cisco 350-080 exam questions & answers · b. the mds 9100 family of switches is an excellent...

55
CISCO 350-080 EXAM QUESTIONS & ANSWERS Number : 350-080 Passing Score : 800 Time Limit : 120 min File Version : 45.0 http://www.gratisexam.com/ CISCO 350-080 EXAM QUESTIONS & ANSWERS Exam Name: CCIE Data Center Written Exam

Upload: others

Post on 02-Jun-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

CISCO 350-080 EXAM QUESTIONS & ANSWERS

Number: 350-080Passing Score: 800Time Limit: 120 minFile Version: 45.0

http://www.gratisexam.com/

CISCO 350-080 EXAM QUESTIONS & ANSWERS

Exam Name: CCIE Data Center Written Exam

Page 2: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Selftestengine

QUESTION 1FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are theadvantages of using FabricPath technology? (Choose three.)

A. FabricPath provides MAC address scalability with conversational learningB. Loop mitigation with TTL in the frame fieldC. STPl independenceD. 10 Gbps bandwidthE. Layer 2 extensions between data centers

Correct Answer: ABCSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module ispowered on, but the interfaces are all in VDC0. What is the reason for this?

A. The chassis needs an EPLD upgrade to support the new module type.B. The default VDC cannot support F2 modules.C. The interfaces must be allocated into a VDC for F2 modules only.D. The module has failed GOLD diagnostics, and the switch has isolated the ports to protect the integrity of the

system.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 3Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core?(Choose three.)

A. virtualizationB. unified I/OC. support for 48-port Gb/s line cardD. support for Data Center Service ModulesE. high performanceF. high availability

Correct Answer: BEFSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 4

Page 3: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Which statement about Cisco Unified Fabric switches is correct?

A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.C. The Nexus 7000 Series Switches can support the NPIV mode of operation, but cannot function as a

complete Fibre Channel Forwarder.D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre

Channel Bridge functions.

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 5What is the use of NPV in Cisco Unified Computing Systems? (Choose two.)

A. Compatibility with third-party Fibre Channel switchesB. Faster throughputC. Reduce domain IDs in a Fibre Channel environmentD. Support for increased number of VSANsE. Support for SAN port channels

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:

http://www.gratisexam.com/

QUESTION 6Which three flow-control port states lead to enabled link flow control? (Choose three.)

A. Receive port: Enabled, Transmit port: EnabledB. Receive port: Enabled, Transmit port: DesiredC. Receive port: Enabled, Transmit port: DisabledD. Receive port: Disabled, Transmit port: DesiredE. Receive port: Desired, Transmit port: Desired

Correct Answer: ABESection: (none)Explanation

Explanation/Reference:Explanation:

Page 4: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 7In a configuration with redundant supervisors, how many IP addresses are required to configure full remoteaccess via management 0?

A. two IP addresses, one for each supervisorB. three IP addresses, one virtual IP and one physical IP for each supervisorC. one IP address that is shared among supervisorsD. none--management 0 will use the IP address from the first SVI that is created

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 8Enabling jumbo frame support on a Cisco Nexus 5500 Switch can be done through which method?

A. changing the default policy map from a default MTU of 1500 to 9216B. using the command system jumbomtu 9216C. using the command interface MTU 9216D. configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 9DCNM is capable of monitoring the network performance of a SAN. What are the three primary areas of thisoperation?

A. analyze traffic, device management, and network monitoringB. DCNM-SAN, DCNM-LAN, and device managerC. definition of flows, information collection, and data presentationD. SNMP poll data, MIB analysis, and report generation

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 10DCNM device discovery is done by connecting to Cisco NX-OS devices and doing which three of these?(Choose three.)

A. collecting the running configurationB. raising the logging level to meet the minimum requirementC. discovering all devices by default

Page 5: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

D. discovering devices using multiple user accounts as long as they are administrator-level accountsE. using LLDP to discover network adaptors

Correct Answer: ABESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 11Cisco DCNM-LAN supports the configuration and monitoring of many Cisco NX-OS features, including whichtwo of these Ethernet protocols? (Choose two.)

A. GLBPB. HSRPC. IRDPD. VRRP

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 12A virtual port channel (vPC) allows links that are physically connected to two different Cisco Nexus devices toappear as a single port channel to a third device.

Which are the mandatory steps for configuring vPC? (Choose six.)

A. Enable feature vPCB. Define domainsC. Establish peer keepalive connectivityD. Create a peer linkE. Configure the peer link as a trunk portF. Create port channels and vPCsG. Define port channel load-balancing methodH. Make sure configurations are consistent

Correct Answer: ABCDFHSection: (none)Explanation

Explanation/Reference:Answer: A,B,C,D,F,HExplanation:

QUESTION 13Refer to the exhibit.

Page 6: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

The network administrator is seeing N7K-1 having issues with VLAN 11, and interface VLAN 11 is resetting,causing frequent HSRP state changes. Which two actions would reduce HSRP state changes? (Choose two.)

A. On N7K-1, configure the HSRP extended hold timer to 180, extending the HSRP hello message hold time.B. On N7K-2, configure the HSRP extended hold timer to 180, extending the HSRP hello message hold time.C. On N7K-1, configure the pre-empt delay minimum to 180 in order to delay N7K-1 from taking over as the

HSRP active router.D. On N7K-2, configure the pre-empt delay minimum to 180 in order to delay N7K-2 from taking over as the

HSRP active router.E. On N7K-2, increase the HSRP priority to 150.F. On N7K-2, decrease the HSRP priority to 50.

Correct Answer: CESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 14Overlay Transport Virtualization (OTV) join interface is used to source the OTV encapsulated traffic and send itto the Layer 3 domain of the data center network.

Which statements are true about OTV join interface? (Choose three.)

A. Join interface is a Layer 3 entity, and with the Cisco NX-OS release 6.0, it can only be defined as a physicalinterface, physical subinterface, Layer 3 port channel, or Layer 3 port channel subinterface.

B. A single join interface can be defined and associated with a given OTV overlay.C. Multiple overlays can also share the same join interface.D. Join interface can be a loopback interface.E. The join interface is a Layer 3 entity that can be defined as a physical interface but not as a logical one.

Correct Answer: ABCSection: (none)

Page 7: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Explanation

Explanation/Reference:Explanation:

QUESTION 15Smart Call Home provides an email-based notification for critical system policies. A range of message formatsare available for compatibility with pager services, standard email, or XML- based automated parsingapplications. Destination profiles are used by Smart Call Home when sending notifications. Which of these arepredefined destination profiles supported by Cisco NX- OS Software? (Choose three.)

A. short-text-destinationB. prerecorded audio alertsC. CiscoTAC-1D. dial911E. full-text-destination

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 16Which description is correct for a private VLAN community port with respect to Layer 2 communications?

A. It communicates with all other community ports in the private VLAN domain.B. It communicates with only isolated ports in the private VLAN domain.C. It communicates only with other community ports in the same community and associated promiscuous

ports.D. It communicates only with associated promiscuous and isolated ports.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 17What does the mac packet-classify command do when applied to an interface configuration?

