chapter 9 gas power cycles. 9-1 basic considerations in the analysis of power cycles air standard...
Post on 21-Dec-2015
298 views
TRANSCRIPT
![Page 1: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/1.jpg)
CHAPTER
9
Gas Power Cycles
![Page 2: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/2.jpg)
9-1 Basic Considerations in the Analysis of Power Cycles
Air Standard Cycles
The Spark Ignition Engine
![Page 3: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/3.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-1Modeling is a powerful engineering tool that provides great insight and simplicity at the expense of some loss in accuracy.
![Page 4: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/4.jpg)
• Reciprocating internal combustion engines.
• Reciprocating compressors
• Reciprocating steam engines
General classes of engines
![Page 5: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/5.jpg)
Double action reciprocating engine.Double action reciprocating engine.
Single vs. double action engines
Single action reciprocating engineSingle action reciprocating engine.
![Page 6: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/6.jpg)
Indicator diagrams
An analog instrument that measures pressure vs. An analog instrument that measures pressure vs. Displacement in a reciprocating engine. The graph Displacement in a reciprocating engine. The graph is in terms of P and V.is in terms of P and V.
pp
VV
Area is proportional to the work done per cycle
![Page 7: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/7.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-2The analysis of many complex processes can be reduced to a manageable level by utilizing some idealizations.
![Page 8: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/8.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-6P-v and T-s diagrams of a Carnot cycle.
![Page 9: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/9.jpg)
9-2 The Caront Cycle and Its Value in Engineering
![Page 10: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/10.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-7A steady-flow Carnot engine.
![Page 11: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/11.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-8T-s diagram for Example 9–1.
![Page 12: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/12.jpg)
9-3 Air Standard Assumptions
• The working fluid is air, which continuously circulates in a closed loop and always behaves as an ideal gas.
• All the processes that make up the cycle are internally reversible.
• The combustion process is replaced by a heat-addition process from an external source.
• The exhaust process is replaced by a heat-rejection process that restores the working fluid to its initial state.
![Page 13: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/13.jpg)
9-4 An Overview of Reciprocating Engines
Air Standard Cycles
The Spark Ignition Engine
![Page 14: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/14.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-10Nomenclature for reciprocating engines.
![Page 15: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/15.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-11Displacement and clearance volumes of a reciprocating engine.
![Page 16: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/16.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-12The net work output of a cycle is equivalent to the product of the mean effective pressure and the displacement volume.
![Page 17: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/17.jpg)
Indicator Diagrams
Work per cycle is represented in terms of a Work per cycle is represented in terms of a mean effective pressuremean effective pressure and the displacement. and the displacement.
pp
VV
MEP = Mean effective pressureMEP = Mean effective pressure
X = DisplacementX = Displacement
![Page 18: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/18.jpg)
Indicator DiagramsTo compute the work per cycle, use the MEP and To compute the work per cycle, use the MEP and the displacement.the displacement.
Work = MEP x A x Displacement.Work = MEP x A x Displacement.
MEP = kMEP = kiiY, where kY, where kii is a constant is a constant
Y = the average ordinate on the indicator diagram.Y = the average ordinate on the indicator diagram.X = displacementX = displacementA = area of cylinder heat.A = area of cylinder heat.
YAkWork i
![Page 19: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/19.jpg)
Ideal indicator diagramSpark ignition engine - The Otto cycle
Processes:a-b Intakeb-c Compressionc-d Combustion (spark ignited)d-e Power Strokee-f Gas Exhaustb-a Exhaust Stroke
a b
c
d
e
pp
VV
Clearance volumeClearance volume
Displacement
![Page 20: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/20.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-13Actual and ideal cycles in spark-ignition engines and their P-v diagrams.
![Page 21: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/21.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-14Schematic of a two-stroke reciprocating engine.
![Page 22: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/22.jpg)
The spark ignition engine - The Otto cycle
![Page 23: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/23.jpg)
The Otto cycle
Displacement
The air standard Otto The air standard Otto cycle approximates the cycle approximates the automotive internal automotive internal combustion engine and combustion engine and aircraft engines.aircraft engines.Assume a quasistatic Assume a quasistatic process, isentropic process, isentropic compression, and compression, and isentropic exhaust.isentropic exhaust.
The air standard Otto The air standard Otto cycle approximates the cycle approximates the automotive internal automotive internal combustion engine and combustion engine and aircraft engines.aircraft engines.Assume a quasistatic Assume a quasistatic process, isentropic process, isentropic compression, and compression, and isentropic exhaust.isentropic exhaust.
pp
VV
1 6
3
4
5
s = Constant
2
![Page 24: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/24.jpg)
The Otto cycle
This is the T-s diagram forthe fixed mass system.
ssV = Constant
TT
6
3
4
5
2
pp
VV
1 6
3
4
5
P-V diagram for the actual variable masssystem.
s = Constant
2
![Page 25: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/25.jpg)
Real Process
• 1-2 Intake of fuel/air mixture at P1
• 2-3 Compression to P3
• 3-4 Combustion, V = cons. and increasing P
• 4-5 Expansion
• 5-6 Exhaust at constant V and falling pressure
• 6-1Exhaust at P1
Real Process
• 1-2 Intake of fuel/air mixture at P1
• 2-3 Compression to P3
• 3-4 Combustion, V = cons. and increasing P
• 4-5 Expansion
• 5-6 Exhaust at constant V and falling pressure
• 6-1Exhaust at P1
Air Cycle Approximation
(Constant mass, closed internally reversible, cycle)
• 2-3 Isentropic compression
• 3-4 Heat addition at constant volume
• 4-5 Isentropic expansion
• 5-6 Heat rejection at constant volume
Air Cycle Approximation
(Constant mass, closed internally reversible, cycle)
• 2-3 Isentropic compression
• 3-4 Heat addition at constant volume
• 4-5 Isentropic expansion
• 5-6 Heat rejection at constant volume
The air-standard Otto cycle
![Page 26: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/26.jpg)
The reversible Otto cycle
• Internally reversible processes• Constant specific heats
– k = Cp/Cv = Constant
• Polytropic compression and expansion, PVk = Const.• Treat air as an ideal gas.
