civil engineering formwork-mk system · pdf fileformwork to the next pouring stage in the...
TRANSCRIPT
Manifold configurations with a standard system
MK SYSTEM
IMPORTANT:
Any safety provisions as directed by the appropriate governing agencies must be observed when using our products.
The pictures in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the purpose of safety, they should not be deemed as definitive.
All instructions regarding safety and operations contained in this document, and the data on stress and loads must be respected. ULMA Construcción’s Technical Department must be consulted any time that field changes alter our equipment installation drawings.
The loads featured in this document, related to the basic parts of the product, are approximate.
Our equipment is designed to work with accessories and parts produced by our company only. Combining such equipment with other brands is not only dangerous without having made all corresponding verifications, it also voids any or all our warranties.
The company reserves the right to introduce any modifications deemed necessary for the technical development of the product.
All rights reserved.
Neither the whole nor any part of this document may be reproduced or transmitted in any form or by any means (electronic or mechanical), including photocopy, recording or any other form of information storage or retrieval system without the permission of ULMA Construcción.
© Copyright by ULMA C y E, S. Coop
56
2027
Product descriptionApplicationsSystem components and accessories ULMA Construcción in the World
MK SYSTEM
4
MK SYSTEM
5
u
u
u
u
u
u
u
u
u
u
MK SYSTEM
6
Applications
MK Structures
All those structure which require high load capacity can be configured by connecting MK walers.
The combination of the MK Structure system with other shoring and traveller systems increases the number of possible solutions:
MK TRUSS
MK FORM CARRIERS
Support structure for ENKOFORM HMK formwork in large span applications. It is easy to adapt to and to reinforce according to the particular building site requirements.
Powerful shoring for special buildings
MK Truss shoring up bridge
Deck flange form carrier in concrete bridge
Construction of upper slab and wings of steel -concrete composite bridge
Deck flange form carrier
Instead of a customised structure for steel-concrete composite bridge decks, the standard solution offered by MK Form Carrier increases the cost-effectiveness of projects.
The forward-moving of the form carrier is easy with the pull or push auxiliary devices recommended by ULMA.
u
u
u
u
MK SYSTEM
7
Example of parapet form carrier
Construction of bridge with balanced cantilevers
Parapet form carrier
Light form carrier which can be moved manually. It is used for applications with lower load-bearing and forward-moving requirements. It only requires a solid base where to rest the guide rail on.
This system is the appropriate for the construction of bridge protection parapets.
CVS Cantilever carriage
The MK System in its configuration of a cantilever form carriage eases the construction of pier segments with balanced cantilevers as well as straight or curved decks of constant or variable section, and bridge arches.
Parapet form carrier in between two bridge decksu u
u u
u
MK SYSTEM
8
Vertical formwork carrier
By fixing the formwork onto this carrier, it eases and simplifies the formwork erection and stripping works and the travel of the formwork to the next pouring stage in the construction of single- or double-sided concrete walls.
Tunnel form carrier
The solution with the MK System for tunnels can be considered another type of form carrier adapted to the particular requirements of tunnel construction. It effectively combines the shoring and the form-giving of the formwork which has to adapt to the vault shape of the tunnel.
Any required geometry is formed with the available standard items
Vertical formwork carrier for single-sided walls
Cut-and-cover tunnel with electric rolling system
Vertical formwork carrier for double-sided wallsu
u
u
u
MK SYSTEM
9
With beams and standard walers, the horizontal formwork ENKOFORM HMK allows adapting to the varied shapes of concrete structures in civil engineering.
With this system, it is possible to form the varied sections of bridge decks, overpasses and underpasses, and any other application that requires high load capacity.
ENKOFORM HMK
ENKOFORM HMK in the construction of a bridge deck
Combination of ENKOFORM HMK and T-60 Shoring
ENKOFORM HMK in pier caps and bridge decksSystem benefits
u Bridge sections, viaducts, overpasses and other, with constant or variable section in width and depth
u Slabs of great thickness
u Underpasses
u Pier caps
u Pier segments
Formwork systems
Typology of works with ENKOFORM HMK:
u
u
u u
The connector design enables perfect adjustment and adaptation to the different sections of:
Bridges of constant or variable section, both solid and hollow
Bridges of variable deck depth, solid or hollow
Bridges with superelevation
Rigid structure for handling and transport.
Fast stripping by modules or formwork units.
Easy jointing of walers and timber beams.
MK SYSTEM
10
ENKOFORM VMK
Wall constructionOn-site assembly of ENKOFORM VMK panels
Columns with ENKOFORM VMKu
u
u
System benefits
It provides excellent finishes capable of suiting the requirements of surface designs predefined by the architect.