A. It enables MAC ACLs to be applied to only IP packets that enter the interface.B. It enables MAC ACLs to be applied to only non-IP packets that enter the interface.C. It enables MAC ACLs to be applied to all packets that enter the interface.D. It enables MAC ACLs to be used for QoS settings.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 18

Page 8: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

On Cisco Nexus 5000 Series Switches, where are the virtual output queues implemented, and what is the mainpurpose of virtual output queues?

A. on all ingress interfaces; to ensure maximum throughput on a per-egress, per-CoS basisB. on all ingress interfaces; to provide independent congestion management and 16 queuesC. on all egress interfaces; so that a congested egress port does not affect traffic directed to other egress portsD. on all egress interfaces; to prevent head-of-line blocking by utilizing multiple virtual output queuesE. on all egress interfaces; to be able to use EEE 802.1p CoS

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 19On the Cisco Nexus 7000 Series Switch, Control Plane Policing is enforced on which component?

A. The supervisor module enforces CoPP before out-of-policy traffic reaches the CPUB. The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPUC. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPUD. The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches the CPU

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 202012 Feb 23 23:00:08.676710 pim: [16132] (default-base) Received unauthenticated hello- message from10.1.1.2 on Ethernet1/18, message discarded

2012 Feb 23 23:00:12.528763 pim: [16132] (default-base) Send Hello with AH on Ethernet1/18 from 10.1.1.1,holdtimE. 105 secs, dr-priority: 1

You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pimneighbor e1/18 and confirmed there is no PIM neighbor on the interface.What is the problem based on the debug output?

A. The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.B. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to

Ethernet1/18.C. The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.D. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting to

Ethernet1/18.E. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

Page 9: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 21What is the benefit of using Anycast RP via RFC 4610 for IP multicast RP redundancy?

A. Improves convergence of the multicast network due to enhanced RPF checksB. Simplifies the number of control plane protocols over other RP redundancy methodsC. Eliminates the use of Protocol Independent Multicast (PIM) in the topologyD. Increases the administrative distances in Multicast Source Discovery Protocol (MSDP) configuration

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 22Which statement best describes ACL configuration using configuration session mode on Cisco Nexusswitches?

A. The verify command will validate commands entered for syntax errors.B. The save command will save the commands entered to the startup configuration.C. The network administrator can perform a dry-run ACL configuration by verifying the

configuration against the hardware and software resources available before applying it.D. Configuration sessions can be saved and resumed at any time, even after upgrading NX-OS Software on

the switch with ISSU.E. Configuration sessions are global for all VDCs on the Nexus 7000.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 23Overlay Transport Virtualization (OTV) uses the Authoritative Edge Device (AED) to perform which tasks?

A. The AED is responsible for sending all unicast traffic in a site, while either node in a site can transmitmulticast and broadcast.

B. The AED is responsible for load balancing all traffic for all VLANs across the transport network.C. The AED is responsible for handling all unicast, broadcast, and multicast traffic for a given VLAN within a

site.D. The AED is responsible for MAC address dispute contention for a given VLAN.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 24Which three statements about the DHCP snooping feature on Cisco Nexus switches are true? (Choose three.)

A. DHCP snooping commands are not available until the feature is enabled with the feature dhcp- snooping

Page 10: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

command.B. When you enable the DHCP snooping feature, the switch begins building and maintaining the DHCP

snooping binding database.C. The switch will not validate DHCP messages received or use the DHCP snooping binding database to

validate subsequent requests from untrusted hosts until DHCP snooping is enabled globally and for eachspecific VLAN.

D. Globally disabling DHCP snooping removes all DHCP snooping configuration on the switch.E. Globally disabling DHCP snooping does not remove any DHCP snooping configuration or the configuration

of other features that are dependent upon the DHCP snooping feature.

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:

QUESTION 25Which three statements describe user authentication in Cisco DCNM-LAN? (Choose three.)

A. Cisco DCNM-LAN server users are local to the Cisco DCNM-LAN server. Creating, changing, and removingCisco DCNM-LAN server users has no effect on user accounts on managed devices.

B. A Cisco DCNM-LAN server user that has Administrator privileges can push out changes to manageddevices even if the Cisco NX-OS role that is used on the discovered device has the network operator role.

C. Cisco DCNM-LAN user roles restrict the ability of users to make changes to Cisco DCNM-LAN serversettings. Cisco NX-OS user roles enforce read/write privileges on the discovered devices.

D. Cisco DCNM-LAN allows you to configure unique credentials for each discovered device or use defaultcredentials when you do not configure unique credentials for a device.

E. Cisco DCNM-LAN can use AAA servers to authenticate users. Only TACACS servers are supported.

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 26Nexus# conf t

Enter configuration commands, one per line. End with CNTL/Z.

Nexus(config)# interface Loopback10

% Permission denied

Nexus(config)# ?

no Negate a command or set its defaults

username Configure user information.

end Go to exec mode

exit Exit from command interpreter

What is the reason why this user is not able to enter configuration commands?

Page 11: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. The user did not enter enable prior to going into configuration mode.B. The software license installed on Nexus is Layer 2 only, which does not allow the creation of Layer 3

interfaces.C. The user RBAC role is set to network-operator.D. The user failed authentication and user access defaulted to read-only mode.E. The AAA server is currently not responding.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 27Which three statements describe the configuration change management feature in DCNM LAN? (Choosethree.)

A. Switch profiles allow configurations to be synchronized between switches and are supported with any CiscoNX-OS Software managed device.

B. DCNM LAN can archive configurations from devices even if they are not managed by the DCNM server,and the administrator can supply the device management IP address and credentials.

C. You can archive a maximum of 50 configuration versions per managed device.D. Managed devices must be licensed in DCNM LAN before they can be used with configuration change

management.E. Device-running configuration will be archived only if it differs from the last archived version.

Correct Answer: CDESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 28Which three statements best describe HSRP configuration on Cisco Nexus switches? (Choose three.)

A. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers willforward data traffic. No additional configuration is required.

B. In a vPC topology, the primary HSRP router will respond to ARP requests, but both HSRP routers willforward data traffic if the peer-gateway feature is enabled.

C. You can configure two overlapping HSRP groups to load share traffic from the connected hosts whileproviding the default router redundancy.

D. You can use the show standby command to verify HSRP operation and configuration.E. If you remove the feature hsrp command, all relevant HSRP configuration information is also removed.

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 29

Page 12: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Which statement describes SNMP functionality in Cisco NX-OS Software?

A. NX-OS Software supports one instance of SNMP globally for all VDCs; however, MIB counters are collectedand reported individually per VDC.

B. SNMP must be enabled with the feature snmp command before any SNMP configuration is possible.C. SNMP is always enabled by default in NX-OS Software and cannot be disabled.D. NX-OS Software supports 3DES and AES for SNMPv3 message encryption.E. SNMP always uses the default VRF on the Cisco Nexus 7000 Series Switches.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 30Which statement describes the graceful restart capability in Cisco NX-OS Software?