![Page 27: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/27.jpg)
Thermodynamic analysis for the reversible Otto cycle
TT
6
3
4
5
2
V = Constantss
QH
QC
34
65
65
34
1
)(
)(
TT
TT
Q
TTCQ
TTCQ
H
CH
vL
vH
(1)
![Page 28: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/28.jpg)
Thermodynamic analysisfor the air-standard Otto Cycle
6
5
3
4
5
665
3
443
43
43
6543
ln,ln
T
T
T
T
T
TCs
T
TCs
T
dtC
T
Qs
ss
vv
v
path
rev
(2)
![Page 29: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/29.jpg)
Thermodynamic Analysisfor the air-standard Otto Cycle
1
4
5
5
4
1
3
2
2
332
6
5
3
4
k
k
v
v
T
T
v
v
T
Tss
T
T
T
T
![Page 30: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/30.jpg)
kv
k
vr
v
vr
v
v
T
T
T
TT
T
TT
T
T
T
T
1
3
6
1
6
3
3
6
6
65
3
34
6
5
3
4
1
11
Thermal efficiency
![Page 31: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/31.jpg)
Thermal efficiency
kv v
rv
vr 1
3
6 1
Key assumptions: (1) Internally reversible processesKey assumptions: (1) Internally reversible processes (2) Constant specific heats (2) Constant specific heats
Important consequence: (1) Efficiency is independent ofImportant consequence: (1) Efficiency is independent of working fluidworking fluid (2) Efficiency independent of (2) Efficiency independent of temperaturestemperatures
![Page 32: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/32.jpg)
rv
Efficiency of Air Standard Otto CycleEfficiency of Air Standard Otto Cyclek = 1.3 = Ck = 1.3 = Cpp/C/Cvv
TT
WNET3
44
55
2,6
ss
QQHH
QQCC
![Page 33: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/33.jpg)
k = 1.3
k = 1.4
Air Standard Otto Cycle
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Pressure Ratio, Pv
Effici
ency
Series1Series2
![Page 34: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/34.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-16Thermal efficiency of the ideal Otto cycle as a function of compression ratio (k = 1.4).
![Page 35: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/35.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-18The thermal efficiency of the Otto cycle increases with the specific heat ratio k of the working fluid.
![Page 36: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/36.jpg)
The Otto cycle with real gases
• Variable specific heats.• Efficiency based on internal energies obtained from the gas tables
which take into account variable specific heats.
),,(
1
2
34
65
TOT
Hv m
QTr
uu
uu
TT
3
4
5
2,6
V = Constantss
QH
QC
![Page 37: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/37.jpg)
9-6 Diesel Cycle:
Air Standard Cycles
The Compression Ignition Engine
![Page 38: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/38.jpg)
The compression ignition engine - theDiesel cycle
![Page 39: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/39.jpg)
Air Standard CompressionIgnition Engine - The Diesel cycle
• An IC power cycle useful in many forms of automotive transportation, railroad engines, and ship power plants.
• Key assumptions are,– Constant specific heats, the ideal gas, and internally reversible processes.
![Page 40: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/40.jpg)
Ideal Indicator DiagramCompression Ignition Engine
Processes:Processes:a-b Intakea-b Intakeb-c Compressionb-c Compressionc-d Combustionc-d Combustiond-e Power Stroked-e Power Strokee-f Gas Exhauste-f Gas Exhaustb-a Exhaust Strokeb-a Exhaust Stroke
Processes:Processes:a-b Intakea-b Intakeb-c Compressionb-c Compressionc-d Combustionc-d Combustiond-e Power Stroked-e Power Strokee-f Gas Exhauste-f Gas Exhaustb-a Exhaust Strokeb-a Exhaust Stroke
Displacement
Clearance volumeClearance volume
a b
c d
e
pp
VV
![Page 41: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/41.jpg)
Ideal Indicator DiagramCompression Ignition Engine
Processes:Processes:a-b a-b Combustion Combustion (P = Const.)(P = Const.)b-c b-c ExpansionExpansion
(s = Const)(s = Const)c-d c-d Exhaust Exhaust
(V = Const)(V = Const)d-e d-e Exhaust Exhaust
(P = Const)(P = Const)e-d e-d Intake Intake
(P = Const)(P = Const)d-a d-a Compression Compression
(s = Const)(s = Const)
Displacement
Clearance volumeClearance volume
VV
a b
c
de
pp
![Page 42: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/42.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-21T-s and P-v diagrams for the ideal Diesel cycle.
![Page 43: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/43.jpg)
Advantages of the Diesel Cycle
• Eliminates pre-ignition of the fuel-air mixture when compression ratio is high.
• All heat transfer to a constant mass system.
![Page 44: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/44.jpg)
The air-standard compression ignition engine
ab
c
dV = ConstantV = Constant
p = Constantp = Constant
QQHH
QQCC
TT
ss
WWoutout
WWinin
![Page 45: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/45.jpg)
TT
)(
1
dcvC
abpH
H
C
TTCQ
TTCQ
Q
Q
)(
)(1
)(
)(1
ab
dc
abp
dcv
TTk
TT
TTC
TTC
Thermal efficiency of the air-Thermal efficiency of the air-standard Diesel cyclestandard Diesel cycle
ab
c
dV = ConstantV = Constant
p = Constantp = Constant
QQHH
QQCC
ss
![Page 46: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/46.jpg)
VV
Compression RatioCompression Ratio
Expansion RatioExpansion Ratio
Cut Off RatioCut Off RatioDisplacement
Clearance volumeClearance volume
a b
c
de
pp a
dv
v
vr
b
ce
v
vr
a
bc
v
vr
Key parameters forKey parameters forthe Diesel cyclethe Diesel cycle
![Page 47: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/47.jpg)
Thermal efficiency
a b
1
111
1c
kc
kv rk
r
r
Displacement
Clearance volumeClearance volume
c
de
pp
VV
![Page 48: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/48.jpg)
a bpp
cd
e
Displacement
Clearance volumeClearance volume
VV
Thermal EfficiencyThermal Efficiency
1
111
1c
kc
kv rk
r
r
Compression Ratio: rv vd
va
Expansion Ratio: re vc
vb
Cut Off Ratio: rc vb
va
Air-standard Diesel cycleAir-standard Diesel cycle
![Page 49: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/49.jpg)
• At rc = 1, the Diesel and Otto cycles have the same efficiency.– Physical implication for the Diesel cycle: No change in volume when heat
is supplied.
