civil bpq kollam

7/28/2019 Civil Bpq Kollam

1/54

National Games, Kerala Abstract of Estimates Hockey Stadium, Kollam

NATIONAL GAMES 2010 KERALA

HOCKEY STADIUM , KOLLAMABSTRACT OF ESTIMATES

Sl. No. Description Amount (Rs.)

A WEST STAND

1 Civil & Plumbing Work (West Stand)

2 Substation Building

3 UG Tank and Pump House

4 Signages

5 Landscaping

6 Road and Parking

7 Electrical Internal/ External - West Stand

8 Public Address System


2/54

National Games, Kerala Total Abstract Hockey Stadium, Kollam


HOCKEY STADIUM , KOLLAM

TOTAL ABSRACT FOR KOLLAM HOCKEY STADIUM

Sl. No. Description

1 Civil Works

2 Electrical Works

Total Amount (Rs.)

Amount(Rs.)


3/54

National Games, Kerala Electrical Summary Hockey Stadium, Kollam


HOCKEY STADIUM , KOLLAM

ELECTRICAL ABSTRACT (TOTAL)

Sr. No. Description Amount (Rs.)

1

2

3 Fire Fighting

4 HVAC

5 PA System

Internal & External Electrical Work - West stand

Internal & External Electrical Work - East stand


4/54

National Games, Kerala Summary - Civil Hockey Stadium, Kollam


HOCKEY STADIUM, KOLLAM

CIVIL ABSTRACT

Sl. No. Description Amount (Rs.)

1 Civil & Plumbing Work (West Stand)

2 Civil & Plumbing Work (East Stand)

3 Substation Building

4 UG Tank and Pump House

5 Signages


5/54

National Games, Kerala Civil and Plumbing(West Stand) Hockey Stadium, Kollam

NGS Page 5

NATIONAL GAMES 2010 KERALAHOCKEY STADIUM , KOLLAM - WEST STAND

BILL OF QUANTITIES FOR CIVIL AND PLUMBING WORKS (WEST STAND)

Item Description Unit Rate (Rs) Quantity

CLEARING AND DISMANTLING

1 Sqm 1,603

EARTHWORK

2 Cum 1,525

3 Cum 325

4 Sqm 500

5 Sqm 500

PILE FOUNDATION

6 Rmt 5,321

Sl.No.

Rate (in

words)Rupees

Amount(Rs)

Clearing grass and removing growth of vegetations and small treesof girth up to 30 cm including rooting out and removal of rubbishupto a distance of 150 m outside the periphery of the area clearedetc. complete

Earth work excavation in all classes of soil except hard rock anddepositing on bank including braking clods, watering, ramming and

sectioning spoil bank with all leads, lifts etc. complete as per thedirection of Engineer-In- Charge.

Filling in plinth and floors with approved Excavated materials in15cm to 25cm layers including watering and compacting etccompleteSupply, and spreading hard murum 150mm thk at work site, broughtfrom outside including rolling compacting, watering etc complete.

Compacting the Hard murum up to 200 mm loose with power roller including artifical watering complete

Constructing bored cast in situ R.C.C pile 600mm dia after boringand drilling in all classes of soil to the required depth duly supportedby casing pipe and constructing the borehole with RCC mix M30using 20mm Hard granite broken stone, including hirecharges to theinstallation and operation of all machines required for boring andcompancting, handling and disposal of excavated materials withall leads and lifts excluding cost of reinforcement.


6/54


NGS Page 6

7 Each 7

8 Cum 177

MORTAR AND CONCRETE

9 Cum 108

10 Cum 222

11 Cum 641

12 Cum 139

13 Cum 145

14 Cum 220

Pile load test on single vertical pile in accordance with IS : 2911(part - IV) - Initial and routine load test. (for 600mmdia piles)Chipping and removing top of R.C.C piles to lines and levelscarefully without damaging the remaining portion and removingthe debris upto a distance of 150m.

Cement concrete 1:3:6 ( 1 cement: 3 sand: 6 stone aggregate) using 40mm (nominal size) hard granite broken stone including allleads and lift watering curing etc. complete for ground floor Cement Concrete 1:2:4 ( 1 cement: 2 sand: 4 stone aggregate)using 20mm (nominal size) broken stone including all leads and liftwatering curing etc.complete for Ground Floor

Reinforced Cement Concrete 1:11/2:3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate including all formwork, watering, curing etc completebut excluding reinforcement for pile cap, footing, foundation, drainbottom slab and grade slab etc

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for slabs and landing including all formwork, watering,curing etc complete but excluding reinforcement for slabs fromplinth level to first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for slabs and landing including all formwork, watering,curing etc complete but excluding reinforcement for slabs from firstfloor upto second floor

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for slabs and landing including all formwork, watering,curing etc complete but excluding reinforcement for slabs fromsecond floor upto third floor


7/54


NGS Page 7

15 Cum 14

16 Cum 62

17 Cum 46

18 Cum 68

19 Cum 70

20 Cum 92

21 Cum 82

22 Cum 279

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate ) with 20 mm down size graded hard stoneaggregate for columns and vertical walls including all formwork,watering, curing etc complete but excluding reinforcement uptoplinth level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3

stone aggregate) for columns and vertical walls including allformwork, watering, curing etc complete but excludingreinforcement from plinth upto first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) for columns including all formwork, watering,curing etc complete but excluding reinforcement from first floorupto second floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) for columns and vertical walls including allformwork, watering, curing etc complete but excludingreinforcement from second floor upto third floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, drain vertical walls etc.including all formwork, watering, curing etc complete but excludingreinforcement upto plinth level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, staircases etc. includingall formwork, watering, curing etc complete but excludingreinforcement from plinth upto first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, staircases etc. includingall formwork, watering, curing etc complete but excludingreinforcement from first floor level to second floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, staircases etc. includingall formwork, watering, curing etc complete but excludingreinforcement second floor level to third floor level


8/54


NGS Page 8

23 Qtl 4,264

24 Cum 30

BRICKWORK

25 Cum 80

26 Cum 1,066

27 Cum 151

28 Cum 153

29 Sqm 481

Providing and fixing in position HYSD bar reinforcement Fe 415 ofvarious diameters for footings, foundations, slabs, beams andcolumns, canopies, staircase, newels, chajjas,lintels,copings, etc. asper detailed designs, drawings and schedules including cutting,bending, hooking the bars, binding with binding wires as requiredetc. complete.

Providing and fixing in position precast reinforced concrete cover(grade M-25) with openings over Gutter 50-75 mm thick heavy typewith required reinforcement, fixing etc. complete all as per designand drawing and as directed (M-20)

Brick work in cement mortar 1:6 ( 1 cement: 6 sand) using countryburnt bricks of size 22.9x11.2x7 cm good quality for super structureincluding all hire and labour charges for all scaffolding chargeswatering curing all leads and lift etc. complete upto plinth level

Brick work in cement mortar 1:6 ( 1 cement: 6 sand) using countryburnt bricks of size 22.9x11.2x7 cm good quality for super structureincluding all hire and labour charges for all scaffolding chargeswatering curing all leads and lift etc. complete for Ground floor

Brick work in cement mortar 1:6 ( 1 cement: 6 sand) using countryburnt bricks of size 22.9x11.2x7 cm good quality for super structureincluding all hire and labour charges for all scaffolding chargeswatering curing all leads and lift etc. complete for First floor

Brick work in cement mortar 1:6 ( 1 cement: 6 sand) using countryburnt bricks of size 22.9x11.2x7 cm good quality for super structureincluding all hire and labour charges for all scaffolding chargeswatering curing all leads and lift etc. complete for Second floor

Providing second class Burnt brick masonry with conventional/I.S.type bricks in cement mortar 1:4 ( 1 cement: 4 sand) in Half Brick thick wall including mild steel longitudinal reinforcement of 2 bars of6mm diameter at every third course, properly bent and bounded atends scaffolding, racking out joints and watering etc. complete.


9/54


NGS Page 9

STONE MASONRY

30 Cum 10

31 Cum 10

FLOORING

32 Sqm 733

33 Sqm 1,600

34 Sqm 944

35 Sqm 85

36 Sqm 87

37 Sqm 5

Random rubble in cement mortar 1:6 ( 1 cement: 6 sand) for foundation and basement including watering curing etc complete

Providing dry / trap / granite / quartzite / gneiss Rubble stone soling15cm to 20cm, thick including hand packing and compactingcomplete.

Flooring with best quality antiskid coloured ceramic tile s of goodquality and size 30cm x 30 cm in cement mortar 1:3, 12 mm thick and pointing with coloured cement to mach the tile etc.complete.

Flooring with best Vitrified Tiles of good quality and size 60cm x60cm in cement mortar 1:3, 12 mm thick and pointing with colouredcement to match the tile etc.complete.

Providing and laying polished Kotah stone flooring 25mm to 30mmthick with standard size in plain/diamond pattern on bed of 1:3cement mortar including cement float, filling joints with neatcement slurry,curing,polishing and cleaning complete.

Providing and laying polished granite stone slabs (one piece) 25mmto 30mm thick for Treads and risers of staircase as per detaileddrawings, design and as directed by the architect includingrounded nosing for the the treads on a bed of 1:3 CM includingcement float, filling joints with neat cement slurry, curing, polishingand cleaning complete.

Providing and fixing machine cut mirror polished granite of 18 to20mm thick best quality to flooring of approved colour fixing incement mortar 1:3 including cleaning, curing etc. complete.

