civil eng single page - scientific publishers · to verify the law of parallelogram of forces &...

ISBN : 978-81-7233-6141; Year : 2018;

Pages: 1058; ` 650

ISBN : 978-93-8610-2409; Year : 2017;

Pages: 338; ` 350

Teachers ResearchersStudents

1www.scientificpub.com

LEADING PUBLISHEROF INDIA FOR THE

DELHI OFFICE : 4806/24, Ansari Road,

Daryaganj,

New Delhi - 110 002 (India)

Telefax : +91-11-41511055

5-A, New Pali Road, P.O. Box 91,

- 342 001 (India)JODHPUR

Tel. : +91-291-2433323, 2624154

Fax. : +91-291-2613449

E-mail : [email protected] Books2017-18

:CONTENT

Future scien�sts, engineers, public health workers face challenges which were predicted, but

certainly not expected to emerge this soon and to the magnitude presently occurring. The

problems and projected solu�ons in this book cover a broad spectrum of issues including

industrial and domes�c solid wastes, air pollu�on and associated global warming, noise pollu�on

and safety. Many engineering elements go into developing solu�ons to these problems including

the need for addi�onal detailed mapping and surveying, developing improved waste water

treatment, including the development of more eco-friendly process and importance on

conserva�on. Issues such as environmental assessments now play a most important role in

prac�cally all proposed developments. Old landfills are being mined for fuel, new landfills are

designed to prevent waste materials from migra�ng to groundwater and new approaches to

waste incinera�on focus on energy recovery and conversion of waste materials into usable

materials. This text should help engineers and scien�sts meet the environmental challenges.

Environmental Engineering and SafetySangeeta Raut & Sudip Kumar Sen

1. Introduc�on

2. Ecology

3. Chemistry in

Environmental Engineering

4. Water Treatment

5. Waste Water Treatment

6. Air Pollu�on

7. Solid Waste Management

8. Hazardous Waste Management

9. Occupa�onal Safety and Health

10. Hazard Control Measures

11. Product Safety

12. Safety Handling and Storage

of Hazardous Materials

:CONTENT

Limit State Design of Steel StructuresRamchandra & V. GehlotMethod of Limit State (Ul�mate Limit State, ( ) and serviceability limit state ( )) present anULS SLS

improved design philosophy and makes allow-ance for the short-compings of working stress method

(conven�onal and long �me used in prac�ce). This method provides basic framework, within which

the performance of the steel structures may be assessed against various limi�ng condi�ons and invo-

lves some concept of probability. Object of limit design method is to get steel structure that will remain

fit for use during its life with acceptable target reliability. The probability of a limit state being reached

during its life �me is kept very small. This method has been broadly adopted in many developed

countries and based on the recommenda�ons of : 800-2007 (Third Revised Edi�on). This method hasIS

been covered in nine parts (in twenty six chapters and four appendices) as listed in contents. A�er

introducing `Limit State Method of Design of Concrete Structures ( : ) in : 456-1978, it wasLSD CC IS

natural for Bureau of Indian Standard to introduce `Limit State Design of Steel Structures ( : ).LSD SS SI

units for text for complete book, uncertain�es involved in the working stress method and the concept

of par�al safety factors for the loads and strength of mate-rials (for yield and ul�mate stresses

reached) are the special feature of the book. Concepts of shear centre for thin-walled beam cross-

sec�ons and unsymmetrical bending of beams are important for various requirements and have been

included in appendices. The text of book has been covered in about 1000 pages and 550 diagrams. The

texts of varioustopicshasbeenexplained inmanyillustra�veworked-outexamples.

Part - I. Part - .Structural steel, Sec�ons structures, codes and specifica�ons; Loads (Ac�ons), Methods ofII

Analysis and Design and Proper�es of Steel; Concept of Limit State Method of Analysis; MethodPart - . Part - .III IV

of Ul�mate Limit State ( ) and Serviceability Limit State ( ) and par�al safety factors for loads and strength ofULS SLS

materials; Design of Columns and Compression; Design of Tension Members; DesignPart - V. - . - .PART VI PART VII

of Beams; Design of Plate Girders Welding and Design of Welded Joints.- . ; - .PART VIII PART IX APPENDICES

Engineering Civil

ENG/10/17

ISBN : 978-81-7233-6547; Year : 2016;

Pages: 984; ` 650

ISBN : 978-81-7233-6448; Year : 2017;

Pages: 972; ` 625

2 www.scientificpub.com

Design of Steel Structures Vol.2

Eight edi�on of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in

1989), and : 800-2007. Authors have distributed present text in the edi�on in thirty two chaptersIS

[that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members

of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the

method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium

structures. In order to emphasize that similar to various other subjects, this subject is also very vast.

