chapter 8 solutions a.definition a solution is a homogeneous mixture of two or more different...
DESCRIPTION
2. Covalent compounds sugar in water 3TRANSCRIPT
Chapter 8 Solutions
A. Definition • A solution is a homogeneous mixture of two or more different substances • only one phase• composition is variable• almost always clear (transparent)• A solution cannot be separated into its components by filtration
Solute – dissolved substance (smaller amount)Solvent – dissolving medium (larger amount)
Solutions can be in gas, liquid or solid phases
1
B. Types of solutions a) Solid – liquid
1. Ionic compoundNaCl in water NaCl Na+ + Cl- breaking of ionic bond
H2O
Hydration
Ion-dipole attraction
2
2. Covalent compounds
sugar in water
O OH
OH
OH
HO
HOH2C
H
OH
H
OH
H
O
H
HO
H 3
b. Liquid - liquid
C O H and H2OH
HH
(CH3OH)Polar polar
H OCH3
H OH
H O
CH3
Polar dissolves in polarNonpolar dissolves in nopolar
4
c. Gas – liquid All gases are slightly soluble in water
d. Gas-gas All mixtures of gases are solutions
e. Solid – solidCu (copper) in Au (gold) Alloy
Brass (Cu/Zn)
5
C. SolubilitySoluble – dissolves a large amountInsoluble – dissolves an negligible amount
Miscible – both components are liquid and can dissolve (mix) in any proportion
example: H2O and CH3OH
a) Solubility - # of grams that can be dissolved in 100 g of solvent at saturation (equilibrium)
6
Figure 8.3 In a saturated solution, the dissolved solute is in equilibrium with the undissolved solute.
Example:7
Table 8.1 Solubilities of Various Compounds in Water at 0oC, 50oC, and 100oC.
8
Unsaturated solution – dissolved amount less than solubility
Supersaturated solution - dissolved amount more than
solubilityAqueous solution – solution in water
9
D. Factors affecting solubility 1. Nature of solute and solvent
In general, for non-ionic solutes, “like dissolves like’.• polar solutes dissolve in polar solvents. • nonpolar solutes dissolve in nonpolar solvents.
Ionic compounds do not dissolve in nonpolar solvents
CH4 in water? NaCl in octane (nonploar)?
CH4OH in water?
HCl in water?
Examples
10
Solubility Guidelines for common Ionic Compounds in Water.1. All compounds containing group IA (Li+, Na+, K+, etc.) and
NH4+ are soluble in water.
2. All nitrates (NO3-) and acetates (CH3COO- or C2H3O-)
are soluble in water.
3. All chlorides (Cl-), bromides (Br-) and iodides (I-) are soluble in water except those of Ag+, Pb2+ and Hg2
2+.
4. All sulfates (SO42-) are soluble except
PbSO4, BaSO4, SrSO4 and CaSO4
5. All hydroxides (OH-) are insoluble except those of IA & Ca(OH)2, Sr(OH)2, Ba(OH)2
6. Most other ionic compounds are insoluble in water11
Li+, Na+, K+ and NH4+ soluble
NO3-, CH3COO- soluble
Cl- , Br-, I- soluble AgX, PbX2, Hg2X2.SO4
2- soluble PbSO4, BaSO4,CaSO4, SrSO4
OH- insoluble IA, Ca2+, Sr2+, Ba2+
Solubility except
K2SO4
NaCl
PbCl2
MgSO4
Soluble in water?
CaCO3
Fe(NO3)2
NH4MnO4
Soluble in water?
BaSO4
CuCr2O7
12
Which of the following would be expected to be the most soluble in water?
C C C
H
H
H
H
H
H
H
H
C C C
H
H
H
H
H
H
O
H
C C C
H
H
H
H
H
H
C
H
O
H
H
H
H
13
2. TemperatureGenerally, solubility increases as T increases, except for most gases in liquid where solubility decreases as T increases.
Example: O2 in water
14
15
3. Pressure (above the surface of the solution) Only affects solubility of gases in liquid.
Solubility increase as P increases.16
E. Concentrations of solutions - amount of solute in certain amount of solvent or solution.
a) % by mass (mass-mass %)
b) % by volume (V-V %)
17
Figure 8.7 When volumes of two different liquids are combined, the volumes are not additive.
18
Figure 8.8
Identical volumetric flasks are filled to the 50.0-mL mark with ethanol and
with water.
19
c) mass-volume %
d) parts per million (ppm)
e) parts per billion (ppb)
20
If an aqueous solution is 2.5 % w/v in aluminum sulfate, Al2(SO4)3, how many grams of aluminum sulfate are there in a liter of solution?
