chereeki - bluetooth speaker user manualtime, otherwise it wi ll turn off automatically after a...
TRANSCRIPT
Bluetooth Speaker
User ManualPlease read before use
English Version....................................................................1-6
Deutsche Version...............................................................7-13
Versión en Español...........................................................14-19
Version Française.............................................................20-25
Versione Italiana..............................................................26-31
1 Interfaces and Keys
2 Operations
Power Key / Mode Switch
Short tap “+” to turn up the volume, “-” to turn down the volume. Short tap to play
previous song, to next song. Short tap / to Play / Pause / Answer phone call / Hang
up, long tap to disconnect Bluetooth connection, short tap again to resume Bluetooth
connection.
3 Bluetooth Connection for Cellphone
1. Press and hold power key for 3 seconds to turn on Bluetooth speaker.
2. Enable Bluetooth function on your cellphone, search “A8” and pair it.
1
3. If it requires password when pairing, please input “0000” to pair it (usually it will not require
password unless the cellphone’s Bluetooth version is 2.1 or earlier).
4. You will hear voice prompt to remind you they have been paired successfully.
4 Bluetooth Connection for Laptop
1. If your laptop needs a Bluetooth adapter, please make sure it is working. If it has Bluetooth
function itself, please enable it.
2. Go to Bluetooth panel on your laptop, search “A8” and pair it.
3. Reboot the Bluetooth speaker and it will connect to your laptop automatically with voice
prompt.
5 AUX Mode
Connect the Bluetooth speaker to a 3.5mm jack with the audio cable, and you can use it as
an ordinary speaker.
Note: Song switch will be unavailable when it is in AUX mode, but you can still use it to adjust
volume.
6 TF Card Mode
Insert a TF card to the Bluetooth speaker and it will enter TF card mode automatically. You
can play the songs stored in the TF card.
7 Mode Switch
When the Bluetooth speaker is in Bluetooth Mode / AUX Mode / TF Card Mode, short press
power key to switch the mode.
2
8 Bluetooth Phone Call
Answer phone call: If you connected the Bluetooth speaker with a cellphone, you can short
tap / to answer the incoming phone call. Please close to the microphone during phone
calls.
Hang up: Short tap / to hang up.
Decline phone call: Long tap / to decline the incoming phone call.
Callback: Short tap / twice and it will call back the last dialed number.
9 Charge
Please use the USB cable to connect to a computer or adapter to charge it. You can charge it
in both power on status or power off status. The indicator light will stay on when it is charging
and turn off when it is fully charged.
10 Keypad Light
The keypad light will turn off to save power if there is no operation in 1 minute. Tap the key
and the light will turn on again.
11 Indicator Light
The indicator light will flash rapidly when it is waiting for Bluetooth connect, flash slowly when
it is in music playing, and stop flashing when you paused music playing.
12 Low Battery Remind
You will hear voice prompt when the Bluetooth speaker is in low battery. Please charge it in
3
time, otherwise it will turn off automatically after a while.
13 System Reset
If the Bluetooth speaker crashed because of improper operations or other reasons, please
use a toothpick or other nonmetal stick to insert to the reset hole to reset the Bluetooth
speaker. The reset hole is under the AUX jack.
14 FAQ
Q: Cannot turn on.
A: 1. Please check if it is out of power, and recharge it if it is necessary.
2. Please long press the power button to turn it on.
Q: Touch operation is not working.
A: 1. Please touch to operate it on the correction position.
2. Do not touch multiple keys at the same time.
Q: No sound when in Bluetooth mode.
A: Please check the Bluetooth connection, and make sure the Bluetooth device is playing
music. Please also make sure the Bluetooth device is not in silent mode and the volume is
normal.
Q: No sound when in AUX mode.
A: 1. Please check if the audio cable connected well.
2. Please make sure the Bluetooth speaker has switched to AUX mode.
Q: No sound when in TF card mode.
A: 1. Please check if the TF card installed well.