Therefore, space steel structures and stressed-skin steel structures have been described special

features of this new-edi�on of this book may be men�oned as under (1) Historical development of

different types of steel bridges details of some spans of longest spans of various types of steel

bridges, (2) Design of Guyed Steel Chimneys (3) Instantaneous Centre of Rota�on ( ) and Plas�cICR

Analysis of Pitched slope (i.e., gable structure) and influences of axial forces and shear forces on the

plas�c moment of resistance of the member cross-sec�ons.

:CONTENT

PART I. Steel Bridges

PART II. Special Steel Structures

PART III. Design Of Aluminium Strcutures

10 Chapters:

:

:

16 Chapters

01 Chapter Index

PART IV. Analysis Of Structures :

PART V. Other Special Steel Structures : 03 Chapters

02 Chapters

Ramchandra & V. GehlotTwel�h edi�on, 2009 of this book is based on : 800-2007 and also newly revised : 883-1994IS IS

(code of prac�ce for �mber structures). New code of prac�ce, : 800 is likely to be issued soon. ItIS

is likely to introduce ``Limit State Design of Steel Structures''. Authors have distributed the text in

thirty four chapters in main text and one chapter `on Loca�on of Shear Centre' in Appendix A.

Concept of Shear Centre and bending axis is important and significant and essen�ally needed to

understand simple theory of bending and so also unsymmetrical bending. Complete-text has

been updated and new ma� er added (e.g., elas�c buckling, inelas�c, stability and instability of

columns and compression members, torsional-buckling, torsional-flexural buckling, etc.).

Behaviour of web-s�ffeners and web-panels specially near the end panels, tension-field ac�on

has been first �me included to familiarise the students with the concept. Durability of steel

members have been emphasized phenomenon of corrosion has been dis�nctly explained.

Design of Steel Structures Vol.1

:CONTENT

PART I. Steel Structures

PART II. Timber Structures

PART III. Masonry Structures

26 Chapters:

:

:

06 Chapters

02 Chapter

IndexAPPENDIX A- Shear Centre in Open-Thin Walled Sec�ons

Ramchandra & V. Gehlot

ISBN :978-81-7233-804-6;Year : 2013;

Pages: 172; ` 1450

ISBN : 978-81-7233-549-6;Year : 2013;

Pages: 454; ` 380

ISBN : 978-81-7233-787-2;Year : 2014;

Pages: 335; ` 325

ISBN : 978-81-7233-659-2;Year : 2012;

Pages: 1054; ` 590

ISBN : 978-81-7233-486-4;Year : 2018;

Pages: 972; ` 590


ISBN : 978-81-7233-5229; Year : 2008;

Pages: 765; ` 350

ISBN : 978-81-7233-9302; Year : 2015;

Pages: 86; ` 175

Engineering Mechanics Lab ManualA.K. Gupta & Mohit Bhoot

The book has been prepared in the form of a 'complete package' that includes, the experiments

which have been wri� en very carefully mee�ng the standard adopted procedures, descrip�ve

figures that aid the understanding, discussion sec�ons that intrigues the analy�cal & ra�onal

thinking, objec�ve ques�ons por�on & a wide reference list for detailed study. The language has

been used keeping in view the wide readership which includes students, demonstrators, lecturers,

field personnel & others. The selec�on of the experiments has been done very precisely,

incorpora�ng the very important ones from the subject.