Providing and fixing Pantry platform made out of 18 to 20mm thick approved colour granite over cuddapah stone 600mm wide withtwin cuddapah vertical below slab including cement mortar 1:4100mm wide fascia of Granite with making cutout toaccommodate sink etc. with rounding edges polishing both sidepolished cuddapah shelf verticals. etc. complete.


10/54


NGS Page 10

38 Sqm 29

39 Sqm 53

40 Sqm 50

41 Sqm 1,579

PLASTERING AND POINTING

42 Sqm 500

43 Sqm 2,144

44 Sqm 4,032

Providing and fixing wash basin counter, 600mm wide, sandwitchtype with 18 to 20mm thick approved colour and quality Graniteslab on black cuddapah in CM 1:4 including necessary Cuddapahsupport making necessary holes in the counter for wash basin andpillar cock, vertical supports, fascias of granite 100mm widemoulding with edge polishing etc. complete as directed by

Engineer in chargeProviding 20/25 mm thick partitions of Both side polished black /colour granite stone of approved shape, quality and colour for Urinals including cutting holes of required sizes in appropriate placesto receive pipes rounding edges etc. fixing in the cement mortar 1:3, curing and cleaning complete. (Size 600 x 1550)

Providing and fixing 60mm or nearest thick interlocking concretepaver block of plane finish of any size and shape havingcompressive strength at 300 kg / Sq.cm (M-30 grade) in any colour and manufacture on fully automatic machine (plant) fixing on75mm thick sand bedding laid in proper position levelling, filling

joints with stone dust cleaning including loading unloadingtransporting etc. complete. as directed Engineer in charge.

Providing and laying cement concrete flooring 50mm thick with1:2:4 cement concrete laid to proper level and slope in alternatebays, including compacting, glass strips at joints marking lines togive appearance of tiles of 30cmx 30cm or other size laiddiagonally / square etc. finishing smooth with extra cement in anycolour as directed and curing etc. complete.

Providing and applying White Acrylic Wall Care Putty S.F/ orequivalent 3mm thk in two layers, water resistant white cement baseputty to concrete/previously plaster surface in all position includingpreparing the surface, filling the undulations, scaffolding, cleaningetc. complete. as per manufacturers specifications. As directed byEngineer in charge.

Plastering with cement mortar 1:3,9mm thick one coat floated hardand troweled smooth etc. complete.Plastering with cement mortar 1:4,12mm thick one coat floatedhard and troweled smooth etc. complete.


11/54


NGS Page 11

45 Sqm 3,053

46 Sqm 100

47 Sqm 1,905

48 Sqm 1,385

PAINTING WORKS

49 Sqm 2,144

50 Sqm 4,032

51 Sqm 200

52 Sqm 4,032

53 Sqm 3,053

WATER PROOFING

54 Sqm 320

Providing external plastering in cement mortar using approvedscreened sand, in all positions including base coat of 15mm thick inC.M. 1:4 using waterproofing compound at 1kg per cement bagcuring the same for not less than 2 days and keeping the surface ofthe base coat rough to receive the second coat 6 to 8mm thick inC.M. 1:4 finishing the surface by taking out grains/tie rolling andcuring for fourteen days scaffolding etc.complete.

Add to cement plastering items for finishing with neat cementflushing coatDadoing walls with best quality glazed coloured tiles of fixedcement mortar 1:3, 12mm thick and pointing with coloured cementto match the tile etc. complete.

Providing and fixing Chicken mesh jali (22 gauge) or nearestavailableat the junction of 2 different surfaces of different materialcomponent at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts

etc.complete.

Distempering with oil bound distemper on new work two coatincluding smoothening with sand paper etc.complete.Painting with priming coat on wall surface using with water basedcement primer after sand papering and cleaning the surfaceetc.complete.Painting with Synthetic enamel paint Two coats after sand paperingand cleaning the surface etc.complete

Painting with Ready mixed plastic emulsion paint Two coats after sand papering and cleaning the surface etc.completePainting with Exterior Emulsion Paint two coats on walls prepared bycleaning and sand papering etc complete

Providing water proof bedding for Flooring of Bath and WC 25 mmthick in C.M 1:3 including using 1 kg of water proof compound per bag of cement including leveling curing etc. complete.


12/54


NGS Page 12

55 Sqm 582

56 Cum 101

STEEL WORK

57 Qtl 6

58 Qtl 5

59 Qtl 29

60 Sqm 779

SANITARY AND WATER SUPPLY

Providing 20 mm thick cement finish plaster in a two coats incement mortar 1:4 to brick surface externally in all positionsincluding approved water proofing compound as per manufacturer specification scaffolding and curing complete. ( with 10 years

guarantee.)

Providing and filling Brick Bat Coba in CM 1:3 with approved water

proofing compound specialised material as per manufacturersspecifications covering 10 years gaurantee onRs.100 /- stamppaper including all leads , lifts etc. complete.

Providing M.S. grills for windows or compound gates including alllabour and hire charges for fabricating and cost of materials andapplying a coat of iron primer etc.complete.

Steel work welded in built up sections and trusses with MS angles,tees etc . including all labour and hire charges for fabricating and

cost of materials and applying a coat of iron primer etc.complete.

Steel work welded in built up sections, railing and trusses with MStubes including all labour and hire charges for fabricating and costof materials and applying a coat of iron primer etc.complete.

Providing and erecting Chain link fencing 1:6 M. height with G.I.chain link of size 50 x 50mm x 10 guage thick and fixed 75mmabove ground level vertical M.S. angle of 75 x 75 x 6mm sizeembedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670mm. At1.75m c/c with iron bar 16mm dia as hold fast including welding link

with angle frame at 30cm c/c nuts and bolts and horizontal andvertical M.S. flat 35 x 5mm and 25 x 5mm and 25 x 5mm horizontalincluding cross support of 40 x 40 x 6mm angles both side at everycomer or bends embedded in concrete blocks of 1:4:8 of size 450 x450 x 670mm including 3 coats of oil painting for angle / flats etc.complete. Spec. As directed by Engineer in charge.


13/54


NGS Page 13

61 Each 10

62 Each 30

63 Each 9

64 Each 62

65 Each 10

66 Each 29

67 Each 3

S/F. best quality Orrissa pattern W.C. Pan white coloured 530x400mm or nearest size with P or S trap with P.V.C high level flushing cisternwith 1 No. cp. Angle valve,1 No. P.V.C.. connection includingsquatting plate form of size 900x700 mm and plastered over withcement mortar 1:3,with neat flushing coat etc.complete includingall cost of materials, conveyance etc

Providing and fixing European type white glazed earthenware wallhung W.C. Pan with PVC sheet cover C.P. bracket with chromiumplated brass hinges and rubber buffer including C.I. Soil and ventpipe upto the out side face of the wall10 litre PVC high level tank flushing cistern, 32mm dia. PVC flush pipe C.P. angle stop cock withfittings and clamps 20mm dia. G.I. overflow pipe with mosquitoproof grating making good walls and floors complete. as directedby Engineer-in charge.

S/F. best quality European type white coloured W.C. pan with P or S trap and black duroplastic seat and cover with P.V.C low level

flushing cistern with 1 No. C.P.. Angle valve,1 No. P.V.C. connection,etc.complete including all cost of materials, conveyanceetc.complete.

Providing and fixing a white glazed earthenware lipped flat back type urinals large size with C.P. Brass inlet pipe, C.P. spreader, inbuiltASO make automatic sensor operated flush valve C.P. Stop cock,C.P. waste coupling, PVC waste pipe making good the damagedsurfaces etc. complete.

Supplying and fixing white glazed earthen ware Wash hand basin ofsize 550x400mm or nearest available higher size with 1 No:15 mmP.V.C.. connection ,1 No:15 mm C.P.. Angle valve, 1 No: 32 mm C.P..waste, 1 pair C.I. bracket or anchor bolt,1No: 32 mm P.V.C. waste ,1No CP pillar tap etc.complete.

Providing and fixing Coloured vitreous first quality OVAL SHAPE washhand basin 55cm x 40cm size including C.P. pillar cock, 32mm diaC.P. bottle trap, C.P. stop cock, C.P. Waste coupling, C.P. brackets,rubber plugs and brass chain, and necessary pipe connectionsincluding PVC waste pipe 32mm dia. etc complete.

Providing and fixing stainless steel sink 600x450mm with Cpwaste,CP pillar cock, stop cock etc complete


14/54


NGS Page 14

68 Each 123

69 Each 18

70 Each 49

71 Each 11

72 No. 20

72 No. 20

Supplying and fixing Nahni trap with cement concrete using 20 mmbroken stone including cutting open, boring through masonry walls,RCC floors etc. and making good to the damages

Supplying and fixing 100 mm gully trap for the waste line with brick jelly concrete in lime mortar , necessary brick masonry around

plastering CM .1:3,12 mm thick with neat flushing with coatetc.complete including providing 2Nos heavy CI. Gratings 150x150mm and 225x225 mm for the side, painted with black Japan painttwo inside and out coats and necessary earth work excavationetc.complete.

Constructing silt pit 20 x20 cm up to 60cm depth inside dimensionwith half brick thick walls in lime mortar 1:2 for foundation 15 cmthick , plastering with cement mortar 1:3,12 mm thick with neatflushing coat etc.complete providing 2Nos heavy CI gratings150x150 mm and 225x225 mm for the inside and out side, paintedwith black Japan paint two coats and necessary earth work

excavation etc.complete.Providing and constructing Brick Masonry Inspection Chamber 60cmx 45cm x 60cm including 1:4:8 100mm thick, cement concretefoundation 1:2:4 cement concrete haunch half round G.S.W. pipes,230mm thick brick masonry, plastering from inside and outside RCCframe with cover etc. complete.Providing and constructing Brick masonary Inspection chamber90cm x 45cm x 60cm including 1:4:8 100mm thick, cementconcrete foundation 1:2:4 cement concrete haunch half roundG.S.W. pipes, 230mm thick brick masonary, plastering from insideand outside and with RCC cover and frame etc. complete.

