Chemical Bonding Comparison of Properties

Ionic Compounds Covalent Compounds

Metals

Essential Questions

• Why/How do atoms combine with one another to form the vast array of chemical substances that exist?

• What is ionic, covalent and metallic bonding and how do the types of bonding determine properties of matter?

Properties of Matter

• Macroscopic properties of matter vary greatly due to the type of bonding

What is a chemical bond?

• An attractive force that holds two atoms together

• Can form by – The attraction of positive

ion to a negative ion or– The attraction of the

positive nucleus of one atom and the negative electrons of another atom

Bond

• the interaction between two or more atoms that allows them to form a substance different from the independent atoms.

• involves the outer (valence) electrons of the atoms.

• These electrons are – transferred from one atom to another or shared

between them.

Chemical Bond Energy Considerations

• A chemical bond forms when it is energetically favorable– when the energy of the bonded atoms is less than

the energies of the separated atoms. – Al + I2 https://www.youtube.com/watch?v=XBPqSuIN-3E

Bonding

• Chemical compounds are formed by the joining of two or more atoms.

• A stable compound occurs when the total energy of the combination has lower energy than the separated atoms.

• The bound state implies a net attractive force between the atoms ... a chemical bond.

Energy Changes in Bonding

• When bonds are formed, energy is released. • Demonstrations:

– Formation of an Ionic Compound: Mg + O2

– Formation of a Molecular Compound: S + O2

Breaking Bonds

• In order to break bonds energy must be added, usually in the form of heat, light, or electricity.

• Demonstration: Electrolysis of water • Demo: Decomposition of Nitrogen Triiodide• http://www.youtube.com/watch?v=z5vsQ8sPgX4

Three Types of Bonding

Metallic

Covalent

Ionic

Chemical Bonds

In chemical bonds, atoms • can either transfer or • share their valence

electrons.

When atoms transfer electronsIonic Bonds

When one or more atoms lose electrons and other atoms gain them in order to produce a noble gas electron configuration, the bond is called an ionic bond.

Ionic Bonding

• metallic atoms tend to lose electrons• When they do so, they become positively charged ions

which are called cations. • Nonmetallic atoms tend to gain electrons to become

negatively charged ions which are called anions. • These oppositely charged cations and anions are attracted

to one another because of their opposite charges. • That attraction is called an ionic bond. We often refer to

the charge on the ion as the oxidation state of that element.

Negative Ion (Anion) Formation• Na has one valence electron. • It loses it to Chlorine. • Na now has a filled valence shell.

(an octet)• Becomes positive one in charge • Chlorine has seven valence

electrons. • It gains one electron from Na. • Chlorine now has filled octet. • Chlorine has a negative one

charge. (Chloride ion)• Na+1 attracts Cl-1 and forms the

ionic bond.

Positive Ion (Cation) Formation

Ionic Bonds• Part 1

– http://www.youtube.com/watch?v=Qf07-8Jhhpc

• Part 2– http://www.youtube.com/watch?v=5EwmedLuRmw

• Part 3– http://www.youtube.com/watch?v=RkZNYuSho0M

Ion Formation

• All of the elements in Group I have one electron in their outermost energy level.

• All of these elements can lose that one valence electron.

• These atoms become cations with a positive one charge.

• Elements in Group II have two electrons in their outermost energy level.

• So, when these elements lose electrons, they lose two electrons and take on a positive two charge.

• The transition metals and the metals to the right of them generally form more than one ion.

• We call these elements multivalent. The charges on their ions are not always predictable, although some patterns do exist.

• A few of the transition elements form only one ion or oxidation state. For example zinc ion, silver ion and scandium ion.

• Zn2+ zinc ion• Ag+ silver ion• Sc3+ scandium ion

Anions• Nonmetals tend to gain electrons.• The halogens - fluorine, chlorine, bromine, and iodine - have a strong

attraction for electrons. • Their outermost energy levels are almost full. There is only room for one

more electron in the outer energy levels for each of those atoms. Consequently, the elements fluorine, chlorine, bromine, and iodine will gain one electron, and become anions with a negative one charge.