1. 2.To verify the Law of Parallelogram of forces & the Lami’s Theorem; To verify the Polygon law of

forces; To determine the forces in the members of a Jib Crane; To determine the Reac�ons at the3. 4.

supports of a Simply Supported Beam; To determine the Coefficient of Fric�on between two5.

surfaces on a horizontal plane; To determine the Coefficient of Fric�on between two surfaces on an6.

inclined plane; To verify the Principle of Moments using Bell Crank Lever; To verify the Principle of7. 8.

Moments using Compound Lever; To determine the Mechanical Advantage, Velocity Ra�o &9.

Efficiency of First System of Pulleys; To determine the Mechanical Advantage, Velocity Ra�o &10.

Efficiency of Second System of Pulleys; To determine the Mechanical Advantage, Velocity Ra�o &11.

Efficiency of Third System of Pulleys; To determine the Mechanical Advantage, Velocity Ra�o,12.

Efficiency & Law of Machine for the Weston’s Pulley Block; To determine the Mechanical13.

Advantage, Velocity Ra�o, Efficiency & Law of Machine for a Worm & Worm Wheel; To determine14.

the Mechanical Advantage, Velocity Ra�o & Efficiency of a Differen�al Wheel & Axle; To determine15.

the Mechanical Advantage, Velocity Ra�o, Efficiency & Law of Machine for a Screw Jack; To16.

determine the Mechanical Advantage, Velocity Ra�o & Efficiency of a Single Purchase Crab Winch; 17.

To determine the Mechanical Advantage, Velocity Ra�o, Efficiency & Law of Machine for a Double

Purchase Crab Winch; To determine the Mass Moment of Iner�a of a Flywheel18.

Mul�ple Choice Objec�ve Ques�ons; References

:CONTENT

MechanicalEngineering

Engineering Thermodynamics

R.K. PurohitThis book an Engineering Thermodynamics presents the principles and applica�ons of the

subject and covers the en�re syllabus prescribed by various universi�es for undergraduate

students. Needles to emphasise, this new book has been designed as a self learning capsule. With

this aim the material has been organised in a logical order with lots of illustra�ve examples to

enable students to thoroughly master the subject.

1. Basic Concepts Related to Thermodynamics

2. Work and Heat

3. The First Law of Thermodynamics

4. First Law Applied To Flow Process

5. The Second Law of Thermodynamics

6. Entropy

7. Availability and Irreversibility

8. Proper�es of Pure Substance

9. Equa�on of States

:CONTENT

10. Thermodynamic Rela�ons

11. Vapour Power Cycles

12. Gas Power Cycles

13. The Tes�ng of EnginesIC

14. Refrigera�on

15. Gas Mixtures

16. Psychrometrics

17. Compressible Fluid Flow

Index

ISBN : 978-81-7233-8169; Year : 2013;

Pages: 206; ` 425

ISBN : 978-81-7233-6912; Year : 2011;

Pages: 835; ` 490

ISBN : 978-93-8634-799-2; Year : 2017;

Pages: 350; 290


Founda�on of Mechanical Engineering is solely wri� en with the view to help B.E. I year students

tomaster the difficult concepts. Needless to emphasise, this new book has been designed a self learning

capsule. With this aim in view, the material has been organised in a logical order and lots of solved

problems and line diagrams have been incorporated to enable students to thoroughly master of the

subject. It is believed that this book, solely for B.E. I year students of all branches of Engineering, will

cap�vatethea� en�onof seniorstudentsaswellas teachers.

1. 2.Basic Concepts related to Thermodynamics The First Law of Thermodynamics

3. 4.The Second Law of Thermodynamics and Entropy Proper�es of Stem

5. 6. 7.Steam Generators Boiler Moun�ng and Accessories Vapour Power Cycles

8. 9. 10.Stream Engines Gas Power Cycles Internal Combus�on Engines;

Air Compressors Power Transmission Heat Transfer11. 12. 13.