2. Please make sure the audio files are supported (wav format and mp3 format).
4
3. Please make sure the Bluetooth speaker has switched to TF card mode.
15 Specification
Working Voltage 3.7V Battery Capacity 1000mAh
Charging Voltage USB 5V 500mA SNR ≥80dB
Frequency 20-20KHz Distortion <1%
Speaker
Specification
40mm 4Ω 3W Dimension φ85x30mm
Working Distance ≤10m Charging Time About 2 hours
Playing Time About 4-6 hours Weight 185g
16 Note
1. Do not exposure it to high humidity, extreme high temperature or low temperature
environment over time.
2. Do not use any sharp object to get to the audio unit, which may cause irreparable damage.
3. Please charge it in time when it is in low battery.
4. Please charge it every 20 days if it is not used for a long time.
5. Please do not use it if any abnormality happens, such as heating up, smoking or smelly.
6. Disassembly only by the professionals.
17 Support
Thank you for your purchase! We are always striving to achieve your satisfaction and open
for new and improving thinking. If you have any questions or suggestions, please contact us
at any time and we will reply to you within 24 hours.
5
We would also appreciate reviews on Amazon or other platform to help us grow.
Email: [email protected]
Web: www.chereeki.com
Thank you!
Chereeki Customer Support
Facebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com
6
1 Schnittstellen und Tasten
2 Betrieb
Ein/Aus-Taste / Modusschalter
Drücken Sie kurz “+” um die Lautstärke zu erhöhen, “-” um die Lautstärke zu reduzieren.
Drücken Sie kurz um das vorherige Lied zu spielen, für das nächste Lied. Drücken Sie
kurz / zum Abspielen / Pause / Beantworten von Anrufen / Auflegen, drücken Sie lange
um die Bluetooth Verbindung zu deaktivieren; erneut kurz um die Bluetooth Verbindung
wieder herzustellen.
3 Bluetooth Verbindung für Mobiltelefon
1. Drücken und halten Sie die Ein/Aus-Taste für 3 Sekunden um den Bluetooth Lautsprecher
7
einzuschalten.
2. Aktivieren Sie die Bluetooth Funktion auf Ihrem Mobiltelefon, suchen Sie nach “A8” und
paaren Sie es.
3. Wenn bei der Paarung ein Passwort erforderlich ist, dann geben Sie bitte “0000” ein (in der
Regel ist kein Passwort erforderlich, es sei denn die Bluetooth Version des Mobiltelefons ist
2.1 oder älter).
4. Sie hören eine Sprachansage die anweist, dass die Paarung erfolgreich war.
4 Bluetooth Verbindung für Laptop
1. Sollte Ihr Laptop einen Bluetooth Adapter benötigen, versichern Sie sich, dass dieser
funktioniert. Sollte es eine eigene Bluetooth Funktion haben, dann aktivieren Sie diese bitte.
2. Gehen Sie in das Bluetooth Panel in Ihrem Laptop, suchen Sie “A8” und paaren Sie es.
3. Laden Sie den Bluetooth Lautsprecher erneut und dieser verbindet sich durch eine
Sprachansage automatisch mit Ihrem Laptop.
5 AUX Modus
Verbinden Sie den Bluetooth Lautsprecher mit einer 3,5mm Buchse mit einem Audiokabel
und Sie können es als normalen Lautsprecher nutzen.
Hinweis: Der Liedwechsel ist im AUX Modus nicht verfügbar, doch Sie können es noch immer
nutzen um die Lautstärke anzupassen.
6 TF Kartenmodus
Geben Sie eine TF Karte in den Bluetooth Lautsprecher und dieser begibt sich automatisch in
den TF Kartenmodus. Sie können dann Lieder abspielen, die auf der TF Karte gespeichert
8
wurden.
7 Modusschalter
Wenn sich der Bluetooth Lautsprecher im Bluetooth Modus / AUX Modus / TK Kartenmodus
befindet, drücken Sie kurz um den Modus zu wechseln.
8 Bluetooth Telefonanruf
Beantworten von Telefonanrufen: Wenn der Bluetooth Lautsprecher mit Ihrem Mobiltelefon
verbunden ist, können Sie kurz / drücken um einen eingehenden Anruf zu
beantworten. Bitte bleiben Sie während den Telefonanrufen nahe dem Mikrofon.
Auflegen: Drücken Sie kurz / um aufzulegen.
Telefonanrufe abweisen: Drücken Sie lange / um eingehende Telefonanrufe
abzuweisen.
