V 10/12/19

Alkalinity out of balance

If the Alkalinity is too LOW, add alkalinity increaser (alkalinity up).If the Alkalinity is too HIGH, add pH decreaser (pH down).*

pH out of balance

If the pH is too LOW, add alkalinity increaser (alkalinity up). If the pH is too HIGH, add pH decreaser (pH down).*

Unbalanced spa water can damage your spa pumps and heaters.

Step 5: Water Balance

PH

Step 4: Test Water

.Do not use test strips to measure the chlorine level. Use the dosing instructions on the container to manage chlorine levels. Not following this could damage your spa.

The test strips should be used to measure pH and Alkalinity. Wait at least 20 minutes after applying any balancer chemicals before testing again.

Dose your spa with Spa Store Spa Chlorine. Use 6-10 grams per 1,000 litres of spa water. In the event of heavy spa use or water clarity issues, a shock dose of 25 grams per 1,000 litres of spa water can be used. See the label for the specific dosing instructions.Always pre-mix the chlorine with water in a bucket before adding it to the spa water.The literage of your spa is on the specification sheet for your spa.

Step 3: Water Treatment

Step 2: HeatHeat your spa pool to the desired temperature.

Fill your spa following the user manual instructions.Always fill your spa by removing a filter and putting the hose in the intake hole.

Step 1: Fill

* This product is not included in the chemical start kit. In the unlikely event that you require this product, please visit spastore.com.au or spastore.co.nz.

Chemical Quick Start Up Guide - Chlorine

IMPORTANT NOTE:

Weekly Maintenance: A.

B. Adjust pH, alkalinity and total hardness as per step 5in the quick start guide.

Monthly Maintenance:

instructions on the container.

cleaned.

4 - 6 monthly Maintenance:

Daily Maintenance:

* This product is not included in the chemical start kit. In the unlikely event that you require this product,please visit spastore.com.au or spastore.co.nz.

V 10/12/19

instructions on the container.

Regular Chemical Maintenance Guide

Dose with Spa Store Spa Chlorine.Ensure the spa cover is off and the pump is running.

Follow dosage and safety instructions on the container.The use of poor quality chemicals can lead to damage not covered by your spa warranty. Dont risk damage to your spa. Spa World authorised chemicals are avilable from:AU: www.spastore.com.au or NZ: www.spastore.co.nz

Test the water using the test strip following the instructions on the back of the test strip container.

Do not use the test strips to monitor chlorine levels. Use the daily dosing instructions on the back of the chlorine container instead. Failure to follow this can result in damage to your spa.

Remove the Purezone filter if one is being used. Add pipe degreaser to your spa following the instructions on the back of the container.Drain your spa by following the draining procedure in your user manual.Restart by following the start quide on the reverse page.