city lights bracelet - beadsmith€¦ · city lights bracelet simple and stunning bracelet with new...

City Lights Bracelet Simple and stunning bracelet with new Matubo Ginko beads

Material (for one bracelet)

Matubo Ginko (approx. 40 pcs)Matubo 8/0 (approx. 2.7 gram)Matubo 11/0 (approx. 3.7 gram)Jump rings, a clasp

Beading needle and thread (Nymo, Fireline...)

Difficulty: For beginners/intermediate

1 | Design and tutorial by Nela Kábelová (www.gianelle.beadforum.cz) Autorem tohoto designu a návodu je Nela Kábelová (www.gianelle.beadforum.cz) www.matubobeads.com

1) String one Ginko (from the outside), one 11/0, one Ginko (from the inside), one11/0, two 8/0s and one 11/0.

2) Slide all the beads to the end of the thread. Leave a tail that is approx.10in (25 cm) long.Then tie a square knot to make a circle. This is what you should get.

3) Go down through the free hole of the nearest Ginko bead.

4) Add one 11/0, one Ginko (from the inside), one 11/0, two 8/0s and one 11/0 and then pass through the samehole of the same Ginko again.

5) This is what you should get.

6) Pass through the new 11/0 and go up through thenearest hole of the new Ginko.

7) And then pass back through the free hole of the same Ginko.

8) Repeat steps 4 – 7 one more time.

9) The thread is exiting from the free hole of the new Ginko (from the inside).

10) Add one 11/0 and go upthrough the free hole of the first Ginko (as shown inthe photo).


11) Add one 11/0, two 8/0s and one 11/0 and go down through the same hole of the same Ginko you startedfrom in the previous step.

12) Go up through the new 11/0 and the nearest hole of the nearest Ginko...

13)... and then through the nearest group of (11/0, 2x8/0, 11/0).

14) Add four 11/0s and pass through the next group of (11/0, 2x8/0, 11/0).

15) Repeat step 14, until you reach the end of the row.

16) And then repeat steps 14 – 15 one more time.

17) Always skip the four 11/0s you added in the previous row, add new four11/0s and pass through thenext group of (11/0, 2x8/0, 11/0).

18) At the end of the row, the thread is exiting from one of the (11/0, 2x8/0, 11/0) groups.

19) Add one 8/0, one 11/0, two 8/0s, one 11/0 and one8/0 – and then pass through the same group of (11/0, 2x8/0, 11/0) again).

20) Pass through the nearest new 8/0...


21)... and through the next (11/0, 2x8/0, 11/0).

22) Add one Ginko (from the outside), one 11/0 and one Ginko (from the inside) and then pass through the same group of (11/0, 2x8/0,11/0) you exited from in theprevious step.

23) Go down through the nearest hole of the nearestnew Ginko...

24)... and through the new 11/0 and then up through the nearest hole of the next new Ginko (as shown in the photo)...

25)... and then pass back through the free hole of the same Ginko.

26) Now finish the new unit (by repeating steps 4 – 18)...

27)...and add the connector for the next one (steps 19 – 21).

28) Keep adding new units, until you reach the desired length of the bracelet (eachunit is approx. 2 cm (0,8 in)long.


29) When you reach the desired length...

30)... and the thread is exiting from the (11/0, 2x8/0, 11/0) group at the end of the bracelet.

31) Add two 11/0s, one 8/0 and two 11/0s and pass through the last group of (11/0, 2x8/0, 11/0) again.

32) Weave through all the new beads and through the(11/0, 2x8/0, 11/0) group one or two more times.

33) When weaving through these beads for the last time, skip the new 8/0.Pull snug.

34) This is what you shouldget.Tie a few half-hitch knots and cut off all the remaining thread.

35) Repeat steps 30 – 34 on the other side of the bracelet, using the other end of the thread. Then, again, tie a few half-hitch knots and cut off all the remaining thread.

36) Use jump rings to attach the clasp to the two8/0s on each end of the bracelet.


Colorways:

Matubo Ginko 03000/29503Matubo 8/0 03000/15695Matubo 11/0 00030/01640

Matubo Ginko 03000/15495, 03000/94412Matubo 8/0 71200/81800Matubo 11/0 03000/14400

Matubo Ginko 03000/29123Matubo 8/0 63130/43400Matubo 11/0 00030/01640


city lights bracelet - beadsmith€¦ · city lights bracelet simple and stunning bracelet with new...

Documents