:CONTENT

Foundation of Mechanical EngineeringR.K.Purohit

The book is in the form of a ready reference. The subject ma� er of stra�graphy is full of names of

forma�ons, groups, etc. At �mes when we need to know about a certain forma�on for which we do

not know the exact stra�graphic posi�on, then we have to search the en�re book, page by page,

which becomes quite irrita�ng and �me consuming. To overcome this problem, the idea of arranging

the different forma�ons in an alphabe�c order occurred to the author. During this process it was seen

that many small forma�ons, which are otherwise important, do not get their due representa�on,

because they lie in company or associa�on with much larger forma�ons. Otherwise also stra�graphy

is nothing but an orderly and chronological arrangement of different forma�ons. In other words, we

can say that stra�graphy is a language by itself, where different forma�ons are its words. Same is the

case with large number of fossils occurring in different forma�ons. In the usual literature on the

subject, it is prac�cally impossible to find in what forma�on or forma�ons a par�cular fossil occurs

and to which fossil group it belongs. Alphabe�cal arrangement of fossils as shown in the list of fossils

will help students and scholars to persue their task in an easier and quicker way. To arrange such a

large number of fossils in an alphabe�cal order and to find their fossil groups was really a tough job.

S�ll the author does not claim that all the forma�ons and fossils occurring in the Indian stra�graphy

are included in this book, and it cannot be the last word on the subject. This is more true in case of

fossils, where unlimited literature is available.

Fluid Mechanics - RTU(for Rajasthan Technical University)

Kamlesh PurohitS.P. HarshaR.K. Purohit

1. 2. 3. 4.List of Forma�ons; Descrip�on of Forma�ons; List of Tables; List of fossils with theiroccurrences and fossils groups; List of fossiliferous forma�ons with their fossils;5.

List of fossil groups pertaining to this book; Details of the fossil groups;6. 7.List of fossils as per the fossil groups; List of fossiliferous forma�ons.8. 9.

:CONTENT

4th Edition

Other Related Books

ISBN : 978-81-7233-6493;Year : 2010;

Pages: 265; 190

ISBN : 978-93-8623-799-6;Year : 2017;

Pages: 506; 425

ISBN : 978-81-7233-6509;Year : 2010;

Pages: 300; 180

www.scientificpub.com

ISBN : 978-81-7233-8299; Year : 2013;

Lib. Ed.; Pages: 626; ` 470

ISBN : 978-81-7233-7575; Year : 2012;

Pages: 1364; ` 520

Hydraulics and Hydraulic Machines(for Rajasthan Technical University)

The material in the book has been presented in a very simple but effec�ve language in order to

enable students to master the subject ma� er thoroughly without coming across the hurdle of

highly technical language. Needless to emphasise, this book has been designed as a self learning

capsule. With this aim the material has been organised in a logical order with lots of illustra�ve

examples to enable students to thoroughly master the subject.

:CONTENT

1. Dimensional Analysis and Simlitude

2. Laminar Viscous Flow

3. Turbulent Flow Through Pipes

4. Open Channel Flow

5. Rapidly Varied Flow

6. Waves and Surges In Open Channel

7. Impact of Free Jets

28 Chapters

04 Chapters

29 Chapters

32 Chapters

09 Chapters

08 Chapters

17 Chapters

:

:

:

:

:

:

: Illustra�ve Examples Exercises

Theory Unsolved ProblemsA. B.

Kamlesh Purohit, S.P. Harsha, R.K. Purohit

8. Hydraulic Prime Movers

9. Impulse Turbines

10. Reac�on Turbines

11. Governing of Hydraulic Turbines

12. Performance of Hydraulic Turbines

13. Centrifugal Pumps

24 Chapters

12 Chapters

35 Chapters

16 Chapters

09 Chapters

29 Chapters

:

:

:

:

:

:

Other Related Books


Fluid Mechanics

Kamlesh Purohit, S.P. Harsha and R.K. Purohit

The material in the book has been presented in a very simple but effec�ve language in order to

enable students to master the subject ma� er thoroughly without coming across the hurdle of

highly technical language. Needless to emphasise, this book has been designed as a self learing

capsule. With this aim the material has been organised in a logical order with lots of illustra�ve

examples to enable students to thoroughly master the subject.

