change the key, not the locks. - g d
TRANSCRIPT
CHANGE THE KEY,
NOT THE LOCKS.
CHAPTER 1
- Introduction
- Produktion and Quality Control
- Key Control
- World Patent
- Security Features
- EN 1303 Classificatione
- Key Control Policy
- Series 500. Cam locks with clockwise rotation 0°-132°
- Series 500. Cam locks with counter-clockwise rotation 0°-132°
- Series 500. Cam locks with clockwise rotation 0° - 90°
- Series 500. Cam locks with counter-clockwise rotation 0° - 90°
- Series 500. Cam locks with special rotation
- Summary Table of cam locks
- Cams with 10 mm hole
- Cams with 7,9 mm hole
- Cams with 10,1 mm hole
- Cams with 6,9 mm hole
- Oval cams with two faces at 5,5 mm
- Spacers
- Series 4000. T-handle locks
- T-handle
- Series 900. Shackel Padlocks
- Series 800. Armoured Padlocks
- Serie 1100. European Profile cylinders
- Serie 1200. European Profile cylinders
- Serie 1400. European Profile cylinders
- Serie 3100. UK Profile cylinders
1 - 1
1 - 2
1 - 3
1 - 4
1 - 5
1 - 6
1 - 7
2 - 1
2 - 8
2 - 11
2 - 22
2 - 28
2 - 31
2 - 37
2 - 39
2 - 41
2 - 43
2 - 45
2 - 47
2 - 48
2 - 51
3 - 1
3 - 4
4 - 1
4 - 3
4 - 4
4 - 5
CHAPTER 3
CHAPTER 2
CHAPTER 4
- Series 3200. UK Profile cylinders
- Series 3400. UK Profile cylinders
- Series 3800. Profile cylinders
- Series 6000. Cylinders
- Accessories
- Cylinders series 5000. Rim, Mortise ,Deadbolt e Knob
- Series 2000. Shutter and furniture locks 6 - 1
- Series 600. Switch locks 7 - 1
- Series 3000. Safe 8 - 1
- Displays 9 - 1
4 - 6
4 - 7
4 - 8
4 - 10
5 - 1
CHAPTER 9
4 - 12
CHAPTER 5
CHAPTER 6
CHAPTER 7
CHAPTER 8
"Only one key to open many locks and the possibility to change this key whenever you like"
Rielda has established itself as one of the most dynamic an d expanding companies in the world of
security. The entrance in the International markets started in 1990 when the Technical Department
developed a line of new security cylinder locks which permitted a controlled management of the keys
as never before.
THE MECHANICALLY RE-PROGRAMMABLE CYLINDER LOCKS
The success of the mechanically re-programmable cylinder lo ck originates from its utility in many
sectors where the main necessity is to combine security and the management of a large number of
keys.
The Re-Programmable concept is so unique that it has been patented in 67 countries around the
world and has allowed Rielda to become well-known in the International markets, and transforming a
family run concern into a leading company in the field of security. The huge success which it has
achieved has allowed the company to design and produce a wide range of Re- Programmable
products for use in the residential and Industrial market and in commercial applications. The Re-
Programmable security locks combine features from the security against forced openings and picking
to the advantages offered by the Re-Programmability.
Since the presentation of the Rielda products they have bee n used and continue so in many market
sectors such as Telecommunications, banks, airline companies, vending machines, gaming
establishments and residential and commercial sites. The on going investment in the production
process, the continuous technological innovations and a precise planning has allowed Rields to adapt
continuously to the needs of the clients.
The results of the on going investments combined with a win ning commercial strategy has permitted
Rielda to continuously increase its sales volume and reach an important market position. Today,
Rielda is a modern company with three production sites, equipped with cutting edge automatic work
stations. These permit the production of a wide range of Re-Programmable locks. Nowadays, Rielda
exports its range of products continuously to 15 countries, supplying catalogue articles and special
products designed for the specific requirements of the single client.
1 -1
RIELDA S.r.l.
Headquarter and Factories:
Fraz.Castello di Corno (Area Industriale)
02013 Antrodoco (Rieti) Italy
Tel ++39 0746 577044 Fax +39 0746 577046
e-mail [email protected] web site: www.rielda.it
PRODUCTION
The huge success and the development of
Rielda over the years has been due to a
number of factors and a decisive part has
been the substantial investments in
technology which has permitted the company
to be flexible and follow the needs of the
client.
Today, the production process represents
"state of the art technique in the lock
production"
The entire production is fully automated.
The company has numerically controlled
multi axle machines, robots, rotary transfer
machines, broaches, presses, electron
dischargers and automatic key cutting
machines.
!
!
QUALITY CONTROL
A sophisticated control system maintains
Rielda's high quality management. The
laboratories are equipped with sophisticated
machines which are able to reach a high level of
measurement and control. Automatic and manual
optoelectronic machines control the internal
alignments of the products. The quality control
process covers each step of the production
cycle and tests the final product before the parts
are transferred to the store room. The durability
tests ( opening and closing sequences ) are
carried out by automatic machines before
commencing mass production.
RESEARCH AND DEVELOPMENT
The R&D department represents the most
important part of the company. Engineers and
designers are constantly working to create new
security products to suit any requirement.
1 - 2
Fig.1 Fig.2 Fig.3 Fig.4
Re-Programming operationsProgramming operation
1. Insert the programming key ( gold colour )
2. Rotate the key 180° or half a turn ( from the Re-
Programming position to the close position ) and
remove the key. The User key ( silver colour ) can now
be used to operate the cylinder.
3. Insert the original Programming key ( gold colour )
4. Rotate the key 180° or half a turn ( from the close
position to the Re-Programmable position) and remove
the key.
Take a new key set and repeat the programming
sequence as in fig. 1 and 2.
1 - 3
ARE YOUR POSSESSIONS SAFE?
- Do you have complete management of all your keys?
- Is there a possibility that someone may have a copy of yo ur keys?
- Have you or someone else lost your keys?
In many cases the security of your possessions, even if it is for a brief period, may be undermined by
the loss of your key management. In these moments the security must be restored by changing the
locks. This involves inevitable costs, inconvenience and a waste of time.
Rielda offers an innovative and extensive range of mechanically Re- Programmable cylinder locks
enabling you to resolve all the security problems and key management quickly and simply.
The Rielda Re-Programmable locks allow the user to change the key currently in use with a completely
different one, without changing the cylinder. By using the Programming key all you need to do is insert
the key in the lock, turn the key 180° and the combination of the cylinder has been changed, cancelling
the key previously used. There is no need to change the cylinder in the support.
In this way it is very easy to disable lost keys, ones which have not been returned, duplicated without
authorization or which have ended up in the wrong hands.
- Do you need to manage a number of locks?
The mechanically Re-Programmable locks supply another very important solution for a group lock
management. By programming all the cylinders with the same key it is now possible to open or close all
of your locks ( doors, security bars, gates, post boxes, vending machines, gaming machines) or groups
of these with only one key.
Now the cylinder has been Re-Programmed with a new key and neither the old programming key
( gold colour ) nor the old user key ( silver colour ) can open the lock.