• Oxygen, sulfur, and the other elements in that family will gain two electrons.

• In the next group over, nitrogen, phosphorus and arsenic can take on three electrons.

+2

+1

+3 -3 -2 -1

Ionic Nomenclature

• Naming Ionic Compounds• Video of the Process

– http://www.youtube.com/watch?v=URc75hoKGLY

Ionic Compounds

• Made of cations and anions• Metals and nonmetals• The electrons lost by the cation are gained by

the anion• The cation and anions surround each other• Smallest ratio of ions in an ionic compound is

a FORMULA UNIT.

K+1

Ca+2 Has lost two electrons

Cations

• Positive ions• Formed by losing electrons• More protons than electrons• usually Metals

Has lost one electron

Anion

• A negative ion• Has gained electrons• Non metals• Charge is written as a super script on the

right.

F-1 Has gained one electron

O-2 Has gained two electrons

Formula Unit

• The smallest whole number ratio of atoms in an ionic compound.

• Ions surround each other so you can’t say which is hooked to which

Naming Ions

• We will use the systematic way• Cation- if the charge is always the same just

write the name of the metal• Transition metals can have more than one

type of charge• Indicate the charge with a Roman numeral in

parentheses

Name these

Na+1 Ca+2 Al+3 Fe+3 Fe+2 Pb+2 Li+1

Write Formulas for these

• Potassium ion

• Magnesium ion

• Copper (II) ion

• Chromium (VI) ion

• Barium ion

• Mercury (II) ion

Naming Anions

• Change the element ending to – ide• F-1 Fluorine

Name these

Cl-1

N-3

Br-1

O-2

Ga+3

Write these

• Sulfide ion• iodide ion• phosphide ion• Strontium ion

Polyatomic ions

• Groups of atoms that stay together and have a charge

• You must memorize these or use an ion sheet… common examples– Acetate C2H3O2

-1

– Nitrate NO3-1

– Nitrite NO2-1

– Hydroxide OH-1

– Permanganate MnO4-1

– Cyanide CN-1

More Polyatomic ions• Sulfate SO4

-2

• Sulfite SO3-2

• Carbonate CO3-2

• Chromate CrO4-2

• Dichromate Cr2O7-2

• Phosphate PO4-3

• Phosphite PO3-3

• Ammonium NH4+1

Practice with Ions

• Use the practice worksheet to determine the ions formed.

• Learn to use your periodic table and pink sheet to determine charges (oxidation state.)

Binary Ionic Compounds• Binary Compounds

– 2 elements.– a cation and an anion.

• To write the names just name the two ions.– Easy with Representative elements

• Groups 1, 2, 13• NaCl = Na+ Cl- = sodium chloride

• MgBr2 = Mg+2 Br- = magnesium bromide

Naming Binary Ionic Compoundswith Variably Charged Cations

The problem comes with the transition metals (Groups 3-12) since their charge can vary

Need to figure out their chargesThe compound must be neutralsame number of + and – charges.Use the anion to determine the charge on the

positive ionCharge of the cation is a Roman numeral in

the name

Example• Write the name of CuO• Need the charge of Cu• O is -2• copper must be +2• Copper (II) chloride

Example

• Name CoCl3

• Cl is -1 and there are three of them = -3• Co must be +3 Cobalt (III) chloride

Another Example • Write the name of Cu2S.• Since S is -2, the Cu2 must be +2, so each one

is +1.• copper (I) sulfide

Last Example

• Fe2O3

• Each O is -2 3 x -2 = -6• 3 Fe must = +6, so each is +2.• iron (III) oxide

Naming Binary Ionic CompoundsWrite the names of the followingKCl

Na3N

CrN

Sc3P2

PbO

PbO2

Na2Se

Ternary Ionic Compounds Will have polyatomic ionsAt least three elementsName the ions

NaNO3

CaSO4

CuSO3

(NH4)2O

Ternary Ionic Compounds

• LiCN

• Fe(OH)3

• (NH4)2CO3

• NiPO4

Writing FormulasGiven the name write the formula

1. The charges have to add up to zero2. Write down each ion with charges3. Make the charges equal by adding subscripts4. Put polyatomic ions in parentheses if you

need more than one of them

Writing Formulas Example

• Write the formula for calcium chloride.