Using common standard accessories of other ULMA vertical formwork systems as stabilisers, climbing brackets, anchors, etc.
The Panel Connector ensures the hermetical longitudinal joint between panels. In addition, it conducts a corrective function by absorbing possible deviations occurring during assembly.
The formwork can be optimised according to the defined concrete pressure.
Panels with standard plywood, easy to be replaced, allowing the reuse of panels.
Reduced transport volume if the material is delivered dismantled to the building site.
Panel joints are simple and adjustable. The requirement for filling elements is minimal.
It provides great performance and excellent finishes as vertical formwork in any application of building construction and civil works: walls, columns, abutments and piers.
In accordance to the requirements of each project, it is possible to make customised panels consisting of steel walers, timber beams and phenol faced plywood.
MK SYSTEM
11
Silo solution with ENKOFORM VMK curved formwork on climbing structure
Applications
ENKOFORM VMK offers solutions for numerous vertical concrete geometries:
10
9
3
7
1
5
4
2
6
u
1 Columns
2 Embedded column - 90º wall intersections
3 Corners at 90º
4 Bulkheads
5 Fillers
6 Beam VM20 Connection Plate
7 Working bracket
8 Lifting
9 Stabilisation
10 Curved panels
8
MK SYSTEM
12
With the MK system, it is possible to configure different load support structures in the field of civil engineering.
MK-360 Shoring Tower: MK-150 Shoring Tower: MK Prop :
MK Shoring Systems
Shoring of formwork for viaduct with MK-360 towers anchored to the foundations and with work platforms at the top for formwork erection works
Shoring configurations:
System components
1 Waler MK
2 Jack 360 MK
3 End Joint MK
4 Horizontal Brace MK
5 Diagonal MK
6 Jack Waler MK
7 Bracing Waler MK
8 Working platform
1 Waler MK
2 Jack 150 MK
3 End Joint MK
4 Horizontal Brace MK
5 Diagonal MK
6 Longitudinal Joint MK
1 Waler MK
2 Jack 150 MK
3 End Joint MK
8
3
3
2
7
6
1
4
5
2
3
5
6
1
4
2
3
3
2
1
The module sizes in plan view are of 0.75; 1; 1.5; 2; 2.5 and 3 m, in all their combinations.
u MK-360 Shoring Towers
u MK-150 Shoring Towers
u MK Prop Shoring
u
MK SYSTEM
13
System benefits
Shoring of vehicle passagewayu
Shoring with MK props of prefabricated beams in abutment
u
Working platforms and handrails on top of the toweru
Anchoring of the tower base increases the permissible load capacity.
Different stripping options, at base or head.
Erection of wind bracing systems between towers to provide optimum solutions.
Modular and flexible system capable of providing numerous configurations for shoring.
Possibility to assemble independent towers or entire shoring structures.
Independent jacks give solution to superelevations.
Easy and secure joints between components.
Stripping with hydraulic jack at base and head
Stripping with wedge at base and head
u
u
Stripping with jacks at headu
Connection between components
Anchorage of the base of the towers
u
u
Wide range of safety items such as platforms, handrails and ladders that can be installed at any point of the tower.
MK SYSTEM
14
CONVENTIONAL CLIMBING SYSTEMS
These are formwork support systems which make the construction in stages of high-rise repetitive buildings more cost-effective.
Main platform of climbing system Formwork stripping system
Climbing systems in construction of piers
MK Climbing Brackets
The MK Climbing Brackets consisting of standard MK Walers and specific accessory can be adapted to include solutions for sloping and circular walls.
As the brackets are assembled out of independent walers fastened with bolts, they can also be dismantled for the purpose of saving transport costs.
MK Climbing Systems
Possibility to bridge gaps in the wall.
All climbing brackets incorporate connections for handrails, adjustable push-pull props and other accessory.
Possibility of formwork stripping with roll-back carriages.
Adjustment, positioning and plumbing of formwork is done with levelling jacks and push-pull props.
Climbing bracket anchoring to the wall with cone-and-climbing ring system.
System benefits
u
u
u
Compatible with ULMA formwork, both modular as well as beam-based.
In a single crane movement - entire sets of climbing brackets and formwork panels are moved to the next pouring stage.
Easy adaptation to different geometries: straight, inclined and circular walls.
Availability of working platforms at different levels with protection equipment for front and lateral safety and access ladders between platforms.