WORLD PATENT
Argentina
Australia
Austria
Belgium
Bolivia
Brazil
Bulgary
Canada
Chile
China
Colombia
Croatia
Cuba
Denmark
Egypt
Philippines
Finland
France
Germany
Japan
Great Britain
Greece
Guatemala
India
Indonesia
Ireland
Israel
Italy
Kenya
Latvia
Liechtenstein
Lithuania
Romania
Russia (Federation)
Singapore
Slovenia
Spain
USA
South Africa
Sweden
Switzerland
Thailand
Taiwan
Turkey
Ukraine
Hungary
Uraguay
Venezuela
Jugoslavia
Luxemburg
Malesia
Marocco
Mexico
Munich
Nicaragua
Norway
New Zealand
Netherlands
Pakistan
Paraguay
Perù
Poland
Portugal
Dem.Rep. of Korea
Republic of Korea
1 - 4
The Re- Programmable security cylinders
produced by Rielda
are Patented together with the keys
in the following countries:
SECURITY CHARACTERISTICS
The Rielda Re-Programmable security cylinder locks are extr emely reliable and have been tested in
accordance with the EN 1303 standards referring to the safety requirements and durability ( opening
and closing cycle ) which form the European standard.
The Re-Programmable security locks are built to have:
- Anti-drill by using a hardened steel pin
- Anti- manipulation
- Protected against extraction and/or pushing of the rotor
- Equipped with a double blocking system to enhance the ext raction resistance and the
forced rotation
- Supplied with Nickel-Silver keys able to guarantee a hig h resistance of use and torsion
The key management policy offers various opportunities such as; duplicable keys only with a
security card and non duplicable keys
The duplicated keys can only be produced by Rielda and only after showing the security card which
validates the legitimate owner.
1 - 5
EN 1303 CLASSIFICATION
The Rielda Re-Programmable security cylinder locks are test ed according to the EN 1303 standards.
This European standard specifies the quality in relation to the resistance, security, durability and corrosion
of the cylinder and original key based on 7 categories .
EN1303 Class i f icat ionThis standard classifies cylinders using a 7 digit coding system.
Each digit refers to a particular feature of the product measured against the standard’s
performance requirements.
Digit 1 - Category of use - grade 1: Suitable for use at extremes of temperature
- 20C to +80C.
Digit 2 - Durability - grade 4: 25 000 cycles completed.
- grade 5: 50 000 cycles completed.
- grade 6: 100 000 cycles completed.
Digit 3 - Door Mas No requirement.
Digit 4 - Fire Resistance - grade 0: No requirement.
- grade 1: Cylinders shall be fire tested in accordancewith current fire test requirementsof prEN 1634-1.
Digit 5 - Safety No requirement.
Digit 6 - Corrosionr Resistance - grade 0: No requirement.
- grade 1: Conforms to grade 3 of EN 1670
as a minimum.
Digit 7 - Security Cylinders will be classified in grades 1 to 5, where 5 is
the highest.The grade of security can differ from one
side of a double cylinder to the other.
Grades
1 2 3 4 5
Min. no. of effective differs 100 300 15 000 30 000 100 000
Min. no. of movable pins 2 3 5 6 6
Direct coding on key YES YES NO NO NO
Max. net drill time (mins.) - - - 3 5
Total drill test time (mins) - - - 5 10
Chisel attack resistance (No. of blows) - - - 30 40
Cylinder extraction resistance - - - 15kN 15kN
Cylinder torque resistnce (Nm ) 2.5 5 15 20 30
Example
The following marking denotes a cylinder meeting the
required category of use, durability grade 6 (100 000 cycles)
with no fire resistance requirement, grade 1 corrosion resistance and grade 4 security.
Note: To gain chisel or torque
resistance it is important that either,
(1) the correct length of cylinder
is used to be flush with the door/
handle face OR (2) a high security
rose is used to cover any
cylinder protrusion.
1 6 - 0 - 1 4
Security Rose
*
*
*1 210 10
1 - 6
SECURITY CARD: This card is supplied with
each registered key set and allows the owner,
and only the owner, to request a copy of the
key. The duplicates are cut at the Rielda
company.
PATENT: The Rielda keys are patent
protected. The unauthorized duplication is a
legal offence.
NON DUPLICABLE KEYS: These keys are
supplied without the security card and this
puts them at the highest security level. Not
even Rielda is authorized to duplicate them
and so represent maximum control.
KEY SETS: The key sets are sold separately
from the lock and contain 1 PROGRAMMING
KEY ( gold colour ) and a number of USER
KEYS (silver colour), the number of keys
required are decided on by the client. The
standard key sets are available as follows:
Description(SILVER)
USE KEY (GOLD)
PROGRAMMINGKEY
Keys on request Minimum25
On request
Kit 1+3
Kit 1+5
Kit 1+10
Kit 1+20
3
5
10
20
1
1
1
1
All the sets are available in the following
groups:
- Key set with a non duplicable code
- Key set with security card
- Key set with cover and security card (
Elegant series )
ALL THE KEYS ARE IN NICKLE-SILVER
1 - 7
KEY MANAGEMENT
" Only the legitimate owner of the key may request a duplic ate"
The security of every lock system depends fundamentally on two factors:
1. The physical resistance against attacks such as: manipul ation, drilling, forcing and other forms of
aggression.
2. The management of the key duplication
! !
The principle objective of the key management is to limit as far as
possible the acquisition of these keys by third parties. This point is of
crucial importance in determining the level of security of a lock system
and is an integral part of the same.
Office clerks, maintenance personnel, workers with a temporary
access to the original keys, which are not protected by a patent, have
no difficulty in obtaining a duplicate of the same keys for eventual
personal use. The management of the keys is essential for those who are protecting their own
security, their money and their privacy.
Rielda has faced the key management problem in three combined actions:
1. Legal protection of the keys by patenting the system
2. No sale of un-cut keys
3. The utilization of the RE-Prog ramming to restore the initial security level by changing the key.
The Rielda key sets are sold separately from the lock and contain 1 PROGRAMMING KEY ( gold
colour ) and a number of USER KEYS (silver colour), the number of keys required are decided on by
the client. The standard key sets are available as follows:
The changing of the key is the best way to restore the security of your locks and maintain the
management of the keys
Change the key, not the locks!
KEY MANAGEMENT POLICY
1 - 8
Re-Programmable Cylinder Locks
MODEL 503
MODEL 508 *
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 502*
2 - 1
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Clockwise Rotation
132 Degrees
Re-Programmable Cylinder Locks
MODEL 510
MODEL 511
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All theHS series is made on request).
