3 mm

7.3 mm

Article Art. No. L

Laboratory screwdriver


C1028 22 mm

CERALOG® – PROSTHETIC PLANNING SET

Article Art. No.

CERALOG®

Prosthetic planning setincl. laboratory screw, lab screwdriver selection abutment straight,selection abutment 15° angled, type A and type B

D1161


BBone profile drill 17

CCover cap 21

Cover cap extractor 19

Cover screw 21

DDepth gauge M 18

Direction gauge 18

FForm drill S, M 16

GGold prosthetic screw 26

HHandpiece extension 18

Healing caps 21

Hexalobe closed tray transfer cap 23

Hexalobe open tray transfer 23

Hexalobe implant holder 19

Hexalobe implant 13

Hexalobe implant analog 23

LLaboratory screw 26

Laboratory screwdriver 26

MMonobloc closed tray, transfer cap 23

Monobloc implant holder 19

Monobloc implant 13

Monobloc implant analog 23

PPEKK abutment, 15° angled, type A 24

PEKK abutment, 15° angled, type B 24

PEKK abutment, straight 24

Pilot drill 16

Point drill 16

Prosthetic planning set 27

RRA screwdriver, ISO-Shaft 20

Round bur 16

SScanbody 25

Selection abutment, 15° angled, type A 27

Selection abutment, 15° angled, type B 27

Selection abutment, straight 27

Surgery set 15

Surgery tray 15

TTap M 17

Temporary abutment 24

Tissue punch 18

Titanium prosthetic screw 26

Torque wrench 20

XX-Ray planning foil for CERALOG® Hexalobe and Monobloc implants, for theepicrestal and supracrestal surgical protocol 9

WWrench adapter 20

INDEX – ALPHABETICAL INDEX – ARTICLE NUMBER

D1131 Temporary abutment 24

D1132 Healing cap, GH 4.0 mm 21

D1149 Titanium prosthetic screw 26

D1152 Hexalobe open tray transfer 23

D1153 Cover screw 21

PEKK abutment D1154 straight 24D1155 15° angled, type A 24 D1157 15° angled, type B 24

Selection abutment D1158 straight 25D1159 15° angled, type A 25 D1160 15° angled, type B 25

D1161 Prosthetic planning set 25

D1162 Laboratory screw 26

D1165 Gold prosthetic screw 26

D1171 Cover cap 21

D1254 Scanbody 26

F1168 Surgery tray (without content) 15

I1259 X-Ray planning foil for CERALOG® Hexalobe and Monobloc implants, for the epicrestal and supracrestal surgical protocol 9

Monobloc implant A1074 M8, Ø 4.5 mm, L 8 mm 13A1075 M10, Ø 4.5 mm, L 10 mm 13A1076 M12, Ø 4.5 mm, L 12 mm 13

Hexalobe implantA1078 M8, Ø 4.5 mm, L 8 mm 13A1079 M10, Ø 4.5 mm, L 10 mm 13A1080 M12, Ø 4.5 mm, L 12 mm 13

B1010 Tissue punch 18

B1012 Point drill 16

B1013 Pilot drill 16

Form drillB1014 S, Ø 2.9 mm, L 34 mm 17B1015 M, Ø 3.4 mm, L 34 mm 17

B1021 Hexalobe implant holder 19

B1022 Direction gauge 18

B1024 Depth gauge M 18

B1082 Tap M 17

B1085 Surgery set 15

B1108 Monobloc implant holder 19

B1170 Bone profile drill 16

B1212 Round bur 16

C1028 Laboratory screwdriver 27

C1029 Handpiece extension 18

C1030 Wrench adapter 20

C1031 Torque wrench 20

C1156 RA Screwdriver ISO shaft 20

C1174 Cover cap extractor 19

D1036 Monobloc closed tray 23 transfer cap

D1037 Monobloc implant analog 23

D1040 Hexalobe closed tray 23 transfer cap

D1042 Hexalobe implant analog 23

D1048 Healing cap, GH 2.5 mm 21

FURTHER INFORMATION ON THE CERALOG® PRODUCTS CAN BE FOUND IN THE FOLLOWING DOCUMENTATION:

• CERALOG® Instructions for use• CERALOG® Working instructions

The documents are available from the local CAMLOG representative.

See also: www.camlog.com

TRADE NAMES AND COPYRIGHTProtected trade names (trademarks) are not specially indicated. The absence of such indication does not mean that it is not a trademarked name. The publication including all its parts is protected by copyright. Any exploitation beyond the narrow limits of the copyright act is not permissible without the approval of CAMLOG Biotechnologies AG and is subject to legal sanctions.

FURTHERDOCUMENTATION

ceralog product catalog 2018 - camlog · abrasive treatment of the zirconia is necessary during...

Documents