cfaed inaugural lecture - tu dresden · akash kumar received the joint ph.d. degree in embedded...

1
cfaed.tu-dresden.de cfaed INAUGURAL LECTURE PROF. AKASH KUMAR TU Dresden, Faculty of Computer Science cfaed – Center for Advancing Electronics Dresden “Design Methodologies for Reliable and Energy-Efficient Multiprocessor System” Friday, 29 April 2016 — 15:00 Room E023 — Andreas-Pfitzmann-Building TU Dresden Nöthnitzer Straße 46, 01187 Dresden As the performance demands of applications (e.g., multimedia) are growing, multiple processing cores are integrated together to form multiprocessor systems. Energy minimization is a primary optimization objective for these systems. An emerging concern for designs at deep-submicron technology nodes (65nm and below) is the lifetime reliability, as escalating power density and hence temperature variation continues to accelerate wear-out leading to a growing prominence of device defects. As such, reliability and energy need to be incorporated in the multiprocessor design methodology. In this talk, I will present a platform-based design methodology in order to minimize temperature-related wear-outs. I will also cover concepts of approximate computing and how they can be used to address the problems shown by emerging power-wall in modern systems. Akash Kumar received the joint Ph.D. degree in embedded systems from the National University of Singapore (NUS) and the Eindhoven University of Technology (TUe), Eindhoven, The Neth- erlands, in 2009. He is currently the Chair for Processor Design at the Center for Advancing Electronics Dresden, Technische Universität Dresden, Germany. His research interests include design, analysis and resource management of low-power and fault tolerant embedded multi- processor systems. He has published over 100 papers in leading international electronic design automation journals and conferences on these topics. He has received best paper award nomi- nations including SC 2015, DATE 2015 and FPL 2014. He is also a member of technical program committees of major conferences in the design automation and FPGA design area like, DAC, DATE, CASES, ASPDAC, FPL, FPT, etc. The inaugural lecture will be followed by a small reception.

Upload: others

Post on 26-May-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: cfaed INAUGURAL LECTURE - TU Dresden · Akash Kumar received the joint Ph.D. degree in embedded systems from the National University of Singapore (NUS) and the Eindhoven University

cfaed.tu-dresden.de

cfaed INAUGURAL LECTURE

PROF. AKASH KUMARTU Dresden, Faculty of Computer Sciencecfaed – Center for Advancing Electronics Dresden

“Design Methodologies for Reliable and Energy-Efficient Multiprocessor System”

Friday, 29 April 2016 — 15:00 Room E023 — Andreas-Pfitzmann-Building TU DresdenNöthnitzer Straße 46, 01187 Dresden

As the performance demands of applications (e.g., multimedia) are growing, multiple processing cores are integrated together to form multiprocessor systems. Energy minimization is a primary optimization objective for these systems. An emerging concern for designs at deep-submicron technology nodes (65nm and below) is the lifetime reliability, as escalating power density and hence temperature variation continues to accelerate wear-out leading to a growing prominence of device defects. As such, reliability and energy need to be incorporated in the multiprocessor design methodology. In this talk, I will present a platform-based design methodology in order to minimize temperature-related wear-outs. I will also cover concepts of approximate computing and how they can be used to address the problems shown by emerging power-wall in modern systems.

Akash Kumar received the joint Ph.D. degree in embedded systems from the National University of Singapore (NUS) and the Eindhoven University of Technology (TUe), Eindhoven, The Neth-erlands, in 2009. He is currently the Chair for Processor Design at the Center for Advancing Electronics Dresden, Technische Universität Dresden, Germany. His research interests include design, analysis and resource management of low-power and fault tolerant embedded multi-processor systems. He has published over 100 papers in leading international electronic design automation journals and conferences on these topics. He has received best paper award nomi-nations including SC 2015, DATE 2015 and FPL 2014. He is also a member of technical program committees of major conferences in the design automation and FPGA design area like, DAC, DATE, CASES, ASPDAC, FPL, FPT, etc.

The inaugural lecture will be followed by a small reception.