A. In NX-OS Software, the OSPFv2 graceful restart extension is Cisco proprietary and is only compatible withother Cisco routers.

B. A graceful restart allows OSPFv2 to remain in the data forwarding path through a process restart. WhenOSPFv2 needs to restart, it first sends a type 8 LSA, which includes a grace period that tells NSF helpers tokeep all LSAs that originated from the restarting interface.

C. Graceful restart helps keep an NX-OS system forwarding traffic transparently even if it experiences a coldreboot.

D. If the restarting OSPFv2 interface does not come back up before the end of the grace period, or if thenetwork experiences a topology change, the OSPFv2 neighbors tear down adjacency with the restartingOSPFv2 interface and treat it as a normal OSPFv2 restart.

E. OSPFv3 graceful restart must be disabled before doing an ISSU.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 31Which statement describes the XML management interface in Cisco NX-OS Software?

A. The following XML-based NETCONF operations are supported in NX-OS SoftwarE.close- session, copy-config, delete-config, and edit-config.

B. The following XML-based NETCONF operations are supported in NX-OS SoftwarE.close- session, copy-config, edit-config, and kill-session.

C. NX-OS Software supports up to a maximum of 16 concurrent XML sessions.D. Only show commands are supported via the XML management interface in NX-OS Software.E. The NX-OS implementation of the XML-based NETCONF requires SSH to be used for communication with

the device.

Correct Answer: ESection: (none)Explanation

Explanation/Reference:

Page 13: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Explanation:

QUESTION 32Cisco FabricPath uses what as a common bridge ID to connected Spanning Tree Protocol bridges?

A. C84C.75FA.6000B. 0100.5E11.02FDC. C84C.76FA.6000D. 4000.0000.0001

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 33Which statement describes OTV configuration on the Cisco Nexus 7000 Series Switches?

A. The OTV control-plane protocol uses the IS-IS protocol to establish adjacencies and exchange MACreachability across the overlay network. You must enable IS-IS with the feature isis command before OTVadjacencies can be established.

B. OTV uses an SSM group range for neighbor discovery and to exchange MAC reachability with other OTVedge peers.

C. The OTV join interface is a routed uplink interface on the edge device used to physically join the overlaynetwork.

D. The OTV internal interface encapsulates the site Layer 2 frames in IP unicast or multicast packets that arethen sent to the other sites.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 34How are IP multicast IGMP entries synchronized between vPC peers?

A. IGMP is not synchronized between vPC peersB. Cisco Fabric Service carries IGMP entries across the vPC peer linkC. IP ARP synchronization under the vPC domain configuration also synchronizes IGMPD. IGMP is flooded to the L2 domain, and there is no need to synchronize it between vPC peers

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 35Which option describes the default roles available to RBAC on Cisco Nexus switches?

A. admin, operator, network-admin, and network-operator

Page 14: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

B. admin, read-only, network-admin, and network-operatorC. vdc-admin, vdc-operator, network-admin, and network-operatorD. vdc-admin, vdc-operator, network-admin, and network-operator (for Nexus 7000) and network- admin and

network-operator (for other Nexus switches)E. admin and read-only

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 36What does the command "IP ARP synchronize" do in a vPC configuration?

A. Synchronizes ARP entries between vPC peers every five minutesB. Triggers a manual update of ARP entries from the primary peer to the secondaryC. Enables a bulk loading of ARP entries when a vPC peer is restoredD. Uses the peer-keepalive link to maintain ARP table consistency

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 37Nexus# sh ip igmp snooping vlan 120

IGMP Snooping information for vlan 120

IGMP snooping disabled

Optimised Multicast Flood (OMF) disabled

IGMP querier none

Switch-querier enabled, address 1.1.1.1, currently not running

IGMPv3 Explicit tracking enabled

IGMPv2 Fast leave disabled

IGMPv1/v2 Report suppression enabled

IGMPv3 Report suppression disabled

Link Local Groups suppression enabled

Router port detection using PIM Hellos, IGMP Queries

Number of router-ports: 0

Number of groups: 0

Active ports:

Page 15: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Po100 Po111

Which statement best describes what is depicted in the show command output?

A. IGMP snooping is not active for VLAN 120 because the IGMP feature has not been enabled on the switchwith the feature igmp command.

B. The IGMP snooping querier for VLAN 120 is not in a running state because the Loopback interfaceconfigured with 1.1.1.1/32 is currently in a down state.

C. IGMP snooping has been disabled on the VLAN 120 SVI.D. IGMP snooping has been disabled for VLAN 120 in VLAN configuration mode.E. IGMP snooping is not active for VLAN 120 because VLAN 120 does not exist in the VLAN database.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 38What is the default Time to Live (TTL) valuse in Cisco FabricPath?

A. 128B. 32C. 64D. Dependent on the number of switch IDs in the topology

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 39Assuming the local peer is 10.0.0.1 and the remote peer (configuration not shown) is 10.0.0.2, which of these isused to configure PIM Anycast-RP on a Nexus 7000 switch?

A. feature pim!interface loopback1ip address 10.0.0.1/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!interface loopback2ip address 2.2.2.2/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!ip pim anycast-rp 2.2.2.2 10.0.0.1ip pim anycast-rp 2.2.2.2 10.0.0.2ip pim rp-address 2.2.2.2 group-list 224.0.0.0/4

B. feature pim!interface loopback1

Page 16: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

ip address 10.0.0.1/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!interface loopback2ip address 2.2.2.2/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!ip pim anycast-rp 10.0.0.1 2.2.2.2ip pim anycast-rp 10.0.0.2 2.2.2.2ip pim rp-address 2.2.2.2 group-list 224.0.0.0/4

C. interface loopback1ip address 10.0.0.1/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!interface loopback2ip address 2.2.2.2/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!ip pim anycast-rp 2.2.2.2 10.0.0.1ip pim anycast-rp 2.2.2.2 10.0.0.2ip pim rp-address 2.2.2.2 group-list 224.0.0.0/4

D. feature pimfeature msdp!interface loopback1ip address 10.0.0.1/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!interface loopback2ip address 2.2.2.2/32ip router ospf 10 area 0.0.0.0ip pim sparse-mode!ip msdp originator-id loopback1ip msdp peer 10.0.0.2 connect-source loopback1ip msdp description 10.0.0.2 To 7010-2ip msdp password 10.0.0.2 mypassword!ip pim rp-address 2.2.2.2 group-list 224.0.0.0/4

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 40When using Overlay Transport Virtualization (OTV), how do L2 multicast frames traverse the overlay?

A. The L2 multicast frames are encapsulated in an OTV packet using the configured control-group multicastaddress for transport

B. The L2 multicast frames are dropped because multicast cannot be carried across the overlay

Page 17: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

C. The L2 multicast frames are encapsulated in an OTV packet using the configured data-group multicastaddress for transport

D. The L2 multicast frames are forwarded natively across the overlay based on their multicast IDs

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 41Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choosethree.)

