CESSNA 177

Shenzhen NICESKY Model Co., Ltd.

【CESSNA177】

* sea plane and standard plane in one box, pilots can experience different flights.* stable flight performance and easy to fly.* easy to take off from water and with normal landing gear.* scale and smooth surface of main wing and fuselage. Strong materialnot easy to be damaged by flight process.* easy for assembling within 5 minutes.

Length:575mm

Wing span: 680mm

Flying weight: 300g~330g

Motor:3000KV brushless motor

ESC:18A

Transmitter:4CH

Receiver:micro 4CH

Servo:9g X 2 And 5g X 2

Battery: 7.4V 500~850MAH 25~35C LI-PO

Thank you for purchasing an innovative product designed for hobby enthusiasts.The Cessna177 integrates the use of a radio transmitter, a speed controller,an electronic motor and electronic servos providing

longtime enjoyment.We'll have a specific instruction about this.

【CESSNA177】

6.Do not attempt to catch Cessna177 while flying.please do not touch the propeller.

1 2

3 4 5

66

7

7

8

8

9

9

32mm

1.Please use the screwdriver to fix the rear landing gear and fuselage.

1

2

3

4

5

Fuselage

Main wing

Radio system

Elevator

Landing gear

Charger

Battery

Floats

Accessories

The CG is located in the back away from the leading edge of the main wing for 32mm.

【CESSNA177】

Instruction of Assembly for Standard Version:

Main parts of Cessna177:

2.Please connect the poshrod with elevator. Then fix the screw.

3.Please put the main wing on the fuselage, and fix the three

screws with screwdriver.

4.Please open the battery bay, put the battery inside and close it. Till now, the cessna177 is ready.

【CESSNA177】

【CESSNA177】

1.Please take off the spinner, propeller and cowl first. Then take the motor off with inner hexagon spanner as well as the motor base. Add one pc of gasket each on the 2 holes. Resemble the motor please.

2.Please take off the front landing gear [standard version] and replace with servo arms for floats. Assemble the motor base together with the front steering servo arm. Then assemble the spinner, propeller and cowl.

Instruction of Assembly for Sea Plane:

【CESSNA177】

3.Please take this foam to the slot of fuselage.

4.Please fix the floats to fuselage with screws. Then connect the floats with rods and glue them. Please let the steering steel go through the servo arms for sea plane and fix them. Till now, the sea plane is ready.

【CESSNA177】【CESSNA177】【CESSNA177】【CESSNA177】

7

【CESSNA177】

8

4. Keep flight horizontal: when you find it is difficult to fly Cessna177 ,please adjust the trim on the transmitter. For example, when you find Cessna177 always fly upward ,pleasepush the trim on the transmitter toward the top,as this will adjust the position of the elevator.

Shenzhen NICESKY Model Co., Ltd. www.nicesky.net