MODEL 509*
2 - 2
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Clockwise Rotation
132 Degrees
Re-Programmable Cylinder Locks
MODEL 516
MODEL 517
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 512
2 - 3
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Clockwise Rotation
132 Degrees
Re-Programmable Cylinder Locks
MODEL 524
MODEL 525
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 522
2 - 4
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
132 Degrees
Lock's installation hole
Lock's installation hole
Lock's installation hole
MODEL 539
Re-Programmable Cylinder Locks
MODEL 547
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 534
2 - 5
LOCKED
OPEN/CHANGE
Clockwise Rotation
132 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 549
2 - 6
LOCKED
OPEN/CHANGE
Clockwise Rotation
132 Degrees
MODEL 552
LOCKED
OPEN/CHANGE
MODEL 557
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 584
2 - 7
LOCKED
OPEN/CHANGE
Clockwise Rotation
132 Degrees
MODEL 402
LOCKED
OPEN/CHANGE
MODEL 403
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 515
MODEL 520
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 513
2 - 8
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Counterclockwise
Rotation
132 Degrees
Re-Programmable Cylinder Locks
MODEL 536*
MODEL 538*
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 523*
2 - 9
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Counterclockwise
Rotation
132 Degrees
Re-Programmable Cylinder Locks
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 556
2 - 10
Counterclockwise
Rotation
132 Degrees
MODEL 407
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 514*
MODEL 518
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 501*
2 - 11
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 521
MODEL 526*
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 519
2 - 12
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 564
MODEL 565
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 562 D
2 - 24
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
Counterclockwise
Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
23,2
21,1
Re-Programmable Cylinder Locks
MODEL 548
MODEL 553
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 545
2 - 14
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 559 D
MODEL 560
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 554
2 - 15
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 564.02
MODEL 566*
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 563
2 - 16
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 570 D
MODEL 571 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 567
2 - 17
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 575
MODEL 578.02*
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 573 D
2 - 18
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 582
MODEL 583
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 580
2 - 19
Clockwise Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 595
MODEL 599 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 593
2 - 20
Clockwise Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 406 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 405 D
2 - 21
Clockwise Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 530
MODEL 531
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 527*
2 - 22
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Counterclockwise
Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 542
MODEL 561 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 540
2 - 23
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Counterclockwise
Rotation
90 Degrees
Re-Programmable Cylinder Locks
MODEL 564
MODEL 565
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 562 D
2 - 24
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
Counterclockwise
Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Re-Programmable Cylinder Locks
MODEL 569
MODEL 574 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 568
2 - 25
Lock's installation hole
Lock's installation hole
Lock's installation hole
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Counterclockwise
Rotation
90 Degrees
OPEN/CHANGE
LOCKED
Re-Programmable Cylinder Locks
MODEL 578.01*
MODEL 581
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 576 D
2 - 26
Lock's installation hole
Lock's installation hole
Lock's installation hole
Counterclockwise
Rotation
90 Degrees
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Re-Programmable Cylinder Locks
MODEL 404 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
2 - 27
LOCKED
OPEN / CHANGE
Counterclockwise
Rotation 90 Degrees
Lock's installation hole
Re-Programmable Cylinder Locks
MODEL 507
MODEL 551
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 505*
2 - 28
LOCKED
CHANGE90 Degrees
OPEN 170 Degrees
OPEN /CHANGE180 degrees
OPEN/CHANGE45 Degrees
LOCKED
Lock's installation hole
LOCKED
Re-Programmable Cylinder Locks
MODEL 558*
MODEL 579 D
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 535*
2 - 29
LOCKED
OPEN/CHANGE75 Degrees
CHANGE
OPENLOCKED45 Degrees
OPENLOCKED45 Degrees
LOCKED
OPEN /CHANGE 180 Degrees
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
*Production on request minimum 400 units.
CAM LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
MODEL 586
2 - 30
MODEL 587
OPEN /
LOCKED
OPEN /
LOCKED
CHANGE45 Degreed
OPENOPEN
CHANGE45 Degree
LOCKED
Lock's installation hole
Lock's installation hole
Re-Programmable Cylinder Locks
2 - 31
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE A
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
507
524
518
530
544
545
548
554
535
508
563
406 D
510
549
515
538
542
505
513
571 D
599 D
576 D
579 D
403
553
564.02
521
567
15,30
15,87
15,90
15,90
17,00
17,00
17,00
17,00
17,80
18,30
18,50
18,75
19,50
19,50
19,50
19,50
19,50
19,50
20,30
20,40
20,40
20,40
20,40
21,00
21,00
21,00
21,60
22,20
/
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
/