Another Example

• Aluminum nitrate

Write the formulas for these

Lithium sulfidetin (II) oxidetin (IV) oxideMagnesium fluorideCopper (II) sulfateIron (III) phosphide

Write the formulas for these

• gallium nitrate

• Iron (III) sulfide

• Ammonium chloride

• ammonium sulfide

• barium nitrate

Things to look for

• If cation has (Roman Numeral), the number is the charge

• If anions end in -ide they are probably off the periodic table (Monoatomic)

• If anion ends in -ate or -ite it is polyatomic

Ionic Solids • Ionic solids are solids composed of ionic

particles (ions). • These ions are held together in a regular

array by ionic bonding. • Ionic bonding results from attractive

interactions from oppositely charged ions. • In a typical ionic solid, positively charged

ions are surrounded by negatively charged ions and vice-versa.

• The close distance between these oppositely charged particles results in very strong attractive forces.

• The alternating pattern of positive and negative ions continues in three dimensions.

• The regular repeating pattern is analogous to the tiles on a floor or bricks on a wall.

• called the crystal lattice.

Ionic Compounds• Crystalline solids

(made of ions) • High melting and

boiling points • Conduct electricity

when melted or dissolved in water – Demo: Electrolytes

• Many are soluble in water but not in non-polar liquid

Comparison of Conductivity

Common Ionic Compounds

– NaCl - sodium chloride - table salt

– KCl - potassium chloride - present in "light" salt (mixed with NaCl)

– CaCl2 - calcium chloride - driveway salt

– NaOH - sodium hydroxide - found in some surface cleaners as well as oven and drain cleaners

– CaCO3 - calcium carbonate - found in calcium supplements

– NH4NO3 - ammonium nitrate - found in some fertilizers

Ionic vs Molecular

• http://www.youtube.com/watch?v=PKA4CZwbZWU

Covalent (Molecular) Compounds

• Gases, liquids, or solids (made of molecules)

• Low melting and boiling points

• Poor electrical conductors in all phases

• Many soluble in non-polar liquids but not in water

Molecular (Covalent) Substances

Covalent Network Solids

• Covalent because combinations of nonmetals

• Interconnected • very hard and brittle• Insoluble• Extreme melting and

boiling pointsDiamond

Covalent Bonds• involve the sharing of a pair of valence

electrons by two atoms• Such bonds lead to stable molecules if

they share electrons in such a way as to create a noble gas configuration for each atom

Covalent bonding can be visualized with the aid of a Lewis Structure

Polar Covalent Bonds• Covalent Bonds in which the sharing of the

electron pair is unequal• the electrons spend more time around the

more nonmetallic atom• In such a bond there is a charge separation

with one atom being slightly more positive and the other more negative……. will produce a dipole moment.

Types of Covalent bonds

• Pure Covalent (also called non-polar covalent) bonds are ones in which both atoms share the electrons evenly• By evenly, we mean that the

electrons have an equal probability of being at a certain radius from the nuclei of either atom.

• Polar covalent bonds are ones in which the electrons have a higher probability of being in the proximity of one of the atoms

• Determined by Electronegativity Difference

Electronegativity• the periodic property that indicates

the strength of the attraction an atom has for the electrons it shares in a bond.

• Atoms with high electronegativities tend to hold tightly to their electrons or to form negative ions.

– These elements are found to the upper right on the periodic table.

• Atoms with low electronegativities tend to have a lower attraction for their electrons and may form positive ions.

– These elements are found to the lower left on the periodic table.

Pure covalent or Non-polar covalent bond

• Electronegativity difference of 0.3 or less in between the two atoms.

• A pure covalent bond can form between two atoms of the same element (such as in diatomic oxygen molecule)

• or atoms of different elements that have similar electronegativies (such as in the carbon and hydrogen atom in methane).

Polar Covalent Bond

• A is a pair of electrons shared between two atoms with significantly different electronegativities (from 0.3 to 1.7 difference).

