chapter one : dali100. chapter two : parameter of dali100 2.1 input : 5v by usb ; maximum...
DESCRIPTION
Chapter Three : Computer Interface of DALI Software Installation Double-click to install the software in the assigned local disk, usually disk C ; During installation, you may be told to install“.net FrameWork3.5” , click “Agree” to install it. It takes about 5 minutes to finish the installation ; After installation, the icon can be shown on your computer desktop.TRANSCRIPT
Chapter One : DALI100
Chapter Two : Parameter of DALI100
• 2.1• Input : 5V by USB ; Maximum Current 500mA;• Output : 9.5-22.5V ; Maximum Current
250mA;• Power Consumption : <=2.5W;
Chapter Three : Computer Interface of DALI100
• 3.1 Software Installation• Double-click to install the software in
the assigned local disk, usually disk C ;• During installation, you may be told to
install“.net FrameWork3.5” , click “Agree” to install it. It takes about 5 minutes to finish the installation;
• After installation, the icon can be shown on your computer desktop.
Chapter Four : Use of the DALI100
• 4.1 Open the installed software of DALI master. Till Arp.16th, 2014, the latest version is 1.3, which can be saw on the title bar on the upper left corner of the software. Later we will study the interface.
• 4.2 DALI master界面
Title Bar
Function Sw
itch Interface
Operation and
Display Page USB
Connection
• 4.3 Interface Information• 4.3.1 Title Bar
shows the DALI Master software , version 1.3
• 4.3.2 Function Switch InterfaceControl : DALI dim and control pageGroup : DALI group setting pageScenes : DALI scene setting pageParameters : DALI main parameter setting pageARC command : DALI RGB static 、 dynamic control pageDali Commands : DALI command debug page
• 4.3.3 USB Connection “ ”indicates the USB is not connected; “ ”indicates the USB is connected;
• 4.4 Functions of the Function Switch Interface • 4.4.1 Control Page• (1)Address Choice combo box is used for
choosing DALI address.There are three DALI addresses to be selected ,namely : Broadcast Address , Group Address and Short Address. The“Address choice”offers the users Broadcast Address and Group Address , and Short Address is operated on the scanned device from the“DALI Device”.
Broadcast Address
Group Address
• (2)DALI Device Combo Box indicates the DALI device
DALI Master can at most connects 64 different address.
The Green background color shows the scanned address by “Scan” “Scan” scans all the
devices on the bus and allot each channel of each device a sole address.
“addr detect”scans out all the addresses of DALI devices on the bus
The Gray background color shows that the addresses that does not exit
• (2) Differences between Scan and Add detectAfter“Scan”is clicked, the originally
stored address will be erased, a random address alloted by DALI Master will take its place. The range of the random address will be among 0-63, possibly be the same with the original one, but in most cases, it will be changed.
“Addr. detect”will only shows the existance of the DALI device. If exists, the address will be shown with Yellow background color, without changing the original address.
• (2)The Interface of Scan and Addr detectThe purple color and blue color indicate certain
online DALI device is selected.
Scan
Addr detect
• (3) Modify short address combo box
Some addresses have been scanned out with the former operation , now users can allot a new address with clicking“Modify short address”. Users can click “Addr detect” to check if they have successfully modify the address.
• (4) Console Combo Box• After selecting any one of the three addresses,
users can operate the dimming function here.Bright a level
The minimum brightness
Turn off the lamp
Dim a level
The maximum brightness0-254 dimming level
100% brightness
75% brightness
50% brightness
25% brightness
0% brightness
Automatic shift of 16 scenes
Shift interval of the adjacent two scenesGo to the set scene
Dim a level and turn off
Turn on and bright a level
• (5)Status Combo BoxIt indicates the various status of the lamps.
• 4.4.2 Group Page
Address of the online device
Read the groups that certain channel of certain online device have joined in.
Save the groups that certain address has joined in.
• 4.4.3 Scene Page
Address Selection
Read the scene that online device has been set
Scene Setting
Save the scene that online device has been set
• 4.4.4 Parameter页面Address Selection
Brightness when power on
Brightness when failing dimming
Minimum dimmable brightness
Maximum dimmable brightness
Fade time
Fade rate
Read the parameter of online device
Set the parameter of online device
• 4.4.5 ARC command页面
RGB Address SettingColor Indication
Dynamic Color Adjustment
• 4.4.6 Dali commands
DALI Command Selection
DALI Address Selection
DALI Command Sending