– A high value of k compensates for this.
• For rc > 1, the Diesel cycle is less efficient than the Otto cycle.
Important features of the Diesel cycle
![Page 50: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/50.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-22Thermal efficiency of the ideal Diesel cycle as a function of compression and cutoff ratios (k = 1.4).
![Page 51: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/51.jpg)
Efficiency Comparisons(Approximate)
rrvv
rc = 1
rc > 1
![Page 52: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/52.jpg)
• Efficiency is based on internal Efficiency is based on internal energies and enthalpies obtained energies and enthalpies obtained from the gas tables which take into from the gas tables which take into account variable specific heats.account variable specific heats.
ba
ba
hh
uu
1
Effect of variable specific heats
![Page 53: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/53.jpg)
Key terms and concepts
Air-standard Diesel CycleExpansion ratioPressure ratio
Cut of ratioCompression ignition
![Page 54: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/54.jpg)
Comparison of the Otto and Diesel cycles
![Page 55: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/55.jpg)
Comparison No. 1: (a) Same inlet state (P,V)Comparison No. 1: (a) Same inlet state (P,V) (b) Same compression (b) Same compression
ratio, rratio, rvv
(c) Same Q(c) Same QHH
Key factor: Constant volume heat addition of the Otto Key factor: Constant volume heat addition of the Otto cycle cycle vs. constant pressure heat addition of vs. constant pressure heat addition of the Diesel cycle.the Diesel cycle.
Comparison of the Otto and Diesel cycles
![Page 56: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/56.jpg)
VV
pp
b
c
d
a
DisplacementDisplacement
Otto cycle with a specified Otto cycle with a specified inlet condition at “a” with inlet condition at “a” with a given compression ratio a given compression ratio rrvv = v = vaa/v/vbb
Otto cycle with a specified Otto cycle with a specified inlet condition at “a” with inlet condition at “a” with a given compression ratio a given compression ratio rrvv = v = vaa/v/vbb
![Page 57: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/57.jpg)
VV
pp
b
c
c*
d*d
a
Displacement
Otto and Diesel cycles with same compression inlet conditions at “a” and thesame compression ratio, rv.
Otto and Diesel cycles with same compression inlet conditions at “a” and thesame compression ratio, rv.
![Page 58: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/58.jpg)
c
Diesel Cycle
1
111
1c
kc
kv rk
r
r
kv
r 11Otto Cycle
pp
b c*d*d
aVV
![Page 59: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/59.jpg)
First Law analysis of the heat addition process
WQdU Otto: Heat addition with V = 0 in process b c.
W = 0, and P and T increaseOtto: Heat addition with V = 0 in process b c.
W = 0, and P and T increase
Diesel: Heat addition with P = Constant in process b c*. dW > 0, and P and T lower that in the Otto cycle.
Diesel: Heat addition with P = Constant in process b c*. dW > 0, and P and T lower that in the Otto cycle.
![Page 60: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/60.jpg)
V = Const.V = Const.V = Const.V = Const.
TT
ss
d*
da
b
TTcc
TTc*c*P = Const.P = Const.P = Const.P = Const.
c c*
Otto CycleOtto CycleOtto CycleOtto Cycle
Diesel CycleDiesel CycleDiesel CycleDiesel Cycle
![Page 61: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/61.jpg)
TT
ss
d*da
b
Tc
Tc*c*
cThe areas under The areas under the process paths the process paths b b c and b c and b c* c* are equal under the are equal under the assumption ofassumption ofequal heat addition, equal heat addition, QQHH..
The areas under The areas under the process paths the process paths b b c and b c and b c* c* are equal under the are equal under the assumption ofassumption ofequal heat addition, equal heat addition, QQHH..
QQH,OttoH,Otto = Q = QH,DieselH,Diesel
QQHH
T-s diagrams for equal heat addition
![Page 62: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/62.jpg)
DIESELOTTO
When QWhen QHH and r and rvv are are
the same for both the same for both cycles,cycles,
TT
ss
d*da
b
TTcc
TTc*c* c*c
QQC,OttoC,Otto < Q < QC,DieselC,Diesel
Efficiency comparisons
![Page 63: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/63.jpg)
Comparison No. 2 is more practical when the “knocking”effect is considered. In the Otto cycle, about 11 atm are needed to achieve combustion with engine knock.
Comparison No. 2 is more practical when the “knocking”effect is considered. In the Otto cycle, about 11 atm are needed to achieve combustion with engine knock.
Comparison No. 2: (a) Same inlet state (P,V) (b) Same maximum P
(c) Same QH
Comparison of the Otto and Diesel cycles
![Page 64: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/64.jpg)
DIESEL OTTO
TT
ss
d*
d
a
b
b*
c*
V = Const.V = Const.
P = Const.P = Const.
cDiesel CycleDiesel CycleOtto CycleOtto Cycle
![Page 65: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/65.jpg)
Gas Power Systems - 3
The Dual Cycle
![Page 66: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/66.jpg)
The Dual cycle
• The dual cycle is designed to capture capture some of the advantages of both the Otto and Diesel cycles.
• It it is a better approximation to the actual operation of the compression ignition engine.
![Page 67: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/67.jpg)
pp
V
d
e
a
b cQQH,PH,P
QQH,VH,V
QQC,VC,V
The Dual cycleThe Dual cycle
s = Constants = Constant
![Page 68: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/68.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-23P-v diagram of an ideal dual cycle.