A. Cisco NX-OS Software does not support PIM dense mode.B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast

configuration is possible on the switch.C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the

feature pim command.D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 42On a Cisco Nexus 7000 Series Switch, what is the purpose of this command?

switch# config terminal

switch(config)# mac address-table learning-mode conversational vlan 1-10

switch(config)#

A. Enable conversational learning on FabricPath vlans 1-10 for F-Series moduleB. Enable FabricPath protocol on VLANs 110C. No need for this command as conversational learning is enabled by default for all VLANs.D. Enable conversational learning on Classical Ethernet VLAN for F-Series module

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 43Where is a typical request in the Cisco UCS XML API placed in the data management engine, and, after therequest is confirmed, what is updated?

A. The request is placed in the transactor queue in FIFO order and the management information tree is

Page 18: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

updated.B. The request is placed in the replicator and persistifier and the store is updated.C. The request is placed in the data management engine and the application gateway is updated.D. The request is placed in the buffer queue and the commit buffer queue is updated.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 44In the Cisco FabricPath domain, one switch becomes the root for the multidestination tree. Cisco FabricPathswitches compare which three parameters to select the root? (Choose three.)

A. Root priorityB. System IDC. Bridge IDD. Switch IDE. Port IDF. Subswitch ID

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 45By default, what type of SSH server key is generated by Cisco NX-OS Software?

A. DSA key generated with 512 bitsB. RSA key generated with 768 bitsC. RSA key generated with 1024 bitsD. DSA key generated with 1024 bitsE. RSA key generated with 2048 bits

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

http://www.gratisexam.com/

QUESTION 46

Page 19: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Refer to the exhibit.

Which statements are true about the subswitch ID that is filled in the header? (Choose three.)

A. FabricPath switches running vPC use this field to identify the specific virtual switch.B. FabricPath switches running vPC+ use this field to identify the specific vPC+ PortChannel on which traffic is

to be forwarded.C. The subswitch ID field is locally significant to each vPC+ switch pair.D. The subswitch ID field must be unique within the FabricPath domain.E. In the absence of vPC+, this field is set to 0.

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:

QUESTION 47In a Cisco Nexus 7000 platform configured with GLBP, which GLBP timer can be tuned to prevent unnecessaryGLBP state changes during a switchover or ISSU?

A. GLBP redirect timerB. GLBP forwarder pre-empt delay minimum timerC. GLBP hold timerD. GLBP pre-empt delay minimum timerE. GLBP extended hold timerF. GLBP nonstop forwarding timer

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 48Refer to the exhibit.

Page 20: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

vPC+ is configured between which switches?

A. Switch-ID 13 and Switch-ID 23B. Switch-ID 11 and Switch-ID 12C. Switch-ID 100 onlyD. Switch-ID 13 and Switch-ID 100

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 49SNMPv3 authorizes management operations only by configured users and encrypts SNMP messages. Whichauthentication protocols does Cisco NX-OS Software use for SNMPv3? (Choose two.)

A. NMAC-SHA-96 authentication protocolB. HMAC-MD5-96 authentication protocolC. Community String Match protocolD. NMAC-MD5-96 authentication protocolE. HMAC-SHA-96 authentication protocol

Correct Answer: BESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 50Overlay Transport Virtualization (OTV) provides an overlay that enables Layer 2 connectivity between separateLayer 2 domains, while keeping these domains independent and preserving the fault isolation, resiliency, andload-balancing benefits of an IP-based interconnection.

Page 21: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Which statements are true about OTV Adjacency Server? (Choose two.)

A. Adjacency Server is required when OTV is deployed with unicast-only transport.B. Adjacency Server is required when OTV is deployed with multicast-enabled transport.C. Each OTV device wishing to join a specific OTV logical overlay needs to first register with the Adjacency

Server.D. Each OTV device trying to join a specific OTV logical overlay needs to be configured as an Adjacency

Server.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 51Which two statements about VACLs on Cisco Nexus 7000 Series Switches are true? (Choose two.)

A. A single VACL can be shared across two or more VDCs.B. Use of VACLs requires no special license to be installed.C. VACLs make use of IP or MAC ACLs.D. Only options drop and forward are permitted.

Correct Answer: BCSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 52Consistency checks and compatibility checks are performed before a Virtual PortChannel (vPC) is created.During a compatibility check, one vPC peer conveys configuration information to the other vPC peer in order toverify that vPC member ports can actually form a PortChannel.

Which statements about a "Virtual PortChannel graceful consistent check" are true? (Choose two.)

A. Graceful consistency check is enabled by default.B. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.C. Graceful consistency check is disabled by default, so to enable this feature, use graceful consistency-check

command under VPC domain configuration mode.D. When graceful consistency check is enabled, only the inconsistent VLANs on the secondary peer device are

suspended.

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 53Which attribute is used to pass the user role back to the Nexus when remote AAA is enabled?

A. Cisco AV-pair

Page 22: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

B. TACACS+ or RADIUS ack frame role attributeC. DH-CHAP challenge attributeD. privilege level attribute

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 54Each port that is configured to use LACP has an LACP port priority. Which statements are true about LACPport priority? (Choose three.)

A. Port priority value can be configured between 1 and 65535.B. A higher port priority value means a higher priority of LACP.C. Port priority can be configured so that specific links can be chosen as active links rather than the hot

standby links within the port channel.D. LACP uses the port priority with the port number to form the port identifier.E. LACP Port priority default value should always be changed

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 55Nexus7000# config t

Nexus700(config)# interface ethernet 2/11

Nexus700(config-if)# switchport mode private-vlan host

Nexus700(config-if)# switchport private-vlan host-association 14 50

Nexus700(config-if)# exit

Nexus700(config)#

What will this command sequence achieve?

A. associate interface E2/11 to community VLANs 14 and 50B. associate interface E2/11 to secondary VLANs 14 and 50C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

Page 23: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 56Which command will allow you to display the configured QoS group and the ingress buffer allocated to eachQoS group?

A. show interface priority-flow-controlB. show interface queuingC. show queuing interfaceD. show policy-map system type queuingE. show policy-map interface ethernet <x/y> type queuing

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 57Refer to the exhibit.

Page 24: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

During troubleshooting of Virtual PortChannel (vPC), it is observed that Virtual PortChannel 2 is in a down state.What's the cause of this issue?

A. Virtual PortChannel is down because LACP is not enabled on the remote switch.B. Virtual PortChannel is down because of a VLAN mismatch.C. Virtual PortChannel is down because of an MTU mismatch.D. Virtual PortChannel is down because of VLAN and MTU mismatch.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

Page 25: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Explanation:

QUESTION 58With Cisco NX-OS on a Cisco Nexus platform, which command shows memory usage, total processes, andCPU state?

A. show memory detailedB. show process cpu sortedC. show system resourcesD. show hardware capacity

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 59What is the difference between the Ethanalyzer and the SPAN feature in Cisco NX-OS?

