chm 5175: part 2.6
DESCRIPTION
Time-resolved emission. Source. CHM 5175: Part 2.6. h n. Clock. Detector. Sample. Ken Hanson MWF 9:00 – 9:50 am Office Hours MWF 10:00-11:00. Steady-state Emission. Sample. Source. Intensity vs. Wavelength. h n. h n. S 1. Non- emissive decay. Constant Excitation. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/1.jpg)
1
Ken HansonMWF 9:00 – 9:50 am
Office Hours MWF 10:00-11:00
CHM 5175: Part 2.6Time-resolved emission
Source
hn
Sample Detector
Clock
![Page 2: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/2.jpg)
Steady-state Emission
550 600 650 700 750 800 8500
50000
100000
150000
200000
250000
Inte
nsity
Wavelength (nm)
Intensity vs. WavelengthSource Samplehn
Information about emission intensity (yield) and wavelength.
S0
S1
EnergyConstant Excitation
Constant Emission
Equilibrium between absorption, non-emissive decay and emission.
Non-emissive
decay
hn
![Page 3: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/3.jpg)
Time-resolved Emission
Intensity vs. Time
Information about emission lifetimes.
S0
S1
EnergyPulsed
Excitationkrknr 0 200 400 600 800 1000
0
1000
2000
3000
4000
5000
Inte
nsity
Time (ns)
Short Burst of Light
Competition between non-emissive decay and emissive rates.
Source Samplehn
hn
![Page 4: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/4.jpg)
Single Molecule Emission
Excited State Lifetime of an individual molecule: 0 – infinity
Anthracene Excited state Lifetime:Time spent in the excited state (S1) prior to radiative (kr) or non-radiative decay. (kr)
Ex Em
S0
S1
Energy
Time
Ex Em Ex
![Page 5: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/5.jpg)
Ensemble Emission
Time-resolved EmissionIntensity vs. Time
0 200 400 600 800 10000
1000
2000
3000
4000
5000
Inte
nsity
Time (ns)
Single Molecule Emission
Excited State Lifetime of an individual molecule: 0 – infinity
Observe many single molecule emission events!
Ex Em
S0
S1
Energy
Time
Ex Em Ex
![Page 6: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/6.jpg)
Ensemble Emission
hn Time 1
64 excited states32 excited states
+ 32 photons
Time 2
Time 3
16 excited states + 16 photons
Time 4
8 excited states + 8 photons
4 excited states + 4 photons
Time 5
etc.
![Page 7: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/7.jpg)
Ensemble Emission
hn Time 1
64 excited states32 excited states
+ 32 photons
Time 2
Time 3
16 excited states + 16 photons
Time 4
8 excited states + 8 photons
4 excited states + 4 photons
Time 5
etc.
0 2 4 6 8 100
10
20
30
40
50
60
70
# Ex
cite
d St
ates
Time
0 1 2 3 4 5 6 7 8 9 100
10
20
30
40
Emis
sion
Inte
nsity
Time
32 photons
16 photons
8 photons
![Page 8: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/8.jpg)
kr + knr
Excited State Decay Curve
/t*
*e
)0(n)t(n
0 2 4 6 8 100
10
20
30
40
50
60
70
# Ex
cite
d St
ates
Time
n*(0) is the # of the excited state at time 0
n*(t) is the # of the excited state at time t
is the lifetime of the excited state
S0
S1
EnergyPulsed
Excitationkrknr
=1
We don’t get to count the number of excited state molecules!