Providing and constructing 230mm thick Brick masonary Rainwaterchamber 60cm x 60cm x 60cm including 1:4:8 100mm thick cementconcrete foundation and 20mm thick cement plaster internallyincluding excavation refilling, RCC grating etc. complete.


15/54


NGS Page 15

73 Each 3

74 Each 39

75 Each 24

76 Each 39

77 Each 49

78 Each 24

79 Each 9

80 Each 49

81 Each 49

82 Each 40

83 Each 20

84 Each 20

85 Each 87

86 Each 20

87 Each 15

88 Each 49

Providing & constructing Circular Manhole 45 cm dia. at top 90 cmat bottom upto 1.80 metre depth including 150 dia. sewer trap,excavation, laying 1:4:8 cement concrete bedding, 230mm thick /345mm thick burnt brick masonry with 1:3 cement mortar. Plaster 25mm thick inside and outside cast iron heavy type cover withframe 125 kg in weight, C.I. steps refilling etc. complete.

Providing and fixing 450mm x 600mm size Superior type Belgiummirror with 6mm thick glass with C.P. Brass screws & 6mm thk plywood backing etc. complete.Supplying and fixing best quality 600x16 mm or nearest size C.P..brass towel rail with bracket good quality etc.completeProviding and fixing C.P. Towel RingSupplying and fixing 150mm or nearest size CP toilet paper holder ofstandard size etc. complete.Supplying and fixing in position concealed type ceramic soap traywith all accessoriesProviding and fixing 15 mm or nearest size brass screw down bib tap (Superior quality) etc.completeProviding and fixing 15 mm or nearest size CP long body tap (Superior quality) etc.complete.Providing and fixing 15 mm or nearest size CP short body tap (Superior quality) etc.complete.Providing and fixing 15mm dia CP brass two way bib tap includingnecessary socket with flange etc completeProviding and fixing 15 mm or nearest size CP angle valve (Superior quality) etc.complete.

Providing and fixing 15 mm or nearest size CP Pillar cock (Superior quality) etc.complete.Providing and fixing 15 mm or nearest size brass stop cock (Superior quality) etc.complete.Providing and fixing 20 mm or nearest size full way brass valve withwheel (Superior quality) etc complete.Providing and fixing 25 mm or nearest size full way brass valve withwheel (Superior quality) etc complete.Providing and fixing 32mm dia CP brass flush valve


16/54


NGS Page 16

89 Each 10

90 Each 3

91 Each 2

92 Each 49

93 Each 49

94 Each 24

95 Each 120

96 Each 200

97 Each 10

98 Rmt 250

99 Rmt 110

100 Rmt 100

101 Rmt 250

Providing and fixing 40 mm or nearest size full way brass valve withwheel (Superior quality) etc complete.Providing and fixing 15 mm or nearest size ball valve ( Superior quality) etc.complete.Providing and fixing 20 mm or nearest size ball valve ( Superior quality) etc.complete.

Providing and fixing CP coat hook Providing and fixing 15mm dia CP brass health faucet includingnecessary fittings etc complete

Providing and fixing Chromium plated Hot and cold water mixer unitheavy duty with C.P. shower with telephonic arrangement includingnecessary supply pipes 15mm dia and fittings like socket union, nutsbends valves reducers, including necessary drilling holes in wallsslabs etc. and remaking good the demolished portion to restore thesame in original condition neatly and cleaning the site after completion of work, testing etc. complete.

Providing and fixing 15 mm or nearest size PVC connection pipeetc.complete.Providing and fixing 32 mm or nearest size PVC waste pip e withleading nut etc.completeProviding and fixing C.P. adjustable type shower ros e with 15 mm or 20mm inlet etc.complete.Supplying and laying 20 mm dia PVC pipe (12 kg/cm2) includingcost of all fittings such as tees, elbows, couplings, clamps, screwscost and conveyance of all materials etc.complete.

Supplying and laying 32 mm dia PVC pipe(12 kg/cm2) including

cost of all fittings such as tees, elbows, couplings, clamps, screwscost and conveyance of all materials etc.complete.

Supplying and laying 40 mm dia PVC pipe(10 kg/cm2) includingcost of all fittings such as tees, elbows, clamps, screws cost andconveyance of all materials etc.complete.

Supplying and laying 20 mm dia PVC pipe(12 kg/cm2) includingcost of all fittings such as tees, elbows, checknut, clamps, screwscost and conveyance of all materials trenching to a minimumdepth of 0.50 m and re-filling etc.complete. (External work)


17/54


NGS Page 17

102 Rmt 110

103 Rmt 100

104 Rmt 100

105 Rmt 100

106 Rmt 258

107 Rmt 100

108 Rmt 150

109 Supplying and fixing 110 mm dia PVC Door Elbow etc.complete Each 20110 Supplying and fixing 110 mm dia PVC Plain Elbow etc.complete. Each 20111 Supplying and fixing 110 mm dia PVC Plain Tee etc.complete. Each 20112 Supplying and fixing 110 mm dia PVC Door Tee etc.complete. Each 20113 Supplying and fixing 110 mm dia PVC Offset etc.complete. Each 20

114 Supplying and fixing 110 mm dia PVC Vent cowl etc.complete. Each 20115 Supplying and fixing 110 mm dia PVC Bend etc.complete. Each 20116 Supplying and fixing 110 mm dia PVC Door Bend etc.complete. Each 20117 Supplying and fixing 63 mm dia PVC Door Elbow etc.complete. Each 20118 Supplying and fixing 63 mm dia PVC Plain Elbow etc.complete. Each 20119 Supplying and fixing 63 mm dia PVC Plain Tee etc.complete. Each 20120 Supplying and fixing 63 mm dia PVC Door Tee etc.complete. Each 20121 Supplying and fixing 63 mm dia PVC Offset etc.complete. Each 20122 Supplying and fixing 63 mm dia PVC Bend etc.complete. Each 20


Supplying and laying 32 mm dia PVC pipe(12 kg/cm2) includingcost of all fittings such as tees, elbows, checknut, clamps, screws

cost and conveyance of all materials trenching to a minimumdepth of 0.50 m and re-filling etc.complete. (External work)



Supplying and laying 63 mm dia PVC pipe (4 kg/cm2) etc.completesewerage lines.Supplying and laying 63 mm dia PVC pipe (6 kg/cm2)etc.complete.Supplying and laying 110 mm dia PVC pipe (4 kg/cm2)etc.complete sewerage lines.


18/54


NGS Page 18

MISCELLANEOUS ITEMS

123 Sqm 1,392

124 Sqm 182

125 Rmt 13

146 Sqm 13150 x 44.45 x 2.5mm box section @ 2.46 kg/m for bottom rail shutter

47 x 44.45 x 2.5mm box section @ 1.22 kg/m for shutter top rail47 x 44.45 x 2.5mm box section @ 1.25 kg/m for shutter styles.5.5mm thick plain glass for glazing

Providing and fixing False ceiling of 15 to 20mm thick decorativeboards of fibrous plaster of Paris including scaffolding if necessary,including all architectural features like mouldings, cornices, covers,domes, cups as per detailed drawings and with three coats of spraypainting to boards including heavy duty frame work of G.I. runners

and suspenders including cost, conveyance of all materials andlabour charges etc. complete.

Supplying and fixing P.V.C hollow laminated bath room door ofgood quality with door shutters consisting of door frame, shutter frame, middle rail and infill panel made from PVC conforming to IS10151-1982. Infill panel shall have a thickness of 20mm with wallthickness 1.50mm, shutter frame of size 59mmx24mm with polymericL type corners. Door frame dimensions to be 48mmx40mm withthickness 1.5mm and fixed to wall with concealed cleat or screw.The item include cost of butt hinges, 2 nos door handles, 2 nos PVCaldrops etc

Supplying and fabricating and fixing Stainless Steel hand rails usingthe top rail with 40 mm dia SS pipe, end vertical with 50 mm dia SSpipe, inside verticals with 32 mm dia SS pipe at 1.50 m C/C andinside horizontals with 15 mm dia SS pipe of 4 rows including allwelding charges, muffing charges, cost and conveyance of allmaterials etc.complete .

Fabrication, supply and fixing in position fully glazed door with singleleaf shutters for opening on floor springs using extruded powdercoated aluminium sections (Indal / Gindal) as per drawings and ISImark fixtures with suitable screws, bolts, nuts wooden plugs at theconnections, etc. withthe following ections and approved make.

101.6 x 44.45 x 2.5mm box section @ 1.97 kg/m and 1.86 kg m for frame101.6 x 44.45 x 2.5mm box section @ 2.05 kg/m for middle rail ofshutter


19/54


NGS Page 19

glazing clips of 1.27 mm thick @ 0.176 kg/m for fixing glass.U shape rubber beading for fixing glass

147 Sqm 93

148 Sqm 179

Door fittings-All door fittings are of Godrej MAKE 1.Lock- EuroprofileNarrow style Mortise Dead Lock with EXS Pin Cylinder 60mm 1CK inmaster key arrangement (9364) -1no . 2. Floor spring-B840 series(3800) -1 no. 3. Alluminium door handle - Pull Handle - 2 Nos. 4.

Heavy duty tower bolt - 1 Nos.