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M22x1
M21x1
M19x1
25,0
18,8
18,8
18,8
18,8
18,8
18,8
18,8
20,9
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
21,8
20,8
18,8
32
25
22
22
22
22
22
22
25
25
22
32
22
22
22
22
22
39,7
22
22
32
22
25
22
22
25
25
22
20,0
12,4
12,4
12,4
11,3
11,3
11,3
11,3
10,5
12,0
9,8
9,6
8,8
8,8
8,8
8,8
8,8
12,0
8,0
7,9
7,9
7,9
7,9
7,3
7,3
7,3
6,7
6,1
hole 4,0
n. 2 faces 4,6 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,4 at 0°
n. 2 faces 5,4 at 0°
n. 2 faces 5,3 at 0°
quadrat 7,8
hole 2,5
quadrat 7,9
quadrat 6,8
n.2 faces 8,5 at 90°
quadrat 6,8
n.2 faces 8,5 at 90°
quadrat 6,8
quadrat 7,8
quadrat 7,8
quadrat 7,9
n. 2 faces 7,9 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 0°
quadrat 7,1
quadrat 7,1
n. 2 faces 7,8 at 90°
quadrat 6,8
n. 2 faces 5,3 at 0°
n. 2 Facce 5,4 a 0°
/
M6x1
9/32 28 UNC
9/32 28 UNC
M7x1
M7x0,75
9/32 28 UNC
M8x1
/
M8x1
M8x1
M10x1
M8x1
9/32 28 UNC
M8x1
M8x1
M8x1
M8x1
M10x1
M10x1
M10x1
M10x1
M10x1
M8x1
M8x1
M10x1
M8x1
9/32 28 UNC
0° - 180° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 180° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132°Counter-Clockwise
0° - 132°Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90°; 0°-170°Clockwise
0° - 132°Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 45 Clock/CounterClock
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
2-28
2-4
2-11
2-22
2-13
2-14
2-14
2-15
2-29
2-1
2-16
2-21
2-2
2-6
2-8
2-9
2-23
2-28
2-8
2-17
2-20
2-26
2-29
2-7
2-14
2-16
2-12
2-17
Re-Programmable Cylinder Locks
2 - 32
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE A
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
582
583
593
562 D
568
587
534
502
523
595
573 D
405 D
561 D
564 D
574 D
581
503
509
525
557
536
556
526
541
527
522
580
520
22,20
22,20
22,20
22,20
22,20
22,20
22,22
22,30
22,30
22,30
22,50
22,50
22,50
22,50
22,50
22,50
23,00
23,00
23,00
23,00
23,00
23,00
23,30
23,30
23,30
24,30
25,00
25,30
M19x1
M19x1
M19x1
M22x1
M19x1
M19x1
M19x1
M19x1
M21x1
/
M21x1
M19x1
M21x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M21x1
M19x1
M21x1
M19x1
M19x1
M19x1
18,8
18,8
18,8
21,8
18,8
18,8
18,8
18,8
20,8
18,9
20,8
18,8
20,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
20,8
18,8
20,8
18,8
18,8
18,8
22
22
22
25
22
22
25
25
25
22
25
32
25
22
22
22
22
22
22
22
22
22
25
22
24,8
24
22
25
6,1
6,1
6,1
5,8
6,1
8,1
6,1
6,0
6,0
6,0
5,8
5,8
5,8
5,8
5,8
5,8
5,3
5,3
5,3
5,3
5,3
5,3
5,0
5,0
5,0
4,0
4,0
5,0
n. 2 faces 7,9 at 90°
quadrat 6,8
n. 2 faces 7,8 at 90°
n. 2 faces 8 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 4,6 at 0°
quadrat 7,8
n. 2 facce 7,5 at 90°
quadrat 6,7
n.2 faces 7,5 at 0°
n.2 faces 8,5 at 90°
n.2 faces 7,5 at 90°
n.2 faces 8,5 at 0°
quadrat 7,8
n.2 faces 8,5 at 0°
quadrat 7,8
n.2 faces 5,3 at 0°
quadrat 7,9 at 45°
quadrat 6,8
quadrat 7,8
n. 2 faces 7,9 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
quadrat 9,9
quadrat 9,9
quadrat 9,9
n. 2 Facce 5,4 a 0°
M10x1
M8x1
M10x1
M10x1
9/32 28UNC
9/32 28UNC
M6x1
M8x1
M10x1
/
M10x1
M10x1
M10x1
M10x1
M8x1
M10x1
M8x1
9/32 28UNC
M8x1
M8x1
M8x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90°Clock/CounterClock
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 132° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 132° Counter-Clockwise
2-19
2-19
2-20
2-24
2-25
2-30
2-5
2-1
2-9
2-20
2-18
2-21
2-23
2-24
2-25
2-26
2-1
2-2
2-4
2-6
2-9
2-10
2-12
2-13
2-22
2-4
2-19
2-8
t
Re-Programmable Cylinder Locks
2 - 33
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE A
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
540
539
564
559 D
570 D
404
558 D
584
560
578.02
578.01
517
514
516
547
575 D
501
519
531
528
511
512
552
402
407
569
566
586
551
25,30
25,40
25,50
26,50
26,50
26,50
26,50
27,00
27,00
27,50
27,50
27,80
28,10
28,30
28,30
28,30
28,60
28,60
28,60
31,00
32,30
32,30
32,30
32,30
32,30
32,30
33,80
35,00
36,20
M19x1
M19x1
/
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M22x1
M22x1
M19x1
M19x1
M22x1
M22x1
M22x1
M23x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M25x1
M19x1
/
18,8
18,8
21,0
18,8
18,8
18,8
18,8
18,8
18,8
21,8
21,8
18,8
18,8
21,8
21,8
21,8
23,0
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
24,8
18,8
18,8
22
22
26
22
22
22
22
25
25
25
25
22
22
28
28
28
32
22
22
22
22
22
22
22
22
22
27,6
22
22
3,0
5,3
2,8
5,0
5,0
5,0
5,0
6,1
6,1
2,7
2,7
5,0
2,2
2,0
2,0
2,7
/
5,7
5,7
5,0
6,0
6,0
6,0
6,0
6,0
6,0
2,7
5,7
4,0
quadrat 7,8
quadrat 7,8
n. 2 faces 7,8 at 90°
n. 2 faces 8,5 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,8 at 90°
°quadrat 7
n. 2 faces 4,6 at 0°
n. 2 faces 4,6 at 0°
n.2 faces 7,8 at 0°
n.2 faces 7,8 at 90°
n.2 faces 8,3 at 90°
n.2 faces 7,9 at 0°
n.2 faces 8,4 at 90°
n.2 faces 7,8 at 90°
n.2 faces 8,4 at 0°
n.2 faces 7,0 at 90°
n.2 faces 5,3 at 0°
n.2 faces 5,3 at 0°
hole M4 at 90°
quadrat 6,8
quadrat 6,8
quadrat 7,8 at 45°
quadrat 6,8
quadrat 6,8
quadrat 6,8
n. 2 faces 7,9 at 0°
n. 2 faces 5,3 at 0°
/
n. 2 Facce 5,4 a 0°
M8x1
M8x1
M10x1
M10x1
M10x1
M10x1
M8x1
M6x1
M6x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
9/32 28UNC
9/32 28UNC
/
M7x1
M6x1
M7x1
M6x1
M7x1
M7x1
M10x1
9/32 28UNC
/
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 75° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clock/CounterClock
0° - 45° Clockwise
2-23
2-5
2-24
2-15
2-17
2-27
2-29
2-7
2-15
2-18
2-26
2-3
2-11
2-3
2-5
2-18
2-11
2-12
2-22
2-13
2-2
2-3
2-6
2-7
2-10
2-25
2-16
2-30
2-28
Re-Programmable Cylinder Locks
2 - 34
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE B
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
511
512
552
402
407
569
586
551
595
521
523
573 D
561 D
526
527
535
564
564.02
562 D
578.02
578.01
516
547
575 D
501
566
507
32,30
32,30
32,30
32,30
32,30
32,30
35,00
36,20
22,30
21,60
22,30
22,50
22,50
23,30
23,30
17,80
25,50
21,00
22,20
27,50
27,50
28,30
28,30
28,30
28,60
33,80
15,30
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
/
/
M21x1
M21x1
M21x1
M21x1
M21x1
M21x1
/
/
M22x1
M22x1
M22x1