![Page 69: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/69.jpg)
pp
QQC,VC,V
)()(
)(1
)()(
)(1
bCab
ed
bCPabV
edv
TTkTT
TT
TTCTTC
TTC
VV
d
e
a
b cQQH,PH,P
QQH,VH,V
![Page 70: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/70.jpg)
)1(1
111
1cpp
kcp
kv rkrr
rr
r
a
bP
b
cc
a
ev
P
Pr
V
Vr
V
Vr
VV
d
e
a
b cQQH,PH,P
QQH,VH,V
![Page 71: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/71.jpg)
Gas Power Systems - 4
The Gas Turbine
![Page 72: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/72.jpg)
Overview
• Gas Turbines
– The Carnot cycle as an “air standard” cycle
• The Ericcson Cycle
• The Brayton Cycle
– The standard cycle
– The reheat cycle
– Inter-cooling
![Page 73: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/73.jpg)
• Long-haul automotive power.• Large aircraft flight envelopes• Commercial aircraft
• Altitude (30,000 to 40,000 ft)
• Long range and low specific fuel consumption (sfc)
• Moderate speed and thrust
The modern gas turbine cycle
![Page 74: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/74.jpg)
• Military aircraft• High altitude ( > 40,000 ft)
• Moderate range and high specific fuel consumption (sfc)
• High speed and large thrust
• Relevant cycles– The Ericsson and Brayton cycles
The modern gas turbine cycle
![Page 75: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/75.jpg)
General features of the aircraft gas turbine engine
Intake AirIntake AirIntake AirIntake Air
FuelFuelFuelFuel
CompressorCompressorCompressorCompressorTurbineTurbine
CombustorCombustorCombustorCombustor
Exhaust SectionExhaust SectionExhaust SectionExhaust Section
Compressor Drive Shaft, WCompressor Drive Shaft, WcompcompCompressor Drive Shaft, WCompressor Drive Shaft, Wcompcomp
![Page 76: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/76.jpg)
The air-standard turbine cycle
• Open system modeled as a closed system - fixed with fixed mass flow.
• Air is the working fluid.
• Ideal gas assumptions are applied.
• Approximate the combustor as the high temperature source.
• Internally reversible processes.
![Page 77: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/77.jpg)
Air Standard Air Standard Brayton CycleBrayton Cycle
Air Standard Air Standard Carnot CycleCarnot Cycle
Air Standard Air Standard Ericcson CycleEriccson Cycle
Ideal gas power cycles
![Page 78: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/78.jpg)
Air-standard Carnot cycle
![Page 79: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/79.jpg)
Employ the same assumptions as for the air-standard turbine cycle.Employ the same assumptions as for the air-standard turbine cycle.
TT
ss
pp11 pp22
pp33pp44
QQHH
QQCC
1
311T
T
T
T
H
C
4321 , PPPP
)1(
2
3
1
1
4
1
3
2
1
4
1
11
11
kk
kkkk
V
V
V
V
P
P
P
P
Air-standard Carnot cycle
![Page 80: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/80.jpg)
• Heat addition at constant temperature is difficult and costly.
– Work is required because fluid expands.
• Heat addition is limited because a large change in volume would imply a low mean pressure in the heat addition process.
– Frictional effects might become too great if the mean pressure is too low.
Limitations of the air-standard Carnot cycle
![Page 81: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/81.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-26T-s and P-v diagrams of Carnot, Stirling, and Ericsson cycles.
![Page 82: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/82.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-27The execution of the Stirling cycle.
![Page 83: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/83.jpg)
Air-standard Ericsson cycle
![Page 84: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/84.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-28A steady-flow Ericsson engine.
![Page 85: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/85.jpg)
• Constant pressure heat addition and rejection
• Constant temperature compression and expansion
Qb-c
The air-standard Ericsson cycle
vv
pp
a
b c
d
T = Constant
Qd-a
Qc-dQa-b
![Page 86: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/86.jpg)
The Air Standard Ericcson Cycle
The Air Standard Ericcson Cycle
vv
pp
a
b c
dQQd-ad-a
QQc-dc-dQQa-ba-b
QQb-cb-c T = Const.
ss
TT
ab
c d
QQd-ad-a
QQc-dc-d
QQa-ba-b
QQb-cb-c
P = ConstP = Const.
![Page 87: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/87.jpg)
Thermal EfficiencyEriccson Cycle
Thermal EfficiencyEriccson Cycle
QQb-cb-c
dccb
badc
Added
NET
WW
Q
W
pp
a
b c
d
T = Const.
QQd-ad-a
QQc-dc-dQQa-ba-b
WWc-dc-dWWa-ba-b
vv
![Page 88: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/88.jpg)
The Brayton cycle
![Page 89: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/89.jpg)
The Brayton Cycle
• Modern gas turbines operate on an open Brayton cycle.
– Ambient air is drawn at the inlet.
– Exhaust gases are released to the ambient environment.
• The air standard Brayton cycle is a closed cycle.
– All processes are internally reversible.
– Air is the working fluid and assumed an ideal gas.
![Page 90: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/90.jpg)
General features of the aircraft gas turbine engine
Intake AirIntake AirIntake AirIntake Air
FuelFuelFuelFuel
CompressorCompressorCompressorCompressorTurbineTurbine
CombustorCombustorCombustorCombustor
Compressor Drive Shaft, WCompressor Drive Shaft, WcompcompCompressor Drive Shaft, WCompressor Drive Shaft, Wcompcomp
Exhaust Gases &Exhaust Gases &Work Output,Work Output,WWturbturb
Exhaust Gases &Exhaust Gases &Work Output,Work Output,WWturbturb
![Page 91: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/91.jpg)
The open, actual The open, actual cycle for the gas cycle for the gas turbine.turbine.
The open, actual The open, actual cycle for the gas cycle for the gas turbine.turbine.
The closed, airThe closed, airstandard cycle standard cycle for the for the gas turbine.gas turbine.
The closed, airThe closed, airstandard cycle standard cycle for the for the gas turbine.gas turbine.