Providing and fixing in position anodised (20 mircon) (As per IS1868/1982) Aluminium powder coated sliding window of twotracks / three tracks with SS 304 20X30 micron mosquito proof net (Indal / Gindal) as per detailed drawing and as directed byEngineer in charge with all necessary alluminium sections fixturesand fastenings such as roller bearing in nylon casing and self lockingconcealed lock (Star/ Standerd make) fitted in vertical section ofshutter including 5mm thick plain glass with all required screws nuts

& sealing the joints between wall & window with silicon sealent etc.complete. (only weight of alluminium section shall be consideredfor payment) NOTE: While arriving at the rate of item weight @ 6.9kg/ sqm. is to be considered.SECTION DETAILS:- 1) 2TRACK(Top)SECTION NO.20839 Weight-0.784 Kg/per m. 2) 2TRACK(Bottam)SECTION NO.20830 Weight-0.909 Kg/per m. 3) 3TRACK(Top)SECTION No.20831 Weight-1.060 Kg/per m 4) 3TRACK(Bottam)SECTION No.20832 Weight-1.248 Kg/per m 5) Top /Bottam-20736 , Weight- 0.547 Kg/per m 6)Handle- 20738, Weight- 0.547Kg/per m 7) Interlock- 20737 Weight-0.607 Kg/per m

Providing and fixing in position power caoted Alluminium partlyopen able and partly fixed window / Ventilators ( 20 micron) (Indal /Gindal) of any size as per detailed drawing and as directed byEngineer-in-charge with all necessary aluminium sections includingnecessary fixtures and fastening such as aluminium latch, aluminiumstay, tower bolts, PVC gasket andrubber lining, aluminium screws, hinges etc. with 5mm thick clear float glass etc. complete. NOTE: While arriving at the rate of itemweight @ 6.9 kg/Sqm is considered.


20/54


NGS Page 20

148

Sqm 26

149

Sqm 13

Providing and fixing solid core flush door in single leaf 32mm thick decorative types, of exterior grade as per detailed drawings,including superior indian teak wood door frame 75mm x 125mmapparoved face laminates 1mm thick on both face with glazingand venetions in the position shown on the drawing or as directedall necessary beads, mouldings and lipping, wrought iron hold fasts,with finishing with synthetic enamel paint of approved makeh etc.complete. BDT-34 Page. N.499 with tadi patti-2nos, door handles- 2nos. heavy duty SS 304 hinges -4nos, tower bolt -1nos. All hard wareshould be of approved quality

Providing and fixing solid core flush door in Double leaf leaves32mm thick , decorative type of exterior grade as per detaileddrawings including superior indian teak wood door frame 75mm x125mm approved face laminates 1mm thick on both face withglazing and venetion in the position shown on the drawings or asdirected all necessary beads, moulding and lipping finishing withsynthetic enamel paint of approved make etc. complete. (All doorfittings are of GODREJ MAKE) 1. Hinges- SS 304 Ball bearings- 3" x 4"

x 3mm - 8 Nos. 2. Europrofile Multibolt Mortise Lock in SS Finish (3571)with SS 304 Tube Lever Handle D type with Square Plate and ThumbTurn (3715) and EXS Pin Cylinder 60mm 1CK in master keyarrangement. 3. Door closers - Delta series door closer D74 (85PS4-silver) code (9415) with 90 o hold open arm :- 2no 4. Rubber buffers -1Nos. 5. Brass oxidesed door stoper - 2 Nos. 6. Heavy duty tower bolt(SS 304 300mmlong) :- 2 no.


21/54


NGS Page 21

149 Sqm 65

150 Sqm 5

151 Sqm 49

152 Same as above but for perforated/ grill type Sqm 10

Providing and fixing solid core flush door in single leaf 32mm thick decorative types, of exterior grade as per detailed drawings,including superior indian teak wood door frame 75mm x 125mmapparoved face laminates 1mm thick on both face with glazingand venetions in the position shown on the drawing or as directedall necessary beads, mouldings and lipping, wrought iron hold fasts,

with finishing with synthetic enamel paint of approved makeh etc.complete. BDT-34 Page. N.499 (All door fittings are of GODREJMAKE) 1. Hinges- SS 304 Ball bearings- 3" x 4" x 3mm - 8 Nos. 2.Europrofile Multibolt Mortise Lock in SS Finish (3571) with SS 304 TubeLever Handle D type with Square Plate and Thumb Turn (3715) andEXS Pin Cylinder 60mm 1CK in master key arrangement. . 3. Door closers - Delta series door closer D74 (85PS4-silver) code (9415) with90o hold open arm :- 1no 4. Rubber buffers -1 Nos. 5. Brass oxideseddoor stoper - 1 Nos. 6. Heavy duty tower bolt(SS 304 300mm long) :-1no.

Extra for providing and fixing 3mm thick veneers on both sides of

flush doors shutter instead of 1mm thick laminate using Fevicol,Melamine polishing etc complete

Providing and fixing Rolling shutter fabricated from steel laths ofminimum thickness 0.9mm with lock plate of 3.15 mm thicknessreinforced with 35 x35 x 5mm angle section fitted with sliding boltsand handles for both sides, deep M.S. channels section of depthand thickness not less than 65mm and 3.15mm respectively withhold fast arrangement, M.S. bracket plate 300 x 300 x 3.15mmminimum size and shape with square bar suspension shaft ofminimum 32mm diameter, hood cover of M.S. sheet not less than0.9mm thickness and of any size at top and safety devices includingmechanical gear operation arrangement consisting of worm gear wheels and worms of height grade cost iron or mild steel and onecoat of red lead primer etc. complete.


22/54


NGS Page 22

153 Sqm 10

155 Sqm 1,603

156 Sqm 1,603

157a) 150mm dia Rmt 120b) 225mm dia Rmt 10c) 300mm dia Rmt 50

158 Rmt 100

Providing and fixing in position powder coated anodised extrudedAluminium partitions (Indal / Gindal) with both sides laminatedpanels having frame made out of aluminium extruded tubular section of size 40mm x 65mm with 12mm thick three layered flatpressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to I.S. 12823-

1990, laminated on both sides, fixed with aluminium glazing clips ofsize 12 x 12mm as per approved drawing etc. complete. (Sample tobe got approved from Ex.Engineer before use) Spec. As directed byEngineer in charge.

Providing and applying preconstructional Antitermite treatment for foundation and plinth as per IS 6313 Part - II with covering 10 yearsguarantee on 100 rupees stamp paper submitted to Client/Architect in approved proforma etc. complete. Antitermitetreatment to be carried out from foundation to plinth as per stagesgiven in the IS 6313 Part II. However Measurement for payment willbe as per plinth area only.

Providing and laying in position 300 micron low density polyethylenesheets (LDPE sheets) of specified thickness of approved make andquality below grade slab, raft slab, embankments paving etc. withnecessary pressure adhesive tapes or with serrated joints made byan electric iron rod complete as directed and instructed byEngineer / owner. (minimum lap of sheets shall be 50 to 75mmunless noted otherwise.)

Providing and laying concrete pipes of I.S. NP2 class of requireddiameter in proper line, level and slope including necessary collars,excavation laying, fixing collars in cement mortar, 1:1 and refilling

the trench etc. complete.

Providing and laying 150mm dia RCC perforated pipe includingexcavation, back filling etc. complete.


23/54


NGS Page 23

160

a) 150mm dia Rmt 152b) 110mm dia Rmt 75

161 Each 1

162a) 1000 ltr Ltr 3,000a) 5000 ltr Ltr 10,000

163 Sqm 249

163

Rmt 100

a) Centrifugal monoblock pump set.b) Foundationc) suction & delivery pipes with specials.

Supplying and fixing UPVC Rainwater pipe of required diameter conforming to I.S.-13592, & I.S.- 4985 to withstand continuous internalhydraulic pressure of 4 kg / Sq.cm. including necessary fixtures andfittings, such as bends, tees, single junctions, double junctions and

joining with rubber rings and lubricants, on wall by means of cl ips or in ground including necessary fitting etc. complete.

Providing and fixing 40mm water meter bearing ISI mark with nonreturn valve including strainer, sockets, union nut and constructionof brick masonry chamber of size 600 x 600mm x 600mm with castiron frame cover with locking arrangement including cost andconveyance of all material to work site, all labour charges etc.complete. (weight of C.I. cover with frame - 125 kg)

Providing and fixing PVC overhead water tank including over flowpipe, wash out pipe etc. complete.

Providing plinth protection 1000 mm wide with 230mm thick solingand 100mm thick PCC M 15 around building including excavationetc. complete.Providing & making storm water drain of 450mm X600mm clear sizewith required slope as per design and drawing, including 230mm thk side walls in BBM , required excavation, 230mm thk soling , 100mmthk PCC (1:3:6), 450mm NP2 class RCC half round pipe at bottom,cement finish plaster from inside, 100mm thk RCC coping at top .making nothch at top for perforated cover, 75mm thk precast RCCperforated cover etc. complete & as directed by engineer incharge.

Supply, installation, testing &commissioning centrifugal monoblock pumpsets with allied equipments as under (special specification)


24/54


NGS Page 24

164

d) Sluice valve, reflux valve, foot valve

Each 2

e) Starter

h) Earthing.i) Pressure gauge

j) Tools and spares as specified by the engineer in charge.k) 5 Hp & head 30M, discharge 8.5lps

Total for Civil and Plumbing works (Rs.)

f) L.T panel board incorporating ammeter, Voltmeter, switches,starter,earth leakage circuit braler, single phasing preventor, water level guard, capacitor et. Including supply and fixing of panel boxof sufficient size to house pump controller also.

g) Cable of appropriate dia as specified by the engineer in chargeand of required length.