M22x1
M22x1
M22x1
M22x1
M23x1
M25x1
/
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,9
20,8
20,8
20,8
20,8
20,8
20,8
20,9
21
21,8
21,8
21,8
21,8
21,8
21,8
21,8
23
24,8
25
22
22
22
22
22
22
22
22
22
25
25
25
25
25
24,8
25
26
25
25
25
25
28
28
28
32
27,6
32
6,0
6,0
6,0
6,0
6,0
6,0
5,7
4,0
6,0
6,7
6,0
5,8
5,8
5,0
5,0
10,5
2,8
7,3
5,8
2,7
2,7
2,0
2,0
2,7
/
2,72
2,0
quadrat 6,8
quadrat 6,8
quadrat 7,8 at 45°
quadrat 6,8
quadrat 6,8
quadrat 6,8
n.2 faces 5,3 at 0°
/
quadrat 6,7
quadrat 6,8
n. 2 faces 7,5 at 90°
n. 2 faces 7,5 at 0°
n. 2 faces 7,5 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
hole 2,5
n.2 faces 7,8 at 90°
n.2 faces 7,8 at 90°
n.2 faces 8 at 0°
n.2 faces 7,8 at 0°
n.2 faces 7,8 at 90°
n.2 faces 8,4 at 90°
n.2 faces 7,8 at 90°
n.2 faces 8,4 at 0°
n.2 faces 7,0 at 90°
n.2 faces 7,9 at 0°
hole 4,0
M7x1
M6x1
M7x1
M6x1
M7x1
M7x1
9/32 28UNC
/
/
M8x1
M10x1
M10x1
M10x1
M10x1
M10x1
/
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
M10x1
/
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clock/CounterClock
0° - 45° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 132° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 180° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 180° Clockwise
2-2
2-3
2-6
2-7
2-10
2-25
2-30
2-28
2-20
2-12
2-9
2-18
2-23
2-12
2-22
2-29
2-24
2-16
2-24
2-18
2-26
2-3
2-5
2-18
2-11
2-16
2-28
Re-Programmable Cylinder Locks
2 - 35
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE B
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
524
518
530
544
545
548
554
508
563
406 D
510
549
515
538
542
505
513
571 D
599 D
576 D
579 D
403
553
567
582
583
593
568
15,87
15,90
15,90
17,00
17,00
17,00
17,00
18,30
18,50
18,75
19,50
19,50
19,50
19,50
19,50
19,50
20,30
20,40
20,40
20,40
20,40
21,00
21,00
22,20
22,20
22,20
22,20
22,20
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
25
22
22
22
22
22
22
25
22
32
22
22
22
22
22
39,7
22
22
32
22
25
22
22
22
22
22
22
22
12,4
12,4
12,4
11,3
11,3
11,3
11,3
12,0
9,8
9,6
8,8
8,8
8,8
8,8
8,8
12,0
8,0
7,9
7,9
7,9
7,9
7,3
7,3
6,1
6,1
6,1
6,1
6,1
n. 2 faces 4,6 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,4 at 0°
n. 2 faces 5,4 at 0°
n. 2 faces 5,3 at 0°
quadrat 7,8
quadrat 7,9
quadrat 6,8
n.2 faces 8,5 at 90°
quadrat 6,8
n. 2 faces 5,3 at 0°
quadrat 6,8
quadrat 7,8
quadrat 7,8
quadrat 7,9
n. 2 faces 7,9 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 90°
n. 2 faces 7,9 at 0°
quadrat 7,1
quadrat 7,1
n. 2 faces 5,3 at 0°
n.2 faces 7,9 at 90°
quadrat 6,8
n. 2 faces 7,8 at 0°
n. 2 faces 5,3 at 0°
M6x1
9/32 28UNC
9/32 28UNC
M7x1
M7x0,75
9/32 28UNC
M8x1
M8x1
M8x1
M10x1
M8x1
9/32 28UNC
M8x1
M8x1
M8x1
M8x1
M10x1
M10x1
M10x1
M10x1
M10x1
M8x1
M8x1
9/32 28UNC
M10x1
M8x1
M10x1
9/32 28UNC
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 132° Counter-Clockwise
0° - 90° Counter-Clockwise
0 °- 90° 0° - 170°Clockwise
0° - 132° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 45 °Clock/CounterClock
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
2-4
2-11
2-22
2-13
2-14
2-14
2-15
2-1
2-16
2-21
2-2
2-6
2-8
2-9
2-23
2-28
2-8
2-17
2-20
2-26
2-29
2-7
2-14
2-17
2-19
2-19
2-20
2-25
Re-Programmable Cylinder Locks
2 - 36
A
E
BC
Sez.S/S
F
D
G
ARRANGED FOR SIZE B
MODEL A NUT B C D BACK OUTLINE F BACK EDGING ROTATION PAGE
CORPS
587
534
502
405 D
564 D
574 D
581
503
509
525
557
536
556
541
522
580
520
540
539
559 D
570
404
558 D
584
560
517
514
519
531
528
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
M19x1
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
18,8
22
25
25
32
22
22
22
22
22
22
22
22
22
22
24
22
25
22
22
22
22
22
22
25
25
22
22
22
22
22
8,1
6,1
6,0
5,8
5,8
5,8
5,8
5,3
5,3
5,3
5,3
5,3
5,3
5,0
4,0
4,0
5,0
3,0
5,3
5,0
5,0
5,0
5,0
6,1
6,1
5,0
2,2
5,7
5,7
5,0
n. 2 faces 5,3 at 0°
n. 2 faces 4,6 at 0°
quadrat 7,8
n. 2 faces 8,5 at 90°
n. 2 faces 8,5 at 90°
quadrat 7,8
n. 2 faces 8,5 at 0°
quadrat 7,8
quadrat 7,9 at 45°
quadrat 6,8
quadrat 7,8
n. 2 faces 7,9 at 0°
n. 2 faces 7,9 at 90°
quadrat 9,9
quadrat 9,9
quadrat 9,9
quadrat 7,8
quadrat 7,8
quadrat 7,8
n. 2 faces 8,5 at 0°
n. 2 faces 7,9 at 90°
n. 2 faces 7,8 at 90°
quadrat 7
n. 2 faces 4,6 at 0°
n. 2 faces 4,6 at 0°
n. 2 faces 8,3 at 90°
n. 2 faces 7,9 at 0°
n. 2 faces 5,3 at 0°
n. 2 faces 5,3 at 0°
hole M4 at 90°
9/32 28UNC
M6x1
M8x1
M10x1
M10x1
M8x1
M10x1
M8x1
9/32 28UNC
M8x1
M8x1
M8x1
M10x1
M10x1
M10x1
M10x1
M10x1
M8x1
M8x1
M10x1
M10x1
M10x1
M8x1
M6x1
M6x1
M10x1
M10x1
9/32 28UNC
9/32 28UNC
/
0° - 90 °Clock/CounterClock
0° - 132° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Clockwise
0° - 132° Counter-Clockwise
0° - 132° Counter-Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 132° Counter-Clockwise
0° - 90° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 75° Counter-Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 132° Clockwise
0° - 90° Clockwise
0° - 90° Clockwise
0° - 90° Counter-Clockwise
0° - 90° Clockwise
2-30
2-5
2-1
2-21
2-24
2-25
2-26
2-1
2-2
2-4
2-6
2-9
2-10
2-13
2-4
2-19
2-8
2-23
2-5
2-15
2-17
2-27
2-29
2-7
2-15
2-3
2-11
2-12
2-22
2-13
22,20
22,22
22,30
22,50
22,50
22,50
22,50
23,00
23,00
23,00
23,00
23,00
23,00
23,30
24,30
25,00
25,30
25,30
25,40
26,50
26,50
26,50
26,50
27,00
27,00
27,80
28,10
28,60
28,60
31,00
2046,5
Re-Programmable Cylinder Locks
CAM MODEL 3
CAM MODEL 6
*Production on request.
CAM MODEL 1
2 - 37
10
B
A3
3511,5
24
10
A
B
3
24
10
A
B
3
3511,5
C
20 -48
2046,5 3
Dimension
A B C
Dimension
A B C
Dimension
A B C
-
CAM with 10 mm hole
Re-Programmable Cylinder Locks
CAM MODEL 11
*Production on request.
CAM MODEL 7
2 - 38
Dimension
A B C
Dimension
A B C
CAM with 10 mm hole
20
20
-
3
3211,5
7,9
A
B
A
B
48,5
3
11,5
7,9
60
43,5 6
Re-Programmable Cylinder Locks
CAM MODEL 103
CAM MODEL 106
*Production on request.
CAM MODEL 101
2 - 39
Dimension
A B C
Dimension
A B C
Dimension
A B C
CAM with 7,9 mm hole
2046,5
7,9
B
A3
3511,5
24
7,9
A
B
3
24
7,9
A
B
3
3511,5
C
2048
2046,5 3
-
-
Re-Programmable Cylinder Locks
CAM MODEL 111
*Production on request.
