chromarange ~ chromazonepremier-solutions.biz/user guides/pulsar/chroma range.pdf · the chromazone...

24500 - ChromaZoneTM 12 Fixture ControllerCPSU2 - ChromaPSU2TM 2 Fixture PSU24504B - ChromaBankTM (Black)24504W - ChromaBankTM (White)

8074 / 8075 - ChromaFlexTM cable (Black / White)

Pulsar's Chroma Lighting Fixtures - ChromaLight,ChromaDome,ChromaFlush, ChromaStrip,ChromaPanel, ChromaScape,ChromaHearts, etc.,contain state of the art, high brightness, high efficiency Red,Green and Blue LEDs. These three primary colours can bemixed together to make an incredible pallet of 16.7 millioncolours.Each ChromaFixtureTM requires a +24VDC supply at up to500mA and three 0 to +10V control signals to control the levelof Red, Green and Blue. These control signals and the lowvoltage power are provided by the ChromaZone controllerwhich can drive up to 12 ChromaFixtures.The ChromaZone has numerous chases and effects built inmaking it possible to achieve fantastic effects withoutprogramming. These internal effects can be selected via theDIL switches on the side of the unit in stand alone mode orfrom a controller using a digital PMX ( Pulsar MultipleX) orDMX (Digital MultipleX) signal.The ChromaZone can receive a block of 6 or 42 PMX/DMXchannels. The first six channels control the inbuilt effects,while the optional next 36 channels allow individual control ofthe Red, Green and Blue of each ChromaFixture. The ChromaZone has mounting flanges making it ideal forwall, ceiling or rig mounting, close to the fixtures it is driving.

The ChromaBank, which contains 12 ChromaHeartsTM,has a built in ChromaZone to power and drive them.Some ChromaFixtures have a letter suffix. This signifies thefinished colour of the fixture (W = White). Other colours maybecome available - please check with Pulsar if required.

NB - Patents applied for.

Mains Supply - The ChromaZone works correctly on anymains voltage from 100-240 VAC, 50-60Hz, (self adjusting).Power consumption ranges from 10 Watts to 150 Wattsdepending on the number of fixtures connected and theiroutput levels. A mains cable is provided with an IEC female connectorattached. The other end of the cable should be fitted with asuitably approved and rated mains plug. Note: in somecountries it is a requirement that such a plug be fitted by aqualified electrician.

CABLE COLOURSGreen/Yellow = Earth / Ground

Brown = Live / Phase / HotBlue = Neutral

WARNING - THIS APPLIANCE MUST BE EARTHEDFor safety we recommend the use of a ResidualCurrent Circuit Breaker. An RCCB MUST be usedwhen powering ChromaScapes in wet environments.Electronics On/Off Switch with built in Indicator Neon.Electronics Mains Fuse: 5 Amp, HRC, 5x20mm.

CHROMAZONE MAINS SUPPLY

SPECIFICATION

ChromaRange™ ~ ChromaZone™

CHROMAZONE SIGNALS AND Data Status Indicators:Receive DMX LED - This green Light Emitting Diode shows thatDMX data is reaching the ChromaZone .Receive PMX LED - This yellow Light Emitting Diode shows thatPMX data is reaching the ChromaZone .Data Error LED - This red Light Emitting Diode shows that theChromaZone did not recognise the last information received.Errors can often occur if the DMX line is not terminated. The end ofthe DMX line must always be terminated with a 100W or 120Wresistor connected between signal+ and signal-, this resistor canbe conveniently mounted in a 5 pin XLR plug which should beinserted in the last unit on the DMX line.Unlike DMX, PMX may be branched and needs no termination.LVS LED - This blue LED shows that a Low Voltage Supply(+23VDC, 120mA max.) is connected to Pin 5 of the male XLRconnector, via switch 12, to power a desk or other equipment.

Start Address Switches - the ChromaZone receives a block of6 channels (option switch 11 down) or 42 channels (option switch11 up) from the signal. The Start Address Switch selects thenumber of the first channel in the block. Dial up the start addressrequired using the Hundreds, Tens and Units switches provided.

Channel functions:The first 6 PMX / DMX channels function as follows :Channel 1 - All RedChannel 2 - All GreenChannel 3 - All BlueChannel 4 - Internal chase select - see front panel printing overleafChannel 5 - Internal chase speedChannel 6 - Internal chase levelIf the unit is in 42 channel mode (option switch 11 up) then the first6 channels have the same function, but additional channels 7 - 42take overriding control of each of the individual 36 outputs if theyhave a level >0%, as follows:Channel 7 - ChromaFixture No.1 Red Channel 8 - ChromaFixture No.1 GreenChannel 9 - ChromaFixture No.1 BlueChannel 10 - ChromaFixture No.2 Red, etc.

12 Way DIL Switch - The DIL (Dual In Line) switch is used to selectvarious fixed colours, chases and chase speeds. TheChromaZone DIL switches take effect when the unit has no digitalinput signal, this allows the unit to function in "Stand Alone" mode. Switches 1, 2, 3 or the first three PMX / DMX channels will set thecolour for all connected fixtures - see front panel printing overleaf.Switches 4, 5, 6 and 7 or PMX / DMX channel 4 can be used toselect from 14 pre-programmed chases - see front panel printingoverleaf. The Auto Chase runs a sequence of these chases.Switches 8, 9, 10 or PMX / DMX channel 5 can be used to selectthe chase speed - see front panel printing overleaf.PMX/DMX Channel 6 controls the maximum brightness level of theselected chase pattern.Switch 11 selects 6 or 42 channel mode for digital reception.Switch 12 connects the LVS to pin 5 of the MALE XLR.