MK SYSTEM
15
Climbing Bracket BMK-170
Main features
Climbing Bracket BMK-240
Main features
There are two standard configurations which may be placed at both sides of the wall:
Inclined wall section with BMK Climbing Brackets and horizontal working platforms
u
97 3
6
2
58
5
1
4
1 Climbing Bracket BMK-240
2 Main platform
3 Pouring platform
4 Cone recovery platform
5 Stripping system
6 Push-pull prop
7 Vertical waler
8 Anchorage
9 Formwork
System components
u Application: civil works and non-residential constructionu Platform width: 240 cmu 35 m2 formwork surface per pair of climbing bracketsu Anchorage to wall: DW15 and DW20u 70 cm stripping distance with roll-back carriage, or 5 cm
to 15 cm with tilt-back systemu Climbing bracket can be adapted to inclined wall
solutions
u Application: building construction and civil worksu Platform width: 170 cmu 35 m2 formwork surface per pair of climbing bracketsu Anchorage to wall: DW15 and DW20u 5 cm to 15 cm stripping distance with tilt-back systemu Climbing bracket can be adapted to inclined wall
solutions
MK SYSTEM
16
Adaptable to any size and type of formwork; as only standard and modular material, basically, MK Walers and timber beams are used to configure the platform.
Versatility of the Gravity Pawl Bracket which is compatible with all types of ULMA walers and adjustable to different lengths.
Safe climbing even under the severest weather conditions is ensured with the RKS Rail Climbing system. The system allows formwork panel climbing without the risk of them getting detached from the wall.
RSK RAIL CLIMBING
There are 2 solutions depending on the type of anchoring to the wall:
System benefits
Safe climbing to great heights.
Versatile and easy to configure with MK profiles.
Large and secure platforms.
70 cm formwork stripping distance.
Two climbing options: hydraulic and crane-assisted.
1 Main platform
2 Cone recovery platform
3 Pouring platform
4 Mast
5 Anchorages
6 Roll-back carriage
7 Push-pull prop
8 Formwork
KSP Shaft Platform
The KSP Shaft Platform system is used for the construction of lift shafts and hollow piers. The outside formwork gets supported on ULMA Climbing Brackets.
u System benefits
7
6
1
2
8
5
4
3
System components
u Gravity Pawl Bracket withbox-out
u Folding Bracket with bracket supportProvides good finish of the wall
MK SYSTEM
17
The HWS Hydraulic Windshield system ensures safe working at the perimeter of the slab under construction and the 2 levels underneath. As the RSK Shaft Platform, the HWS screens can be elevated either with crane or automatically with a hydraulic system. Likewise it provides platforms for access and storage.
The use of MK system components allows obtaining different configurations best suited to the particular needs and the building geometry.
HWS system in SyV Tower, Madrid, Spain
Unique geometry with HWS and platforms for material in Four Seasons, Toronto, Canada
Apartment building Stawki, Warsaw, Poland
HWS HYDRAULIC WINDSHIELD
Prevents people or objects from falling down from the slab edge.
Provides protection against the inclemency of the weather.
Avoid negative visual effect due to the height.
Provides a working platform at the slab edge.
Possibility of self-climbing (hydraulic) elevation without the requirement for a crane.
Enables anchoring it to slab or wall.
Adaptable to slab geometry changes.
Possibility of outside platforms for material lifting.
System benefits
u
u
u
MK SYSTEM
18
Anchorage of HWS to slab or wall:
Self-climbing system, hydraulic power unit and cylinders
HWS with variable inclination, adaptable to non-aligned slabs
System components
Pre-climbing stage or installation of protection screen
1 Mast
2 Vertical waler
3 Slab Bracket HWS
4 Head HWS
5 Cone positioning system
6 Cylinder HWS
7 Climbing Head HWS
2
5
7
6
3
4
3
41
Anchoring system to slab Anchoring system to slab edge Anchoring system to wallu
u
u
u
u
u
MK SYSTEM
19
SINGLE-SIDED WALL FORMWORK