CAM MODEL 107
2 - 40
Dimension
A B C
Dimension
A B C
CAM with 7,9 mm hole
20
20
-
3
3211,5
7,9
A
B
A
B
48,5
3
11,5
7,9
60
43,5 6
Re-Programmable Cylinder Locks
CAM MODEL 303
CAM MODEL 306
*Production on request.
CAM MODEL 301
2 - 41
Dimension
A B C
Dimension
A B C
Dimension
A B C
CAM with 10,1 mm hole
-
2046,5
2048
2046,5 3
-
10,1
A3
3511,5
B8
B
10,1
A
24 24
3
8
10,1
11,5
A
35
8 B
3C
Re-Programmable Cylinder Locks
CAM MODEL 311
*Production on request.
CAM MODEL 307
2 - 42
Dimension
A B C
Dimension
A B C
CAM with 10,1 mm hole
2060
2043,5 6
-11,5
10,1
48,5
8 B
3
A
11,5
10,1
32
8 B
3
A
C
Re-Programmable Cylinder Locks
CAM MODEL 403 *
CAM MODEL 406*
*Production on request.
CAM MODEL 401
2 - 43
Dimension
A B C
Dimension
A B C
Dimension
A B C
CAM with 6,9 mm hole
2046,5
20
2046,5 3
-
6,9
A3
3511,5
B8
B
6,9
A
24 24
3
8
6,9
11,5
A
35
8 B
3C
48 -
Re-Programmable Cylinder Locks
CAM MODEL 411*
*Production on request.
CAM MODEL 407*
2 - 44
Dimension
A B C
Dimension
A B C
CAM with 6,9 mm hole
2060
2043,5 6
-11,5
6,9
48,5
8 B
3
A
11,5
6,9
32
8 B
3
A
C
Re-Programmable Cylinder Locks
VERTICAL HOLE
*Production on request.
HORIZONTAL HOLE
2 - 45
-
Dimension
A B C
3/4"3/4" 1/8"
3/4"1 1/8" 1/8"
3/4"1 1/4" 1/8"
3/4"1 1/2" 1/8"
3/4"1 3/4" 1/8"
3/4"2" 1/8"
3/4"2 3/4" 1/8"
3/4"1" 1/8"
1919 3
1925,4 3
1928,58 3
1931,75 3
1938,10 3
1944,45 3
1950,80 3
1953,5 3
Cam mod.701*
Cam mod.702*
Cam mod.703*
Cam mod.704*
Cam mod.705*
Cam mod.706*
Cam mod.707*
Cam mod.708*
Vertical hole
Dimension
A B C
3/4"3/4" 1/8"
3/4"1 1/8" 1/8"
3/4"1 1/4" 1/8"
3/4"1 1/2" 1/8"
3/4"1 3/4" 1/8"
3/4"2" 1/8"
3/4"2 3/4" 1/8"
Cam mod.601*
Cam mod.602*
Cam mod.603*
Cam mod.604*
Cam mod.605*
Cam mod.606*
Cam mod.607*
Cam mod.608*
Horizontal hole
3/4"1" 1/8"
1919 3
1925,4 3
1928,58 3
1931,75 3
1938,10 3
1944,45 3
1950,80 3
1953,5 3
c
A
B
c
A
B
5,5
5,5
Re-Programmable Cylinder Locks
VERTICAL HOLE
*Production on request.
HORIZONTAL HOLE
2 - 46
-
CD
A
B
CD
A
B
Dimension
A B C
3/4"1 1/2" 1/8"
3/4"1 5/8" 1/8"
3/4"2 1/2" 1/8"
3/4"1 1/8" 1/8"
3/4"1 1/2" 1/8"
1938,1 3
1938,1 3
1941,28 3
1963,50 3
1928,58 3
D
1/8"
1/4"
1/4"
7/16"
1/4"
3
6,35
6,35
6,35
11,11
Vertical Hole
Cam mod.710*
Cam mod.711*
Cam mod.712*
Cam mod.713*
Cam mod.714*
Dimension
A B C
3/4"1 1/2" 1/8"
3/4"1 5/8" 1/8"
3/4"2 1/2" 1/8"
3/4"1 1/8" 1/8"
Horizontal hole
3/4"1 1/2" 1/8"
1938,1 3
1938,1 3
1941,28 3
1963,50 3
1928,58 3
D
1/8"
1/4"
1/4"
7/16"
1/4"
3
6,35
6,35
6,35
11,11
Cam mod.610*
Cam mod.611*
Cam mod.612*
Cam mod.613*
Cam mod.614* 5,5
5,5
mod. Spes 10 5,20
mod. Spes 11 2,60
Re-Programmable Cylinder Locks
*Production on request.
2 - 47
SPACER
22 (.866)
19 (.750)
A
A
1/16"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
mod. Spes 01
mod. Spes 02
mod. Spes 03
mod. Spes 04
mod. Spes 05
mod. Spes 06
mod. Spes 07
mod. Spes 08
1/8"
1,6
3,18
4,76
6,35
7,94
9,53
11,11
12,70
5/8" mod. Spes 09 15,88
Re-Programmable Cylinder Locks
MODEL 4003 (Closure without spring)
MODEL 4010
*Production on request minimum 400 units.
MODEL 4000
2 - 48
LOCKS for T-handles
Available in the series:
S Security
HS High Security (All the HS series is made on request).
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
120 Degrees
Re-Programmable Cylinder Locks
MODEL 4012
MODEL 4013
*Production on request minimum 400 units.
MODEL 4011
2 - 49
LOCKS for T-handles
Available in the series:
S Security
HS High Security (All the HS series is made on request).
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
120 Degrees
Re-Programmable Cylinder Locks
MODEL 4016
*Production on request minimum 400 units.
MODEL 4014 (With the back closing pin in steel AVP)
2 - 50
LOCKS for T-handles
Available in the series:
S Security
HS High Security (All the HS series is made on request).
LOCKED
OPEN/CHANGE
LOCKED
OPEN/CHANGE
Clockwise Rotation
120 Degrees
steel
Re-Programmable Cylinder Locks
2 - 51
*Production on request minimum 400 units.
MODEL 001
MODEL 002
" T"-HANDLE
Re-Programmable Cylinder Locks
*Production on request.
PADLOCKS SERIES 900
3 - 1
17,5
Ø 5
C
37
16
31,5
RIELDA
R
17,5
Ø 8
29
50
C4
1
RIELDA
R
mod. 900-31.5/40 Steel 40
mod. 900-31.5/15 Steel 15
DimensionC
ShackleModel
Steel
Steel
DimensionC
ShackleModel
mod. 900-50/90 90
mod. 900-50/29 29
Clockwise Rotation
140 Degrees
LOCKED
OPEN/ CHANGE
LOCKED
OPEN/ CHANGE
Clockwise Rotation
132 Degrees
Re-Programmable Cylinder Locks
*Production on request.
