certificate of compliance - abb group · 2018. 5. 9. · certificate of compliance certificate...

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20161114-E60645Report Reference E60645-20160629

Issue Date 2016-NOVEMBER-14

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

of 4

Issued to: ABB FRANCE

Activite Raccordement3 Rue Jean PerrinCS9000969687 Chassieu Cedex FRANCE

This is to certify that

representative samples of

Terminal Blocks - Component

(See following pages for additional model information.)

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: ANSI/UL 1059, "Terminal Blocks."Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark:

, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC.

Look for the UL Certification Mark on the product.





UL LLC


of 4

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.

Additional Information:

PRODUCT COVERED:

USR Recognized Component –Screw type, SNA Compact series terminal blocks: Model No(s): C2.5/5, C2.5/5.P, C2.5/6, C2.5/6.P, C4/6, C4/6.P, C4/6.4A, C6/8, C6/8.P, C10/10, C10/10.P, C16/12, C16/12.P, C35/16, C4/6.S, C4/6.SF, C4/6.SFD24, C4/6.SFD250, C6/8.ST1 and C6/8.ST1.IP20 followed by BL, OR, YL, GN, RD, PR, BR, WH, BK or blank.

Ratings:

Application -

Commercial appliances (such as business and EDP equipment, etc.)

General industrial (such as motor controllers, pushbutton stations, Etc).

Industrial control devices having limited ratings (see note A under Ratings).

Terminal Type -

Front Back

Pressure Wire Connector Pressure Wire Connector

Type Wiring - Factory and Field wiring.





UL LLC


of 4

Cat. No.Wire Range AWG/kcmil

Wire Type, Cu (1)

FW

Torque [N·m]

Current A

Voltage V

UG (4)

CA

C2.5/5 24-12 AWG SOL/STR 20.4-0.

620 600

B,C,D

2(105),4

C2.5/5.P 24-12 AWG SOL/STR 2 0.4-0.6 N/A N/A B,C 2(105),4

C2.5/6 24-10 AWG SOL/STR 2 0.4-0.6 25 600 B,C,D

2(105),4

C2.5/6.P 24-10 AWG SOL/STR 2 0.4-0.6 N/A N/A B,C 2(105),4

C4/6 24-10 AWG SOL/STR 2 0.5-0.6 30 600B,C,

D2(105),4

C4/6.4A 24-10 AWG SOL/STR 2 0.5-0.6 30 600B,C,

D2(105),4

C4/6.P 24-10 AWG SOL/STR 2 0.5-0.6 N/A N/A B,C 2(105),4

C6/8 20-8 AWG SOL/STR 2 0.8-1.0 45 600B,C,

D2(105),4


C10/10 20-6 AWG SOL/STR 2 1.2-1.4 59 600B,C,

D2(105),4


C16/12 20-4 AWG SOL/STR 2 1.2-1.4 80 600B,C,

D2(105),4


C35/16 10-1/0 AWG SOL/STR 2 2.5-3.0 134 600B,C,

D 2(105),4

C4/6.S 24-10 AWG SOL/STR 2 0.5-0.6 25300 B,C

2(105),4600 D

C4/6.SF 24-10 AWG SOL/STR 2 0.5-0.6 16300 B,C

2(105),4600 D

C4/6.SFD24 24-10 AWG SOL/STR 2 0.5-0.6 16300 (3) B,C

2(105),4600 D

C4/6.SFD250 24-10 AWG SOL/STR 2 0.5-0.6 16300 (3) B,C

2(105),4600 D

C6/8.ST1 20-8 AWG SOL/STR 20.8-1.0

(2) 37300 B,C

2(105),4600 D

C6/8.ST1.IP20 20-8 AWG SOL/STR 20.8-1.0

(2)37

300 B,C2(105),4

600 D





UL LLC


of 4

Note 1 - max SOL wire is 10AWG.

Note 2 –Torque value for screw of disconnecting bar of Model No(s): C6/8.ST1 and C6/8.ST1.IP20 is 0.4-0.6Nm.

Note 3. Model No. C4/6.SFD24 will be used under 24V maximum because electronic element is 24V rated and Model No. C4/6.SFD250 will be used under 250V maximum because electronic element is 250V rated.

Note 4 –UG D - These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on any single circuit of the terminal block does not exceed 15 A at 51-150 V, 10 A at 151-300 V, or 5 A at 301-600 V, or the maximum ampere rating, whichever is less.

certificate of compliance - abb group · 2018. 5. 9. · certificate of compliance certificate...

Documents