25/54

National Games, Kerala Civil and Plumbing(East Stand) Hockey Stadium, Kollam

NGS Page 25

NATIONAL GAMES 2010 KERALAHOCKEY STADIUM , KOLLAM - EAST STAND

BILL OF QUANTITIES FOR CIVIL AND PLUMBING WORKS (EAST STAND)

Item Description Unit Rate (Rs) Quantity


1 Sqm 358

EARTHWORK

2 Cum 343

3 Cum 68

4 Cum 109

MORTAR AND CONCRETE

5 Cum 17

6 Cum 46

7 Cum 62

Sl.

No.

Rate (inwords)Rupees

Amount

(Rs)

Clearing grass and removing growth of vegetations and small treesof girth up to 30 cm including rooting out and removal of rubbishupto a distance of 150 m outside the periphery of the area clearedetc. complete

Earth work excavation in all classes of soil except hard rock anddepositing on bank including braking clods, watering, ramming andsectioning spoil bank with all leads, lifts etc. complete as per thedirection of Engineer-In- Charge.

Filling in plinth and floors with approved Excavated materials in15cm to 25cm layers including watering and compacting etccomplete

Providing dry / trap / granite / quartzite / gneiss Rubble stone soling15cm to 20cm, thick including hand packing and compactingcomplete.

Cement concrete 1:3:6 ( 1 cement: 3 sand: 6 stone aggregate)

using 40mm (nominal size) hard granite broken stone including allleads and lift watering curing etc. complete for ground floor

Cement Concrete 1:2:4 ( 1 cement: 2 sand: 4 stone aggregate)using 20mm (nominal size) broken stone including all leads and liftwatering curing etc.complete for Ground Floor

Reinforced Cement Concrete 1:11/2:3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate including all formwork, watering, curing etc completebut excluding reinforcement for footing, foundation, drain bottomslab and grade slab etc


26/54


NGS Page 26

8 Cum 47

9 Cum 7

10 Cum 20

11 Cum 29

12 Cum 26

13 Qtl 298

BRICKWORK

14 Cum 20

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for slabs and landing including all formwork, watering,curing etc complete but excluding reinforcement for slabs fromplinth level to first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3

stone aggregate ) with 20 mm down size graded hard stoneaggregate for columns including all formwork, watering, curing etccomplete but excluding reinforcement upto plinth level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) for columns and vertical walls including allformwork, watering, curing etc complete but excludingreinforcement from plinth upto first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, drain vertical walls etc.including all formwork, watering, curing etc complete but excluding

reinforcement upto plinth levelReinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, staircases etc. includingall formwork, watering, curing etc complete but excludingreinforcement from plinth upto first floor level

Providing and fixing in position HYSD bar reinforcement Fe 415 ofvarious diameters for footings, foundations, slabs, beams andcolumns, canopies, staircase, newels, chajjas,lintels,copings, etc. asper detailed designs, drawings and schedules including cutting,bending, hooking the bars, binding with binding wires as required

etc. complete.



27/54


NGS Page 27

15 Cum 154

16 Sqm 99

FLOORING

17 Sqm 154

18 Sqm 102

19 Sqm 85

20 Sqm 29

21 Sqm 5


Providing second class Burnt brick masonry with conventional/I.S.type bricks in cement mortar 1:4 ( 1 cement: 4 sand) in Half Brick thick wall including mild steel longitudinal reinforcement of 2 bars of6mm diameter at every third course, properly bent and bounded atends scaffolding, racking out joints and watering etc. complete.

Flooring with best quality antiskid coloured ceramic tiles of goodquality and size 30cm x 30 cm in cement mortar 1:3, 12 mm thick and pointing with coloured cement to mach the tile etc.complete.

Flooring with best Vitrified Tiles of good quality and size 60cm x60cm in cement mortar 1:3, 12 mm thick and pointing with colouredcement to match the tile etc.complete.

Providing and laying polished Kotah stone flooring 25mm to 30mmthick with standard size in plain/diamond pattern on bed of 1:3cement mortar including cement float, filling joints with neatcement slurry,curing,polishing and cleaning complete.

Providing and laying polished granite stone slabs (one piece) 25mmto 30mm thick for Treads and risers of staircase as per detaileddrawings, design and as directed by the architect includingrounded nosing for the the treads on a bed of 1:3 CM includingcement float, filling joints with neat cement slurry, curing, polishingand cleaning complete.

Providing and fixing wash basin counter, 600mm wide, sandwitchtype with 18 to 20mm thick approved colour and quality Graniteslab on black cuddapah in CM 1:4 including necessary Cuddapahsupport making necessary holes in the counter for wash basin andpillar cock, vertical supports, fascias of granite 100mm widemoulding with edge polishing etc. complete as directed byEngineer in charge


28/54


NGS Page 28


22 Sqm 100

23 Sqm 314

24 Sqm 357

25 Sqm 504

26 Sqm 100

27 Sqm 449

28 Sqm 130

PAINTING WORKS

29 Sqm 314

30 Sqm 357

Providing and applying White Acrylic Wall Care Putty S.F/ orequivalent 3mm thk in two layers, water resistant white cement baseputty to concrete/previously plaster surface in all position includingpreparing the surface, filling the undulations, scaffolding, cleaningetc. complete. as per manufacturers specifications. As directed byEngineer in charge.

Plastering with cement mortar 1:3,9mm thick one coat floated hardand troweled smooth etc. complete.Plastering with cement mortar 1:4,12mm thick one coat floatedhard and troweled smooth etc. complete.

Providing external plastering in cement mortar using approvedscreened sand, in all positions including base coat of 15mm thick inC.M. 1:4 using waterproofing compound at 1kg per cement bagcuring the same for not less than 2 days and keeping the surface ofthe base coat rough to receive the second coat 6 to 8mm thick inC.M. 1:4 finishing the surface by taking out grains/tie rolling andcuring for fourteen days scaffolding etc.complete.

Add to cement plastering items for finishing with neat cementflushing coatDadoing walls with best quality glazed coloured tiles of fixedcement mortar 1:3, 12mm thick and pointing with coloured cementto match the tile etc. complete.

Providing and fixing Chicken mesh jali (22 gauge) or nearestavailableat the junction of 2 different surfaces of different materialcomponent at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and liftsetc.complete.

Distempering with oil bound distemper on new work two coatincluding smoothening with sand paper etc.complete.Painting with priming coat on wall surface using with water basedcement primer after sand papering and cleaning the surfaceetc.complete.


29/54


NGS Page 29

31 Sqm 50

32 Sqm 357

33 Sqm 504

WATER PROOFING

34 Sqm 251

STEEL WORK

35 Qtl 2

SANITARY AND WATER SUPPLY

36 Each 2

37 Each 2

Painting with Synthetic enamel paint Two coats after sand paperingand cleaning the surface etc.completePainting with Ready mixed plastic emulsion paint Two coats after sand papering and cleaning the surface etc.completePainting with Exterior Emulsion Paint two coats on walls prepared bycleaning and sand papering etc complete

Providing and laying water proof treatment on terrace with Brick BatCoba using approved water proofing compoundwith an averagethickness of 112mm consisting specialised material as per manufacturers specifications covering 10 years gauranteeonRs.100 /- stamp paper including all leads , lifts etc. complete.

Steel work welded in built up sections, railing and trusses with MStubes including all labour and hire charges for fabricating and costof materials and applying a coat of iron primer etc.complete. (LMRITEM)

S/F. best quality Orrissa pattern W.C. Pan white coloured 530x400mm or nearest size with P or S trap with P.V.C high level flushing cisternwith 1 No. cp. Angle valve,1 No. P.V.C.. connection includingsquatting plate form of size 900x700 mm and plastered over withcement mortar 1:3,with neat flushing coat etc.complete includingall cost of materials, conveyance etc

Providing and fixing European type white glazed earthenware wallhung W.C. Pan with PVC sheet cover C.P. bracket with chromiumplated brass hinges and rubber buffer including C.I. Soil and ventpipe upto the out side face of the wall10 litre PVC high level tank flushing cistern, 32mm dia. PVC flush pipe C.P. angle stop cock withfittings and clamps 20mm dia. G.I. overflow pipe with mosquitoproof grating making good walls and floors complete. as directedby Engineer-in charge.


30/54


NGS Page 30

38 Each 2

39 Each 10

40 Each 4

41 Each 4

42 Each 20

43 Each 4

S/F. best quality European type white coloured W.C. pan with P or S trap and black duroplastic seat and cover with P.V.C low levelflushing cistern with 1 No. C.P.. Angle valve,1 No. P.V.C. connection,etc.complete including all cost of materials, conveyanceetc.complete.

Providing and fixing a white glazed earthenware lipped flat back

type urinals large size with C.P. Brass inlet pipe, C.P. spreader, inbuiltASO make automatic sensor operated flush valve C.P. Stop cock,C.P. waste coupling, PVC waste pipe making good the damagedsurfaces etc. complete.

Supplying and fixing white glazed earthen ware Wash hand basin ofsize 550x400mm or nearest available higher size with 1 No:15 mmP.V.C.. connection ,1 No:15 mm C.P.. Angle valve, 1 No: 32 mm C.P..waste, 1 pair C.I. bracket or anchor bolt,1No: 32 mm P.V.C. waste ,1No CP pillar tap etc.complete.

Providing and fixing Coloured vitreous first quality OVAL SHAPE washhand basin 55cm x 40cm size including C.P. pillar cock, 32mm diaC.P. bottle trap, C.P. stop cock, C.P. Waste coupling, C.P. brackets,rubber plugs and brass chain, and necessary pipe connectionsincluding PVC waste pipe 32mm dia. etc complete.