PADLOCKS SERIES 900
3 - 2
35
60 19,5
Ø10
C43
35
70 22
Ø12
C50
LOCKED
OPEN/ CHANGE
LOCKED
Clockwise Rotation
132 Degrees
19,5
Ø10
35
60
C43
RIELDA
R
35
70
C50
RIELDA
R
22
Ø12
Steel
Steel
DimensionC
ShackleModel
Model Shackle DimensionC
mod. 900-60/120 120
mod. 900-60/35 35
mod. 900/70 43Steel
OPEN/ CHANGE
Re-Programmable Cylinder Locks
*Production on request.
PADLOCKS SERIES 900
3 - 3
35
60 19,5
Ø10
C43
35
70 22
Ø12
C50
18
Ø 5
LOCKED
OPEN / CHANGE
Clockwise Rotation
140 Degrees
mod. 900-25 Steel with extractable shackle
ShackleModel Characteristic
*Production on request.
PADLOCKS SERIES 800
3 - 4
Re-Programmable Cylinder Locks
37,537,5 22,5
12
97,5
29,9
30
70
2119
31 1
011,4
87
2719
31 1
011,4
95 30
70
MODEL 800-30 HS
MODEL 801-87 HS
MODEL 801-95 HS
Clockwise Rotation
90 Degrees
Clockwise Rotation
180 Degrees
OPEN/ CHANGE
LOCKED
OPEN/ CHANGE
LOCKED
OPEN/ CHANGE
LOCKED
Re-Programmable Cylinder Locks
EUROPEAN PROFILE CYLINDERS SERIES 1100
4 - 1
CHANGE
17.1
10.1
46
13
L
M 5
10
A B
33,1
Description Sizes
L A B
mod. 1100 S 40/43 4083 43
mod. 1100 S 35/50 3585 50
mod. 1100 S 40/45 4085 45
mod. 1100 S 45/40 4585 40
mod. 1100 S 50/35 5085 35
mod. 1100 S 55/31 5586 31
mod. 1100 S 31/55 3186 55
mod. 1100 S 43/43 4386 43
mod. 1100 S 45/43 4588 43
mod. 1100 S 55/35 5590 35
mod. 1100 S 35/55 3590 55
mod. 1100 S 40/50 4090 50
mod. 1100 S 45/45 4590 45
mod. 1100 S 50/40 5090 40
mod. 1100 S 60/31 6091 31
mod. 1100 S 31/60 3191 60
mod. 1100 S 50/43 5093 43
mod. 1100 S 60/35 6095
mod. 1100 S 40/55 4095 55
mod. 1100 S 45/50 4595 50
35
mod. 1100 S 31/31 3162 31
mod. 1100 S 35/31 3566 31
mod. 1100 S 31/35 3166 35
mod. 1100 S 35/35 3570 35
mod. 1100 S 40/31 4071 31
mod. 1100 S 31/40! 3171 40
mod. 1100 S 43/31 4374 31
mod. 1100 S 31/43 3174 43
mod. 1100 S 40/35 4075 35
mod. 1100 S 35/40 3575 40
mod. 1100 S 45/31 4576 31
mod. 1100 S 31/45 3176 45
mod. 1100 S 43/35 4378 35
mod. 1100 S 35/43 3578 43
mod. 1100 S 45/35 4580 35
mod. 1100 S 35/45 3580 45
Description Sizes
L A B
mod. 1100 S 43/35 4378 35
mod. 1100 S 35/43 3578 43
mod. 1100 S 50/31 5081 31
mod. 1100 S 31/50 3181 50
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
Rotation
360 Degrees
Re-Programmable Cylinder Locks
EUROPEAN PROFILE CYLINDERS SERIES 1100
4 - 2
CHANGE
17.1
10.1
46
13
L
M 5
10
A B
33,1
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
Rotation
360 Degrees
Sizes
L A B
mod. 1100 S 70/40 70110 40
mod. 1100 S 80/31 80111 31
mod. 1100 S 31/80 31111 80
mod. 1100 S 70/43 70113 43
mod. 1100 S 80/35 80115 35
mod. 1100 S 40/80 40120 80
mod. 1100 S 80/40 80120 40
mod. 1100 S 99/31 31130 99
mod. 1100 S 31/99 99130 31
mod. 1100 S 50/45 5095 45
mod. 1100 S 55/40 5595 40
mod. 1100 S 65/31 6596 31
mod. 1100 S 55/43 5598 43
mod. 1100 S 65/35 65100 35
mod. 1100 S 35/65 35100 65
mod. 1100 S 40/60 40100 60
mod. 1100 S 45/55 45100 55
mod. 1100 S 50/50 50100 50
mod. 1100 S 55/45 55100 45
mod. 1100 S 60/40 60100 40
mod. 1100 S 60/31 60101 31
mod. 1100 S 31/70 31101 70
mod. 1100 S 60/43 60103 43
mod. 1100 S 70/35 70105 35
mod. 1100 S 65/43 65108 43
Description Sizes
L A B
mod. 1100 S 40/70 40110 70
mod. 1100 S 50/60 50110 60
mod. 1100 S 55/55 55110 55
mod. 1100 S 60/50 60110 50
Re-Programmable Cylinder Locks
EUROPEAN PROFILE CYLINDERS SERIES 1200
4 - 3
CHANGE
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
Rotation
360 Degrees
L
M 5
10
A B17.1
10.1
33,1
mod. 1200 S 31/31 3162 31
mod. 1200 S 31/35 3166 35
mod. 1200 S 35/35 3570 35
mod. 1200 S 31/40 3171 40
mod. 1200 S 31/43 3174 43
mod. 1200 S 35/40 3575 40
mod. 1200 S 31/45 3176 45
mod. 1200 S 35/45 3580 45
mod. 1200 S 40/40 4080 40
mod. 1200 S 31/53 3184 53
mod. 1200 S 30/50 3585 50
mod. 1200 S 40/45 4085 45
mod. 1200 S 31/55 3186 55
mod. 1200 S 35/55 3590 55
mod. 1200 S 40/50 4090 50
mod. 1200 S 31/50 3181 50
Description Sizes
L A B
mod. 1200 S 45/45 4590 45
mod. 1200 S 31/60 3191 60
mod. 1200 S 40/55 4095 55
mod. 1200 S 45/50 4595 50
mod. 1200 S 35/65 35100 65
mod. 1200 S 40/60 40100 60
mod. 1200 S 45/55 45100 55
mod. 1200 S 50/50 50100 50
mod. 1200 S 31/70 31101 70
mod. 1200 S 40/70 40110 70
mod. 1200 S 50/60 50110 60
mod. 1200 S 55/55 55110 55
mod. 1200 S 31/80 31111 80
mod. 1200 S 40/80 40120 80
mod. 1200 S 31/99 31130 99
Description Sizes
L A B
Re-Programmable Cylinder Locks
EUROPEAN PROFILE CYLINDERS SERIES 1400
4 - 4
CHANGE
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
Rotation
360 Degrees
L
M 5
10
A B17.1
10.1
33,1
Desciption Sizes
A B
mod. 1400 S 31/9 3140 9
mod. 1400 S 35/9 3544 9
mod. 1400 S 40/9 4049 9
mod. 1400 S 43/9 4352 9
mod. 1400 S 48/9 4857 9
mod. 1400 S 50/9 5059 9
mod. 1400 S 60/9 6069 9
mod. 1400 S 65/9 6574 9
mod. 1400 S 70/9 7079 9
mod. 1400 S 80/9 8089 9
mod. 1400 S 95/9 95104 9
100 9mod. 1400 S 100/9 109
Re-Programmable Cylinder Locks
UK CYLINDERS SERIES 3100
4 - 5
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
17.6
31,6
46
13
10
A B
L
M 5
mod. 3100 S 31/31 3162 31
mod. 3100 S 35/35 3570 35
mod. 3100 S 45/45 4590 45
mod. 3100 S 40/40 4080 40
Description
L A B
CHANGE
Sizes
Rotation
360 Degrees
Re-Programmable Cylinder Locks
UK CYLINDERS SERIES 3200
4 - 6
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
CHANGE
Rotation
360 Degrees
17.6
31,6
10
A B
L
M 5
mod. 3200 S 31/31 3162 31
mod. 3200 S 35/35 3570 35
mod. 3200 S 45/45 4590 45
mod. 3200 S 40/40 4080 40
Description
L A B
Sizes
Re-Programmable Cylinder Locks
UK CYLINDERS SERIES 3400
4 - 7
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
CHANGE
Rotation
360 Degrees
17.6
31,6
10
A B
L
M 5
mod. 3400 S 31/9 3140 9
mod. 3400 S 35/9 3544 9
mod. 3400 S 45/9 4554 9
mod. 3400 S 40/9 4049 9
Description
L A B
Sizes
Re-Programmable Cylinder Locks
CYLINDER SERIES 3800
MODEL 3800 A*
4 - 8
17.6
31,6
17.6
31,6
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
SERIE 3800
MODEL 3800 B*
Available in the series S (Security) and HS (High Security) in brass or nickel finish.