Examples
How many grams of zinc fluoride, ZnF2, are required to make a 5.00 % w/v aqueous solution in a 250 mL volumetric flask?
21
e) Molarity, M (molar concentration)
# of moles of solute/liters of solution
Example 10.50 mol KOH is dissolved in 2.0L of solution. Find the molarity.
1L
NaCl
1 mole NaCl1 M NaClsolution
22
Example 2How many grams of NaCl is needed to make 250 mL of a 0.50 M NaCl solution?
23
Example 3. Make a 500mL of 0.250 M K2Cr2O7 solutionMW of K2Cr2O7 = 294.2
24
F. Dilution
)(literVnM or MV = n
In general, C1V1 = C2V2, where C stands for concentration
M1V1 = M2V2
M2V2
M1V1
addwater
25
M1V1 = M2V2
Example 1. A 250 mL 2.0M NaOH solution is diluted to 1.0 L. What is the molarity of the final solution?
Example 2. What volume of a 5.0M HCl solution would be needed to prepare 2.0 L of a 0.25M HCl solution?
26
G. Colligative properties of solutionsA colligative property is a physical property of a solutionthat depends only on the concentration.
a) Lowering of vapor pressure
water
Next day
sugar in water
water
sugar in water
27
water
sugar in water
b) Elevation of the Boiling point
28
c) Freezing point (depression) lowering
Example: Antifreeze; salt-water.
29
H2O solution
Semi-permeable membrane
d) Osmosis and Osmotic pressure
Osmosis: the flow of solvent through a semipermeable membrane from a dilute to a more concentrated solution.At equilibrium, the molecules move back and forth at equal rates.
30
H2O solution
This measures the osmoticpressure of the solution
The process is called osmosisPressure applied to prevent osmosis = osmotic pressure
31
Copyright © Houghton Mifflin Company. All rights reserved. 8–15
Figure 8.15Osmotic pressure is the amount of pressure needed to prevent the solution in the tube from rising as a result of the process of osmosis.
32
V.P. lowering, B.P. elevation and F.P depression and osmotic pressure depend on the concentration of the solute particles but not on the type of solute.
Examples:
33
Example:1.5 mol of K2CrO4 is dissolved in 1000 g of water. What is the freezing point of the solution?
Freezing point (depression) lowering
mol of particle =
34
Osmolarity
NaCl Na+ + Cl-
1M NaCl 2 mol ions osmolarity = 2Mosmolarity = M x i
i = # of particles produced from the dissociation of one formula unit of solute
H2O
Osmolarity in cell = 0.31M (osmol)Osmolarity = 0.31M isotonic solution 5.0% m/v glucose 0.92% m/v NaCl (physiological saline solution) 35
36
Osmolarity = 0.31M isotonic solution
Osmolarity > 0.31M hypertonic solution
Osmolarity < 0.31M hypotonic solution
cell
crenation
Burst(hemolysis)
37
Red blood cell in
a) isotonic solution b) Hypertonic solution c) Hypotonic solution
crenation hemolysis
38
Example Consider the following solutions
1M sugar 2M NaCl 1.5M Na2SO4 1M Ca(NO3)2
solution
39
H. Colloidal dispersions A colloidal dispersion is a mixture in which a material is dispersed rather than dissolved.
. . . .
. . . .. . . .. . . .. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
dispersed phase
Dispersing medium
10-7 – 10-5cmCannot be filtered
40
Some proteins have size colloidal dispersion
solution colloidal dispersion
41
I. Dialysis
Dialyzing membrane - has pores large enough to allow some ions and small molecules to pass along with water and gases.
Kidney cells, blood capillaries, intestinal walls, etc. function as dialyzing membranes.
Dialysis - the movement of ions and small molecules (urea), including water (solvent), across a dialyzing membrane.
Large molecules such as proteins cannot pass through a dialyzing membrane.
42
Copyright © Houghton Mifflin Company. All rights reserved. 8–18
Figure 8.18 In dialysis, there is a net movement of ions from a region of higher concentration to a region of lower concentration. (a) Before dialysis. (b) After
dialysis.
Figure 8.18 In dialysis, there is a net movement of ions from a regionof higher concentration to a region of lower concentration.(a) Before dialysis. (b) After dialysis
43
Copyright © Houghton Mifflin Company. All rights reserved. 8–19
Figure 8.19 Impurities (ions) can be removed from a solution by using a dialysis procedure.
Impurities (ions) can be removed from a solution byusing a dialysis procedure.
44
Artificial kidney: a Hemodialysis Machine
45