Supplying and fixing Nahni trap with cement concrete using 20 mmbroken stone including cutting open, boring through masonry walls,RCC floors etc. and making good to the damages

Supplying and fixing 100 mm gully trap for the waste line with brick jelly concrete in lime mortar , necessary brick masonry aroundplastering CM .1:3,12 mm thick with neat flushing with coatetc.complete including providing 2Nos heavy CI. Gratings 150x150mm and 225x225 mm for the side, painted with black Japan painttwo inside and out coats and necessary earth work excavationetc.complete.


31/54


NGS Page 31

44 Each 10

45 Each 4

45

No. 10

46 Each 1

47 Each 8

48 Each 249 Each 4

50 Each 6

51 Each 10

52 Each 2

53 Each 10

Constructing silt pit 20 x20 cm up to 60cm depth inside dimensionwith half brick thick walls in lime mortar 1:2 for foundation 15 cmthick , plastering with cement mortar 1:3,12 mm thick with neatflushing coat etc.complete providing 2Nos heavy CI gratings150x150 mm and 225x225 mm for the inside and out side, paintedwith black Japan paint two coats and necessary earth work excavation etc.complete.

Providing and constructing Brick Masonry Inspection Chamber 90cmx 45cm x 60cm including 1:4:8 100mm thick, cement concretefoundation 1:2:4 cement concrete haunch half round G.S.W. pipes,230mm thick brick masonry, plastering from inside and outside RCCframe with cover etc. complete.

Providing and constructing 230mm thick Brick masonary Rainwaterchamber 60cm x 60cm x 60cm including 1:4:8 100mm thick cementconcrete foundation and 20mm thick cement plaster internallyincluding excavation refilling, RCC grating etc. complete.

Providing & constructing Circular Manhole 45 cm dia. at top 90 cmat bottom upto 1.80 metre depth including 150 dia. sewer trap,excavation, laying 1:4:8 cement concrete bedding, 230mm thick /345mm thick burnt brick masonry with 1:3 cement mortar. Plaster 25mm thick inside and outside cast iron heavy type cover withframe 125 kg in weight, C.I. steps refilling etc. complete.

Providing and fixing 450mm x 600mm size Superior type Belgiummirror with 6mm thick glass with C.P. Brass screws & 6mm thk plywood backing etc. complete.Supplying and fixing best quality 600x16 mm or nearest size C.P..brass towel rail with bracket good quality etc.completeProviding and fixing C.P Towel RingSupplying and fixing 150mm or nearest size CP toilet paper holder ofstandard size etc. complete.Supplying and fixing in position concealed type ceramic soap traywith all accessoriesProviding and fixing 15 mm or nearest size brass screw down bib tap (Superior quality) etc.completeProviding and fixing 15 mm or nearest size CP long body tap (Superior quality) etc.complete.


32/54


NGS Page 32

54 Each 5

55 Each 8

56 Each 8

57 Each 1

58 Each 1

59 Each 2

60 Each 1

61 Each 1

62 Each 24

63 Each 6

64 Each 10

65 Each 8

66 Rmt 150

67 Rmt 100

68 Rmt 100

Providing and fixing 15 mm or nearest size CP short body tap (Superior quality) etc.complete.Providing and fixing 15mm dia CP brass two way bib tap includingnecessary socket with flange etc completeProviding and fixing 15 mm or nearest size brass stop cock (Superior quality) etc.complete.

Providing and fixing 25 mm or nearest size full way brass valve withwheel (Superior quality) etc complete.Providing and fixing 32mm dia CP brass flush valveProviding and fixing 40 mm or nearest size full way brass valve withwheel (Superior quality) etc complete.Providing and fixing 15 mm or nearest size ball valve ( Superior quality) etc.complete.Providing and fixing 20 mm or nearest size ball valve ( Superior quality) etc.complete.Providing and fixing CP coat hook

Providing and fixing 15mm dia CP brass health faucet includingnecessary fittings etc complete

Providing and fixing Chromium plated Hot and cold water mixer unitheavy duty with C.P. shower with telephonic arrangement includingnecessary supply pipes 15mm dia and fittings like socket union, nutsbends valves reducers, including necessary drilling holes in wallsslabs etc. and remaking good the demolished portion to restore thesame in original condition neatly and cleaning the site after completion of work, testing etc. complete.

Providing and fixing C.P. adjustable type shower rose with 15 mm or

20mm inlet etc.complete.Supplying and laying 20 mm dia PVC pipe (12 kg/cm2) includingcost of all fittings such as tees, elbows, couplings, clamps, screwscost and conveyance of all materials etc.complete.

Supplying and laying 32 mm dia PVC pipe(12 kg/cm2) includingcost of all fittings such as tees, elbows, couplings, clamps, screwscost and conveyance of all materials etc.complete.

Supplying and laying 40 mm dia PVC pipe(10 kg/cm2) includingcost of all fittings such as tees, elbows, clamps, screws cost andconveyance of all materials etc.complete.


33/54


NGS Page 33

69 Rmt 10

70 Rmt 10

71 Rmt 10

72 Rmt 10

73 Rmt 30

74 Rmt 50

75 Rmt 20

76 Supplying and fixing 110 mm dia PVC Door Elbow etc.complete Each 5077 Supplying and fixing 110 mm dia PVC Plain Elbow etc.complete. Each 1078 Supplying and fixing 110 mm dia PVC Plain Tee etc.complete. Each 10

79 Supplying and fixing 110 mm dia PVC Door Tee etc.complete. Each 1080 Supplying and fixing 110 mm dia PVC Offset etc.complete. Each 1081 Supplying and fixing 110 mm dia PVC Vent cowl etc.complete. Each 682 Supplying and fixing 110 mm dia PVC Bend etc.complete. Each 1083 Supplying and fixing 110 mm dia PVC Door Bend etc.complete. Each 1084 Supplying and fixing 63 mm dia PVC Door Elbow etc.complete. Each 1085 Supplying and fixing 63 mm dia PVC Plain Elbow etc.complete. Each 1086 Supplying and fixing 63 mm dia PVC Plain Tee etc.complete. Each 1087 Supplying and fixing 63 mm dia PVC Door Tee etc.complete. Each 1088 Supplying and fixing 63 mm dia PVC Offset etc.complete. Each 10


Supplying and laying 25 mm dia PVC pipe(12 kg/cm2) includingcost of all fittings such as tees, elbows, checknut, clamps, screws

cost and conveyance of all materials trenching to a minimumdepth of 0.50 m and re-filling etc.complete. (External work)



Supplying and laying 50 mm dia PVC pipe(10 kg/cm2) including

cost of all fittings such as tees, elbows, checknut, clamps, screwscost and conveyance of all materials trenching to a minimumdepth of 0.50 m and re-filling etc.complete. (External work)

Supplying and laying 63 mm dia PVC pipe (4 kg/cm2) etc.completesewerage lines.Supplying and laying 110 mm dia PVC pipe (4 kg/cm2)etc.complete sewerage lines.


34/54


NGS Page 34

89 Supplying and fixing 63 mm dia PVC Bend etc.complete. Each 10

MISCELLANEOUS ITEMS

90 Sqm 131

91 Sqm 40

Providing and fixing False ceiling of 15 to 20mm thick decorativeboards of fibrous plaster of Paris including scaffolding if necessary,including all architectural features like mouldings, cornices, covers,

domes, cups as per detailed drawings and with three coats of spraypainting to boards including heavy duty frame work of G.I. runnersand suspenders including cost, conveyance of all materials andlabour charges etc. complete.

Supplying and fixing P.V.C hollow laminated bath room door ofgood quality with door shutters consisting of door frame, shutter frame, middle rail and infill panel made from PVC conforming to IS10151-1982. Infill panel shall have a thickness of 20mm with wallthickness 1.50mm, shutter frame of size 59mmx24mm with polymericL type corners. Door frame dimensions to be 48mmx40mm withthickness 1.5mm and fixed to wall with concealed cleat or screw.

The item include cost of butt hinges, 2 nos door handles, 2 nos PVCaldrops etc

l l l d l b ( d) k d ll


35/54


NGS Page 35

92 Sqm 18

148 Sqm 12

Providing and fixing in position anodised (20 mircon) (As per IS1868/1982) Alluminium powder coated sliding window of twotracks / three tracks with SS 304 20X30 micron mosquito proof net (Indal / Gindal) as per detailed drawing and as directed byEngineer in charge with all necessary alluminium sections fixtures

and fastenings such as roller bearing in nylon casing and self lockingconcealed lock (Star/ Standerd make) fitted in vertical section ofshutter including 5mm thick plain glass with all required screws nuts& sealing the joints between wall & window with silicon sealent etc.complete. (only weight of alluminium section shall be consideredfor payment) NOTE: While arriving at the rate of item weight @ 6.9kg/ sqm. is to be considered.SECTION DETAILS:- 1) 2TRACK(Top)SECTION NO.20839 Weight-0.784 Kg/per m. 2) 2TRACK(Bottam)SECTION NO.20830 Weight-0.909 Kg/per m. 3) 3TRACK(Top)SECTION No.20831 Weight-1.060 Kg/per m 4) 3TRACK(Bottam)SECTION No.20832 Weight-1.248 Kg/per m 5) Top /Bottam-20736 Weight- 0.547 Kg/per m 6)Handle- 20738

Weight- 0.547 Kg/per m 7) Interlock- 20737 Weight-0.607 Kg/per m

Providing and fixing in position Aluminium powder coated partlyopen able and partly fixed window / Ventilators (20 micron) (Indal /Gindal) of any size as per detailed drawing and as directed byEngineer-in-charge with all necessary aluminium sections includingnecessary fixtures and fastening such as aluminium latch, aluminiumstay, tower bolts, PVC gasket and rubber lining, aluminium screws,hinges etc. with 5mm thick clear float glass etc. complete. NOTE:

While arriving at the rate of item weight @ 6.9 kg/ Sqm is considered.

