ceramic fiber blanket - calvo sealing...ceramic fiber blanket icp mc1600 icp mc1600 blankets are...
TRANSCRIPT
Ceramic Fiber Blanket
ICP MC1600
ICP MC1600 blankets are high temperature, lighweight, needled blankets manufactured from polycrystalline mullite fibre that can ex-posed to temperatures up to 1600 ºC. ICp MC1600 blankets are completely inorganic and so retain their strength, flexibility and thermal properties in many working environ-ments, without the generation of smoke or fu-mes. Available in a range of density and thic-kness combinations, ICP MC1600 blankets can be used in a wide variety of applications. They are especially suited to environments where the presence of “shot” (unfiberised par-ticles) is undesirable or where resistance to corrosive agents is essential.
DESCRIPTION
CHARACTERISTICS
• High temperature stability• Low thermal conductivity and heat storage• High tensile strength & resilience• Resistance to thermal shock & chemical
attack• Excellent flexibility
Page 1Rev. 03/12/2012
S.L.
S.L.
APPLICATION
METALLURGY
• High temperature heat treatment furnaces
CERAMIC
• Porcelain kilns
SPECIAL APPLICATIONS
• Incineration
Page 2Rev. 03/12/2012
Average Values(wt % )
PRODUCT PARAMETERS
Physical Properties
Chemical Analysis
Galileo, 8 - P. I. Can Estella - 08635 St. Esteve Sesrovires (Barcelona) SPAINTel. +34 937 715 910 - Fax +34 937 715 [email protected] / www.calvosealing.com
AVAILABILITY
Thermal Conductivity (W/m.K)
This properties indicated in this brochure are typical values obtained in serial testing and determined by acknowledged test methods. The information provided in this brochure does not represent guaranteed properties and cannot be used for any warranty claims.
The technical data of the product may be changed without prior notice. Calvo Sealing reserves the right to make alterations of the technical data and the ma-terials herein without prior notice in order to keep up with engineering progress and new developments.
Ceramic Fiber Blanket
S.L.
S.L.
Permanent Linear Shrinkage (%)
24 hour soak at 1500 ºC 0,7
* Classification Temperature is not a definition of the operational limit of these products, especially when long term physical or dimensional stability is a factor. For certain applications continuous use tempera-ture limits may be significantly reduced.
Thickness(mm) Density (Kg/m3) Roll length
(m)
100 130
13* 7,20
25 7,20
Standard roll width is 610 mm. Other thicknesses/sizes may be avai-lable on request subject to minimum order requirements.
* 2 rolls per box.
Tª 100 130
600ºC 0,15 0,13
800ºC 0,20 0,18
1000ºC 0,29 0,25
1200ºC 0,42 0,36
Classification Temperature* 1600 ºC
Colour White
Density (Kg/m3) 100 / 130
Fiber Diameter (μm) 4,0 - 6,0
Al2O3 ≥ 72
Al2O3 + SiO2 ≥ 99