chane pressure assist toilet · 2019-08-13 · canada 5970 chedworth way, unit b, mississauga....

1
CANADA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CA USA 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US REVISED AUGUST 2019 CHANE PRESSURE ASSIST TOILET 3.8LPF / 1.0GPF NOTES: This toilet is designed to rough-in at a minimum dimension of 108mm (4¼") from finished floorto C/L of outlet. Supply line not included with fixture and must be ordered separately. Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product. PRODUCT SPECS: - High efficiency pressure assist toilet - 3.8Lpf / 1.0Gpf - Powerful and quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste - Elongated siphon jet action bowl - Vitreous china - 17" bowl height - Chrome tank lever - Back outlet flange - 2" Fully glazed ball pass trapway - Water surface: 11⅝" x 7⅞" (295mm x 198mm) - Toilet seat not included DIMENSIONS: 447mm W x 755mm D x 800mm H 17½" W x 29¾" D x 31½" H COMPLIANCE CERTIFICATIONS Meets or exceeds the following: - IAPMO cUPC - US EPA WaterSense - ASME A112.19.2 / CSA B45.1 - ANSI A117.1 ADA Guideline - MaP Premium Tested 1000g - LEED Compliant SHIPPING Bowl: Cube 5.13 GW 60 lbs Tank: Cube 1.43 GW 33 lbs ¨ 5722BMY Bowl ¨ 5721BOY Unlined Pressure Assist Tank TO BE SPECIFIED Colour: n Soft White FINISHED FLOOR FINISHED WALL 430mm (17") 638mm (25⅛") 470mm (18½") 755mm (29¾") 755mm (29¾") 209mm (9⅞") C/L OF SEAT POST HOLES 140mm (5½") 447mm (17½") 357mm (14⅛") 375mm (14⅞") 232mm (9¼") 800mm (31½") 232mm (9¼") 375mm (14⅞") 150mm (5⅞") 108mm (4¼") Ø82mm (3¼") Ø65mm (2⅝") 22 * 12mm (⅞" * ½") BACK VIEW

Upload: others

Post on 03-Jun-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CHANE PRESSURE ASSIST TOILET · 2019-08-13 · CANADA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CA USA 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA

C A N A DA 5970 CHEDWORTH WAY, UNIT B, MISSISSAUGA. ONTARIO, CANADA L5R 4G5 | CONTRAC.CAU S A 6241 NORTHWIND PARKWAY, HOBART, INDIANA, USA 46342 | CONTRAC.US

REVISED AUGUST 2019

CHANE PRESSURE ASSIST TOILET3.8LPF / 1.0GPF

NOTES: This toilet is designed to rough-in at a minimum dimension of 108mm (4¼") from finished floorto C/L of outlet. Supply line not included with fixture and must be ordered separately.

Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ASME standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.

PRODUCT SPECS:- High e�ciency pressure assist toilet

- 3.8Lpf / 1.0Gpf

- Powerful and quiet pressure assisted Sloan FLUSHMATE® Flush assures clean and complete removal of all waste

- Elongated siphon jet action bowl

- Vitreous china

- 17" bowl height

- Chrome tank lever

- Back outlet flange

- 2" Fully glazed ball pass trapway

- Water surface: 11⅝" x 7⅞"(295mm x 198mm)

- Toilet seat not included

DIMENSIONS:447mm W x 755mm D x 800mm H

17½" W x 29¾" D x 31½" H

COMPLIANCE CERTIFICATIONSMeets or exceeds the following:

- IAPMO cUPC

- US EPA WaterSense

- ASME A112.19.2 / CSA B45.1

- ANSI A117.1 ADA Guideline

- MaP Premium Tested 1000g

- LEED Compliant

SHIPPINGBowl:

Cube 5.13

GW 60 lbs

Tank:

Cube 1.43

GW 33 lbs

¨ 5722BMY Bowl¨ 5721BOY Unlined Pressure Assist Tank

TO BE SPECIFIED

Colour:n Soft White

FINISHED FLOOR

FIN

ISH

ED W

ALL

430mm(17")

638mm (25⅛")

470mm (18½")

755mm (29¾")

755mm (29¾")

209mm (9⅞")

C/L OF SEAT POST HOLES140mm (5½")

447mm (17½")

357mm(14⅛")

375mm (14⅞")

232mm (9¼")

800mm(31½")

232mm (9¼")

375mm (14⅞")

150mm (5⅞")

108mm(4¼")

Ø82mm(3¼")

Ø65mm(2⅝")

22 * 12mm(⅞" * ½")

BACK VIEW