QQHH
QQLL
WWCOMPCOMP
WWTURBTURB
![Page 92: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/92.jpg)
• Isentropic compression to TH
• Constant pressure heat addition at TH
• Isentropic expansion to TC
• Constant pressure heat rejection at TC
The gas turbine processes
![Page 93: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/93.jpg)
1
2 3
4
Air Standard Air Standard Brayton CycleBrayton CycleAir Standard Air Standard Brayton CycleBrayton Cycle
QQHH
QQLL
WWCOMPCOMP
WWTURBTURB
pp
Vvv
1 4
32S = ConstantS = Constant
QQHH
QQCC
![Page 94: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/94.jpg)
ss11 = s = s22 ss33 = s = s44
Air Standard Brayton CycleAir Standard Brayton Cycle
pp22 = p = p33
pp11 = p = p44
TT
ss
1
4
3
2
QQHH
QQCC
VV
pp
Vvv
1 4
32
QQHH
QQCC
s = Constants = Constant
![Page 95: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/95.jpg)
Thermal efficiency of the ideal Brayton cycle
Thermal efficiency of the ideal Brayton cycle
23
1243 )(
hh
hhhh
Q
WW
H
inOUT
pp22 = p = p33
pp11 = p = p44
TT
ss
1
4
3
2
QQHH
QQCC
WWOUTOUT
WWININ
![Page 96: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/96.jpg)
Thermal EfficiencyIdeal Brayton Cycle
Thermal EfficiencyIdeal Brayton Cycle
kk
P
P)1(
1
21
For an ideal gas, h-h0 = Cp(T - T0). The compression and expansion process are polytropic with constant k.
pp22 = p = p33
pp11 = p = p44
TT
ss
1
4
3
2
QQHH
QQCC
WWOUTOUT
WWININ
![Page 97: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/97.jpg)
Cycle efficiency
• Ideal gas assumptions apply.
• All processes internally reversible
– Compressor and turbine efficiency are each 100%.
• Assume fuel added in the combustor is a small percent (mass or moles) of total flow, and thus air properties provide a good estimate of cycle performance.
![Page 98: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/98.jpg)
Gas Power Systems - 5
Real Turbine Performance
![Page 99: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/99.jpg)
Overview
• Internally irreversible Brayton cycles– Case study
• Real turbine performance
![Page 100: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/100.jpg)
Internally irreversible Brayton cycles
![Page 101: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/101.jpg)
• Internal irreversibility arises in each process of the open cycle.
• Compression (compressor efficiency)• Heat addition • Expansion (turbine efficiency)
Real cycle analysis - Brayton cycle
![Page 102: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/102.jpg)
Internal irreversibility will lowerInternal irreversibility will lowerwork output and decrease work output and decrease thermal efficiency. Greater thermal efficiency. Greater entropy production will also entropy production will also result.result.
Internal irreversibility will lowerInternal irreversibility will lowerwork output and decrease work output and decrease thermal efficiency. Greater thermal efficiency. Greater entropy production will also entropy production will also result.result.
23
1 4
pp11 = p = p44
T,hT,hpp22 = p = p33
ss
s3 = s4
2 4
1
3
4s
12 ss
![Page 103: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/103.jpg)
Case Study
![Page 104: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/104.jpg)
GivenGiven: Turbine and compressor efficiencies of : Turbine and compressor efficiencies of 80%, and the operating data as given below. No 80%, and the operating data as given below. No internal irreversibility in the combustor. internal irreversibility in the combustor. FindFind: For the actual cycle, the thermal efficiency, : For the actual cycle, the thermal efficiency, the ratio of Wthe ratio of Wcompcomp/W/Wturbturb and entropy production. and entropy production.
Case study
QQHH
QQCC
WWININ WWOUTOUT
aa
b’b’
d’d’
ccccTT
ssaa
bbb’b’
d’d’dd
![Page 105: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/105.jpg)
State T(R)
P(psia)
h(Btu/ lbm)
S0
(Btu/ lbmR)
a 530 15 126.7 0.5963
b 881 90 211.6 0.7191
b’ 967 90 232.7 0.7421
c 1700 90 422.6 0.8876
d 1059 15 255.7 0.7647
d’ 1192 15 289.3 0.7946
Note: Values of h and sNote: Values of h and soo are from the gas tables, and all are from the gas tables, and all initial data are supplied here but this is not necessarily initial data are supplied here but this is not necessarily the case in practice.the case in practice.
Note: Values of h and sNote: Values of h and soo are from the gas tables, and all are from the gas tables, and all initial data are supplied here but this is not necessarily initial data are supplied here but this is not necessarily the case in practice.the case in practice.
![Page 106: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/106.jpg)
Process h(Btu/lbm)
W(Btu/lbm)
Q(Btu/lbm)
s(Btu/lbmR)
a-b 84.9 -84.9 0 0a-b’ 106 -106 0 0.0230b’-c 189.9 0 189.9 0.1455c-d -166.9 166.9 0 0c-d’ -133.3 133.3 0 0.0299d’-a -162.6 0 -162.6 -.1983NET 0 27.3 0 0
Process CalculationsProcess Calculations
si j si jo R ln
Pj
Pi
Note:
TURB h
hs
, COMP hs
h
The pressure ratios for The pressure ratios for the isentropic and actual the isentropic and actual processes are the same, processes are the same, and therefore and therefore s = s = ssoo. .
The pressure ratios for The pressure ratios for the isentropic and actual the isentropic and actual processes are the same, processes are the same, and therefore and therefore s = s = ssoo. .
![Page 107: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/107.jpg)
Thermal Efficiency and Work RatioThermal Efficiency and Work Ratio
795.03.133
106
144.0189
3.27
189
1063.133
'
turb
comp
cb
netCYCLE
W
W
Q
W
Notice that here we have a high ratio of the work of compressionto that of expansion, which is typical in gas turbine systems. Thekey variable is the turbine inlet temperature, Tc, and this is to bemade as large a possible. Tc is limited by the material and turbineblade cooling capability.
Notice that here we have a high ratio of the work of compressionto that of expansion, which is typical in gas turbine systems. Thekey variable is the turbine inlet temperature, Tc, and this is to bemade as large a possible. Tc is limited by the material and turbineblade cooling capability.
