1. A network administrator is planning an IOS upgrade onseveral of the head office routers and switches. Whichthree questions must be answered before continuingwith the IOS selection and upgrade? (Choose three.):1.What models of routers and switches require upgrades2.Do the routers and switches have enough RAM and flashmemory for the proposed IOS versions3.What features are required for the devices

2. A network administrator needs to keep the user ID,password, and session contents private whenestablishing remote CLI connectivity with a switch tomanage it. Which access method should be chosen?:SSH

3. A new network administrator has been asked to enter abanner message on a Cisco device. What is the fastestway a network administrator could test whether thebanner is properly configured?: Exit enable mode and pressEnter.

4. A router has a valid operating system and aconfiguration stored in NVRAM. When the router bootsup, which mode will display?: user EXEC mode

5. AUX port:: 1.It connects through dialup connections. 2. It is not supported on Catalyst switch devices.

6. Ctrl-C: cancels any command currently being entered and returnsdirectly to privileged EXEC mode

7. Ctrl-R: Redisplays, on a new line, the command currently beingtyped

8. Ctrl-Shift-6: Allows the user to interrupt an IOS process such asping or traceroute

9. Ctrl-Z: Exits configuration mode and returns to the EXEC

10. Passwords can be used to restrict access to all or partsof the Cisco IOS. Select the modes and interfaces thatcan be protected with passwords. (Choose three.): 1.VTYinterface2.console interface3.privileged EXEC mode

11. Refer to the exhibit. A switch was configured as shown.A ping to the default gateway was issued, but the pingwas not successful. Other switches in the same networkcan ping this gateway. What is a possible reason forthis?: The no shutdown command was not issued for VLAN 1.

12. Tab will: Completes the remainder of a partially typed commandor keyword

13. Up Arrow: Allows user to scroll backward through formercommands

14. What benefit does DHCP provide to a network?: Hostscan connect to the network and get an IP address withoutmanual configuration.

15. What command can be used on a Windows PC to see theIP configuration of that computer?: ipconfig

16. What criterion must be followed in the design of an IPv4addressing scheme for end devices?: Each IP address mustbe unique within the local network.

17. What is a result of using the service password-encryption command on a Cisco network device?: Allpasswords in the configuration are not shown in clear text whenviewing the configuration.

18. What is a user trying to determine when issuing a ping10.1.1.1 command on a PC?: if there is connectivity with thedestination device

19. Which describes a console port?: 1.It displays startup,debugging, and error messages by default. 2.It can be used to restore an out-of-box configuration on aswitch or router.

20. Which describes Virtual Interface?: 1. It uses Telnet or SSHprotocols for access. 2. It requires an active network connection.

21. Which interface allows remote management of a Layer 2switch?: the switch virtual interface

22. Which procedure is used to access a Cisco 2960 switchwhen performing an initial configuration in a secureenvironment?: Use the console port to locally access theswitch from a serial or USB interface of the PC.

23. Which statement is true about the runningconfiguration file in a Cisco IOS device?: It affects theoperation of the device immediately when modified.

24. Which two characters are allowed as part of thehostname of a Cisco device? (Choose two.): 1.Numbers2.Underline

25. Which two features are characteristics of flashmemory? (Choose two.): 1.Flash provides nonvolatilestorage.2.The contents of flash may be overwritten.

26. Which two functions are provided to users by thecontext-sensitive help feature of the Cisco IOS CLI?(Choose two.): 1.displaying a list of all available commandswithin the current mode2.determining which option, keyword, or argument is availablefor the entered command

27. While trying to solve a network issue, a technician mademultiple changes to the current router configurationfile. The changes did not solve the problem and were notsaved. What action can the technician take to discardthe changes and work with the file in NVRAM?: Issue thereload command without saving the running configuration.

28. Why is it important to configure a hostname on adevice?: to identify the device during remote access (SSH ortelnet)

29. Why would a Layer 2 switch need an IP address?: toenable the switch to be managed remotely

Cisco Chapter 2Study online at quizlet.com/_fdp1q