![Page 9: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/9.jpg)
Intensity Decay Curve
I(0) is the initial intensity at time zero
I(t) is the intensity at time t
is the lifetime of the excited state0 1 2 3 4 5 6 7 8 9 10
0
10
20
30
40
Emis
sion
Inte
nsity
Time
= e-t/
kr + knr =
1
= time it takes for 63.2 % of excited states to decay
should always be the same for a given molecule under the same conditions
0 200 400 600 800 10000
1000
2000
3000
4000
5000
Inte
nsity
Time (ns)
I(t)I(0)
![Page 10: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/10.jpg)
time
intensity
1.00 --
1/e
Exciting pulse
Emission
time
Log intensity
Exciting pulse
Emission
Intensity Decay Curve
Linear Scale Log Scale
= e-t/I(t)I(0)
![Page 11: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/11.jpg)
Spectra Decay
= e-t/I(t)I(0)
inte
nsity
![Page 12: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/12.jpg)
Why do we care about lifetimes?• Electron transfer rates• Energy transfer rates• Distance dependence• Distinguish static and dynamic quenching• Fluorescence resonance energy transfer (FRET)• Track solvation dynamics• Rotational dynamics• Measure local friction (microviscosity)• Track chemical reactions
• kr and knr (if you know F)
• GFP- Nobel prize, expression studies• Sensing
![Page 13: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/13.jpg)
Lifetime Measurements
Inte
nsity
time
Light source
Time Domain
Pulsed MethodHarmonic or phase-modulation method
Frequency Domain
time
Inte
nsity
Light source
Source Samplehn
hn
![Page 14: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/14.jpg)
Samplehn
hn
hnhn
Low I0 Excitation
High I0 Excitation
hnhn
Low I0 Excitation
Time
Frequency-domain Method
I0
Measure Events with Respect to Frequency
![Page 15: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/15.jpg)
Frequency-domain Method
![Page 16: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/16.jpg)
Frequency-domain Method
Excitation Modulation = ab
a = average intensity b = average-to-peak intensity
Emission Modulation = AB
A = average intensity B = average-to-peak intensity
Modulation (m) =
(B/A)(b/a)
Phase Shift (f)
![Page 17: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/17.jpg)
Frequency-domain Method
Modulation (m)
Phase Shift (f)
Ex Frequency ()
2/121 ]1)/1[( mm
ff tan1
Changing , measuring m and f to calculate lifetime.
Phase (τφ) and modulation (τm) lifetimes
![Page 18: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/18.jpg)
ff tan12/121 ]1)/1[( mm
Frequency-domain Method
![Page 19: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/19.jpg)
Frequency-domain Method
• Lifetimes as short as 10 picoseconds • Can be measured with a continuous source• Tunable from the UV to the near-IR• Frequency domain is usually faster than time domain (same source)
![Page 20: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/20.jpg)
Frequency-domain Method
2/121 ]1)/1[( mm
ff tan1
f
m
Modulation (m)
Phase Shift (f)
Ex Frequency ()
![Page 21: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/21.jpg)
Frequency-domain Instrument
![Page 22: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/22.jpg)
Frequency-domain Method
List of Commercially Available Frequency-domain Instruments
![Page 23: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/23.jpg)
Lifetime Measurements
Inte
nsity
time
Light source
Time Domain
Pulsed MethodHarmonic or phase-modulation method
Frequency Domain
time
Inte
nsity
Light source
Source Samplehn
hn
![Page 24: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/24.jpg)
Inte
nsity
time
Light source
Time-Domain Method
• Pulsed method• Lifetimes as short as 50 fs• Multiple measurement techniques• Sources typically not as tunable as frequency domain
Emission
Emission intensity is measured following a short excitation pulse
Measure Events with Respect to Time
![Page 25: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/25.jpg)
Time-domain Techniques
1 s1 ms1 ms1 ns1 ps1 fs
secondsmillimicronanopicofemto0.001 s0.000001 s0.000 000 001 s
0.000 000 000 001 s0.000 000 000 000 001 s
1 s
Excitation
PhosphorescenceFluorescence
Internal Conversion
Intersystem Crossing
![Page 26: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/26.jpg)
TCSPC
Time-domain Techniques
1 s1 ms1 ms1 ns1 ps1 fs
Streak Camera MCSStrobeUp-conversion
Real-time Measurement
![Page 27: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/27.jpg)
Time-domain Techniques
1. Real-Time lifetime measurement ( > 200 ps)
2. Multi-channel scaler/photon counter ( > 1 ns)
3. Strobe –Technique ( > 250 ps)
4. Time-correlated single-photon counting ( > 20 ps)
5. Streak-camera measurements ( > 2 ps)
6. Fluorescence up-conversion ( > 150 fs)
![Page 28: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/28.jpg)
Real-Time Lifetime
hn
![Page 29: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/29.jpg)
Real-Time Lifetime
Source
hn
Sample Monochromator
Detector
Clock
(1) (2)
(3)
(4)
1) Pulsed excitation
2) Sample excitation/emission
3) Monochromator
4) Detector signal
5) Plot Signal vs. Time
![Page 30: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/30.jpg)
Real-Time Lifetime
Light source De
tect
or C
urre
nt
time
Emission
SourcesFlashlampLaserPulsed LED
![Page 31: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/31.jpg)
Real-Time Lifetime