PMX/DMX In/Thru 5 Pin XLR ConnectorsDigital Control Signals: Two 5 pin XLR sockets (in/thru) areprovided. The pin connections of the sockets are:PMX (RS232/423) SIGNAL DMX SIGNALPin 1 = Screen - Chassis Earth Pin 1 = Screen - Chassis EarthPin 2 = Signal Pin 2 = Signal -Pin 3 = Signal Earth Pin 3 = Signal +Pin 4 = no connection Pin 4 = no connectionPin 5 = LVS (male only) Pin 5 = LVS (male only)

CHROMAZONE OUTPUT CONNECTIONSOutputs - Twelve 5 pole, cage clamp connectors are provided onthe side panel. Each connector provides the necessary power andsignal to drive a ChromaFixture.Two Connectors are supplied with each ChromaFixture. 50mof black ChromaFlex is supplied with each ChromaZone andextra ChromaFlex is available.It is recommended that the maximum run of ChromaFlex betweenthe ChromaZone and a ChromaFixture is 20m. Wiring: Strip back the outer insulation and the insulation from thecores of the ChromaFlex a suitable distance. Insert a flat bladescrew driver into the cage clamp connector and press it down toopen the terminal. Insert the wire. Release the screw driver. Thespring loaded cage clamp holds the wire tightly ensuring a longterm, reliable connection.

Pin No. FunctionChromaFlexCore Colour

1 0V Black

2 Red 0-10V Red

3 Green 0-10V Green

4 Blue 0-10V Blue

5 +24VDC White

Failure of the ChromaZone Electronics 5 Amp, HRC, 5x20mmFuse, usually indicates an internal fault requiring servicing by aqualified engineer. Each 24VDC output is protected by an internal, resettable solid statefuse. Switch off the unit, fix the fault and switch on again to resetthe fuse.The 0-10V signal inputs and outputs are protected against shorts to24V, 0V and static damage.

PORTABLE APPLIANCE TESTING - The Pulsar ChromaZonemay be safely Earth Bond and Insulation (500V) Tested.STANDARDS - The Pulsar ChromaZone complies with thefollowing International and National Standards:Electrical Safety - IEC65, EN60065, BS415EMC - EN50081-1, EN55022, EN50082-1Index of Protection - IP20

Marking Directive 93/68/EECThe Pulsar ChromaZone meets both the EMCDirective 89/336/EEC and the Low Voltage Directive73/23/EEC.

The ChromaFixture products are low voltage units operating on+24VDC without a direct connection to the mains supply, they aretherefore inherently safe as they operate on less than 75VDC asspecified in the Low Voltage Directive 73/23/EEC.

GUARANTEE - 12 months from the date of original purchase. Theguarantee is limited to parts and labour. The guarantee is void if theunit is mis-used, repairs are performed by unauthorised persons, orthe incorrect type of fuse has been used. In the unlikely event of afault occurring, do not use without repair. Return the unit, with adescription of the fault, to your supplier or direct to Pulsar forimmediate attention.

DIMENSIONS AND WEIGHTCode Unit Width Height Depth Weight

24500 ChromaZone + 50m ChromaFlex

200 342 30 9.3Kgs

FUSES AND PRECAUTIONS

OTHER INFORMATION

CHROMAPSU2 MAINS SUPPLY

CHROMAPSU2 OUTPUT CONNECTIONS

CPSU2 - ChromaPSU2™ Power Supply 2 Ch (0 to +10V) Pulsar's Chroma Lighting Fixtures - ChromaLight™, ChromaDome™, ChromaFlush™, ChromaStrip™, ChromaPanel™ etc., contain state of the art, high brightness, high efficiency Red, Green and Blue LEDs. These three primary colours can be mixed together to make an incredible pallet of 16.7 million colours. Each ChromaFixture requires a +24VDC supply at up to 500mA and three 0 to +10V control signals to control the level of Red, Green and Blue.

The 24VDC Power for up to two ChromaFixtures is provided by the ChromaPSU2™. The 0-10V RGB Control signals are provided by any 0-10V analogue controller, for example, a Pulsar Modulator, Control Desk, Masterpiece or Replay Unit.

The controller connects via the DIN socket input(s) and the ChromaFixture(s) connect to the “cage clamp” output socket(s) (see lid printing).

The ChromaPSU2™ has mounting flanges making it ideal for wall, ceiling or rig mounting, close to the ChromaFixtures it is driving. NB - Patents applied for.

A mains cable is provided with an IEC female connector attached. The other end of the cable should be fitted with a suitably approved and rated mains plug. Note: in some countries it is a requirement that such a plug be fitted by a qualified electrician.

