Data:

feed hopper: • 3.500 x 2.000 mm

feed chute: • 3.000 x 650 mm

feed opening:• 920x250 mm

discharge conveyor: • belt width: 800 mm discharge height: 2.800 mm

drive:• 9V3: electric 9V4: 100 kVA diesel generator

CitySkid 9V3 and 9V4 options:intelligent ultrasonic feed •

controlover-belt magnet• side conveyor• Magic Eye crusher control• WOLFFs leg•

CitySkid 9V3 and 9V4:

„Container-mobile secondary crusher!“

Low annual tonnage of rough and hard qualities makes high demands on mobile crushing technologies. The wearless crushing system of the jaw crusher has proven to be a va-

luable resource in these appli-cations. The CitySkid 9V4 has been specially designed for secondary crushing and has a 920mm wide feed opening with a jaw depth of just 250 mm. The width of the jaw ensures high throughput performance. A graduated grading and good grain shapes are achieved by the conscious restriction of the feed opening to 250 mm. The

grains continue to be crushed along the whole length of the jaw before being discharged through a narrow gap. The Ci-tySkid 9V4 reaches its place of application with a hook lift truck or a low loader.

“I can fi nally fl exibly crush my low quantities of oversize grain by mys-elf. If around 20-40 t/h come out of the screening machine, the ultraso-

nic control is really worth it. I simply place the 9V4 under the conveyor and the intelligent control starts the chute once suf-fi cient material is in the hopper for permanent operation. The mineral mixture can be sold without the need for a secondary machine.”

CitySkid 9V4 in oversize grain application

FACTS

CONCLUSION

transport position on low loadertransport position on 3-axle-hook lift

DATA

Chieftain 2100 feeds the CitySkid 9V4

CitySkid 9V3 and 9V4 working/transport dimensions

working: transport:length: 9.197 mm 7.545 mmwidth: 2.291 mm 9V3: 2.391 mm; 9V4: 2.500 mmheight: 3.604 mm 3-axle-hook lift: 2.689 mm, weight: low loader: 3.104 mmbasic machine: 9V3: 14.800 kg add. magnet: 700 kg9V4: 16.300 kg add. side conveyor: 550 kg

working position

A secondary crusher for the low-wear reduction of fractions up to 250mm.

Finest crushed grain mixtureDepending upon the application and choice of toggle plate up to > 12.5 mm CSS and fi nal product of < 32 - 70 mm.

Intelligent feed controlControl of the fi lling level with ultrasonics and auto-matic start/stop of the feeder upon direct belt feed.

Wheel loader or excavator feedA generously sized hopper with lighting board con-trol for automatic operations without personnel.

(Diesel)electric driveThe 9V3 is prepared for an external electricity supply while the 9V4 model has its own on-board diesel ge-nerator with the possibility to operate with fuel oil.

WOLFFs leg for low loader transportA simple system patented by CityEquip for loading without the use of a crane.

CitySkid 9V3 and 9V4

CitySkid 9V4 in secondary application

September 2008; errors accepted

SCREENING We construct screening machines with speci-fi c features in semi-mobile and staionary form. Washing sta-tions, de-watering plants and

sand screens round off this unique supply range.

CRUSHING Attractive and no complicated technology, using simple linear concepts. Jaw crushing equipment, movable on tracks and skids, are supplied tu

customers in Germany and in the European states.

SIFTING Increasing quality demands and environmental re-strictions require clean separati-on of light and heavy materials. Semi-mobile, track-mobile and

stationary equipment concepts in different sizes conquer these challenges.

SORTING Ferrous and non-fer-rous metals have experienced a rapid development in value. It is almost always worth sorting. Over-belt magnets, the magne-

tic drum and the container-mobile non-fer-rous materials separating equipment pay for themselves in a short amount of time.

Dealer:

www.cityequip.com