Rückruf: Drücken Sie zweimal kurz / und die zuletzt gewählte Nummer wird
zurückgerufen.
9 Aufladen
Bitte nutzen Sie das USB Kabel und verbinden Sie dies zum Aufladen mit einem Computer
oder Laptop. Sie können es sowohl im ein- als auch ausgeschalteten Zustand laden. Das
Indikatorlicht bleibt während dem Ladevorgang an und schaltet sich automatisch aus, wenn
das Gerät vollständig aufgeladen wurde.
10 Tastaturlicht
Das Tastaturlicht schaltet sich zur Einsparung von Strom automatisch aus, wenn 1 Minute lang
9
kein Betrieb vorgenommen wurde. Drücken Sie eine Taste und das Licht schaltet sich wieder
ein.
11 Indikatorlicht
Das Indikatorlicht blinkt schnell, wenn es auf eine Bluetooth Verbindung wartet; blinkt
langsam wenn es sich im Abspielmodus befindet; und stoppt, wenn Sie das Abspielen
pausieren.
12 Anzeige Schwacher Batterie
Sie hören eine Sprachansage wenn der Bluetooth Lautsprecher über geringe Batterie verfügt.
Bitte laden Sie diesen rechtzeitig auf, andernfalls schaltet dieser sich nach gewisser Zeit
automatisch aus.
13 Rückstellsystem
Sollte der Bluetooth Lautsprecher aufgrund eines unangemessenen Betriebs oder anderen
Gründen abstürzen, so nutzen Sie bitte einen Zahnstocher oder einen anderen
nichtmetallischen Stab und führen Sie diesen in das „Reset“ Loch ein um den Bluetooth
Lautsprecher zurückzusetzen. Das „Reset“ Loch befindet sich unter der AUX Buchse.
14 FAQ
Q: Einschalten nicht möglich.
A: 1. Bitte prüfen Sie ob Strom verfügbar ist und laden Sie es bei Bedarf auf.
2. Bitte drücken Sie lange die Ein/Aus-Taste um es einzuschalten.
Q: Touch-Bedienung funktioniert nicht.
10
A: 1. Bitte berühren Sie es um es in der Korrekturposition zu betreiben.
2. Drücken Sie nicht mehrere Tasten zur gleichen Zeit.
Q: Kein Ton im Bluetooth Modus.
A: Bitte prüfen Sie die Bluetooth Verbindung und versichern Sie sich, dass das Bluetooth Gerät
Musik abspielt. Bitte versichern Sie sich auch, dass das Bluetooth Gerät nicht auf stumm
geschaltet ist und die Lautstärke normal ist.
Q: Kein Ton im AUX Modus.
A: 1. Bitte prüfen Sie ob das Audiokabel gut verbunden ist.
2. Bitte versichern Sie sich, dass der Bluetooth Lautsprecher auf AUX Modus gestellt wurde.
Q: Kein Ton im TF Kartenmodus.
A: 1. Bitte versichern Sie sich, dass die TF Karte gut eingelegt wurde.
2. Bitte versichern Sie sich, dass die Audiodateien unterstützt werden (wav Format und mp3
Format).
3. Bitte versichern Sie sich, dass der Bluetooth Lautsprecher auf TF Kartenmodus gestellt
wurde.
15 Spezifikation
Betriebsspannung 3.7V Batteriekapazität 1000mAh
Ladespannung USB 5V
500mA
SNR ≥80dB
Frequenz 20-20KHz Verzerrung <1%
Lautsprecherspezifikation 40mm 4Ω
3W
Dimensionen φ85x30mm
Arbeitsabstand ≤10m Ladezeit Etwa 2 Stunden
11
Abspielzeit Etwa 4-6 Stunden Gewicht 185g
16 Hinweis
1. Setzen Sie es über längere Zeit keiner hohen Luftfeuchtigkeit, extrem heißen Temperaturen
oder geringen Temperaturen aus.
2. Nutzen Sie keine scharfen Objekte an der Audioeinheit, die einen irreparablen Schaden
verursachen können.