Cable colours Green/Yellow = Earth / Ground

Brown = Live / Phase / Hot

Blue = Neutral

WARNING - THIS APPLIANCE MUST BE EARTHED

MAINS SUPPLY - The ChromaPSU2™ works correctly on any mains voltage from 100-130 or 200-250VAC, 50-60 Hz. Power consumption ranges from 15-50VA depending on the number of fixtures connected and their output levels. VOLTAGE SELECTOR - Ensure the correct voltage range from 115V / 230V, is selected before switching on! We recommend the use of a Residual Current Circuit Breaker. Electronics On/Off Switch with built in Indicator Neon. Electronics Mains Fuse: 1 Amp, 5x20mm. REMOTE CONTROL – 2 x 8 pin DIN sockets are provided to allow connection from a controller. The pin connections are: DIN sockets:

Pin 1 = Low Voltage Supply Out Pin 5 = Channel 3 Pin 2 = Earth / Ground Pin 6 = Channel 4

Pin 3 = Channel 1 Pin 7 = Channel 5 Pin 4 = Channel 2 Pin 8 = Channel 6

Technical Details: • 0V = lights off, +10V = lights full on. • The input impedance of ChromaFixtures is 100k ohms. • The Low Voltage Supply (LVS) available for a Controller from pin 1

of the DIN sockets is +23VDC at up to 250mA. • Control cables do not need to be screened as the inputs of the

ChromaFixtures are filtered against hum and interference. • The 0-10V control cables may be as long as necessary and the

minimum size of their conductors is limited only by considerations of mechanical strength.

Outputs - Two 5 pole, cage clamp connectors are provided on the end panel. Each connector provides the necessary power and signal to drive a ChromaFixture.

ChromaPSU2™

SPECIFICATION

MAINS SUPPLY Cont.

Two Connectors are supplied with each ChromaFixture.

It is recommended that you use only Pulsar ChromaFlex™ to connect between the ChromaPSU2™ and a ChromaFixture. This is available from Pulsar, part number 8074 / 8075 ChromaFlex™ cable (Black / White).

It is recommended that the maximum run of ChromaFlex between the ChromaPSU2™ and a ChromaFixture is 20m.

Wiring: Strip back the outer insulation and the insulation from the cores of the ChromaFlex™ a suitable distance. Insert a flat blade screw driver into the cage clamp connector and press it down to open the terminal. Insert the wire. Release the screw driver. The spring loaded cage clamp holds the wire tightly ensuring a long term, reliable connection.

Pin No. Function ChromaFlex Core Colour

1 0V Black 2 Red 0-10V Red 3 Green 0-10V Green 4 Blue 0-10V Blue 5 +24VDC White

Failure of the ChromaPSU2™ Electronics 1 Amp, 5x20mm Fuse, usually indicates an internal fault requiring servicing by a qualified engineer.

The 0-10V signal inputs and outputs are protected against shorts to 24V, 0V and static damage.

PORTABLE APPLIANCE TESTING - The Pulsar ChromaPSU2™ may be safely Earth Bond and Insulation (500V) Tested.

STANDARDS - The Pulsar ChromaPSU2™ complies with the following International and National Standards:

Electrical Safety - IEC65, EN60065, BS415 EMC - EN50081-1, EN55022, EN50082-1 Index of Protection - IP20

Marking Directive 93/68/EEC - The Pulsar ChromaPSU2™ meets both the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC.

GUARANTEE - 12 months from the date of original purchase. The guarantee is limited to parts and labour. The guarantee is void if the unit is misused, unauthorised persons perform repairs, or the incorrect type of fuse has been used. In the unlikely event of a fault occurring, do not use without repair. Return the unit to your supplier with a description of the fault, or direct to Pulsar for immediate attention.

DIMENSIONS AND WEIGHTS Code Unit Width Height Depth Weight mm mm Mm kg CPSU2 130.0 280.0 65.0 1.7

ChromaPSU2 Power Supply 2 Channel (0 to +10V)

OTHER INFORMATION

CHROMAPSU2 OUTPUT CONNECTIONS Cont.

In

struction

s

Pulsar Light of Cambridge Limited 3 Coldhams Busines Park Cambridge CB1 3LH England Tel: 44 (0)1223 403500 Fax: 44 (0)1223 403501 Email: [email protected] Web: www.pulsarlight.com

TM ChromaLight

TM ChromaLight

TM ChromaFixtures

GENERAL INFORMATION

7572 Sheet 1 of 6MLG 17-9-02

PART NUMBER INFORMATION

8074

8075

-

-

TM

ChromaFlex cable Black per metre TM

ChromaFlex cable White per metre

CHROMARANGE CONNECTION

Colour coded inline Plug and Socket1. Black 0V Power and Signal 2. Red 0-10V Red Signal3. Green 0-10V Green Signal4. Blue 0-10V Blue Signal5. White 24V Power

The ChromaRange of Products use the WAGO Cage Clamp range of connectors to provide the necessary power and signal to drive each ChromaFixture.

Each ChromaZone controller is supplied with 50m of low smoke and fume ChromaFlex .

TM Maximum Recommended Run of ChromaFlex 20m. Very slight interaction between the colours may occur with longer runs.

A tool is available for mass termination of the WAGO plugs and sockets (see below). Alternatively, a flat bladed screw driver can be inserted into the cage clamp connector and pressed down to open the terminal. The stripped wire is then inserted and the screw driver released to allow the spring loaded cage clamp to firmly hold the wire firmly ensuring a long term reliable connection.

Shrouds are available for all inline plugs and sockets usedin the ChromaRange where anti tamper protection is required.

Extra plugs, sockets, shrouds and ChromaFlex are available.


24500

CPSU2

-

-

TM

ChromaZone Controller TM

ChromaPSU2 Power Supply

195.0

45.0

102.5

EyeballDiameter

137.0

Fixing Cutout 164-170mm

ChromaLight Specification

Power Requirement: 520mA @ 24V DC (12.5W) Max.