1. Basic Concept Rela�ng to Fluids

2. Sta�c Pressure and its Measurement

3. Fluid Sta�cs

4. Buoyancy and Floata�on

5. Rela�ve Mo�ons of Liquids

6. Kinema�cs of Fluid

7. Dynamics of fluid flow

8. Flow through Orifices and Mouth Pieces

9. Flow over Notches and Weirs

ISBN : 978-81-7233-6196;Year : 2017;

Pages: 528; 4650

ISBN : 978-93-8634-7237;Year : 2017;

Pages: 1132; 3250

ISBN : 978-81-7233-8015;Year : 2013;

Pages: 163; 575

ISBN : 978-93-8369-2170;Year : 2017;

Pages: 480; 2450

ISBN : 978-81-7233-7612;Year : 2012;

Pages: 217; 180

:CONTENT

10. Flow through Pipes

11. Laminar Viscous Flow

12. Turbulent flow through Pipes

13. Dimensional Analysis and Simlitude

14. Boundary Layer Theory

15. Flow Over Immersed Bodies

16. Open Channel Flow

17. Two Dimensional Poten�al Flow Theory

18. Compressible Fluid Flow

ISBN : 978-81-7233-1733; Year : 2006;

Pages: 278; ` 225

ISBN 978-81-7233-4871: ; Year : 2007;

Pages: 621; ` 475

Gas DynamicsR.K. PurohitThis book has been designed as a self contained learning capsule. To achieve this goal the

material has been organised in a logical order and the topics have been discussed in a systema�c

way. It is believed, this book mainly meant for the under graduate and post-graduate students,

will cap�vate the interest of the teachers

1. Introduc�on

2. One dimensional compressible flow

3. Variable area flow

4. Diaba�c flow

5. Fanno flow

6. Normal Shock

Table 1. One-Dimensional Isentropic Compressible-flow Func�ons

Table 2. - One dimensional compressible flow func�onsRAYLEIGH LINE

for stagna�on temperature change in the absence of fric�on and area change

Table 3. - One Dimensional compressible flow func�ons forFANNO LINE

Adiaba�c flow at constant area with Fric�on.

Table 4. One Dimensional Normal Shock Func�ons.

:CONTENT


ISBN : 978-81-7233-4857;Year : 2007;

Pages: 208; 160

ISBN : 978-81-7233-1898;Year : 2000;

Pages: 442; 800

Other Related Books

ISBN : 978-81-9268-6080;Year : 2015;

Pages: 250; ` 1450

ISBN : 978-81-7233-6929;Year : 2011;

Pages: 673; ` 450

ISBN : 978-93-83692-42-2;

Year : 2017; Pages: 1065;

Set 5300

Hydraulic Machines

R.K. Purohit

1. Impact of Free Jets

2. Hydraulic Prime Movers

3. Impulse Turbines

4. Reac�on Turbines

5. Governing of Hydraulic Turbines

6. Performance of Hydraulic Turbines

7. Centrifugal Pumps

8. Reciproca�ng Pumps

9. Miscellaneous Hydraulic Machines

:CONTENT


Order Form - Recommend for Library

TITLE

Civil & Mechanical EngineeringAUTHOR PRICE (`)QTY.

Fluid Mechanics - RTU

Design of Steel Structures (Vol.1)

Design of Steel Structures (Vol.2)

Energy Resources & Technology Vol.1

Energy Resources and Technology Vol.2

Engineering Mechanics Lab Manual

Engineering Thermodynamics

Entrepreneurship Development Hand Book (Hindi)

Environmental Engineering and Safety

Antenna and Wave Propaga�on Mathur A.

Atmospheric Pollu�on By Aerosols Sharma V.K.

Basic Sta�s�cs Mohanty P.K.

Biofuels : Poten�al and Challenges Pandey A.K.

Computer for Law Students Jain P.K.

Design of Concrete Structures Gehlot V.

Gehlot V.

Gehlot V.

Kaushika N.D.

Kaushika N.D.

Gupta A.K.

Purohit R.K.

Harkut O.P.

Raut S.

Purohit K.

Fluid Power and Lubrica�on, 2nd Ed. (Hindi)

Fluid Power and Tribology, 3rd Revised Ed.

Founda�on of Mechanical Engineering, 4th Ed.

Gas Dynamics

Geo-Resources

Guide To Concrete Repair

Hydraulics and Hydraulic Machines

Hydrogeology and Environmental Geology of Sonar River Basin

Industrial Management and Entrepreneurship

Introduc�on To Ground Water Tracer

Global Ground Resources and Management

Industrial Pollu�on and Environmental Management

Purohit K.