3. Bitte laden Sie es rechtzeitig, wenn die Batterie niedrig ist.
4. Bitte laden Sie es alle 20 Tage, sollte es über längere Zeit nicht verwendet werden.
5. Bitte nutzen Sie es nicht, sollten Anomalitäten, wie Erhitzen, Rauch oder Geruch auftreten.
6. Auseinanderbau nur durch Experten.
17 Support
Danke für Ihren Einkauf! Wir sind immer bemüht, Ihre Zufriedenheit zu bewirken und offen
für neues und verbesserndes Denken. Wenn Sie irgendwelche Fragen oder Vorschläge haben,
treten Sie mit uns bitte jederzeit in Verbindung und wir antworten Ihnen innerhalb 24
Stunden.
Wir würden auch Bewertungen auf Amazon oder anderen Plattformen schätzen, um uns zu
helfen zu wachsen.
Email: [email protected]
Web: www.chereeki.com
Danke!
Chereeki Kundenbetreuung
12
Facebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com
13
1 Interfaces y teclas
2 Operaciones
Tecla de encendido / interruptor de modo
Toque corto “+” para subir el volumen, “-” para bajar el volumen. Toque corto para tocar
la canción anterior, para la siguiente canción. Toque corto / para reproducir /
Pausar / Responder llamada de teléfono / Colgar, haz un toque largo para desconectar la
conexión bluetooth, toca corto de nuevo para resumir la conexión bluetooth.
3 Conexión bluetooth por Celular
1. Presiona y sostén la tecla de encendido por 3 segundos para encender la bocina Bluetooth.
2. Activa la función Bluetooth en tu celular, busca “A8” y emparéjala.
14
3. Si requiere contraseña al emparejarla, por favor ingresa “0000” para emparejarla
(usualmente no requiere contraseña a menos que la versión del Bluetooth del celular sea 2.1
o anterior).
4. Escucharas un aviso de voz para recordarte que se han emparejado exitosamente.
4 Conexión Bluetooth a Laptop
1. Si tu laptop necesita un adaptador Bluetooth, por favor asegúrate que está funcionando.
Si tiene una función Bluetooth por sí misma, por favor actívala.
2. Ve al panel bluetooth en tu laptop, busca “A8” y emparéjala.
3. Reinicia la bocina Bluetooth y conectará con tu laptop automáticamente con un aviso de
voz.
5 Modo AUX
Conectar la bocina Bluetooth a un conector de 3.5mm con el cable de audio, y puedes usarlo
con una bocina ordinaria.
Nota: El interruptor de la canción estará deshabilitado cuando esté en modo AUX, aun lo
puedes usar para ajustar el volumen.
6 Modo Tarjeta TF
Inserta una tarjeta TF a la bocina bluetooth y entrará automáticamente en el modo TF. Puedes
tocar canciones que estén almacenadas en la tarjeta TF.
7 Cambio de Modo
Cuando la bocina bluetooth esté en modo Bluetooth / Modo AUX / Modo tarjeta TF, Toque
15
corto la tecla de encendido para cambiar de modo.
8 Llamada telefónica por Bluetooth
Responder llamada telefónica: Si conectaste la bocina Bluetooth con tu celular, puedes tocar
corto / para responder la llamada entrante. Por favor acércate al micrófono durante
las llamadas telefónicas.
Colgar: Toque corto / para colgar.
Rechazar llamada telefónica: Toque largo / para rechazar la llamada entrante.
Remarcar: Toque corto / dos veces y marcará al último número marcado.
9 Cargar
Por favor use el cable USB para conectar a la computadora o adaptador para cargarlo. Puedes
cargarlo tanto encendido o apagado. La luz indicadora permanecerá encendida cuando esté
cargándose y se apagará cuando esté completamente cargada.
10 Luz de las teclas
La luz de las teclas se apagará para ahorrar energía si no hay operación en 1 minuto. Toca la
tecla y la luz se encenderá de nuevo.
11 Luz Indicadora
La luz indicadora parpadeará rápidamente cuando esté esperando a conectar el Bluetooth,
parpadeará lentamente cuando la música esté tocando, y dejará de parpadear cuando pauses
la música tocando.
16
12 Recordatorio de Batería Baja
Escucharas un anuncio de voz cuando la Bocina Bluetooth esté con baja batería, por favor
cárgala a tiempo, de otro modo se apagará automáticamente después de un rato.