Weight: 460g

IP Rating: IP20

Beam Angle: 20 deg.Optics: Light diffusion filter supplied, part number 5778. Rotating beam shaping optics also available. The diffuser may be cleaned with clean water and a mild detergent solution.

Light Output @1m White (RGB100%) 1000 Lux, Red 350 Lux, Green 750 Lux, Blue 85 Lux.

Fixing Detail, Cutout diameter:164-170mm

Connection: Rear panel mounted WAGO plug

Each ChromaLight is supplied with two colour coded inline WAGO sockets.

Colours and finishes: White paint W, Black paint B, Silver paint S, Self Paint (undercoat only - to be painted by customer) SP, Gold Plated G, Chrome Plated C. (Letter denotes suffix to part number ie W = White). Other colours may become available - please check with Pulsar if required.

Care must be taken not to obstruct the air flow from the rear vents.

Tel: +4m 4o (.c 0t )h 1gi 2lr 2a 3s l 3u 6p. 67w 9w 8

w

PULSAR LIGHT OF CAMBRIDGE LTD. UK

Do not obstruct rear air vents

Patents Applied For

Bk R G B W

0V 0-10V SIGNAL 24VDC POWER

TM

Tel: 44(0)1223 366798 www.pulsarlight.com

Serial No.

Air VentsMust beKept Clear

Rear View

Pulsar’s Chroma Lighting Fixtures contain state of the art, high brightness, high efficiency Red, Green and Blue LEDs. These three primary colours can be mixed together to make an incredible pallet of 16.7 million colours. The LED’s have an expected life of 25,000 hours at full power white but this is greatly increased if the fixture is dimmed or producing coloured light as in normal use.

The pure colours produced contain no Ultra Violet or Infra Red radiation to fade, heat or damage sensitive materials.

Each ChromaFixture requires a +24VDC supply at up to 520mA and three 0 to +10V control signals to control the level of Red, Green and Blue.

These control signals and the low voltage supply may be provided by the ChromaZone Controller which can drive up to 12 ChromaFixtures. For more detailed information see ChromaZone data sheet.

The ChromaZone has numerous chases and effects built in making it possible to achieve fantastic effects without programming. These internal effects can be selected via the DIL switches on the side of the unit in stand alone mode or from a controller using a digital PMX (Pulsar MultipleX) or DMX (Digital MultipleX) signal.

Alterntively, a ChromaPSU2 can be used to provide power for up to two ChromaFixtures and is used in conjunction with any analogue 0-10V controller such as a Pulsar Modulator, Control Desk, Masterpiece or Replay Unit.

General Specificationo oChromaFixture Ambient Temperature Range -20 C to 40 C

Please note, the published light output figures are averages.

As new more efficient LED’s become available they will be incorporated into the ChromaFixtures.

Patents applied for.

4447

4448

4456

-

-

-

In-line colour coded socket (F)

In-line colour coded plug (M)

In-line shroud set

5798 - TM

ChromaPliers Wago tool

TM ChromaLight

Shroud Set 4456 Comprises:4449 Cover Set - x14451 Clamp - x14453 Screw - x2

In Line SocketIn Line PlugPCB Plug

oEyeball Rotation +/-33

80mmMinimum

Void Depth

TM ChromaCrab

TM ChromaCrab

TM ChromaDome

TM ChromaDome

TM ChromaDome

TM ChromaCrab

24502

5652

-

-

TM

ChromaDomeTM

Extra handle to make ChromaCrab

ChromaDome Specification

Power Requirement: 520mA @ 24V DC (12.5W) Max.Weight: 475g

IP Rating: IP20

Beam Angle: 20 deg.

Optics: Light diffusion filter supplied, part number 5778. Rotating beam shaping optics also available. The diffuser may be cleaned with clean water and a mild detergent solution.


Fixing Detail: A fixing handle is supplied with holes as shown. A second fixing handle is also available to produce a free standing unit known as the ChromaCrab, as shown above.

Connection: 1.5m of ChromaFlex terminated by a shrouded colour coded In-Line WAGO socket. Each ChromaDome is also supplied with a colour coded WAGO socket and plug to make an extension lead. An extra shroud set is also supplied to increase the tamper protection of the extension lead joint.

Colours and finishes: White paint W, Black paint B, Silver Paint S, Self paint (to be painted by customer) SP, Gold Plated G, Chrome Plated C. (Letter denotes suffix to part number i.e. W = White). Other colours may become available - please check with pulsar if required.


145.0

25.4

31.058.0

20.5

View of top of handle showing hole detailA - 6.7mm dia. B - 10.5mm dia. C - 5.0mm dia.

A B C B BC A


TMChromaFlush

TMChromaFlush

TMChromaFlush

165.0

111.0

Fixing Cutout 136-142mm

ChromaFlush Specification


Weight: 420g

IP Rating: IP20

Beam Angle: 20 deg.

Optics: Light diffusion filter supplied.The diffuser may be cleaned with clean water and a mild detergent solution.


Fixing Detail, Cutout diameter:136-142mm

Connection: Rear panel mounted WAGO plug.

Each ChromaLight is supplied with two colour coded WAGO inline sockets

Colours and finishes: White paint W, Black paint B, Silver Paint S, Self paint (to be painted by customer) SP, Gold Plated G, Chrome Plated C. (Letter denotes suffix to part number i.e. W = White). Other colours may become available - please check with Pulsar if required.