*Production on request. .
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
MODEL 3800-143 HS
4 - 9
MODEL 3800-144 S
*Production on request. .
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 6000
4 - 10
*Production on request.
MODEL 6000 - 117* HS (outside cylinder)
MODEL 6000 - 118* S (inside cylinder)
MODELLO 6000 - 119*
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 6000
4 - 11
*Production on request.
MODEL 6000 - 120 HS*
MODEL 6000 - 121*
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
4 - 12
*Production on request.
External rose MCK 001 Internal Rose MCK 002
Thickness device2 mm
CK Protection
ACCESSORIES
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 1
*Production on request.
RIM MODEL 5000.1
RIM MODEL 5000 - 141
RIM MODEL 5000 - 142
CHANGE
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 2
*Production on request.
MORTISE CYLINDER MODEL 5003
32,1
34,4
DEADBOLT CYLINDER MODEL 5005.6
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 3
*Production on request.
DEADBOLT CYLINDER MODEL 5005.9
DEADBOLT CYLINDER MODEL 5006.6
CAMBIO
CAMBIO
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 4
*Production on request.
DEADBOLT CYLINDER MODEL 5006.9
KNOB MODEL 5008.1
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 5
*Production on request.
KNOB MODEL 5008.2
KNOB MODEL 5008.3
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 6
*Production on request.
KNOB MODEL 5008.6
KNOB MODEL 5009.4
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 7
*Production on request.
KNOB MODEL 5012
CHANGE
CHANGE
KNOB MODEL 5024.1
Rotation
360 Degrees
Re-Programmable Cylinder Locks
CYLINDER SERIES 5000
5 - 8
*Production on request.
KNOB MODEL 5024.2
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
SERIES 2000
6 - 1
*Production on request.
MODEL 2001
MODEL 2002 - YC
Description L B
mod. 2002- YC 50 2550
mod. 2002- YC 55 2555
mod. 2002- YC 60 2560
mod. 2002- YC 65 2565
mod. 2002- YC 70 2570
mod. 2002- YC 75 2575
mod. 2002- YC 80 2580
mod. 2002- YC 90 2590
mod. 2002- YC 100 25100
18,5
13,7 M 4X4
L
B
CHANGE
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
SERIES 2000
6 - 2
*Production on request.
MODEL 2000.15 CENTRAL
69,5 69,5
55,5
16,5
18,5
155
39
MODEL 2000.15 RIGHT
MODEL 2000.15 LEFT
CHANGE
CHANGE
CHANGE
69,569,5
69,569,5
16,5
18,5
155
16,5
18,5
155
39
39
45
45
Rotation
360 Degrees
Re-Programmable Cylinder Locks
SERIES 2000
6 - 3
MODEL 2101.15 CENTRAL
MODEL 2102.15 LEFT
CHANGE
69,5
69,5
155
40,7
5
18,5 16,5
39
RIELDA
69,5
69,5
69,5
28,7
54
0,7
5
39
55,5
22 C
15
5
55,5
*Production on request.
CHANGE
Rotation
360 Degrees
Re-Programmable Cylinder Locks
SERIES 2000
6 - 4
*Production on request.
MODEL 2010
MODEL 2011
CHANGE
OPEN / CHANGE
Rotation
360 Degrees
LOCKED
Re-Programmable Cylinder Locks
SERIES 2000
6 - 5
*Production on request.
MODEL 2020 (Useable with lock in three positions)
MODEL 2030 (Useable with lock in three positions)
LOCKEDCHANGE
CHANGE
Rotation
360 Degrees
LOCKED
Re-Programmable Cylinder Locks
SERIES 2000
6 - 6
*Production on request. .
MODEL 2040 (Useable with lock in three positions)
CHANGE
Rotation
360 Degrees
LOCKED
Re-Programmable Cylinder Locks
SERIES 2000
6 - 7
*Production on request.
MODEL 2050
18,5
13,7 M 4X4
18,5
13,7 M 4X4
MODEL 2051
CHANGE
CHANGE
CHANGE
CHANGE
Rotation
360 Degrees
LOCKED
LOCKED
LOCKED LOCKED
Re-Programmable Cylinder Locks
MODEL 645
MODEL 646 (ON-OFF Spring return)
*Production on request minimum 400 units.
MODEL 633
7 - 1
LOCKED
CHANGE90 Degrees
CHANGE
LOCKED45 Degrees
LOCKED 45 degrees
CHANGE 45 Degrees
LOCKED
LOCKED132 Degrees
SWITCH LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
Re-Programmable Cylinder Locks
MODEL 648 (ON-OFF Spring return)
*Production on request minimum 400 units.
MODEL 647
7 - 2
CHANGE 45 Degrees
LOCKED
LOCKED132 Degrees
CHANGE
LOCKED45 Degrees
LOCKED 45 degrees
SWITCH LOCKS
Available in the series:
S Security
HS High Security (All the HS series is made on request).
Re-Programmable Cylinder Locks
*Production on request.
CABINET SAFE
MODEL 3001
8 - 1
Sizes
A B C
mod. 3001 368245 300
B
C
A
LOCKED
OPEN/CHANGE
Clockwise Rotation
132 Degrees
Re-Programmable Cylinder Locks
LARGE LOCKS DISPLAY
9 - 1
SMALL LOCKS DISPLAY
The small locks display can be equipped with cam locks or european profile locks.