![Page 108: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/108.jpg)
The entropy production rates are based on the application of the The entropy production rates are based on the application of the entropy entropy balance for an open systembalance for an open system to each process to each process inin the cycle. The heat addition the cycle. The heat addition and rejection processes are at the high and low temperatures respectively. and rejection processes are at the high and low temperatures respectively. Thus, these processes produce an Thus, these processes produce an entropy production from the external heat entropy production from the external heat transfer process that is not included in the above calculationstransfer process that is not included in the above calculations..
Entropy ProductionEntropy Production
![Page 109: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/109.jpg)
The Carnot Efficiency The Carnot Efficiency for the Cyclefor the CycleThe Carnot Efficiency The Carnot Efficiency for the Cyclefor the Cycle
68.0
1700
53011
H
CCarnot
T
T
144.0
QH, TH
QC, TC
(General cycle representation)
Here, the difference in the efficiencyHere, the difference in the efficiencycalculations indicates a high levelcalculations indicates a high levelof external entropy production.of external entropy production.
Here, the difference in the efficiencyHere, the difference in the efficiencycalculations indicates a high levelcalculations indicates a high levelof external entropy production.of external entropy production.
![Page 110: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/110.jpg)
Efficiency CurvesEfficiency Curves T,hT,h
p2 = p3
sS1 = S2 S3 = S4
2 4
1
3
s’2 s’4
p1 = p4
Pressure Ratio, p2/p1
22 44
TURB COMP 1
0.9
0.8
0.7
0.10.1
0.250.25
Brayton cycle efficiency is Brayton cycle efficiency is greatly dependent on the greatly dependent on the efficiencies of the turbineefficiencies of the turbineand compressor. The and compressor. The curves at the left are curves at the left are approximate.approximate.
Brayton cycle efficiency is Brayton cycle efficiency is greatly dependent on the greatly dependent on the efficiencies of the turbineefficiencies of the turbineand compressor. The and compressor. The curves at the left are curves at the left are approximate.approximate.
![Page 111: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/111.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-29An open-cycle gas-turbine engine.
![Page 112: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/112.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-30A closed-cycle gas-turbine engine.
![Page 113: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/113.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-31T-s and P-v diagrams for the ideal Brayton cycle.
![Page 114: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/114.jpg)
FIGURE 9-32Thermal efficiency of the ideal Brayton cycle as a function of the pressure ratio.
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
![Page 115: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/115.jpg)
Gas Power Systems - 6
Cycle Improvements
![Page 116: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/116.jpg)
Cycle Improvements
• Regeneration
– Reduces heat input requirements and lowers heat rejected.
• Inter-cooling
– Lowers mean temperature of the compression process
• Reheat
– Raises mean temperature of the heat addition process
![Page 117: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/117.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-33For fixed values of Tmin and Tmax , the net work of the Brayton cycle first increases with the pressure ratio, then reaches a maximum at rp = (Tmax /Tmin) k/[2(k – 1)], and finally decreases.
![Page 118: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/118.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-36The deviation of an actual gas-turbine cycle from the ideal Brayton cycle as a result of irreversibilities.
![Page 119: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/119.jpg)
The Brayton cycle with regeneration
![Page 120: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/120.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-38A gas-turbine engine with regenerator.
![Page 121: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/121.jpg)
WWOUTOUT
The standard Brayton cycle The standard Brayton cycle shown as an open cycle.shown as an open cycle.
WWININ11
3322
44
QQHH
Regeneration is Regeneration is accomplishedaccomplishedby preheating the by preheating the combustor aircombustor airwith the exhaustwith the exhaustgas from gas from the turbine.the turbine. WCOMP
443322
55
WTURB
11
QQHH
![Page 122: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/122.jpg)
xx44
11
33
22yy Internal heat transfer,Internal heat transfer,
States 2 - x.States 2 - x.
Internal heat transfer,Internal heat transfer,States 2 - x.States 2 - x.
QQCC
QQHH
ss
T,hT,h
The maximum benefit of regeneration is obtained whenThe maximum benefit of regeneration is obtained whenthe exhaust temperature Tthe exhaust temperature Tyy is brought to temperature is brought to temperature
TT2 2 by the regenerative heat exchanger.by the regenerative heat exchanger.
The maximum benefit of regeneration is obtained whenThe maximum benefit of regeneration is obtained whenthe exhaust temperature Tthe exhaust temperature Tyy is brought to temperature is brought to temperature
TT2 2 by the regenerative heat exchanger.by the regenerative heat exchanger.
![Page 123: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/123.jpg)
The ideal regenerator
The ideal regeneratorThe ideal regeneratorwill heat the combustionwill heat the combustionair up to Tair up to T44
43
12 )(1
hh
hhCYCLE
xx44
11
33
22yy
QQCC
QQHH
ss
T,hT,h
![Page 124: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/124.jpg)
33
The actual regenerator
Actual internal heat transfer takesActual internal heat transfer takesplace between States 2 - x’.place between States 2 - x’.
The effectiveness of the regenerator is The effectiveness of the regenerator is the actual heat transfer divided by the the actual heat transfer divided by the maximum possible heat transfer.maximum possible heat transfer.
)(
)(
)(
)(
24
2
24
'2
TT
TT
TTC
TTC x
p
xp
xx44
11
22yy
QQCC
QQHH
ss
T,hT,h
xy
![Page 125: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/125.jpg)
Thermal efficiency
xcycle
hh
hhhh
3
1243 )()(
Regeneration reducesRegeneration reducesnet heat inputnet heat input at the at thehigh temperature.high temperature.
xx44
11
22yy
QQCC
QQHH
ss
T,hT,h
xy
33
![Page 126: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/126.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-39T-s diagram of a Brayton cycle with regeneration.
![Page 127: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/127.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-40Thermal efficiency of the ideal Brayton cycle with and without regeneration.
![Page 128: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/128.jpg)
The Brayton cycle with inter-cooling
![Page 129: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/129.jpg)
The standard Brayton cycle with on stage of inter-cooling
44
5511
WWCOMPCOMPWWTURBTURB
QQHH 3377
66
![Page 130: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/130.jpg)
TT
ss11
7’7’77
66
5’5’55 444’4’
33
One stage of inter-cooling with turbine One stage of inter-cooling with turbine and compressor inefficiencies. and compressor inefficiencies. One stage of inter-cooling with turbine One stage of inter-cooling with turbine and compressor inefficiencies. and compressor inefficiencies.