24503 - TM

ChromaFlush

EyeballDiameter

137.0

140.0

102.5



Patents Applied For

Bk R G B W


Tel: 44(0)1223 366798 www.pulsarlight.com

Serial No.

TM

165.0

7572 Sheet 2 of 6


24501’X’

C99WIDE

C99OVAL

C99SPLIT

5778

-

-

-

-

-

TM

ChromaLight

TM

ChromaFilter

o Wide angle beam (28 ) shaper o o Oval beam (17 x 55 ) shaper

o Beam splitter - 2 beams 55 apart

(’X’ denotes colour)

oStandard Diffuser 20

C99WIDE

C99OVAL

C99SPLIT

5778

-

-

-

- TM

ChromaFilter

o Wide angle beam (28 ) shaper o o Oval beam (17 x 55 ) shaper

o Beam splitter - 2 beams 55 apartoStandard Diffuser 20

120mmMinimum

Void Depth

Specification

The ChromaHeart is the light source in the ChromaLight / Dome / Flush and ChromaBank. It is made available for customers who wish to use this versatile light source in their own equipment. Size 88 x 105 x 105mm. Will fit in a 111mm dia. tube. See data sheet 7576 for detail of use.

Power Requirement: 520mA @ 24V DC (12.5W) Max.Weight: 230g.IP Rating: IP00

Beam Angle: 20 deg.

Optics: Light diffusion filter supplied, part number 5778. Beam shaping optics also available but as with the diffuser, they will need to be held in place by the user.


Fixing Detail: See detail specification sheet for the ChromaHeart part number 7576 available from Pulsar

Connection: Rear panel mounting WAGO plug.

Each ChromaHeart is supplied with two colour coded WAGO sockets.

Colours and finishes: Black paint B only.

Care must be taken not to obstruct the air flow from the rear vents. Air filter provided.


24505B - TM

ChromaHeart

75

590

590

TM ChromaPanel


CP600 - TM

ChromaPanel

Specification

The ChromaPanel is designed for use in a 600mm grid suspended ceiling. It can also be wall mounted or used as a light source under an illuminated dance floor.

The ChromaPanel is not designed to be load bearing. To be used as part of an illuminated dance floor it needs to be under an appropriate structure.

Power Requirement: 520mA @ 24V DC (12.5W) Max.Connection: In-Line WAGO socket terminating 5m of ChromaFlex. Each ChromaPanel is also supplied with a colour coded WAGO socket and plug. Four cable storage clips are supplied for transit.

Weight: 4.65kg+0.55kg cable, 6.4kg inc. packaging.

IP Rating: IP30

The front of the unit is easily removed for cleaning using the reclosable fastener strip. (This must be pressed firmly back all round when closing). The ChromaPanel is supplied with corner fixings to give extra security of fixing to the front panel when mounted vertically.

Fixing: Suitable for use in suspended ceilings. Can be bolted to on the rear with 4x M6 bolts into threaded hexserts or wood screws can be put through the M6 hexserts on 440mm square centres.

7572 Sheet 3 of 6

TM

LowProfile ChromaHeart

TM


TM



24506B

4445

4447

-

-

-

TM

Low Profile ChromaHeart

PCB Term. 5 Pole 90 Deg. Plug Grey

In-line colour coded socket

Weight: 230g. IP Rating: IP00

Beam Angle: 20 deg.

Optics: Light diffusion filter supplied, part number 5778. Beam shaping optics also available but as with the diffuser, they will need to be held in place by the user.


Fixing Detail: See detail specification sheet for the ChromaHeart part number 7576 available from Pulsar

Connection: Solder pads are provided to keep the size to a minimum. Also a right angle PCB mounted plug is provided that can be soldered into the rear PCB for a plugable connection to the L-P Heart.

Each Low Profile ChromaHeart is also supplied with two colour coded WAGO sockets.

Colours and finishes: Black paint B only.

Care must be taken not to obstruct the air flow around the unit.

This unit can be used in a sealed enclosure, provided that the oenclosure has sufficient surface area to keep it below 40 C in

normal use.

The Low Profile ChromaHeart does not have an incoming air filter like the ChromaHeart. If the air is recirculating no filter is needed. If however air is being drawn into an enclosure, use of an air filter is recommended.

70

90

TM

ChromaHeart

TM

ChromaHeart

TM

ChromaHeart

Specification

The Low Profile ChromaHeart is similar to the ChromaHeart but has a shallower depth. It is made available for customers who wish to use this versatile light source in their own equipment. Size 88 x 105 x 105mm. Will fit in a 111mm dia. tube. See data sheet 7576 for detail of use.




CSphere300

CPAR36CanS

CPAR36CanB

-

-

-

TM

ChromaSphere 300

TM

ChromaPAR36Can SilverTM

ChromaPAR36Can Black

TM ChromaSphere

TM ChromaSphere

TM ChromaSphere

TM ChromaPar36Can

TM ChromaPar36Can

TM ChromaPar36Can

ChromaSphere Specification

A 300mm diameter globe LED lighting fixture for indoor / outdoor use.

Fixing Detail:Each unit is fitted with an M6 eye bolt and also supplied with a ground mounting spike for outdoor use.

Power Requirement: 520mA @ 24V DC (12.5W) Max.Weight: ChromaSphere 1.5kg inc 5m of cable.