• These bonds tend to form between highly electronegative non-metals and other non-metals, such as the bond between hydrogen and oxygen in water.

Ionic Bonds

• In compounds that have elements with very different electronegativities (greater than 1.7 difference), the electrons can be considered to have been transferred to form ions.

• Many of the properties of a compound, such as solubility and boiling point, depend, in part, on the degree of the polarity of its bonds.

Examples to Determine Bond Character

• Using electronegativity in the prediction of the polarity of a chemical bond.

• sodium bonded to chlorine – Difference between the electronegativities of Na(0.9) and

Cl(3.0) are so great that they form an ionic bond.

• The hydrogen molecule (2 H atoms bonded to each other)

• zero electronegativity difference, form a non-polar covalent bond.

Bond Character Bond Character

• Nonpolar-Covalent bonds (HNonpolar-Covalent bonds (H22))– Electrons are equally shared Electrons are equally shared – Electronegativity difference of 0 to 0.3Electronegativity difference of 0 to 0.3

• Polar-Covalent bonds (HCl)Polar-Covalent bonds (HCl)– Electrons are unequally shared Electrons are unequally shared – Electronegativity difference between .3 and 1.7Electronegativity difference between .3 and 1.7

• Ionic Bonds (NaCl)Ionic Bonds (NaCl)– Electrons are transferred Electrons are transferred – Electronegativity difference of more than 1.7 Electronegativity difference of more than 1.7

Diatomic Molecules

• hydrogen gas H2

• the halogens:– chlorine Cl2

– fluorine F2

– bromine Br2

– iodine I2

• Nitrogen N2

• Oxygen O2

Pneumonic Device to remember the diatomic molecules: Professor BrINClHOF

Metals and Metallic Bonding

• Typical Properties of Metals – Malleable– Ductile– Good Conductors of Heat and Electricity– Generally high melting and boiling points

Metallic Bonds

• The properties of metals suggest that their atoms possess strong bonds

• yet the ease of conduction of heat and electricity suggest that electrons can move freely in all directions in a metal

• The general observations give rise to a picture of "positive ions in a sea of electrons" to describe metallic bonding.

Metal Properties

• Malleable and Ductile• Strong and Durable• Good conductors of heat and electricity. • Their strength indicates that the atoms are difficult to

separate… strong bonds• but malleability and ductility suggest that the atoms are

relatively easy to move in various directions. • The electrical conductivity suggests that it is easy to move

electrons in any direction in these materials. • The thermal conductivity also involves the motion of

electrons. All of these properties suggest the nature of the metallic bonds between atoms. (Electron sea model)

Metallic Bonding Electron Sea Model

• Explained by the Electron Sea Model • the atoms in a metallic solid

contribute their valence electrons to form a “sea” of electrons that surrounds metallic cations.

• delocalized electrons are not held by any specific atom and can move easily throughout the solid.

• A metallic bond is the attraction between these electrons and the metallic cation.

•

Metallic Bonding the Electron Sea Model

• The more delocalized electrons the stronger the bond

• A mixture of elements that has metallic properties is called an alloy.

• Two types of alloys – An interstitial alloy is one in which the small holes

in a metallic crystal are filled by other smaller atoms.

– A substitutional alloy is one in which atoms of the original metal are replaced by other atoms of similar size.

Ionic Compounds Covalent Compounds Metallic Compounds

-Formed from a combination of metals and nonmetals. -Electron transfer from the cation to the anion. -Opposite charged ions attract each other.

-Formed from a combination of nonmetals. -Electron sharing between atoms.

-Formed from a combination of metals -“sea of electrons”; electrons can move among atoms

Solids at room temperature Can be solid, liquid, or gas at room temperature.

Solids at room temperature

High melting points Low melting points Various melting points

Dissolve well in water Do not dissolve in water (Sugar is an exception)

Do not dissolve in water.

Conduct electricity only when dissolved in water; electrolytes

Do not conduct electricity; non electrolytes

Conduct electricity in solid form.

Brittle, hard Soft Metallic compounds range in hardness. Group 1 and 2 metals are soft; transition metals are hard. Metals are malleable, ductile, and have luster.