N i l G K l Ci il d Pl bi (E S d) H k S di K ll


36/54


NGS Page 36

93

Sqm 15

94 Sqm 14

95 Sqm 5

Providing and fixing solid core flush door in Double leaf leaves32mm thick , decorative type of exterior grade as per detaileddrawings including superior indian teak wood door frame 75mm x125mm approved face laminates 1mm thick on both face withglazing and venetion in the position shown on the drawings or asdirected all necessary beads, moulding and lipping finishing withsynthetic enamel paint of approved make etc. complete. (All doorfittings are of GODREJ MAKE) 1. Hinges- SS 304 Ball bearings- 3" x 4"

x 3mm - 8 Nos. 2. Europrofile Multibolt Mortise Lock in SS Finish (3571)with SS 304 Tube Lever Handle D type with Square Plate and ThumbTurn (3715) and EXS Pin Cylinder 60mm 1CK in master keyarrangement. 3. Door closers - Delta series door closer D74 (85PS4-silver) code (9415) with 90 o hold open arm :- 2no 4. Rubber buffers -1Nos. 5. Brass oxidesed door stoper - 2 Nos. 6. Heavy duty tower bolt(SS 304 300mmlong) :- 2 no.

Providing and fixing solid core flush door in single leaf 32mm thick decorative types, of exterior grade as per detailed drawings,

including superior indian teak wood door frame 75mm x 125mmapparoved face laminates 1mm thick on both face with glazingand venetions in the position shown on the drawing or as directedall necessary beads, mouldings and lipping, wrought iron hold fasts,with finishing with synthetic enamel paint of approved makeh etc.complete. BDT-34 Page. N.499 (All door fittings are of GODREJMAKE) 1. Hinges- SS 304 Ball bearings- 3" x 4" x 3mm - 8 Nos. 2.Europrofile Multibolt Mortise Lock in SS Finish (3571) with SS 304 TubeLever Handle D type with Square Plate and Thumb Turn (3715) andEXS Pin Cylinder 60mm 1CK in master key arrangement. . 3. Door closers - Delta series door closer D74 (85PS4-silver) code (9415) with90o hold open arm :- 1no 4. Rubber buffers -1 Nos. 5. Brass oxideseddoor stoper - 1 Nos. 6. Heavy duty tower bolt(SS 304 300mm long) :-1no.

Extra for providing and fixing 3mm thick veneers on both sides offlush doors shutter instead of 1mm thick laminate using Fevicol,Melamine polishing etc complete

N ti l G K l Ci il d Pl bi g(E t St d) H k St di K ll


37/54


NGS Page 37

96 Sqm 10

97 Sqm 358

98 Sqm 358

99

a) 150mm dia Rmt 50

Providing and fixing Rolling shutter fabricated from steel laths ofminimum thickness 0.9mm with lock plate of 3.15 mm thicknessreinforced with 35 x35 x 5mm angle section fitted with sliding boltsand handles for both sides, deep M.S. channels section of depthand thickness not less than 65mm and 3.15mm respectively withhold fast arrangement, M.S. bracket plate 300 x 300 x 3.15mm

minimum size and shape with square bar suspension shaft ofminimum 32mm diameter, hood cover of M.S. sheet not less than0.9mm thickness and of any size at top and safety devices includingmechanical gear operation arrangement consisting of worm gear wheels and worms of height grade cost iron or mild steel and onecoat of red lead primer etc. complete.

Providing and applying preconstructional Antitermite treatment for foundation and plinth as per IS 6313 Part - II with covering 10 yearsguarantee on 100 rupees stamp paper submitted to Client/Architect in approved proforma etc. complete. Antitermitetreatment to be carried out from foundation to plinth as per stagesgiven in the IS 6313 Part II. However Measurement for payment willbe as per plinth area only.

Providing and laying in position 300 micron low density polyethylenesheets (LDPE sheets) of specified thickness of approved make andquality below grade slab, raft slab, embankments paving etc. withnecessary pressure adhesive tapes or with serrated joints made byan electric iron rod complete as directed and instructed byEngineer / owner. (minimum lap of sheets shall be 50 to 75mmunless noted otherwise.)

Providing and laying concrete pipes of I.S. NP2 class of requireddiameter in proper line, level and slope including necessary collars,excavation laying, fixing collars in cement mortar, 1:1 and refillingthe trench etc. complete.

National Games Kerala Civil and Plumbing(East Stand) Hockey Stadium Kollam


38/54


NGS Page 38

100

a) 150mm dia Rmt 86b) 110mm dia Rmt 10

101 Ltr 5,000

102 Sqm 98

Total for Civil and Plumbing works (Rs.)

Supplying and fixing UPVC Rainwater pipe of required diameter conforming to I.S.-13592, & I.S.- 4985 to withstand continuous internalhydraulic pressure of 4 kg / Sq.cm. including necessary fixtures andfittings, such as bends, tees, single junctions, double junctions and

joining with rubber rings and lubricants, on wall by means of cl ips or in ground including necessary fitting etc. complete.

Providing and fixing PVC overhead water tank including over flowpipe, wash out pipe etc. complete.

Providing plinth protection 1000 mm wide with 230mm thick solingand 100mm thick PCC M 15 around building including excavationetc. complete.

National Games Kerala UG Tank Hockey Stadium Kollam


39/54

National Games, Kerala UG Tank Hockey Stadium, Kollam

NGS Page 39



UG Tank & Pump House

BILL OF QUANTITIES FOR CIVIL & PLUMBING WORK

Item Description Unit Rate (Rs) Quantity Amount (Rs)


1 Sqm 46

EARTHWORK

2 Cum 147

MORTAR AND CONCRETE

3 Cum 4

4 Cum 19

5 Cum 25

6 Cum 8

SlNo

Rate (in words)Rupees

Clearing grass and removing growth of vegetations and small trees of girthup to 30 cm including rooting out and removal of rubbish upto a distance of150 m outside the periphery of the area cleared etc. complete

Earth work excavation in all classes of soil except hard rock and depositingincluding braking clods, watering, ramming and sectioning spoil bank including all leads , lifts etc. complete as per the direction of Engineer-In-Charge.

Cement concrete 1:3:6 ( 1 cement: 3 sand: 6 stone aggregate) using 40mm(nominal size) hard granite broken stone including all leads and lift wateringcuring etc. complete for ground floor

Reinforced Cement Concrete 1:11/2:3 ( 1 cement: 1 1/2 sand: 3 stoneaggregate) with 20 mm down size graded hard stone aggregate includingall formwork, watering, curing etc complete but excluding reinforcement for footing, foundation and grade slab

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3 stoneaggregate ) with 20 mm down size graded hard stone aggregate forcolumns, walls including all formwork, watering, curing etc complete butexcluding reinforcement upto plinth level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3 stoneaggregate) with 20 mm down size graded hard stone aggregate for slabsand landing including all formwork, watering, curing etc complete butexcluding reinforcement for slabs from plinth upto first floor



40/54


NGS Page 40

7 Qtl 52

BRICKWORK

8 Cum 17

FLOORING

9 Sqm 18


10 Sqm 69

11 Sqm 72

PAINTING WORKS

12 Sqm 69

13 Sqm 72

STEEL WORK

Providing and fixing in position HYSD bar reinforcement Fe 415 of variousdiameters for footings, foundations, slabs, beams and columns, canopies,staircase, newels, chajjas,lintels,copings, etc. as per detailed designs,drawings and schedules including cutting, bending, hooking the bars,binding with binding wires as required etc. complete.

Brick work in cement mortar 1:6 ( 1 cement: 6 sand) using country burntbricks of size 22.9x11.2x7 cm good quality for super structure including all hireand labour charges for all scaffolding charges watering curing all leads andlift etc. complete for Ground floor

Providing and laying cement concrete flooring 50mm thick with 1:2:4cement concrete laid to proper level and slope in alternate bays, includingcompacting, glass strips at joints marking lines to give appearance of tiles of30cmx 30cm or other size laid diagonally / square etc. finishing smooth withextra cement in any colour as directed and curing etc. complete.

Plastering with cement mortar 1:4,12mm thick one coat floated hard andtoweled smooth etc. complete.

Providing external plastering in cement mortar using approved screenedsand, in all positions including base coat of 15mm thick in C.M. 1:4 usingwaterproofing compound at 1kg per cement bag curing the same for notless than 2 days and keeping the surface of the base coat rough to receivethe sand /faced treatment 6 to 8mm thick in C.M. 1:4 finishing the surface by

taking out grains/tie rolling and curing for fourteen days scaffoldingetc.complete.

Distempering with oil bound distemper on new work two coat includingsmoothening with sand paper etc.complete.Painting with Exterior Emulsion Paint two coats on walls prepared bycleaning and sand papering etc complete



41/54


NGS Page 41

14 Qtl 37

MISCELLANEOUS ITEMS

15 Sqm 19

Steel work welded in built up sections and trusses with MS angles, tees etc .including all labour and hire charges for fabricating and cost of materialsand applying a coat of iron primer etc.complete.