13 Reinicio de Sistema
Si la bocina Bluetooth crasheó por una operación inapropiada u otras razones, por favor use
un palillo de dientes u otro palo que no sea de metal para insertar en el agujero para reiniciar
la bocina Bluetooth. El agujero de reinicio está bajo la conexión auxiliar.
14 PREGUNTAS FRECUENTES
Q: No puedo encenderla.
A: 1. Por favor revisa si le falta energía, y recárgala si es necesario.
2. Por favor haz una presión larga al botón de encendido para encenderla.
Q: La operación touch no está funcionando.
A: 1. Por favor toque para operarla en la posición correcta.
2. No toque múltiples teclas al mismo tiempo.
Q: No hay sonido cuando está en modo Bluetooth.
A: Por favor revisa la conexión bluetooth, y asegúrate que el dispositivo bluetooth está
reproduciendo música. Por favor también asegúrate que el dispositivo Bluetooth no está en
modo de silencio y el volumen es normal.
Q: No hay sonido en modo AUX.
A: 1. Por favor revisa si el cable de audio está bien conectado.
2. Por favor asegúrate que la bocina Bluetooth está cambiada a modo AUX.
Q: No hay sonido cuando está en el modo tarjeta TF.
17
A: 1. Por favor revisa si la tarjeta TF está bien instalada.
2. Por favor asegúrate que los archivos de audio están soportados (formato WAV y mp3).
3. Por favor asegúrate que la Bocina bluetooth esta cambiada a modo tarjeta TF.
15 Especificaciones
Voltaje Funcional 3.7V Capacidad de Batería 1000mAh
Voltaje de Carga USB 5V 500mA SNR ≥80dB
Frecuencia 20-20KHz Distorsión <1%
Especificación de la
Bocina
40mm 4Ω 3W Dimensiones φ85x30mm
Distancia de Trabajo ≤10m Tiempo de Carga Alrededor de 2 horas
Tiempo de
Reproducción
Alrededor de 4-6
horas
Peso 185g
16 Nota
1. No lo sobreexponga a alta humedad, temperaturas extremadamente altas o bajas de
ambiente a lo largo del tiempo.
2. No use ningún objeto filoso para llegar a la unidad de audio, puede causar daño irreparable.
3. Por favor cárgala a tiempo cuando esté con baja batería.
4. Por favor cárgala cada 20 días si no la usas por mucho tiempo.
5. Por favor no la uses si pasa alguna anormalidad, como calentamiento, olor a quemado o
está humeando.
6. El desensamblado solo por profesionales.
18
17 Soporte
¡Gracias por tu compra! Siempre nos esforzamos para alcanzar su satisfacción y estamos
abiertos a nuevas y mejores opiniones. Si tiene alguna pregunta o sugerencia, contáctenos
en cualquier momento y le responderemos en un período de 24 horas.
Apreciaremos las revisiones en Amazon o cualquier otra plataforma, ya que eso nos ayuda a
crecer.
Correo electrónico: [email protected]
Web: www.chereeki.com
¡Gracias!
Atención al Cliente de Chereeki
Facebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com
19
1 Interfaces et touches
2 Manipulations
Bouton d’alimentation / Changement de mode
Appuyez brièvement sur "+" pour augmenter le volume, "-" pour baisser le volume. Appuyez
brièvement sur pour lire la chanson précédente, et sur pour la chanson suivante.
Appuyez brièvement sur / pour Jouer / Pauser / Répondre à l'appel téléphonique /
Raccrocher, appuyez longuement pour déconnecter la connexion Bluetooth, appuyez de
nouveau brièvement pour reprendre la connexion Bluetooth.
3 Connexion Bluetooth pour Téléphone mobile
1. Appuyez sur la touche d'alimentation et maintenez-la enfoncée pendant 3 secondes pour
20
allumer l'enceinte Bluetooth.
2. Activez la fonction Bluetooth sur votre téléphone portable, recherchez "A8" et appairez-le.
3. Si cela requiert un mot de passe lors de l'association, saisissez "0000" pour l'associer
(généralement, celà ne nécessitera pas de mot de passe à moins que la version Bluetooth du
téléphone portable soit la 2.1 ou une antérieure).