• Make excitation pulse width as short as possible• Time resolution is usually detector dependent• Excited-state lifetime > IRF• Lifetimes > 200 ps
Instrument Response Function (IRF)
Dete
ctor
Cur
rent
time
Emission
![Page 32: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/32.jpg)
Real-Time Lifetime
0 200 400 600 800 10000
1000
2000
3000
4000
5000
Inte
nsity
Time (ns)
100 averages
![Page 33: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/33.jpg)
Strobe-Technique
25 images per second
![Page 34: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/34.jpg)
Strobe-Technique
Photon Technology International (PTI)
![Page 35: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/35.jpg)
Strobe-Technique
time
Light PulseMeasurement Window
time
Light PulseMeasurement Window
![Page 36: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/36.jpg)
Strobe-Technique
time
Light Pulse
Measurement Window
time
time
Dete
ctor
Si
gnal
![Page 37: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/37.jpg)
Strobe-TechniqueStrobe-Technique TCSPC
“Full decay curve is attainable after just one sweep (100 pulses)”
“TCSPC: for every 100 pulses, you get only up to three useful points”
“The Strobe technique is much faster than the TCSPC technique for generating the decay curve. This is particularly important in the life science area. Whereas the chemist can take hours or days to measure an inert chemical very accurately, the life scientists’ cell samples are long dead. “
Lower Time Resolution
![Page 38: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/38.jpg)
(1) (2)
(3) (4)
(5)
Strobe-Technique
1) Trigger Signal
2) Excitation Flash
3) Detector Signal Delay
4) Detect
5) Output > 250 ps
![Page 39: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/39.jpg)
Time-Correlated Single-Photon Counting (TCSPC)
Excited State Lifetime of an individual molecule: 0 – infinity
The sum an individual molecule lifetimes =
Ex Em
S0
S1
Energy
Time
Ex Em Ex
![Page 40: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/40.jpg)
Low excitation intensity:
- Low number of excited state
- 20-100 pulses before emission is detected
- Only one or 0 photons detected per pulse
- Simulated single molecule imaging
Time-Correlated Single-Photon Counting (TCSPC)
Time
![Page 41: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/41.jpg)
1) Pulsed source “starts” the timing electronics
2) Timer “stopped” by a signal from the detector
3) The difference between start and stop is sorted into “bins.” -Bins are defined by a Dt after pulse at t = 0
Time
Detector Bins
Time-Correlated Single-Photon Counting (TCSPC)
![Page 42: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/42.jpg)
Time-Correlated Single-Photon Counting (TCSPC)
Time
Detector Bins
Sum the Photons per Bin
![Page 43: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/43.jpg)
Time-Correlated Single-Photon Counting (TCSPC)
Probability Distribution
Repeat
![Page 44: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/44.jpg)
Excitation Pulse
Time-Correlated Single-Photon Counting (TCSPC)
![Page 45: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/45.jpg)
Repeat: 10,000 counts in the peak channel
Time-Correlated Single-Photon Counting (TCSPC)
![Page 46: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/46.jpg)
Time-Correlated Single-Photon CountingSource:
Flash lampsolid state LED laser
Start PMT
Stop PMTsample
exc. monochromator
emis
sion
m
onoc
hrom
ator
pulsed source
Dt
1) Pulsed excitation (10kHz)
2) Monochromator
3) Beam Splitter
1) to trigger PMT
2) to sample
4) Excite Sample
5) Sample emits into monochromator
6) Emission hits PMT and timer stops
7) Repeat a million times
(1)
(3)
(2)
(4)(5)
(6)
![Page 47: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/47.jpg)
constant function discriminator (CFD)time-to-amplitude converter (TAC)programmable gain amplifier (PGA)analog-to-digital converter (ADC)
TCSPC
1) Pulsed excitation2) Ex CFD triggers TAC3) TAC voltage rises4) Em CFD stops TAC5) TAC discharges to PGA6) PGA siganl to ADC for a single data point
![Page 48: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/48.jpg)
48
TCSPC
![Page 49: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/49.jpg)
Advantages:– High sensitivity– Large dynamic range (3-5 decades)– Well defined statistics– Temporal resolution down to 20 ps– Very sensitive (low emission materials)– Time resolution limited by detector– Price as low as $15 K
Disadvantages:– “Long” time to acquire data– Complicated electronics– Stray light– Lifetimes < 10 ms– Resolution vs. acquisition time
TCSPC
Molecule with a 10 ms lifetime• 10,000 peak counts• 1024 bins for a 20 ms window• Total counts = 4,422,800• 20 ms rep rate• 1 count per 20 reps= 20.5 day measurement
![Page 50: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/50.jpg)
Acquisition Time
Time
Detector Bins
Resolution vs. Acquisition Time
5 ns wide bin = 5 ns resolution10 minutes to acquire 10,000 counts
Time
Detector Bins
1 ns wide bin = 1 ns resolution50 minutes to acquire 10,000 counts
Resolution
Acquisition TimeResolution
![Page 51: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/51.jpg)
Time
Repetition Rate to High
hnhn
Real start-stop-time
![Page 52: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/52.jpg)
Sign
al
time
Repetition Rate to High
If the rep rate is too high the histogram is biased to shorter times!