![Page 131: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/131.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-42Comparison of work inputs to a single-stage compressor (1AC) and a two-stage compressor with intercooling (1ABD).
![Page 132: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/132.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-43A gas-turbine engine with two-stage compression with intercooling, two-stage expansion with reheating, and regeneration.
![Page 133: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/133.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-44T-s diagram of an ideal gas-turbine cycle with intercooling, reheating, and regeneration.
![Page 134: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/134.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-45As the number of compression and expansion stages increases, the gas-turbine cycle with intercooling, reheating, and regeneration approaches the Ericsson cycle.
![Page 135: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/135.jpg)
The Brayton cycle with reheat
![Page 136: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/136.jpg)
The re-heating of the fluid at an intermediateThe re-heating of the fluid at an intermediatepressure raises the enthalpy input to the cycle pressure raises the enthalpy input to the cycle without raising the temperature of the external without raising the temperature of the external thermal reservoir. thermal reservoir.
The re-heating of the fluid at an intermediateThe re-heating of the fluid at an intermediatepressure raises the enthalpy input to the cycle pressure raises the enthalpy input to the cycle without raising the temperature of the external without raising the temperature of the external thermal reservoir. thermal reservoir.
44
11
33
22
55
ss
T,hT,h
66
16QQc
5432 QQQH
![Page 137: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/137.jpg)
Example
![Page 138: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/138.jpg)
DescriptionDescription::In an air-standard gas turbine engine, air at 60In an air-standard gas turbine engine, air at 60oo F F and 1 atm enters the compressor with a pressure and 1 atm enters the compressor with a pressure ratio of 5:1. The turbine inlet temperature is ratio of 5:1. The turbine inlet temperature is 15001500oo F, and the exhaust pressure is 1 atm. F, and the exhaust pressure is 1 atm.
Determine the ratio of turbine work to Determine the ratio of turbine work to compressor compressor work and the thermal efficiency under the work and the thermal efficiency under the following operating conditions.following operating conditions.
This example compares several modifications to the basicThis example compares several modifications to the basicBrayton cycleBrayton cycle: multi-stage compression and expansion: multi-stage compression and expansionwith reheat, inter-cooling and regeneration.with reheat, inter-cooling and regeneration.
![Page 139: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/139.jpg)
Operating conditionsOperating conditions::(a) The engine operates on an ideal Brayton (a) The engine operates on an ideal Brayton cycle.cycle.
(b) The adiabatic efficiency of the turbine (b) The adiabatic efficiency of the turbine and compressor are 0.83 and 0.93, and compressor are 0.83 and 0.93, respectively.respectively.
(c ) The conditions of (b) hold and a (c ) The conditions of (b) hold and a regenerator with an effectiveness of 0.65 is regenerator with an effectiveness of 0.65 is introduced.introduced.
![Page 140: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/140.jpg)
Operating conditionsOperating conditions::(d) The conditions of (b) and (c ) hold, and an(d) The conditions of (b) and (c ) hold, and an inter-cooler that cools the air to 60inter-cooler that cools the air to 60oo F at a F at a constant pressure of 35 psia is added.constant pressure of 35 psia is added.
(e) The inter-cooler is removed and a re-heater(e) The inter-cooler is removed and a re-heaterthe heats the fluid to 1500the heats the fluid to 1500oo F at a constant F at a constant pressure of 35 psia is added.pressure of 35 psia is added.
(f) The conditions of (e) hold and the inter-(f) The conditions of (e) hold and the inter-cooler of (d) is put back.cooler of (d) is put back.
![Page 141: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/141.jpg)
AssumptionsAssumptions::
(1) All cycles operate on the air-standard (1) All cycles operate on the air-standard basis.basis.(2) Ideal gas(2) Ideal gas(3) Constant specific heats; k = constant, (3) Constant specific heats; k = constant, CCpp = 0.24 BTU/lbm-R, k = 1.40 = constant. = 0.24 BTU/lbm-R, k = 1.40 = constant.
(4) Internally reversible processes except (4) Internally reversible processes except where isentropic efficiency (adiabatic where isentropic efficiency (adiabatic efficiency) is less than one.efficiency) is less than one.(5) 1 atm = 14.7 psia. (5) 1 atm = 14.7 psia.
![Page 142: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/142.jpg)
SolutionSolution::(a) The engine operates as an ideal Brayton cycle.(a) The engine operates as an ideal Brayton cycle.
TT
ss11
22
33
44
2121
4343
1
3
4
3
4
TCh
TCh
P
P
T
T
p
p
k
k
State DataState P
(psia)T
(R)1 14.7 5202 73.5 8253 73.5 19604 14.7 1237
![Page 143: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/143.jpg)
Process Quantities hBTU/Lbm
QBTU/lbm
1-2 73.1 02-3 272.4 272.43-4 -173 04-1 -172 -172
Total 0.5 (~0) 100.32
Process quantitiesProcess quantities
![Page 144: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/144.jpg)
367.0)8251960)(24.0(
1.73173
37.21.73
173
1.73
173
32
2132
32
2143
32
21
43
2121
434343
h
hh
Q
WW
Q
W
W
W
W
W
lbmBTUhW
lbmBTUTTChW
netcycle
compressor
turbine
p
Process quantitiesProcess quantities
![Page 145: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/145.jpg)
(b) The adiabatic efficiency of the compressor and turbine(b) The adiabatic efficiency of the compressor and turbineare 0.83 and 0.92 respectively.are 0.83 and 0.92 respectively.