4. Vous entendrez une invite vocale pour vous rappeler qu'ils ont été associés avec succès.
4 Connexion Bluetooth pour ordinateur portable
1. Si votre ordinateur portable a besoin d'un adaptateur Bluetooth, assurez-vous qu'il
fonctionne. S’il a la fonction Bluetooth elle-même, activez-la.
2. Accédez au panneau Bluetooth de votre ordinateur portable, recherchez "A8" et appairez-
le.
3. Redémarrez le haut-parleur Bluetooth et il se connectera automatiquement à votre
ordinateur portable avec une invite vocale.
5 Mode auxiliaire
Connectez l'enceinte Bluetooth à une prise de 3,5 mm avec le câble audio, et vous pouvez
l'utiliser comme un haut-parleur ordinaire.
Remarque: Le commutateur de morceau ne sera pas disponible lorsqu'il est en mode AUX,
mais vous pouvez l'utiliser pour ajuster le volume.
6 Mode carte SD
Insérez une carte SD dans l’enceinte Bluetooth et elle entrera automatiquement en mode
carte SD. Vous pouvez lire les morceaux stockés dans la carte SD.
21
7 Changement de mode
Lorsque le haut-parleur Bluetooth est en mode Bluetooth / mode AUX / mode carte SD,
appuyez brièvement sur la touche d'alimentation pour changer de mode.
8 Bluetooth Phone Call
Répondre à un appel téléphonique: Si vous avez connecté l'enceinte Bluetooth avec un
téléphone portable, appuyez brièvement sur / pour répondre à l'appel entrant.
Veuillez vous rapprocher du microphone durant les appels.
Raccrocher: appuyez brièvement / pour raccrocher.
Refuser l'appel téléphonique: appuyez longuement sur / pour refuser l'appel entrant.
Rappel: appuyez brièvement deux fois sur / et rappelez le dernier numéro composé.
9 Charge
Utilisez le câble USB pour vous connecter à un ordinateur ou à un adaptateur pour le charger.
Vous pouvez le recharger aussi bien sous tension qu’hors tension. Le voyant s'allume quand
il se charge et s'éteint lorsqu'il est complètement chargé.
10 Eclairage du clavier
Le voyant du clavier s'éteint pour économiser l'énergie s'il n'y a pas de commande faite durant
1 minute. Appuyez sur la touche et la lumière s'allume à nouveau.
11 Voyant lumineux
Le voyant clignote rapidement en cas d'attente de connexion Bluetooth, clignote lentement
22
lorsqu'il est en lecture de musique et arrête de clignoter lorsque vous mettez en pause la
musique.
12 Rappel de batterie faible
Vous entendez une invite vocale lorsque le haut-parleur Bluetooth est en batterie faible.
Chargez-le à temps, sinon il s'éteindra automatiquement après un certain temps.
13 Réinitialisation du système
Si le haut-parleur Bluetooth ne fonctionne plus pour cause d'opérations incorrectes ou pour
d'autres raisons, utilisez un cure-dent ou une autre tige non métallique pour l’insérer dans le
trou de réinitialisation pour réinitialiser le haut-parleur Bluetooth. Le trou de réinitialisation
est sous la prise Auxiliaire.
14 FAQ
Q: Ne s’allume pas.
R: 1. Vérifiez s'il est déchargé et rechargez-le s'il le faut.
2. Appuyez longuement sur le bouton d'alimentation pour l'allumer.
Q: La fonction tactile ne fonctionne pas.
R: 1. Veuillez toucher pour l'utiliser sur la position de correction.
2. Ne touchez pas plusieurs touches en même temps.
Q: Aucun son en mode Bluetooth.
R: Vérifiez la connexion Bluetooth et assurez-vous que le périphérique Bluetooth joue de la
musique. Assurez-vous également que l'appareil Bluetooth n'est pas en mode silencieux et
que le volume est normal.
23
Q: Aucun son en mode Auxiliaire.
R: 1. Vérifiez si le câble audio est bien connecté.
2. Assurez-vous que le haut-parleur Bluetooth est passé en mode AUX.
Q: Aucun son en mode carte SD.
R: 1. Veuillez vérifier si la carte SD est bien insérée.