IP Rating: IP66.

If used with a power supply other than a ChromaZone, it must comply with the relevant safety standards.

For your safety the ChromaZone must be Earthed and fed via a Residual Current Circuit Breaker.

If the base of the ChromaSphere is removed, the sealing surfaces and gasket must be clean and dry before re-assembly.

Cleaning: The unit may be cleaned with clean water and a mild detergent solution.

Connection: 5m of 8mm diameter ChromaFlex 5 core cable terminated with an In-Line WAGO socket. Waterproof connectors are available from Pulsar - see ChromaScape.

Each ChromaSphere is also supplied with a colour coded WAGO socket and plug for making extension leads.

Colours and finishes: White opal sphere only.

ChromaPar36Can

An Aluminium PAR36 Can containing a ChromaHeart.

Fixing Detail: The fixing strap has a 13mm diameter hole for use with an M12 bolt.

Power Requirement: 520mA @ 24V DC (12.5W) Max.Weight: ChromaParCan 1.03kg + 0.55kg (5m) of cable.

IP Rating: IP20.


Light Output @1m White (RGB100%) 1000 Lux, Red 350 Lux, Green 750 Lux, Blue 85 Lux. A fixing handle is supplied with holes as shown.

Connection: 5m of 8mm diameter ChromaFlex 5 core cable terminated with an In-Line WAGO socket.

(The ChromaSphere is also supplied with a colour coded WAGO socket and plug for making extension leads.

Colours and finishes: Natural Aluminium and Black Painted.

7572 Sheet 4 of 6

TM Ground Mount TM Ground Mount

TM ChromaScape

TM ChromaScape


CScape120B

CScape120GM

4457

-

-

-

TM

ChromaScapeTM

ChromaScape Ground Mount

Buccaneer Waterproof Connector

TM ChromaScape

131.0

94.0

78.0

26.0

130.083.0

156.0

Fixings available

13.0mm Dia.

7.0mm Dia.

TM Ground Mount

ChromaScape / Ground Mounting Specification

A LED lighting fixture for outdoor / underwater use. If used with a power supply other than a ChromaZone, it must comply with the relevant safety standards.

For your safety the ChromaZone must be Earthed, fed via a Residual Current Circuit Breaker and local isolator fused for the maximum current taken by the load.

Power Requirement: 520mA @ 24V DC (12.5W) Max.Weight: ChromaScape 1.1kg+0.55kg cable. Ground Mount 0.65kg

IP Rating: IP68 2m. For use in fresh water. Not for use in salt water or water treated with Chlorine or Bromine.

If the front bezel of the ChromaScape is removed, the sealing surfaces and gasket must be clean and dry before re-assembly.

Beam Angle: 20 deg. The beam alignment is adjustable +/- 7 deg. within the ChromaScape enclosure. When the unit is ground mounted this enables the beam placement to be adjusted.Optics: Light diffusion filter supplied.



Fixing Detail: A fixing handle is supplied with holes as shown.

An optional ground mounting kit is available. The cast mounting ring and plastic tube may be cemented into position and have the ChromaScape fixed to the mounting ring. This is done by removing the front bezel of the ChromaScape and using the screws provided, screw the ChromaScape body to the mounting ring. The front bezel of the ChromaScape is then replaced noting that the sealing surfaces and gasket must be clean to give a water tight seal.

Allowing ingress of water into the ChromaScape invalidates the guarantee. Units must be checked after initial installation and periodically for water ingress.

Connection: 5m of 8mm diameter ChromaFlex 5 core cable terminated with an In-Line WAGO socket (The

Cast MountingRing

140mm o.d. Plastic Tube164.0

169.0

ChromaStrip Specification

Three versions of this unit are available that are housed in a 900mm, 600mm and 300mm long polycarbonate tube respectively.

Power Requirement:

CS900 - 520mA @ 24V DC (12.5W) Max.

CS600 - 347mA @ 24V DC (8.3W) Max.

CS300 - 173mA @ 24V DC (4.2W) Max.

Weight:

CS900 - 1.25kg inc. ChromaFlex



Connection: In-Line WAGO socket terminating 5m of ChromaFlex. Each ChromaStrip is also supplied with a colour coded WAGO socket and plug.

Beam Angle: Two versions are available with a 20 degree and a 90 degree beam angle

The total light output of the 900mm strip is the same as the o o.ChromaHeart but distributed over the linear strip at 20 or 90

Each ChromaZone output can supply 900mm of strip i.e. 3x 300mm or a 300mm and a 600mm length.

IP Rating: IP65

Fixing Detail: Two CableTies and Two Cable Tie Saddles are supplied with each unit. If used outside these parts should be replaced with a weather resistant type.


CS900-20

CS900-90

CS600-20

CS600-90

CS300-20

CS300-90

-

-

-

-

-

-

TM oChromaStrip 900 20 beam angleTM oChromaStrip 900 90 beam angleTM oChromaStrip 600 20 beam angleTM oChromaStrip 600 90 beam angleTM oChromaStrip 300 20 beam angleTM oChromaStrip 300 90 beam angle

300 / 600 / 900

55

7572 Sheet 5 of 6

EMC - EN50081-1, EN55022, EN50082-1 Marking Directive 93/68/EEC - The ChromaFixtures meet both the EMC directive 89/336/EEC and the Low Voltage Directive 72/23/EEC.

