changing the world with nuts. it must be windy for wind energy, but i’m ok! high-speed trains need...
TRANSCRIPT
Changing the World with Nuts
SaperLock®
It must be windy for wind energy, but I’m OK!
High-speed trains need me, because I am very important and guarantee safety.
My name is SaperLockThanks to a special spring inside me, I don’t get loose despite extreme vibrations and shocks. Lets
have a look at where I am working.
No danger for the bridges, too!
And protect countless skyscrapers against earthquakes!!!
Without me, nobody could enjoy roller coasters!
Above the tower crane, you cannot imagine how difficult my job is, but I’m strong enough.
No extra labor cost!!!
About the Manufacturer
• Name: IMJIN ST Company c/o PanAmerica Supply, Inc.• Founded: 1972• Location: South Korea• Specialty: SaperLock® - Patented Locknut That
Does NOT Loosen• Quality: ISO9001• Certificate: NET (New Excellent Technology)• Test: Vibration Test NAS3350
What is a SaperLock®?
• SaperLock® is a newly developed nut that doesn’t loosen even under the most extreme of conditions, such as from constant vibrations, shocks, and quakes.
How?
• A spring is placed inside the nut. When one attempts to loosen the nut, the spring causes friction between the nut and bolt, making it impossible to undo.
• The nut can be undone only by holding down a lever on its side. This is easily accomplished using a standard socket available in any market and at any hardware store.
Why use SaperLock®?
Safety Simple and Easy to use No Damage to Bolt Reusable
Cost- Effective Passed NAS3350 Vibration Test NET Certified Patented Technology
GUARANTEED COST SAVING AND SAFETY
Cost - Effective
• Compared to the maintenance costs and manpower needed to retighten loose nuts, the price of SaperLock® is incredibly cheap.
• An investment in the present will result in a profit in the future!
GUARANTEED COST SAVING AND SAFETY
Specifications
• Approved by KS Standard• Material: SUS, S45C,
SCM415, SCM435, and others
• Plating: Zinc plate, Applied Plate, and Nickel Plate
• Size: M6~M42
Vibration Test: NAS3350
• Test Level (p-p): .045 in (+/-0.015)• Acceleration Peak: 20.7063G• Test Frequency: 30Hz (1800 Cycles/min)• Duration: 17 min. (30600 Cycles)• MIL-STD-1312, Test 7 Vibration Fixture
use• Tightening Torque: 745 Nm• Test Completed without Change of Nuts
Certifications and Patent Documents
• PanAmerica Supply, Inc.• 21414 Provincial Blvd. Katy, Texas 77450
• 281-646-8472 : Phone• 281-646-8474 : Fax
• Shaun Choi : [email protected] • Kevin Cho : [email protected]• Kenny Kwon : [email protected]