2. Assurez-vous que les fichiers audio sont pris en charge (format wav et format mp3).
3. Assurez-vous que le haut-parleur Bluetooth est passé en mode carte SD.
15 Caractéristiques techniques
Tension de marche 3.7V Capacité de la
batterie
1000mAh
Tension de charge USB 5V 500mA Rapport signal sur
bruit
≥80dB
Fréquence 20-20KHz Distortion <1%
Caractéristiques
haut-parleur
40mm 4Ω 3W Dimensions φ85x30mm
Distance de
fonctionnement
≤10m Temps de charge environ 2 heures
Durée de lecture Environ 4-6 heures Poids 185g
16 Remarque
1. Ne l'exposez pas à un environnement avec une humidité élevée, une température
extrêmement élevée ou basse dans le temps.
2. N'utilisez pas d'objet pointu pour accéder à l'unité audio, ce qui peut causer des dommages
24
irréparables.
3. Chargez-le à temps lorsqu'il est en batterie faible.
4. Veuillez le charger tous les 20 jours s'il n'est pas utilisé pendant une longue période.
5. Ne l'utilisez pas si des anomalies se produisent, telles que la surchauffe, l’émission de
fumée ou d’odeur.
6. Démontage uniquement par des professionnels.
17 Support
Merci pour votre achat! Nous nous efforçons toujours d'atteindre votre satisfaction et
d'ouvrir à nouveau et l'amélioration de la pensée. Si vous avez des questions ou des
suggestions, n'hésitez pas à nous contacter et nous vous répondrons dans les 24 heures.
Nous apprécierions également critiques sur Amazon ou autre plate-forme pour nous aider à
grandir.
Email: [email protected]
Web: www.chereeki.com
Merci!
Chereeki Customer Support
Facebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com
25
1 Interfaccia e Pulsanti
2 Operazioni
Alimentazione/Pulsante Modalità
Toccare brevemente "+" per aumentare il volume, "-" per abbassare il volume. Toccare
brevemente per riprodurre la canzone precedente, per andare alla canzone successiva
/ Toccare brevemente / per riprodurre/interrompere/rispondere al
telefono/riagganciare, toccare a lungo per scollegare la connessione Bluetooth, premere
brevemente per ricollegare la connessione Bluetooth.
3 Connessione Bluetooth per Cellulare
1. Tenere premuto il tasto di alimentazione per 3 secondi per accendere l'altoparlante
26
Bluetooth.
2. Abilitare la funzione Bluetooth sul tuo cellulare, cercare "A8" e accoppiarlo.
3. Se viene chiesta una password durante l'accoppiamento, inserisci "0000" (di solito non
viene richiesta alcuna password a meno che la versione Bluetooth del cellulare non sia 2.1 o
precedente).
4. Sentirete un prompt vocale per ricordarvi che sono stati accoppiati con successo.
4 Connessione Bluetooth per Computer Portatile
1. Se il computer portatile necessita di un adattatore Bluetooth, assicurarsi che funzioni. Se
ha la funzione Bluetooth, abilitatela.
2. Andare nel pannello Bluetooth sul computer portatile, cercare "A8" e accoppiarlo.
3. Riavviare l'altoparlante Bluetooth ed esso risulterà automaticamente connesso al
computer portatile con il prompt vocale.
5 Modalità AUX
Collegare l'altoparlante Bluetooth ad una presa da 3,5 mm col cavo audio e usarlo come un
normale altoparlante.
Nota: l'interruttore Song non sarà disponibile in modalità AUX, ma è comunque possibile
usarlo per regolare il volume.
6 Modalità scheda TF
Inserire una scheda TF nell'altoparlante Bluetooth ed entrerà automaticamente in modalità
scheda TF. È possibile riprodurre le canzoni memorizzate nella scheda TF.
27
7 Pulsante Modalità
Quando l'altoparlante Bluetooth è in modalità Bluetooth/Modalità AUX/Modalità Scheda TF,
premere brevemente il tasto di alimentazione per cambiare modalità.
8 Chiamata Telefonica Bluetooth
Rispondere alla telefonata: se l'altoparlante Bluetooth è stato connesso ad un cellulare, è
possibile toccare brevemente / per rispondere alla chiamata in arrivo. Si prega di
avvicinarsi al microfono durante le chiamate telefoniche.