Agarwal A.

Agarwal A.

Purohit R.K.

Purohit R.K.

Shrivastava K.L.

Paliwal B.S.

USDI

Purohit K.

Jain S.K.

Sharma V.K.

Trivedy, R.K.

Davis S.N.

Remote Sensing: Principles and Applica�on 2nd Ed.

Remote Sensing: Principles and Applica�ons 2nd Ed.

Steam Turbines and Steam Power Plant

Steel, Timber and Masonry Structures (Hindi)

Strength of Materials-Ii

Wastepaper Trade and Recycling In India

Water Harves�ng : A Manual for The Design and Construc�on

of Water Harves�ng Schemes for Plant Produc�on

Water Measurement Manual

Mechanical Engineering

Monograph on Field Permeability Tests In Alluvium and Rock

Opera�ons Research

Remote Sensing for Natural Resources Management & Monitoring

Management and Entrepreneurship (Hindi)

Limit State Design of Steel Structures

Manual of Individual Water Supply Systems

Material Science and Processes

Chandra R.

Chandra R.

Sharma V.K.

Usepa

Purohit R.K.

Purohit R.K.

Shah C.R.

Mohanty P.K.

Gaur M.

Patel A.N.

Patel A.N.

Jaswal R.

Chandra R.

Manwani N.

Beukering P.V.

Critchley W.

Usdi

Fluid Mechanics

Limit State Design of Concrete Structures (Hindi)

A Handbook of Laboratory Solu�ons Gabb M.H.

390

425

590

650

625

300

175

350

200

350

750

360

400

2650

150

130

140

490

225

6950

1450

470

950

80

200

4650

1750

175

750

120

325

105

400

575

60

470

550

425

4150

140

480

125

120

380

520

300

Textbook of Mineral Processing D.V. Subba Rao 290

ISBN : 978-81-7233-4130; Year : 2005;

Pages: 203; ` 160

ISBN : 978-81-7233-5366; Year : 2008;

Pages: 520; ` 470


:CONTENT

:CONTENT

Material Science and Processes is a core subject having close rela�on with all branches of

Engineering. Needless to emphasise, this new book has been designed a self learning capsule.

With this aim in view, the material has been organised in a logical order and line diagrams have

incorporated to enable to students to thoroughly master the subject. The contents of the book

has relevance with the subject prescribed by , Rajasthan University and Ins�tu�on ofJNVU

Engineers as well as to the courses of study prescribed by various universi�es of India.

Material Science and ProcessesR.K. Purohit

1. Introduc�on

2. Mechanism of deforma�on in crystalline materials

3. Engineering Materials

4. Manufacturing Proc-esses

5. Foundry

6. Welding, Brazing and Soldering

Index

The second edi�on of Thermal Engineering (new name Mechanical Engineering) has been

published with the hope that this edi�on too, would be received with the same zeal and

enthusiasm as the first edi�on was privileged to receive earlier. In the new edi�on four chapters on

Manufacturing Processes and chapter on Refrigera�on and Air Condi�oning have been added.

Needless to emphasise, this new edi�on has been designed as a self-learning capsule. With this aim

in view the material has been organised in a logical order and lots of illustra�ve examples have

been incorporated to enable students to thoroughly master the subject. It is believed that this

book, mainly meant for under-graduate students, will cap�vate the a� en�on of senior students as

well as teachers.

1. Basic Concepts Related to Thermodynamics

2. The First Law of Thermodynamics

3. The Second Law of Thermodynamics and Entropy

4. Proper�es of Steam

5. Steam Generators

6. Boiler Moun�ng and Accessories

7. Boilers-Draught and Performance

8. Vapour Power Cycles

9. Steam Engines

10. Gas Power Cycles

11. Internal Combus�on Engines

12. Air Compressors

13. Refrigera�on and Air Condi�oning

14. Manufacturing Process

15. Welding Brazing and Soldering

16. Machine Tools

17. Power Transmission

18. Combus�on And Fuels

Mechanical Engineering

R.K. Purohit

Engineering

civil eng single page - scientific publishers · to verify the law of parallelogram of forces &...

Documents