Measured < Real
Keep rep rate at least 10 times slower than your
![Page 53: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/53.jpg)
Stop count rate < 2% of the excitation rate.
Limited number of emitted photons. Failure to do so can lead to a biasing towards detection of photons arriving at shorter times, a phenomenon known as pulse pile up.
Intensity to High
Single Photon Counting only counts the first photon!
![Page 54: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/54.jpg)
Photoelectric Effect
Photon Energy - binding energy = electron kinetic energy
Side Note: PMT Lifetime
![Page 55: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/55.jpg)
Side Note: PMT LifetimePhotoelectric Effect
Photon Energy - binding energy = electron kinetic energy
Higher Energy Photons = Faster Signal
Measured Lifetime < Real Lifetime
![Page 56: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/56.jpg)
Streak-CameraTemporal profile from Spatial profile
Laser Pointer Duty Cycle Calculating Duty Cycle
Pointer Motionm/s
Dist
ance Length
(spatial)
Use length to calculate time
![Page 57: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/57.jpg)
Streak-CameraCathode Ray Tube
e-
+
-
![Page 58: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/58.jpg)
Streak-Camera
(2)(1)
1) Light hits cathode (ejects e-)
2) Voltage sweep from low to high
3) e- hits MCP-Phosphor Screen
4) Emitted photos hit CCD detector
Source
hn
Sample Monochromator
(3)
(4)
![Page 59: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/59.jpg)
Calculating Duty Cycle
Pointer Motionm/s
Dist
ance Length
(spatial)
Use length to calculate time
Streak-Camera
Sweep Ratem/s
Length
Use length and intensity to calculate lifetimee-
time(0) time(t)
0 200 400 600 800 10000
1000
2000
3000
4000
5000
Inte
nsity
Time (ns)
+-
Intensity
![Page 60: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/60.jpg)
Streak-Camera
(2)(1)
1) Light hits cathode (ejects e-)
2) Voltage sweep from low to high
3) e- hits MCP-Phosphor Screen
4) Emitted photos hit CCD detector
Source
hn
Sample Monochromator
(3)
(4)
![Page 61: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/61.jpg)
Electrons that arrive first hit the detector at a different position compared to electrons that arrive later.
Streak-Camera
![Page 62: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/62.jpg)
Streak-Camera
![Page 64: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/64.jpg)
• Advantages:– Direct two-dimensional resolution– Sensitivity down to single photon– Very productive– Not detector limited (like TCSPC)
• Disadvantage: – Depends on high stability of laser– Limited time resolution: 2-10 ps– Needs careful and frequent calibration– Expensive
Streak-Camera
![Page 65: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/65.jpg)
Streak-Camera
Time resolution down to 2ps or even 100s of femtoseconds.