FAs the heat generated by the ChromaFixtures is relatively low, no special precautions are required with regard to normally flammable surfaces.

Standards - The ChromaFixtures comply with the following International and National standards:

ChromaFixtures are low voltage units operating on 24V d.c. Without direct connection to the mains supply, they are therefore inherently safe as they operate from less than 75V d.c. as specified in the Low Votage Directive 73/23/EEC

CHROMAFIXTURE STANDARDS

GUARANTEE - 12 months from the date of original purchase. The guarantee is limited to parts and labour. The guarantee is void if the unit is mis-used or repairs are performed by unauthorised persons. In the unlikely event of a faulty occurring, return the unit, with a description of the fault, to your supplier or direct to Pulsar for immediate attention.

ChromaScape

TM ChromaStrip

TM ChromaStrip

TM ChromaStrip

ChromaScape rear cable gland requires cable of between 7mm and 8mm to be used). For in-ground burial the cable must be sleeved.

Each ChromaScape is also supplied with a colour coded WAGO socket and plug for making extension leads.

Colours and finishes: Black paint B.

For underwater use waterproof connectors are available from Pulsar.

126.0

TMChromaBank LightPipe

TMChromaBank LightPipe

TM

ChromaBank

TM

ChromaBank

TM

ChromaBank1292

1370

122

90

253230

STACKING PITCH 155


24504B

24504W

CB-LP

-

-

-

TM

ChromaBankTM

ChromaBankTM

ChromaBank Light Pipe

(Black)

(White)

Pulsar’s ChromaBank is an LED lighting bar which contains 12 TM ChromaHearts (the LED lighting module as used in the

ChromaLight, ChromaDome and ChromaFlush) and has a built in ChromaZone controller. For further details refer to the ChromaZone data sheet.

TM

Each ChromaBank is supplied with a standard diffuser and a reeded acrylic wide angle lens.

ChromaBank Light Pipe is a 150mm dia. opal acrylic tube that is mounted with the fixing kit on to the front of a ChromaBank. The pipe mixes Red, Green and Blue light together to produce the resultant colour with a wide viewing angle. If the knobs at the end of the ChromaBank are replaced with M6 bolts the light pipes are end stackable.Fixing: Two M4 Posipan screws near the front on the end of the ChromaBank are removed and replaced with the M4x20mm posidrive pan head screws from the fixing kit and used to hold the brackets - with the tabs inwards in position. The Tube is laid on to the fixing brackets and the M6 screw and cup is used with the M6 Nylock to hold the tube in position. Do not over tighten the nut. Remove protective film from tube before use.

7572 Sheet 6 of 6

TMChromaBank LightPipe1322.0

The end plate of the BlackChromaBank allows stacking,using the holes as shown.

The White ChromaBank doesnot have the stacking end plates.

DIMENSIONS IN mm

SCALE NTS

DRAWN

1 PLACE

+/- 0.1+/- 0.2 o+/- 1

2 PLACES ANGLES

TOL:UNLESS OTHERWISE STATED

CHK MLG

CHANGE DESCRIPTIONREV

1

2

Production Issue

Diffuser Added

DRG No.

TITLE

DATE

2.10.01

18.02.01SHT 1 OF1 SHTS

MLG

ChromaHeartInstruction Leaflet

7576C PULSAR 2001

C L

12.5

4.4Dimension toouter edge

90.0 od.

28.1

o 120 o 120

Rear View of ChromaHeart

Filter - Prevents ingressof foreign bodies.

Rear Cover

Rear of unit fitsinto 98.0 dia. ring Max diameter

of unit 110mm

Side View ChromaHeart

Typical application (ChromaFlush)Section view showing air flow paths.

Noteso o1. Ambient temperature range 0 C to 40 C

2. It is important to allow free air flow for cooling as shown in the typical application.

3. D 0.75mm thick GE Lexan Martec HP12 is recommended for general use. A 99.0mm diameter disc is supplied. A 117.0 mm dia. disc and 1280.0 x 116.5mm sheet are also available.

4. For use in a sealed enclosure: Max dissipation 10.8W (RGB Full on), typical dissipation 5.4W. The fan must be allowed to circulate the air freely within the sealed enclosure. The level of the Red, Green and Blue inputs must be reduced if necessary to ensure that the air temperature inside the unit does not exceed

iffuser -

o40 C ( or LED life will be reduced).

5. Patents applied for.

88

Fan

FilterRearCover

Reflector

The ChromaHeart can be mountedat this point using a plate with a6.5mm dia. hole and an M6 lock nut.

62.0

Diffuser

Front gasket to keep LED’sand reflector clean. Availablein 115mm and 130mm diameters.

PULSARPULSAR



Patents Applied For

Bk R G B W


Tel: 44(0) 1223 366798 www.pulsarlight.com

HeartChromaHeartChroma TM

Serial No.

Diffuser

In

struction

s

Pulsar Light of Cambridge Limited Henley Road Cambridge CB1 3EA England Tel: 44 (0)1223 366798 Fax: 44 (0)1223 460708 Email: [email protected] Web: www.pulsarlight.com

Disassembly

1. Remove eyeball (A) from outer ring (B) by pushing eyeball across to compress one of the spring loaded brass pins (C) and pulling eyeball from front of ring. Remove spring loaded pins from eyeball.

2. Remove plastic ceiling clips (D) from outer ring by fully compressing with pliers across slot near to pivot and twisting out, as shown below. The outer ring is now ready for painting.

