certificates for compliance

7/28/2019 Certificates for Compliance

1/5


2/5

Roof Cladding, Gutters, and Downpipes Certificate

Description

ROOF CLADDING AND DOWNPIPES CERTIFICATION FORM

FOR APPLICANTS/PRINCIPAL CONTRACTORS/LICENSED ROOFERS

Construction or Complying Development Certificate Number:-

________/______

I.........................................................................................................................Of ......................................................................................................................

Being the builder/principal contractor/licensed roofer;

my builders license number being

I hereby certify that:the roof cladding has been installed, fixed and flashed in accordance with Part3.5.1 Roof cladding of the Building Code of Australia Housing provisionsrelevant Australian Standards and the relevant conditions of DevelopmentConsent and,the guttering and downpipes have been installed in accordance Part 3.5.2 ofthe Building Code of Australia Housing Provisions, relevant AustralianStandards and the relevant conditions of Development Consent.With regards High-Fronted gutters I advise that clause 3.5.2.4(d) has beencomplied with.The method used was -

Continuous overflow measures

Non-continuous overflow measures

Other overflow measures and it was installed in accordance with the

manufacturers specifications.Further, I am appropriately qualified and experienced to provide thecertification for this project.

Signature ..

Date //


3/5

Smoke Alarm Certification

Description

SMOKE ALARM CERTIFICATION FORM FOR

APPLICANTS/BUILDERS/PRINCIPAL CONTRACTORS


________/______

I..........................................................................................................................Of........................................................................................................................

Being the applicant/principal contractor/electrician hereby certify that thesmoke alarms have been located, installed and connected to the mainselectrical supply in accordance with Part 3.7.2 of Volume 2 of the BuildingCode of Australia and Australian Standard AS3786-1993 Smoke Alarms,and the relevant conditions of Development Consent.Further, I am appropriately qualified and experienced to provide thecertification for this component of the project.

Signature ..

Date //


4/5

BASIX Certification Certificate

Description

BASIX SELF CERTIFICATION FORM FOR

APPLICANTS/BUILDERS/PRINCIPAL CONTRACTORS


________/______

I...........................................................................................................................Of........................................................................................................................Being the applicant/builder/principal contractor

I hereby certify that I have inspected the building work and installationsrelative to the attached BASIX certificate number on../../.. and that the building is completed and ready for afinal inspection.

I hereby certify that all of the BASIX commitments made on theaforementioned BASIX Certificate havebeen met, all necessary fittings installed, and all necessary works completedin accordance with the prescribed requirements and the approved plans andspecifications.

Signature ..

Date //


5/5

Bushfire Zone Certification Certificate

Description

BUSHFIRE COMPLIANCE CERTIFICATION FORMFOR APPLICANTS/BUILDERS/PRINCIPAL CONTRACTORS


________/______

I...........................................................................................................................Of........................................................................................................................

Being the applicant/builder/principal contractor

I hereby certify that I have complied with the Bushfire requirements set out inthe requirements of the Building Code of Australia, relevant AustralianStandards, and have installed components in accordance with themanufacturers specifications.

Signature ..

Date //

certificates for compliance

Documents