Riagganciare: toccare brevemente / per riagganciare.
Rifiutare chiamata telefonica: Toccare a lungo / per rifiutare una chiamata in arrivo.
Richiamare: Toccare brevemente / due volte per richiamare l'ultimo numero chiamato.
9 Ricarica
Usare il cavo USB per connetterlo ad un computer o ad un adattatore per ricaricarlo. È
possibile ricaricarlo sia in stato di accensione sia in stato di spegnimento. La spia si accende
quando si sta caricando e si spegne quando è completamente carico.
10 Luce Tastiera
La luce tastiera si spegne per risparmiare energia se non viene svolta alcuna operazione in un
minuto. Toccare un tasto e la luce si riaccenderà di nuovo.
11 Indicatore Luminoso
La spia lampeggia rapidamente quando è in attesa della connessione Bluetooth, lampeggia
lentamente quando è in riproduzione musicale e smette di lampeggiare quando si interrompe
28
la riproduzione musicale.
12 Indicatore Bassa Batteria
Sentirete un prompt vocale quando l'altoparlante Bluetooth ha poca batteria. Si prega di
caricarlo in tempo, altrimenti si spegnerà automaticamente dopo un po' di tempo.
13 Ripristino del sistema
Se l'altoparlante Bluetooth va in crash per via di operazioni improprie o altri motivi, usare uno
stuzzicadenti o un altro bastoncino non metallico ed inserirlo nel foro di ripristino per
ripristinare l'altoparlante Bluetooth. Il foro di ripristino è sotto la presa AUX.
14 FAQ
D: Non si accende.
R: 1. Controllare se la batteria è scarica e ricarica se è necessario.
2. Premere a lungo il pulsante di alimentazione per accenderlo.
D: L'operazione di tocco non funziona.
R: 1. Si prega di toccare per farlo funzionare nella posizione di correzione.
2. Non toccare più tasti contemporaneamente.
D: Non si sente alcun suono quando è in modalità Bluetooth.
R: Controllare la connessione Bluetooth e assicurarsi che il dispositivo Bluetooth riproduca la
musica. Assicurarsi inoltre che il dispositivo Bluetooth non sia in modalità silenziosa e che il
volume sia normale.
D: Non si sente alcun suono in modalità AUX.
R: 1. Controllare che il cavo audio sia collegato in modo corretto.
29
2. Assicurarsi che l'altoparlante Bluetooth sia in modalità AUX.
D: Non si sente alcun suono in modalità scheda TF.
R: 1. Controllare che la scheda TF sia installata in modo corretto.
2. Assicurarsi che i file audio siano supportati (formato wav e formato mp3).
3. Assicurarsi che l'altoparlante Bluetooth sia in modalità scheda TF.
15 Specifiche
Voltaggio
Funzionamento
3.7V Capacità Batteria 1000mAh
Voltaggio
Caricamento
USB 5V 500mA SNR ≥80dB
Frequenza 20-20KHz Distorsione <1%
Specifiche
Altoparlante
40mm 4Ω 3W Dimensioni φ85x30mm
Distanza
Funzionamento
≥10m Tempo di Ricarica Circa 2 ore
Durata Riproduzione Circa 4-6 ore Peso 185g
16 Note
1. Non esporlo ad elevata umidità, temperature elevate o troppo basse.
2. Non usare oggetti taglienti per raggiungere l'unità audio. Queste potrebbero causare danni
irreparabili.
3. Ricaricare per tempo quando è la batteria scarica.
4. Ricaricare ogni 20 giorni se non viene usato per molto tempo.
30
5. Non usarlo se si verificano anomalie, ad esempio surriscaldamento, fumo o odori strani.
6. Farlo smontare solo da professionisti.
17 Assistenza
Grazie per l'acquisto! Siamo sempre alla ricerca della vostra completa soddisfazione e siamo
aperti a suggerimenti nuovi e sempre migliori. Se avete domande o consigli, non esitate a
contattarci in qualsiasi momento, vi risponderemo entro 24 ore.
Apprezzeremmo anche delle recensioni su Amazon o altre piattaforme, ci aiuterebbero a
crescere.
Email: [email protected]
Web: www.chereeki.com
Grazie!
Chereeki Assistenza Clienti
Facebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com
31