china gracemac paper limited. 1 lift the printer cover door
DESCRIPTION
2 Press the blue button inside the printer compartment. The printer roller component will pop out of its position.TRANSCRIPT
China Gracemac Paper Limited
1
Lift the printer cover door.
2
Press the blue button inside the printer compartment. The printer
roller component will pop out of its position.
3
Take-out the printer roller component and remove the old paper roll from
the printer compartment
4
Insert the new paper roll into the rear section of the printer compartment.
5
Pull the end of the roll forward so that the paper lies between the two
printer roller pivots.
6
Press the printer roller component into position on top of the two printer
roller pivots and the paper below it.
7
Feed the end of the paper through the slot in the printer cover door.
8
Close the printer cover door.
9
Tear off excess paper tape protruding from the slot. The thermal printer is
ready for printing activities.
10
Thanks For Looking!
Back