A. The Ethanalyzer captures control-plane traffic, while SPAN captures all traffic.B. The Ethanalyzer captures all traffic including control-plane traffic, while SPAN captures only the control-

plane traffic.C. The Ethanalyzer captures only data traffic, while SPAN captures all traffic.D. The Ethanalyzer captures only control traffic, while SPAN captures data traffic.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 60Virtual PortChannels (vPCs) allow links that are physically connected to two different Cisco switches to appearto a third downstream device as coming from a single device and as part of a single port channel. Which of thefollowing are components of a Virtual PortChannel system? (Choose four)

A. Two peer devices: the vPC peers of which one is primary and one is secondary and are part of a vPCdomain.

B. A Layer 3 Gigabit Ethernet link called peer-keepalive link to resolve dual-active scenariosC. A redundant 10 Gigabit Ethernet PortChannel called a peer link to carry traffic from one system to the other

when neededD. vPC member ports forming the PortChannelE. A dot1q trunk between the vPC peersF. A management port that can be used as peer-keepalive link to resolve dual-active scenarios.

Correct Answer: ABCDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 61

Page 26: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Which two Fibre Channel features are not supported in Cisco Nexus 5500 and Nexus 5000 platforms? (Choosetwo.)

A. port securityB. fabric bindingC. IVRD. port trackingE. FICON

Correct Answer: CESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 62Refer to the exhibit.

Given this FCoE topology, host VFC interface and FC storage are in the same VSAN (VSAN 10). The VSAN isin the allow list for both ISLs. Both ISLs are up at 4 GB.

Which command can be issued on the N5K command line to confirm that SCSI traffic from the host to thestorage will flow across both links, as opposed to using only one link?

A. show fspf traffic vsan 10B. show vsan 10C. show trunk protocolD. show fcroute unicast vsan 10

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 63What is the correct order for FIP virtual establishment?

A. VLAN discovery, FCF discovery, FLOGI and FDISC, FC commandB. FCF discovery, VLAN discovery, FLOGI and FDISC, FC commandC. VLAN discovery, FCF discovery, FLOGI and FDISC

Page 27: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

D. FCF discovery, solicitation and advertisement, FLOGI and FDISC, FC command

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 64Which statement about the Adapter FEX feature on the Cisco Nexus 5000 Series Switches is true?

A. Adapter FEX is a software feature that can be configured on any CNA as long as the Nexus 5000 is runninga version of code that supports Adapter FEX.

B. Adapter FEX can be thought of as a way to divide a single physical link into multiple virtual links orchannels.

C. Packets on each channel are tagged with an 801.Q header that has a specific source VIF.D. When using a dual-homed NIC on the server, active/standby is not supported. Only active/active is

supported.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 65Which statement describes the below output from an MDS switch?

Flow ID. 44

Initiator VSAN: 200

Initiator WWN: 50:06:04:8a:cc:19:12:db

Target VSAN: 200

Target WWN: 50:06:04:8c:de:ad:be:ef

Target LUN: ALL LUNs

Flow Verification Status:

-------------------------

Initiator Verification Status: success

Target Verification Status: WWN was not found in name server

Initiator Linecard Status: success

Target Linecard Status: Status not yet checked

Feature Status:

---------------

Page 28: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Write-Acceleration enabled

Write-Acceleration Buffers: 1024

Configuration Status: flow verification failed

A. The zone containing both the initiator and target does not existB. The zone set has not been activatedC. The target is not logged into the fabricD. The pWWN used for the target is invalid

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 66Which mechanism do the CNA and the Cisco Nexus 5000 Series Switches use to provide a lossless class ofEthernet traffic?

A. LLDPB. LACPC. PFCD. FIP

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 67Which statement is correct about the number of available QoS system classes in FCoE?

A. It's hard-set and cannot be disabledB. It's configurable, with an upper limit of 16C. It's hard-set but cannot disable best-effort and Fibre ChannelD. It's hard-set but can disable all but one classE. It's configurable with an upper limit of eight

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 68When building a NIC team (virtual port channel) between a host and a pair of Cisco Nexus 5000 SeriesSwitches that will carry FCoE traffic, what is the maximum number of physical links that can exist in the team?

A. 1

Page 29: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

B. 2C. 4D. 5E. 16

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 69Which statement is true about The QoS Class Fibre Channel?

A. Cannot be disabledB. Cannot have the CoS changedC. Can have "Packet Drop" enabledD. Is multicast optimizedE. Can have the MTU changed

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 70Lossless Ethernet for FCoE is achieved through the use of which features? (Choose two.)

A. Priority flow controlB. Buffer-to-buffer creditsC. TCP retransmissionD. Ethernet checksumE. QoS policies

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 71Which command is used to determine if a host has logged in to the Fibre Channel fabric?

A. show flogi databaseB. show system fc loginC. show npv flogi-tableD. show npv fcns databaseE. show interface vfc X flogiF. show interface flogi

Page 30: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 72Traffic drop for FCoE is experienced across a Nexus 5548 switch. What is a possible cause?

A. Server's CNA does not support DCBX and PFC TLV was not negotiated.B. A "no-drop" class has not been configured for FCoE.C. The system is running with the default QOS policies.D. The link is oversubscribed.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 73On a Nexus 5000 Series Switch, when a VFC is not online, what are the causes? (Choose three.)

A. LLDP transmit and receive are disabledB. The initiator server has no connectivity to the target storageC. FIP negotiation timingD. Peer does not support LLDPE. VSAN trunk protocol has been enabled

Correct Answer: ABDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 74When configuring unified ports on a 5548 switch, which port ordering must be respected? (Choose two.)

A. Fibre Channel ports must be configured from the first port in the module.B. Ethernet ports must be configured from the last port in the module.C. Fibre Channel ports must be configured from the last port in the module.D. Ethernet ports must be configured from the first port in the module.

Correct Answer: CDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 75Which statement describes the FIP function of the FCoE Initiation Protocol?

Page 31: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. It is required to establish the point-to-point FCoE links with the first switch in the path.B. It is required to establish the point-to-point FCoE links with any switch across multiple Ethernet segments.C. It is not used to build the FCoE links.D. It is used to ensure lossless transport.

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 76Which Ethernet field is used to differentiate between the FCoE frame and the FIP frame?

A. Ethernet FCSB. Source addressC. Destination addressD. EtherTypeE. Protocol type

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 77What are the two parallel SCSI specifications? (Choose two.)

A. Up to 25 m bus lengthB. Only one device per SCSI busC. Up to 16 devices per SCSI busD. Half-duplex operationE. Full-duplex operation

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 78Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from thedirectly connected FCoE host?

A. The switch receives the FCoE frame and forwards it to another switch over its VE port.B. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the fabric over

its Fibre Channel uplink port.C. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the Fibre

Channel target over its Fibre Channel port.D. The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.

Page 32: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 79A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given theoutput of the show command below, what is the reason of this issue?

switch# show npv status

npiv is enabled

External Interfaces:

===============

InterfacE. fc1/1, VSAN: 1, FCID. 0x000000, StatE. Other

Number of External Interfaces: 4

A. NPV is not enabled on the core switch?B. The interface connected to the Core switch is in admin down stateC. The local host interface belongs to the wrong VSAN?D. The local host interface is not able to login

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 80Which three are valid methods to monitor and trend SAN port channels with DCNM? (Choose three.)

