4.77 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

1

55.00 g

d

MK3S +MMU2S

Summary

This is a chopping board holder slim made for boards less than 10mmthick. It makes much easyer to organize the board and in the same timegood place to let them dry after washing them.

Household > Kitchen

chopping holder board

Printed in PLA It does not need support or raft If you find it difficult to printit without warping it may be a good idea to make a brim. It works goodwith any layer height between 0.1mm and 0.2mm.

Alex

Chopping boardholder

VIEW IN BROWSER

updated 17. 2. 2020 | published 17. 2. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

8.6 MB

4.77 hrs f 0.20 mm k 0.40 mm h PLA 54.70 g d MK3S +MMU2S

updated 17. 2. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

124.2 KBupdated 17. 2. 2020

502.3 KBupdated 17. 2. 2020

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—No Derivates

✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

chopping-board-holder-slim_02mm_pla_mk3smmu2s_4.gco

chopping-board-holder-slim.3mf

chopping-board-holder-slim.stl