TCSPC
Instrument Response Functions
![Page 66: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/66.jpg)
Fluorescence up-conversion
Sum Frequency Method
ωsum = ω1 + ω2
![Page 67: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/67.jpg)
Fluorescence up-conversion
1) Excitation pulse/gate pulse
2) Sample is excited
3) Sample Emission
4) Emission and Gate are collinear
5) NLO crystal sums Emission and Gate
6) Only Summed Light is measured
(1)
(4)(2)
excitation beamgate beam
(1)
(3)
(5)(6)
![Page 68: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/68.jpg)
Fluorescence up-conversionExcitation pulse
Emission
Inte
nsity
Excitation pulse
Inte
nsity
Gatepulse
td1
Inte
nsity Summed Light
at time 1
time
time timeExcitation
pulse
Inte
nsity
Gatepulse
td2
Inte
nsity Summed Light
at time 2
time time
Inte
nsity
time
Control td and measure only summed light
Graph of td vs intensity
![Page 69: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/69.jpg)
Fluorescence up-conversion
1) Excitation pulse/gate pulse
2) Sample is excited
3) Sample Emission
4) Emission and Gate are collinear
5) NLO crystal sums Emission and Gate
6) Only Summed Light is measured
(1)
(4)(2)
excitation beamgate beam
(1)
(3)
(5)(6)
Signal is only measured when gate is pulsed
td is controlled by the delay track
Light Travels 0.9 m in 1 ns
![Page 70: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/70.jpg)
ComparisonIn
tens
ity
time
Control td and measure only summed light
Detector is not time resolved (left open).Not limited by detector speed.Data point limited by pulse width (fs)
Sum Frequency Generation TCSPC
Detector Bins
Inte
nsity
time
Limited by detector response.Data point limited by PMT (10 ps)
Control excitation measure td
![Page 71: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/71.jpg)
Fluorescence up-conversion
![Page 72: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/72.jpg)
Phys . Chem. Chem. Phys. 2005, 7, 1716 – 1725.
Fluorescence up-conversion
![Page 73: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/73.jpg)
Fluorescence up-conversion
![Page 74: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/74.jpg)
74
• Advantage: – (very) high time resolution, limited mainly by laser pulse duration
• Disadvantages:– Demanding in alignment– Limited sensitivity, decreasing with increasing time resolution
(crystal thickness)– Required signal calibration
Fluorescence up-conversion
![Page 75: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/75.jpg)
Decay Fitting
Exponential decay
= e-t/I(t)I(0)
Non-exponential decay
![Page 76: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/76.jpg)
Non-exponential Decay (Log)
Exponential decay Non-exponential decay
Time Time
Inte
nsity
= e-t/I(t)I(0)
Inte
nsity
![Page 77: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/77.jpg)
Non-exponential
Possible explanations:- Two or more emitters
- In homogeneous samples (QDs)
- Dual Emission
- Multiple emissive sites
On surfaces
Polymer Films
Peptides
Dual Emission
![Page 78: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/78.jpg)
Intensity
t / ns
Log
I
t / ns
5 ns50 ns
Non-exponential Decay
= A1e-t/1 + A2e-t/2I(t)I(0)
A1 = amplitude of component 11 = lifetime of component 1A2 = amplitude of component 22 = lifetime of component 2
Linear Scale
Log Scale
Biexponential Fit
![Page 79: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/79.jpg)
Non-exponential Decay
= A1e-t/1 + A2e-t/2I(t)I(0)
![Page 80: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/80.jpg)
Limitations of Multi-exponential Fits
Linear Scale: No differenceLog Scale: minor differences at 30–50 ns
At 50 ns there are only about 3 photons per channel with a 1-ns width. The difference between the two decays at long times is just 1–2 photons.
Biexponential Fits
1 = 5.5 ns and 2 = 8.0 nsor
1 = 4.5 ns and 2 = 6.7 ns
![Page 81: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/81.jpg)
Fitting Data
![Page 82: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/82.jpg)
y = A1e-k1t + A e-k2t + A3e-k3t
c2 = 26.466
y = A1e-k1t + A e-k2t
c2 = 2.133
The Data Exponential
Bi-exponential Tri-exponential
c2 = 1.194
Multi-exponential Fits
y = A1e-k1t
![Page 83: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/83.jpg)
J. of Political Economy 2005, 113, 949
It could be worse!
![Page 84: CHM 5175: Part 2.6](https://reader035.vdocument.in/reader035/viewer/2022081503/5681685c550346895dde9747/html5/thumbnails/84.jpg)
Time-resolved Emission End
Any Questions?