A. use summary view in the device managerB. from the DCNM-SAN client, view ISLs in real time from the Performance drop-down listC. for each port channel, select Monitor ContinuallyD. configure traps for each port channel to utilize RMONE. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance

collections

Correct Answer: ABESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 81A VSM is actually a virtual machine that requires how many vNICs for functioning?

A. 0

Page 33: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

B. 1C. 2D. 3E. 4

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 82When configuring vPC-HM CDP with multiple links to the same switch, are port-channels required?

A. Each link between the upstream switch and the VEM is an individual subgroup.B. Connections that go to the same upstream switch must be configured with the command channel-group

<number> mode active.C. Connections that go to the same upstream switch must be configured with the command channel-group

<number> mode passive.D. With vPC-HM CDP, the user can pin traffic from a specific VM to a specific uplink.E. Connections that go to the same upstream switch must be configured with the command channel-group

<number> mode on.

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 83How many VSM modes are there in a Cisco Nexus 1000V environment?

A. 0B. 1C. 2D. 3E. 4F. 5

Page 34: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 84Cisco IOS NetFlow gathers data that can be used in which three of these? (Choose three.)

A. accountingB. authenticationC. authorizationD. network monitoringE. network planning

Correct Answer: ADESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 85Which port channel command is recommended for N1KV on Cisco UCS?

A. channel-group auto mode onB. channel-group auto mode activeC. channel-group auto mode on sub-group cdpD. channel-group auto mode on sub-group manualE. channel-group auto mode on mac-pinning

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 86vPath is a critical component in the VNS architecture. Which two are functions of vPath? (Choose two.)

A. intelligent traffic steering to the VSGB. offloading the processing from the VSG to the VEMC. intelligent traffic steering to the VNMCD. offloading the processing from the VSG to the flow managerE. deep packet inspection

Correct Answer: ABSection: (none)Explanation

Explanation/Reference:

Page 35: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 87n1kv-l3(config)# show lacp offload status

Current Status : Enabled

Running Config Status : Enabled

Saved Config Status : Disabled

What two facts does the output signify? (Choose two.)

A. LACP is enabled on the Nexus 1000v.B. LACP will be offloaded to the upstream switch.C. LACP will be negotiated to the VM.D. LACP is negotiated by the VSM.E. LACP is negotiated by the VEM in all instances.

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 88The Cisco Nexus 1000V Series Switches are virtual machine access switches that are an intelligent softwareswitch implementation for VMware vSphere environments running the Cisco NX-OS Software operatingsystem. Together with the VMware ESX hypervisor, the Nexus 1000V supports Cisco VN-Link servervirtualization technology, which provides mobile virtual machine security and network policy for VMware Viewcomponents, including the DHCP snooping feature. DHCP snooping is disabled on the Nexus 1000V by default.

When the DHCP snooping feature is enabled on the Nexus 1000V, what are the default trust settings for thevEthernet and uplink ports?

A. All vEthernet ports are trusted, and all Ethernet ports such as uplinks and port channels are trusted.B. All vEthernet ports are not trusted, and all Ethernet ports such as uplinks and port channels are not trusted.C. All vEthernet ports are trusted and all Ethernet ports such as uplinks and port channels are not trusted.D. All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 89When using VSD, traffic flow goes from the virtual machine to which of these?

A. Upstream switchB. Virtual Supervisor ModuleC. VMware distributed switchD. VMware vSwitchE. Service virtual machine

Correct Answer: E

Page 36: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Section: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 90Given the following configuration, what command can be used to determine the physical path that traffic will besent out upon?

Port-profile type Ethernet name vm-data

Switchport mode trunk

Switchport trunk allowed vlan 200-210

Channel-group auto mode on mac-pinning

State enabled

Vmware port-group

No shut

Port-profile type vethernet name vlan-200

Switchport mode access

Switchport vlan 200

State enabled

Vmware port-group

No shut

A. module vem X execute vemcmd show trunkB. show module 3 internal pinningC. module vem X execute vemcmd show portD. show module vem mappingE. show interface vethX pinning

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 91What are the four vPath packet flow steps? (Choose four.)

A. perform flow lookupsB. intercept packets on service enabled portsC. run packets through the vPath flow managerD. classify the packetsE. flow manager emits an action for the packets

Page 37: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

F. enforce the action determined by the flow manager

Correct Answer: BCEFSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 92A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intendedfor use with an N1Kv.

Interface fastethernet 1/10

Switchport mode trunk

Switchport trunk allowed vlan all

Channel-group 10 mode on

No shut

Interface fastethernet 1/11

Switchport mode trunk

Switchport trunk allowed vlan all

Channel-group 10 mode on

No shut

Interface port-channel10

Switchport mode trunk

Switchport allowed vlan all

No shut

Which Port Channel configuration must be used on the Nexus 1000v port-profile?

A. MAC pinningB. Cisco Discovery Protocol pinningC. Mode OnD. Mode ActiveE. No port channel configuration

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 93DHCP snooping on Cisco Nexus 1000V Series Switches acts like a firewall between untrusted hosts and

Page 38: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

trusted DHCP servers by doing which of these? (Choose three.)

A. validates DHCP messages received from untrusted sources and filters out invalid response messages fromDHCP servers

B. intercepts all ARP requests and responses on untrusted portsC. builds and maintains the DHCP snooping binding database, which contains information about untrusted

hosts with leased IP addressesD. uses the DHCP snooping binding database to validate subsequent requests from untrusted hostsE. limits IP traffic on an interface to only those sources that have an IP-MAC address binding table entry or

static IP source entry

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 94A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 usingSPAN. The customer has another virtual machine configured as a sniffer host called VM002. Whatconfiguration is required, and what other changes will need to be made? (Choose two.)

VSM-PRI-188# sh int vethernet 5

Vethernet5 is up

Port description is VM001, Network Adapter 2

HardwarE. Virtual, address: 0050.56b0.001e (bia 0050.56b0.001e)

Owner is VM "VM001", adapter is Network Adapter 2

Active on module 5

VMware DVS port 484

Port-Profile is VM-vlan-10

Port mode is access

VSM-PRI-188# sh int vethernet 6

Vethernet6 is up

Port description is VM002, Network Adapter 1

HardwarE. Virtual, address: 0050.56b0.0020 (bia 0050.56b0.0020)

Owner is VM "VM002", adapter is Network Adapter 1

Active on module 5

VMware DVS port 485

Port-Profile is VM-vlan-10

Port mode is access

Page 39: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. Monitor session 1 type spanSource interface veth5 bothDestination interface veth6No shut

B. monitor session 1source vlan 10destination interface veth6no shut

C. monitor session 1 type er-spansource interface vlan 10destination ip 10.1.1.10no shut

D. VM002 must be removed from the Nk1VE. Move VM002 to Module 5F. Restart the VEM on module 5

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 95Given a host with two NICs assigned to a N1k profile, which topologies are suitable for this type of configuration(Choose three.)

port-profile type Ethernet name VM-Data

vmware port-group

switchport mode trunk

switchport allowed vlan 400-410

channel-group auto mode active

no shut

state enabled

A. Cisco UCS fabric interconnectsB. Pair of N5K's in VPC.C. Standalone N5KD. Pair of N5K's in non-VPCE. Cisco Catalyst 6000 Switch in VSS

Correct Answer: BCESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 96Which statements are valid for a local SPAN configuration? (Choose two.)