Fabrication, supply, erection and fixing of cold rolled colour coatedzincalume steel (AL-55%, ZN-43.5%) profiled sheets conforming to AS 1397-AZ150 / ASTM A 792 of 0.58mm TCT (Total coated thk) having minimum yieldstrength of 550 Mpa corugated to suti a purlin spacing at 1.65 m center withstanding scam / clippon profile (N0 penetration of he external roof surfaceshall be allowed except where longitudinal laps are provided) withcompatibole concealed fixing clips, fasteners for fixing clips of approvedamke quality and type. The sheet are to be pre-painted exterior modifiedweathering polyester paint system (XRW colour bond or equivalentconforming to AS 2728 cateogry or equivalent). The minium dry film thickness(DFT) of paint system shall be top coat of minimum 20 microns over 5 micronepoxy primer and back coat of 5 micron (minimum) over 5 micron primer.The quoted rates shall be inclusive of all laps corrugations, wastages,diagonal, cutting all as per drawing and site requirement. The measurementshall be based on finished / covered roof area. The quoted rate shall beinclusive of supply of material, colour coating, profiling, supply of fixture /fasteners, sealants, colour cap, flashing, capping, trims, storage of material,loading, transportation, unloading, all machinery, plant, equipment, labour,testing, supervision for fixing etc. The agency may be required o submitdesign calculation in support of proposed profile shet and over all fixingsystem for structural properties, standard loading etc. to the satisfaction ofdesign consultant and client. The sheet after profiling should be capable oftaking curvature as envisaged in the drawing. Sheets shall be supplied /profiled, crimed at site in the required shape and girth and fixing with fixturescompatible with the system. Silicon sealant non-hardening, neutral cure typeshall be applied at all end laps. Overall system shall be so designed thatthere are no leakages.



42/54


NGS Page 42

16 Sqm 3

17 Sqm 3

Providing and fixing in position anodised (20 mircon) (As per IS 1868/1982)Alluminium powder coated sliding window of two tracks / three tracks withSS 304 20X30 micron mosquito proof net (Indal / Gindal) as per detaileddrawing and as directed by Engineer in charge with all necessaryalluminium sections fixtures and fastenings such as roller bearing in nyloncasing and self locking concealed lock (Star/ Standerd make) fitted in

vertical section of shutter including 5mm thick plain glass with all requiredscrews nuts & sealing the joints between wall & window with silicon sealentetc. complete. (only weight of alluminium section shall be considered for payment) NOTE: While arriving at the rate of item weight @ 6.9 kg/ sqm. is tobe considered.SECTION DETAILS:- 1) 2TRACK(Top) SECTION NO.20839Weight-0.784 Kg/per m. 2) 2TRACK(Bottam) SECTION NO.20830 Weight-

0.909 Kg/per m. 3) 3TRACK(Top) SECTION No.20831 Weight-1.060Kg/per m 4) 3TRACK(Bottam) SECTION No.20832 Weight-1.248 Kg/per m 5) Top /Bottam- 20736 Weight- 0.547 Kg/per m 6)Handle-20738 Weight- 0.547 Kg/per m 7) Interlock- 20737Weight-0.607 Kg/per m

Providing and fixing solid core flush door in single leaf 32mm thick decorative types, of exterior grade as per detailed drawings, includingsuperior indian teak wood door frame 75mm x 125mm apparoved facelaminates 1mm thick on both face with glazing and venetions in the positionshown on the drawing or as directed all necessary beads, mouldings andlipping, wrought iron hold fasts, with finishing with synthetic enamel paint ofapproved makeh etc. complete. BDT-34 Page. N.499 (All door fittings are ofGODREJ MAKE) 1. Hinges- SS 304 Ball bearings- 3" x 4" x 3mm - 8 Nos. 2.Europrofile Multibolt Mortise Lock in SS Finish (3571) with SS 304 Tube Lever Handle D type with Square Plate and Thumb Turn (3715) and EXS Pin Cylinder

60mm 1CK in master key arrangement. . 3. Door closers - Delta series door closer D74 (85PS4-silver) code (9415) with 90o hold open arm :- 1no 4. Rubber buffers -1 Nos. 5. Brass oxidesed door stoper - 1 Nos. 6. Heavy duty tower bolt(SS 304 300mm long) :- 1no.



43/54


NGS Page 43

18

Sqm 144

Total Amount for Civil & Plumbing Works (Rs.)

Providing and laying Box type water proofing to the floors and walls consistof water proofing in single layer of cement mortar 1:4 and 25mm thick above which rough shahabad ladi (stone) of 25mm thick and above thislaid 20mm thick 1:4 cement mortar with water proofing compound @1kgcement bag including the bottom mast layer at aggregates 6 cu.f./ 10 Sq.mfixed in cement slurry including curing finishing etc. complete with 10 yearsguarantee on required court fees stamps etc. complete. as directed by

Engineer in charge.

National Games, Kerala Sub station Hockey Stadium, Kollam


44/54

, y ,

NGS Page 44



Substation Building

BILL OF QUANTITIES FOR CIVIL & PLUMBING WORK

Item Description Unit Rate (Rs) Quantity Amount (Rs)


1 Sqm 90

EARTHWORK

2 Cum 139

3 Cum 27

MORTAR AND CONCRETE

4 Cum 12

5 Cum 37

SlNo

Rate (in words)Rupees

Clearing grass and removing growth of vegetations and smalltrees of girth up to 30 cm including rooting out and removal ofrubbish upto a distance of 150 m outside the periphery of thearea cleared etc. complete

Earth work excavation in all classes of soil except hard rock anddepositing including braking clods, watering, ramming andsectioning spoil bank including all leads, lifts etc. complete as per the direction of Engineer-In- Charge.

Filling in plinth and floors with approved Excavated materials in15cm to 25cm layers including watering and compacting etccomplete

Cement concrete 1:3:6 ( 1 cement: 3 sand: 6 stone aggregate)

using 40mm (nominal size) hard granite broken stone including allleads and lift watering curing etc. complete for ground floor

Reinforced Cement Concrete 1:11/2:3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate including all formwork, watering, curing etc completebut excluding reinforcement for footing, foundation and gradeslab



45/54

, y ,

NGS Page 45

6 Cum 7

7 Cum 6

8 Cum 13

9 Cum 10

10 Qtl 73

BRICKWORK

11 Cum 4

12 Cum 49

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate ) with 20 mm down size graded hard stoneaggregate for columns, walls including all formwork, watering,curing etc complete but excluding reinforcement upto plinthlevel

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) for columns, walls including all formwork,watering, curing etc complete but excluding reinforcement fromplinth upto first floor level

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for slabs and landing including all formwork,watering, curing etc complete but excluding reinforcement for slabs from plinth upto first floor

Reinforced cement concrete 1:11/2: 3 ( 1 cement: 1 1/2 sand: 3stone aggregate) with 20 mm down size graded hard stoneaggregate for sunshades, lintels, beams, staircases, gutter slabs etc. including all formwork, watering, curing etc complete butexcluding reinforcement from plinth upto first floor level

Providing and fixing in position HYSD bar reinforcement Fe 415 ofvarious diameters for footings, foundations, slabs, beams andcolumns, canopies, staircase, newels, chajjas,lintels,copings, etc.as per detailed designs, drawings and schedules includingcutting, bending, hooking the bars, binding with binding wires asrequired etc. complete.





46/54

NGS Page 46

STONE MASONRY

13 Cum 26

FLOORING

14 Sqm 81


15 Sqm 324

16 Sqm 189

17 Sqm 50

PAINTING WORKS

18 Sqm 324

19 Sqm 189

Providing dry / trap / granite / quartzite / gneiss Rubble stonesoling 15cm to 20cm, thick including hand packing andcompacting complete.

Providing and laying cement concrete flooring 50mm thick with1:2:4 cement concrete laid to proper level and slope in alternatebays, including compacting, glass strips at joints marking lines togive appearance of tiles of 30cmx 30cm or other size laiddiagonally / square etc. finishing smooth with extra cement in anycolour as directed and curing etc. complete.

Plastering with cement mortar 1:4,12mm thick one coat floated

hard and toweled smooth etc. complete.Providing external plastering in cement mortar using approvedscreened sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg per cementbag curing the same for not less than 2 days and keeping thesurface of the base coat rough to receive the sand /facedtreatment 6 to 8mm thick in C.M. 1:4 finishing the surface bytaking out grains/tie rolling and curing for fourteen daysscaffolding etc.complete.

Providing and fixing Chicken mesh jali (22 gauge) or nearestavailableat the junction of 2 different surfaces of different

material component at the time of plastering to prevent crackingin plaster surface as and where directed at all floors with all leadsand lifts etc.complete.

Distempering with oil bound distemper on new work two coatincluding smoothening with sand paper etc.complete.Painting with Exterior Emulsion Paint two coats on walls preparedby cleaning and sand papering etc complete



47/54

NGS Page 47

MISCELLANEOUS ITEMS

20 Sqm 42

21 Sqm 5

22 Sqm 33

23 Sqm 90

Providing plinth protection 1000 mm wide with 230mm thick solingand 100mm thick PCC M 15 around building including excavationetc. complete.

Providing and fixing in position Alluminium powder coated partlyopen able and partly fixed window / Ventilators (20 micron) (Indal

/ Gindal) of any size as per detailed drawing and as directed byEngineer-in-charge with all necessary aluminium sectionsincluding necessary fixtures and fastening such as aluminiumlatch, aluminium stay, tower bolts, PVC gasket and rubber lining,aluminium screws, hinges etc. with 5mm thick clear float glass etc.complete. NOTE: While arriving at the rate of item weight @ 6.9kg/ Sqm is considered.

Providing and fixing Rolling shutter fabricated from steel laths ofminimu

civil bpq kollam

Documents