cirrus-4t · data logging thedevice works as a datalogger with internal triggers, it can monitor...
TRANSCRIPT
Cirrus-4T
IOT datalogger for industrial, tracking and smart cities applications
Main features State of the art board, with all communication channels needed to fullfill
any IOT application– GPRS / 4G / NB-IOT / LTE-CAT-M1 cellular options.– WIFI.– ETHERNET.– RS485.
LORA wireless transceiver. BLE 4.2 and Bluetooth 5.0 GNSS receiver option for tracking functions RS485 with MODBUS – RTU. Internal sensors: accelerometer and temperature. 2 x Connector for external I2C analog probes. Power supply range from 5 to 28Vdc, with very low power consumption
( 20mA @ 12V ) 3 analog / digital inputs 1 optocoupled input. 2 open drain ouputs Several housing options, DIN-RAIL and IP65/67. Certified solution for security systems extendable to other configurations.
Data logging The device works as a datalogger with internal triggers,
it can monitor any data from main board input channels, main board sensors, external probes sensors, wireless sensors and RS485 MODBUS data.
Internal queue of 126K measurement with 32 bit resolution.
The device stores information internally and can deliver it when communication channel is available.
There can be assigned triggers to the input data, being the device capable of activating ouputs and sending alarms to automation software without cloud logic.
3+1 Inputs / 2 Outputs / 4 relays
Inputs 3 analog / digital inputs, ground referenced, NO, NC and
EOL resistor sensors and contacts can be connected. By means of 150R 0.1% pull down resistors 4..20mA probes
can be connected to these inputs. 1 Optocoupled digital input. 2 connectors for I2C sensor probes.
2 Open drain outputs capable of 200mA current. The ouputs can be activated by means of internal
logics or from remote Cloud control.
ModelsI/F-CIRRUS-GLBW
Industrial IOT data logger with GPRS, LORA , Bluetooth and WIFI interfaces
4 Modules DIN RAIL.
Mains (IF) of 12/24V powered.
2 optional relay ouputs.
ModelsEBF-CIRRUS-GL
Smart cities and smart farming IOT data logger with GPRS/NB-IOT, LORA, Bluetooth
IP 55 housing.
Internal power supply
2Ah 13.8V Battery backup
Optional 8 MODBUS relay
Module.
ModelsEBS/P-CIRRUS-GL
Smart cities and smart farming IOT data logger with GPRS/NB-IOT, LORA, Bluetooth
IP 67 housing.
Mains or 12-24V powered.
Internal battery backup
EBS model with solar power.
EBP model with internal primary
Batteries (4xC) at very low power
consumption ( 55uA )
ModelsB-CIRRUS-GP / BSR-CIRRUS-GP
Machinnery/Cold chain data logger with GPRS/NB-IOT, LORA, Bluetooth and GNSS receiver
IP 55 housing.
12-24V powered.
Internal battery backup
BSP model has integrated probe.
Can work with primary batteries
At very low power consumption
SIMCARD VPN All Nuvathings products are intended to work
with VPN simcard which is integrated in NUVA cloud.
Safety of communications is fully guaranteed as long as all channels use asymmetric cipher chains.
Enables the use of FIXED private Ip’s with 100% time availability and low data consumption.
No unwanted traffic.
Dashboard NUVA The main screen of the NUVA platform provides
full information at first sight. There is a briefing of the devices status at the top.
It locates the company branches and devices in an interactive map.
This map has a set of display filters, which can locate devices in alarm, failure and disarmed.
There is also at top an indicator for user’s notifications, where these can be viewed, activated and deactivated.
LORA MESH NETWORKThe devices provided with LORA transceiver automatically form a two-way mesh network between eachother, that enables long range and high inmunity against interference, data transmission and download communication.
This network provides best in class reliability to data communications, so link failure is to be a matter of the past, as long as faulty IP connections will balance between them using LORA link.
Seamless connectivy
Dashboard NUVA
Device tracking
Analog values view
Clod device configuration
APPsAll functions of the NUVA platform are
offered in a Android / IOS App.