change notice - tti europe...customer (fiat) requested this connector family to be reinforced to...
TRANSCRIPT
DPGW-4.5-PE-WCS-01 F06
Change Request No. Delphi (old) part number
Date Part change level number (old REV)
Supplier name Delphi (new) part number
Supplier manufacturing location Part change level number (new REV)
Supplier change contact Customer part number
Phone number Drawing number
Email adress DWG change level number (new REV)
OEM initiated change (yes/no) Drawing date
Affected OEM Part name
Resp. Component Engineer: Change Description
Customer receiving locations Affected Carline
CHANGE DESCRIPTION
Affects:Production ProcessManufacturing LocationPoint of PurchaseTool (Capa, Replacement)MaterialSub- supplierPackagingDrawing / DimensionsSupply ConditionFunctionDesignOther
Change compatible with previous revision level of mating parts ?
Tooling:
Disposition Stock:
IMPLEMENTATION PLANNING INFORMATION
Implementation date after release of PPAP and customer order of new part numbersOEM approval date FIAT approved design change on 28th September 2018Sample date Week 50/2018PPAP date Week 50/2018First shipment date Week 03/2019 (stock of old design level will be used before new design is delivered)
Date Signature
Customer FeedbackComments:
Name Phone E-mail
Purchasing
Supplier Quality Development
Customer Service Center
Operations
NOTE: 11/19/2012 Revision 01DPGP-4.5-PE-WCS. 01 F06
N/A
01
01
Customer (FIAT) requested this connector family to be reinforced to improve resistance during mating operation.
Receptacle Housing 32 way:-Black cover + lever: PN 35151230 was 33289001
35151230APTIV S&P MOBILITY SERVICES SPAIN, S.L.
10/18/2018
10/23/2018
Detailed description of change
CHANGE NOTICE
Further information
Reason for change
TTI (Germany)Power & Signal (US)
PROCESS AND COMPONENT INFORMATION33289001
FIAT
+34 948179223
yes
CR-17/12074
Iñaki Loperena
Pamplona (Spain)
Immediate Change Running Change
Signature & Date
N/A
15471044
12
Tomasz Tecza
Receptacle Housing 32W for DSQ 1.5; DSQ 2.8; Usealed
Design improvement to make connector more robust
Detailed desription of impact of the change according to the indicated affects
This design change consists on making bigger and stronger pins in black cover and adding ribs to lever in order to reinforce these elements, which withstand the forces during mating operation.
Yes No
use scrap
Additional Revised
October 2018 CS Pamplona
32W BCM FEMALE CONNECTOR COVER
DESIGN CHANGE IMPROVEMENT
32 ways BCM Connector Robust Design Improvement
Cover Color
15471031 Black
PERMANENT MODIFICATIONNo new part number
Cover 180o
1. Design change in cover 180o
Make bigger and stronger key on cover’s pin to reinforce its cutting by the lever during connector mating operation.
2.2 mm(as the green version
13894855)Adding 1 mm about
ComparisonCurrent status Modification
PERMANENT MODIFICATION
Cover 180o
2. Design change in cover 180ºAdd additional ring 0.1mm height.
Current status Modification
Material added(0.1 mm height)
PERMANENT MODIFICATION
PN Colour
Old lever 33288996 White
New lever 35151120 Grey
PERMANENT MODIFICATIONPart number is changing
32 ways BCM Connector Robust Design Improvement
Lever1. Design change in leverChange saver area by adding to ribs to receive stiffer guiding slot – cam area.
PERMANENT MODIFICATION
Current status Modification
Place for ejector
Lever2. Design change in leverAdd ramp (0.15mm height) on the lever’s groove for closer holding lever to the cover
during the mating.
PERMANENT MODIFICATION
Current status Modification
Lever3. Design change in leverAdd ribs to reinforce the lever.
PERMANENT MODIFICATION
Current status Modification proposal
1.5 x 1.3 mm
Assemblies (cover + lever) PERMANENT MODIFICATION
Assembly New PN Old PNBlack cover + lever 35151230 33289001Green cover + lever 35151821 13894856