Page 40: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. Source and destination interface must be on the same hostB. Source and destination interfaces can be on different hostsC. Destination vEthernet interface can be on a different VLAN than the sourceD. Destination interface can be a physical portE. Destination interface cannot be a physical port

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 97What is the use of ERSPAN on N1kv?

A. Send monitored traffic to a VLANB. Send monitored traffic to a remote VEM over L2C. Receive monitored traffic on a vEthernet interfaceD. Send monitored traffic to an IP destination

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 98Given the following configuration:

port-profile type ethernet DATA-UPLINK

vmware port-group

switchport trunk allowed vlan 1-3967,4048-4093

channel-group auto mode on

no shutdown

state enabled

port-profile type ethernet MGMT-UPLINK

vmware port-group

switchport trunk allowed vlan 10-12

channel-group auto mode on

no shutdown

state enabled

VEMs are seen to be joining and then are lost from the Cisco VSM. How would you resolve this issue?

Page 41: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. Remove second NIC from each port profileB. Remove VEM from VSM (no vem X), remove NICs, and reinsertC. Ensure that VLANs on uplink profiles are not overlappingD. Reinstall VEME. Issue the command "module vem X execute vemcmd set pinning module vsm 1"

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 99The network administrator is adding a new N1Kv to the vCenter, however, the administrator does

not see the new switch under the networking tab of vCenter.

The administrator issues the following command on the VSM to troubleshoot:

VSM# show svs connections

connection VC:

ip address: 10.10.10.30

remote port: 80

protocol: vmware-vim https

certificatE. default

datacenter namE. DC1

DVS uuiD. 67 32 30 50 a6 d2 49 64-9e 1c 5f 49 e3 af 55 99

config status: Disabled

operational status: Disconnected

sync status: -

version: -

When attempting to fix the issue, the following error is seen:

VSM-PRI-188# conf

VSM-PRI-188(config)# svs connection VC

VSM-PRI-188(config-svs-conn)# connect

ERROR: [VMWARE-VIM] Extension key was not registered before its use

What is the cause of the error?

A. Missing control VLAN in VSM configurationB. Missing packet VLAN in VSM configuration

Page 42: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

C. VSM has no network connection to vCenterD. VSM extension key is not installed on vCenterE. vCenter extension key is not installed on VSM

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 100Refer to the exhibit.

An ESX host is added to a distributed switch but is never seen as a module in VSM. Given below configurationfrom VSM, what is the cause of this issue? (Choose two.)

VSM# show svs domain

SVS domain config:

Domain iD. 111

Control vlan: 500

Packet vlan: 501

L2/L3 Control modE. L2

L3 control interfacE. NA

Status: Config push to VC successful.

A. Missing VLAN 500 on Switch1 trunk to Switch2B. Missing VLAN 501 on Switch1 trunk to Switch 2C. VLAN 500 is not created on Switch2

Page 43: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

D. Interface VLAN 500 is missing on Switch1E. Interface VLAN 501 is missing on Switch1F. VLAN 111 is missing on all switches

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 101Why is a Cisco UCS B250 server unable to support 16-GB DIMMs?

A. Dual-rank DIMMs are not supported.B. 16-GB DIMMs are too slow.C. The largest DIMM an Intel 55xx or 56xx CPU can address is 32 GB.D. The memory bus would be too long.E. The blade would run too hot.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 102On a Cisco UCS B250 M2 server that is fully populated with 1333-MHz memory and an E5640 CPU, what is thefastest speed the memory can run at?

A. 800 MHzB. 900 MHzC. 1066 MHzD. 1333 MHzE. 1666 MHz

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 103Which two servers support memory extension technology and give list? (Choose two.)

A. B200B. C210C. B250D. C260E. C460

Correct Answer: CD

Page 44: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Section: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 104Which two statements about NPIV are true? (Choose two.)

A. After enabling NPIV, switch interfaces can only be placed into NP, F, or SD modes of operation.B. NPV devices log in to NPIV devices.C. NPIV requires the Enterprise License Package.D. NPIV is supported on the Cisco MDS, N7K, and N5K families of switches.E. A director class switch should not be placed into NPIV mode.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 105On a Cisco UCS B250 server, how many physical DIMM slots make up one logical DIMM?

A. 2B. 3C. 4D. 6E. 12

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 106Which statement about NPIV is true?

A. NPIV provides a means to assign multiple Fibre Channel IDs to a single N-port.B. NPIV can be enabled on a per-VSAN basis.C. NPIV requires a "write erase" and then reload the switch in order to come up into NPIV mode.D. NPIV is a Cisco proprietary feature and as such works only between two Cisco switches.E. NPIV must not be enabled on a switch that is also running N-port virtualization.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 107

Page 45: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

When it comes to creating pooled WWN objects, it is important to understand that a Cisco UCS WWN pool caninclude only WWNNs or WWPNs from which value of ranges?

A. from 10:00:00:00:00:00:00:00 to 10:FF:FF:FF:FF:FF:FF:FFB. from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FFC. from 30:00:00:00:00:00:00:00 to 30:FF:FF:FF:FF:FF:FF:FFD. from 40:00:00:00:00:00:00:00 to 40:FF:FF:FF:FF:FF:FF:FF

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 108Cisco UCS Manager provides the ability to manage power utilization to the blades. Which two statements aboutUCS Manager power policies are true? (Choose two.)

A. Power capping helps mainly in reducing data center footprint.B. Power capping helps reduce data center cooling.C. A single power cap group policy allows you to set power limits across multiple UCS domains.D. You can have multiple power cap groups per UCS domain.E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:

Explanation:

QUESTION 109Regarding disk scrub, which two of these occur to the data on any local drives upon disassociation? (Choosetwo.)

A. If disk scrub is enabled, all BIOS settings for the server are erased.B. If disk scrub is enabled, all the data access on any local drives is destroyed.C. If disk scrub is enabled, the LSI active RAID is destroyed but data is still preserved.D. If disk scrub is disabled, all data on any local drives is preserved, including the local storage configuration.E. If disk scrub is enabled, all data on any local drives is preserved, including the local storage configuration.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 110In the event of a catastrophic disaster, after which you need to replace the entire UCS blade system (that is,new fabric interconnects, new IOMs, new chassis, and new blades), what type of backup would provide themost complete set of information?

Page 46: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. logical configurationB. all configurationC. full stateD. system configuration

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 111When creating a QoS policy dialog box in Cisco UCSM, which four fields can be modified? (Choose four.)

A. nameB. best-effortC. burstD. rateE. host control

Correct Answer: ACDESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 112Which policy determines what happens to local data and to the BIOS settings on a server during the discoveryprocess and when the server is disassociated from a service profile?