3. Remove 3x cross point screws and shake proof washers from rear of eyeball. Note construction. The rear cover (F) and filter foam (G) can now be removed. Remove ChromaHeart (H - shown below) from rear of eyeball, by pivoting as shown below but with a slight twist.

The Eyeball is now ready for painting.

(E)

TM ChromaLight Self Paint

Instructions for painting and assembly.

You will need:A medium cross point screwdriverMedium size pliers

You should receive:A ChromaLight partially assembledA plastic bag containing: Reflector6x small plastic spacersFront diffuser disc8x foam pads

Sectional view of finished ChromaLight

A

B

Cx2

Dx2

Ex3F

G

7594 Sheet 1 of 2

H

Removing ChromaHeart from Sphere

Reconstruction

1. Fit plastic (D) clips into outer ring, as shown above

Apply force here

Rotateout / in D

Plastic ceiling fixing clip

J

Ix6

KL

In

struction

s


2. Fit friction foam pads (J) as shown below. Note that they fit near the rear edge.

7594 Sheet 2 of 2

3. Fold up white foam at sides and put Chromaheart (H) into sphere (A) from rear. Fit filter (G) and rear cover (F) and then three M3x12 screws and shake proof washers (E).

J

Jx8

4. Turn unit over fit six plastic spacers (I) to LED’s in positions as shown, a

Insert reflector (K) noting the position of the top row of LED’s with the centre position missing (X). This is done by squeezing the sides of the reflector to distort it slightly and sliding it in, over the tops of the LED’s. Push reflector down on to spacers taking care to have top of reflector 3mm above top of LEDs. Allow glue to dry.

It may be necessary to bend some of the LED’s to acheive an even colour balance.

pplying a small amount of clear adhesive to the four corner spacers. Do not use Cyanoacrylate adhesive (Superglue) as it ‘blooms’ and produces a white mist on surrounding components.

5. Push in front diffuser (L) with the frosted side on the outside.

6. Put spring loaded brass pins (C) into the holes on the side of the sphere (A).

7. Put one spring pivot into the recess. Using a small piece of card (M) to protect the paint on the inner edge of the ring depress spring loaded pin (1) and push into place (2), see below.

Leave the unit for 24 hours to allow the friction foam to compress to allow the eye to rotate with the correct friction.

X

View of front of PCB

Ix6

Rear view of outer ring.

Section view of outer ring.

Sectional view of ChromaLight showing method of fitting Eye into outer ring

A

B

Cx2

Dx2

EF

G J

Ix6

KL

M

1

2

TM ChromaLight Self Paint

In

struction

s


Disassembly

1.

2.

3.

Remove plastic ceiling clips (A) from outer ring by fully compressing with pliers across slot near to pivot and twisting out, as shown above.

Remove 3x cross point screws (B) and shake proof washers from rear of metal outer. Note construction. The rear cover (C) and filter foam (D) can now be removed. Remove ChromaHeart from the front of the metal outer.

The metal outer is now ready for painting.

TM ChromaFlush Self Paint

Instructions for painting and assembly.

You will need:A medium cross point screwdriverMedium size pliers

You should receive:A ChromaFlush partially assembledA plastic bag containing: Front diffuser disc

7595 Sheet 1 of 1

Reconstruction

1. Fit plastic (A) clips into outer ring.

2. Slide the Chromaheart into the metal outer from the front. Fit filter (D) and rear cover (C) and then three M3x12 screws and shake proof washers (B).

3.It may be necessary to bend some of the LED’s to acheive an even colour balance.

5. Push in front diffuser (E) with the frosted side on the outside.

Apply force here

Rotateout / in A

Plastic ceiling fixing clip

Sectional view of finished ChromaFlush

Ax2

C

D

B

ChromaHeartAssembly

E

ChromaHeartAssembly shown

being slid intoouter cover

ChromaRange Connectors

Conn. M4448

Conn. F4447

TM ChromaLight

TMChromaFlush

PCB Conn. M4445

Conn. F4447

Conn. F4447

Conn. F4447

TM ChromaPanel

ChromaFlex - 5m

TM ChromaStrip

ChromaFlex - 5m

Conn. F4447

Conn. F4447

Conn. M4448

TM ChromaScape

TM

ChromaHeart

Conn. F4447

Conn. F4447

Conn. F4447

Conn. F4447

PCB Conn. M4445

TM

Low Profile ChromaHeart

PCB Conn. M4445

Conn. F4447

Conn. F4447

Conn. M4448

ChromaFlex - 5m

mlg 17-1-03 ChromCon.cdr

Shroud Set 4456 - Use this number to order spares

1x 4449 Cover set

1x 4451 Clamp 2x 4453 Screws In a medium clip bag 4236.

ChromaFlexWhite 8075

ChromaFlexBlack 8074

TM ChromaDome

ChromaFlex - 1.5m

Conn. M4448

Conn. F4447

Conn. F4447

Shroud1x Covers1x Clamp2x Screws


4mm Hex Key

TM ChromaPar36Can

TM ChromaSphere

TMChroma Fanless Flush

Conn. F4447

Conn. F4447

Conn. M4448

ChromaFlex - 5m

ChromaFlex - 1.5m

Conn. M4448

Conn. F4447

Conn. F4447



chromarange ~ chromazonepremier-solutions.biz/user guides/pulsar/chroma range.pdf · the chromazone...

Documents