2121
4343
1
3
4
3
4
TCh
TCh
P
P
T
T
p
p
k
k
TT
ss11
22
33
442’2’
4’4’
83.0,92.0 compT
![Page 146: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/146.jpg)
RTW
W
RTT
TT
TT
TT
W
W
sturb
comp
scomp
1295
887
443,
43
1212
12
12
21
21,
State DataState P
(psia)T
(R)1 14.7 5202 73.5 8253 73.5 19604 14.7 1237
![Page 147: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/147.jpg)
State DataState P
(psia)T
(R)1 14.7 5202’ 73.5 8873 73.5 19604’ 14.7 1295
28.0)8871960)(24.0(
8.885.159
81.18.88
5.159
8.88
5.159
32
2143
32
2143
32
21
43
2121
434343
h
hh
Q
WW
Q
W
W
W
W
W
lbmBTUhW
lbmBTUTTChW
netcycle
compressor
turbine
p
![Page 148: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/148.jpg)
(c) The conditions of (b) hold, and a regenerator with(c) The conditions of (b) hold, and a regenerator withan effectiveness of 0.65 is introduced. an effectiveness of 0.65 is introduced.
4’4’
TT
ss
11
22
33
yy2’2’ xx
2121
4343
1
3
4
3
4
TCh
TCh
P
P
T
T
p
p
k
k
83.0
92.0
comp
T
RTTTT
TT
TT
x
x
1052
65.0)(
)(
242
'2'4
'2
![Page 149: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/149.jpg)
State DataState P
(psia)T
(R)1 14.7 520x’ 73.5 10523 73.5 19604’ 14.7 1295
37.0)10521960)(24.0(
8.885.159
81.18.88
5.159
8.88
5.159
3
2143
3
2143
3
21
43
2121
434343
xxx
netcycle
compressor
turbine
p
h
hh
Q
WW
Q
W
W
W
W
W
lbmBTUhW
lbmBTUTTChW
![Page 150: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/150.jpg)
(d) The conditions of (b) and (c ) hold, and an inter-cooler(d) The conditions of (b) and (c ) hold, and an inter-coolerthat cools the air to 60that cools the air to 60oo F at 35 psia is added. F at 35 psia is added.
520 R520 R
ss
3
TT
1
7’
6
5’ 4’
P = 35 psiaP = 35 psia
xx
yy
![Page 151: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/151.jpg)
520 R520 R
ss
3
TT
1
7’
6
5’ 4’
P = 35 psiaP = 35 psia
xx
yy
Compute TCompute T5’ 5’ ,T,T7’7’,,
and the actual and the actual temperature betweentemperature betweenstate 7’ and x duestate 7’ and x dueto regeneration (7”).to regeneration (7”).
Compute TCompute T5’ 5’ ,T,T7’7’,,
and the actual and the actual temperature betweentemperature betweenstate 7’ and x duestate 7’ and x dueto regeneration (7”).to regeneration (7”).
ss
![Page 152: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/152.jpg)
State DataState P
(psia)T
(R)1 14.7 5205 35 6675’ 35 6976 14.7 5207 73.5 6437’ 73.5 6687” 73.5 6163 73.5 19604’ 14.7 520x 73.5 1295y 14.7 888
RT
P
P
T
T k
k
6675
1
1
5
1
5
1515
1TTTT
![Page 153: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/153.jpg)
3T
1
7’
6
5’ 4’
P = 35 psiaP = 35 psia
xx
yy
ss
38.0)(
04.2
/78
/5.159
73
7651
43
TTC
W
W
W
lbmBTUWW
lbmBTUW
p
net
compressor
turbine
ss
![Page 154: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/154.jpg)
38.0(e) Eliminate inter-cooling but add one stage of reheat(e) Eliminate inter-cooling but add one stage of reheatto 1500to 1500oo F. F.
(f) Combine parts (d) and (e).(f) Combine parts (d) and (e).
28.2
40.0
Compressor
turbine
W
W
![Page 155: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/155.jpg)
Work RatioWt/Wc
Wt
(a) Ideal Cycle 0.37 2.37 173(b) Actual BasicCycle
0.28 1.81 160
(c) Actual BasicCylce andRegenerator ( =0.65)
0.37 1.18 160
(d) Actual Cyclewith Intercooling at35 psia to 60o F andpart (c)
0.38 2.04 160
(e) Actual BasicCycle with Reheat at35 psia and part (c)
0.38 2.02 178
(f) Parts (c ) ,(d), and(e) combined
0.40 2.28 178
Summary of resultsSummary of results::
![Page 156: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/156.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-48Basic components of a turbojet engine and the T-s diagram for the ideal turbojet cycle.
[Source: The Aircraft Gas Turbine Engine and Its Operation. © United Aircraft Corporation (now United Technologies Corp.), 1951, 1974.]
![Page 157: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/157.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-51Energy supplied to an aircraft (from the burning of a fuel) manifests itself in various forms.
![Page 158: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/158.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-52A turbofan engine.
[Source: The Aircraft Gas Turbine and Its Operation. © United Aircraft Corporation (now United Technologies Corp.), 1951, 1974.]
![Page 159: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/159.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-53A modern jet engine used to power Boeing 777 aircraft. This is a Pratt & Whitney PW4084 turbofan capable of producing 84,000 pounds of thrust. It is 4.87 m (192 in.) long, has a 2.84 m (112 in.) diameter fan, and it weighs 6800 kg (15,000 lbm).
Photo Courtesy of Pratt&Whitney Corp.
![Page 160: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/160.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-54A turboprop engine.
[Source: The Aircraft Gas Turbine Engine and Its Operation. © United Aircraft Corporation (now United Technologies Corp.), 1951, 1974.]
![Page 161: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/161.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
FIGURE 9-55A ramjet engine.
[Source: The Aircraft Gas Turbine Engine and Its Operation. © United Aircraft Corporation (now United Technologies Corp.), 1951, 1974.]
![Page 162: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/162.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-57Under average driving conditions, the owner of a 30-mpg vehicle will spend $300 less each year on gasoline than the owner of a 20-mpg vehicle (assuming $1.50/gal and 12,000 miles/yr).
![Page 163: CHAPTER 9 Gas Power Cycles. 9-1 Basic Considerations in the Analysis of Power Cycles Air Standard Cycles The Spark Ignition Engine](https://reader033.vdocument.in/reader033/viewer/2022061418/56649d565503460f94a33b42/html5/thumbnails/163.jpg)
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.FIGURE 9-62Aerodynamic drag increases and thus fuel economy decreases rapidly at speeds above 55 mph.
(Source: EPA and U.S. Dept. of Energy.)