A. boot policy and BIOS policyB. disk scrub and boot policyC. BIOS setting scrub, boot policy, and BIOS policyD. disk scrub and BIOS setting scrub

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 113Which of these commands will allow you to set end-host mode for SAN connectivity?

A. UCS-A # scope fc-uplinkUCS-A /fc-uplink # set mode end-hostUCS-A /fc-uplink* # commit-buffer

B. UCS-A# scope eth-uplinkUCS-A /eth-uplink # set mode end-hostWarninG.When committed, this change will cause the switch to reboot UCS-A /eth-uplink* # commit-buffer

C. UCS-A# scope fabric-interconnect aUCS-A /fabric-interconnect # set mode end-host

Page 47: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

UCS-A /fabric-interconnect* # commit-bufferD. UCS-A# scope system

UCS-A /system* # set mode end-hostUCS-A /system* # commit-buffer

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 114Which two statements about QoS options in a Cisco UCS environment are true? (Choose two.)

A. The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.B. Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and

receive IEEE 802.3x pause frames when the send buffer for a port fills.C. If no system class is configured as CoS 0, the Fibre Channel system class is used.D. The user can configure QoS for these system classes: platinum, gold, silver, best effort, Fibre Channel.E. When configuring a system class, the type of adapter in a server may limit the maximum MTU supported.

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 115Where are Cisco UCS vNICs created?

A. In the blade BIOSB. In the operating systemC. In the service profileD. In the card option ROM

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

http://www.gratisexam.com/

QUESTION 116Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true?(Choose two.)

Page 48: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

A. End-host mode is synonymous with NPV mode.B. In end-host mode, only hard pinning of vHBAs to Fibre Channel uplink ports is allowed.C. Making configuration changes between Fibre Channel switching mode and end-host mode is nondisruptive.D. End-host mode is the default Fibre Channel switching mode.

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 117What is the appliance port used to connect to in a Cisco Unified Computing System?

A. Fibre Channel storageB. UCS C-Series serversC. NFS storageD. UCS chassisE. Other fabric interconnect

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 118In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?

A. Sending all broadcastsB. Receiving all traffic from upstream switchesC. Receiving broadcast trafficD. Negotiating spanning tree with upstream switchesE. Learning MAC addres?ses from upstream switch?es

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 119Given a Cisco Unified Computing System, which is a valid port type in end-host mode?

A. ServerB. End deviceC. NodeD. HostE. Virtual

Correct Answer: A

Page 49: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

Section: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 120Given the following output:

san-port-channel 12 is up

Hardware is Fibre Channel

Port WWN is 24:0c:00:0d:ec:d3:5c:00

Admin port mode is NP, trunk mode is on

Port mode is NP

Port vsan is 1

Speed is 8 Gbps

Member[1] : fc2/3

Member[2] : fc2/4

What does "Speed is 8 Gbps" indicate?

A. The speed of the slowest interface in the port channelB. The combined speed of all interfaces configured in the port channelC. The combined speed of all interfaces in the port channel that are upD. The speed that can be achieved if all buffers are used

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 121Given a Cisco Unified Computing System, which is a valid port type in end-host mode?

A. TrunkB. PhysicalC. UplinkD. SwitchE. End host

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

Page 50: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 122Which statement is true regarding Backup tasks in Cisco UCS?

A. They are created automatically and stored on the FIB. They are created manually and exported to a remote serverC. They are automatically scheduled to run every 24 hoursD. They are manually scheduled and stored on the FI

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 123What is the use of an "all configuration" backup in Cisco UCS?

A. Can be used to migrate from a 6120 to a 6140 and retain the same service profilesB. Can only be used on the fabric interconnect on which it was createdC. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster informationD. Can be used to match firmware versions between 6120 and 6140 during a migration

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 124What would be the cause for the following fault in UCS Manager?

"ether VIF x / xxx down, reason: ENM source pinning failed"

A. The associated VLANs of a vNIC are not found on an uplink.B. Overlapping VLAN IDs exist on upstream disjoint networks.C. The vNIC was not configured for fabric failover.D. The vNIC is pinned to the wrong fabric.E. Overlapping VSAN IDs exist on upstream SAN switches.F. The vHBA was not configured for failover.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation

QUESTION 125Refer to the exhibit.

Page 51: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

All Ethernet ports are trunked with VLANs 2 thru 10. The Cisco UCS domain is in end-host mode. Host Atransmits a single broadcast frame on VLAN 4.

Which statements are true? (Choose two.)

A. Nexus 5548 A and Nexus 5548 B send a copy of the broadcast frame down all six ports to FabricInterconnect A and Fabric Interconnect B.

B. The deja vu mechanism on the fabric interconnects prevents the fabric interconnects from receiving multiplecopies of the broadcast frame.

C. All four vNICs receive a single copy of the broadcast frame.D. All four vNICs receive multiple copies of the broadcast frame on VLAN 4 but no broadcasts on any other

VLAN.E. The spanning tree process prevents the vNICs from receiving multiple copies of the broadcast frame.F. The Reverse Path Forwarding mechanism prevents the vNICs from receiving multiple copies of the

Page 52: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

broadcast frame.

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 126Refer to the exhibit.

Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in theprovided exhibit.

Which Cisco UCS components will meet the requirement? (Choose three.)

A. Cisco UCS 6148, Cisco UCS 6248UP, or the Cisco UCS 6296UP fabric interconnectsB. Cisco UCS 2104XP Fabric ExtenderC. Cisco UCS 2204XP or 2208XP Fabric ExtendersD. Cisco UCS M81KR Virtual Interface CardE. Cisco UCS Virtual Interface Card 1280F. Cisco UCS Virtual Interface Card 1240 with a port expander

Correct Answer: AEFSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 127Refer to the exhibit.

Page 53: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

You create a service profile within ORG C with two vNICs. Each vNIC is assigned to the MAC pool named"vmware". Which two possible MAC addresses could be assigned to the vNICs? (Choose two.)

A. 00:25:B5:FF:00:01B. 00:25:B5:EE:00:01C. 00:25:B5:DD:00:01D. 00:25:B5:BB:00:01E. 00:25:B5:AA:00:01

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation:

Page 54: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

QUESTION 128Application Control Engine (ACE) can check the health of servers and server farms by configuring healthprobes (which are sometimes referred to as keepalives). A probe can be one of many types. Which are validACE probes? (Choose three.)

A. HTTPB. Java scriptingC. TCL scriptingD. RADIUSE. TACACS

Correct Answer: ACDSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 129Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as theDNS?

A. Client IPB. Proxy IPC. Client and proxy IPD. Neither client nor proxy IP

Correct Answer: ASection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 130In the event of a GSS failure in a GSS cluster, which is true?

A. The current connections are rerouted via the backup GSSB. Secondary GSS cannot be used to configure the GSS clusterC. All remaining GSSs in the cluster continue responding to any new queriesD. All records in the GSS database are flushed and reconstructed again using a new master GSS

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

Page 55: CISCO 350-080 EXAM QUESTIONS & ANSWERS · B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. C. The Nexus 7000 Series Switches can support

http://www.gratisexam.com/