7/30/2019 CF Card Format

1/2

CF Card Format ==>==================

[10:51][yashp@ultima:~]# pm_cons f2040-206-93

f2040-206-93> reboot

LOADER-A>

LOADER-A> ifconfig e0a -addr=10.72.206.93 -mask=255.255.255.192 -gw=10.72.206.65-dns=10.72.144.28 up

LOADER-A> ping 10.72.144.29

LOADER-A> netboot http://10.72.144.29/rlse/RironcityN_100614_2230/prod/build/maytag_kern.8

Press CTRL-C for special boot menu

Selection (1-5)? 24/7

Install new file system without zeroing disks? yesREALLY install file system without zeroing disks? yesFor initial volume creation, you can choose to create traditional volumes,

or create flexible volumes. Please select one ('t' or 'f'): fThere are 6 disks in the system. You can have up to 4 spares.How many disks should be designated as spares [1]: 4How many volumes [1]:Number of RAID groups per volume [0]:Default RAID group size

Contacting DHCP server.Ctrl-C to skip DHCP search ...Configuring e0a using DHCP aborted.

Please enter the new hostname []: f2040-206-93

Do you want to enable IPv6? [n]:Do you want to configure virtual network interfaces? [n]:Please enter the IP address for Network Interface e0a []: 10.72.206.93Please enter the netmask for Network Interface e0a [255.0.0.0]: 255.255.255.192Should interface e0a take over a partner IP address during failover? [n]:Please enter media type for e0a {100tx-fd, tp-fd, 100tx, tp, auto (10/100/1000)}

[auto]:Please enter flow control for e0a {none, receive, send, full} [full]:Do you want e0a to support jumbo frames? [n]:Please enter the IP address for Network Interface e0b []:Should interface e0b take over a partner IP address during failover? [n]:Please enter the IP address for Network Interface e0c []:Should interface e0c take over a partner IP address during failover? [n]:

Please enter the IP address for Network Interface e0d []:Should interface e0d take over a partner IP address during failover? [n]:Would you like to continue setup through the web interface? [n]:Please enter the name or IP address of the IPv4 default gateway: 10.72.206.65Please enter the name or IP address of the administration host:Where is the filer located? []: NBDo you want to run DNS resolver? [n]:Do you want to run NIS client? [n]:Would you like to configure the BMC [y]: nDo you want to configure the Shelf Alternate Control Path Management interface f

7/30/2019 CF Card Format

2/2

or SAS shelves [n]:

f2040-206-93> priv set advanced

f2040-206-93*> bootfs help dirbootfs dir displays the contents of a directorydir [ -r ] = ://

your boot drive is 0e.0:1:

f2040-206-93*> bootfs format 0e.0:1:

f2040-206-93*> reboot

LOADER-A> set-defaults

LOADER-A>

=======================================================================================================================================

f3050-202-29*> sysconfig (or sysconfig -a or sysconfig -av 0)slot 0: NetApp ATA/IDE Adapter 0f (0x000001f0)

0f.0 SanDisk SDCFB-256-911B 2.15 245MB 512B/sect (001422L0904H1757)

f3050-202-29*> bootfs help diryour boot drive is 0f.0:1:

f3050-202-29*> bootfs format 0f.0:1:

f3050-202-29*> bootfs info 0f.0:1:--------------------------------------------------------------------------------

partition: 1 2 3 4--------------------------------------------------------------------------------

file system: ? ? ? ?

bytes per cluster:number of clusters:total bytes:

usable bytes:free bytes:

FAT location:root location:data location:

=======================================================================================================================================