PIER CAPBRIDGE SEGMENTS
MK PEDESTRIAN BRIDGE
Other solutions
MK SYSTEM
20
System components
ITEM No.WEIGHT (kg) CÓDIGOWEIGHT (kg)
ProfileMK-120/0.5MK-120/0.625MK-120/0.75MK-120/0.875
6 7.5 9.110.7
1990104199010519901061990107
WalerMK-120/1.125MK-120/1.375MK-120/1.625MK-120/1.875MK-120/2.125MK-120/2.375MK-120/2.625MK-120/3.125MK-120/3.625MK-120/4.125MK-120/4.625MK-120/4.875MK-120/5.625
29.4 35.5 41.9 47.9 54 60 68 81 93107120126146
1990209199021119902131990215199021719902191990221199022519902291990233199023719902391990245
Longitudinal Joint MK 24.2 1990503
MK WALERS AND PROFILES MK CONNECTORS
Axial node M D40 MK Axial node 90º M D40 MK
Axial node M D20 MK Axial node M 2-D20 MK
15
23
1.55.1
1990300
1990301
1990590 1991458
Waler-waler 90ºjoint MK 3.7 1990402
Spacer tube MK-120/52 0.46 1990200
Node-waler 90ºjoint MK
Half-way connector K-120
U main axis MK
U secondary axis MK
U secondary axis end MK
3.6
8.5
3.8
3.8
2.7
1990401
1990501
1990513
1990521
1990421
ITEM No.WEIGHT (kg)
Waler connector MK
Bottom connector MK
Upper connector MK
Swivel adjustable bottom connector
Bottom upper connector MK
Corner connector MK
Orthogonal joint MKMK-180
12.2
9.1
8.5
8.8
8.6
16.5
6.59.1
1990700
1990705
1990715
1960090
P199071
1990890
19903951991200
Universal Head
End joint MK
5.7
24.4
1901795
1990504
Bolt M16x90 DIN-931-8.8Nut M16 DIN-934-8
ProfileMK-180/4.625 MK-180/2.125 MK-180/2.625 MK-180/3.125 MK-180/3.625 MK-180/5.625 MK-180/7.625 MK-180/10.625
0.170.03
96 44.1 55 65 75117159222
02416900241600
1990037 1990017 1990021 1990025 1990029 1990045 1990061 1990085
SPECIAL MK SYSTEM COMPONENTS
MK Shoring / MK Prop Shoring
ITEM No.
MK SYSTEM
21
ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg)
Node 180 MK
Node 180 D40 MK
Node 90 MK
Node 60 M MK
30.6
31.8
18.8
21.4
1990485
1990480
1990390
1990361
Adjustable head MK 34.2 1990594
Bulk head MK 1.4 1990850
ITEM No.WEIGHT (kg)
Ancore profile DU-160/1
Lifting hook H-120
Panel connector MK
Wedge MK
Waler extension MK
Articulated connector MK
Adjustable connectorMK
Lifting bracket E V-100
40.7
12.4
9.5
1.2
11.1
10.4
12.9
10.2
0005003
0263005
1990800
1990801
1990895
1990830
1990810
1960220
ENKOFORM HMK
MK Structures
HWS Hydraulic Windshield System
ENKOFORM VMK
Outside corner head MK
C-VM20 Coupling MK
3
1.8
1990845
1990811
Node 120 MK
Plate node head MK
Node 60 F MK
24
17
16
1990420
1990400
1990360
Plate waler head MK
V Bracing truss
Head joint 74 MK
15.7
19.5
26.1
1990405
1990404
1990374
Mast hinge HWS
Cone positioner HWS-DW15HWS-DW20
Cone-waler connector Cone-waler connector M30
36.3
4.55.3
1.95
2.3
1991205
19912301991220
1901245
1991225
Articulated adj. connector MK 15.7 1990730
Node 360 MK 50 1990665
Node 60 support MK 40.2 1990365
MK SYSTEM
22
ITEM No.WEIGHT (kg)
Climbing bracket BMK-240 1991424
ITEM No.WEIGHT (kg)ITEM No.WEIGHT (kg)
Slap assembly rod HWS
Offset fitting DW15 HWS
Plate 135x135x15 (D25)
Offset bushing joint HWS
2.2
2.1
2.1
0.92
1991175
1991180
1991195
1991120
Bolt M30x80DIN912-10.9 0.75 2320339080
MK climbing brackets
Slap bracket HWS
Bolt M30x220 DIN931-8.8 2.2
1991110
0243029
Self-climbing block HWS 4.1 1991370
41.7
Climbing bracket BMK-170
Tilt-back MK-120
Roll-back carriage
1991417
1991467
1991444
162
12.2
38.5
Platform back support MK-120 19914348.9
Bottom support
Diagonal BMK-170
Waler base connector
Waler screw TR53x6Waler screw bracket TR53x6
Lifting hook MKLifting waler hook
1991487
1991498
0331008
0302020
0302022
19913600331010
2.7
19.7
11.4
10.8
12.2
7.16.0
Head HWS
Slap end bracket HWS
Wall bracket HWS
26.8
16.5
9.3
1991100
1991105
1991115
Cone DW15/M24Cone DW20/M30
1.012
0.471
19010800238050
Wall assembly rod HWS 1991170
Fixed anchor DW15Fixed anchor DW20
0.450.85
02300050238025
Swivel head
Push pull prop head MK-120
Platform support MK-120
1991503
1991439
1991427
6
4.9
7.2
Fixed head 199141014.4
MK SYSTEM
23
ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg)
Adjustable bracket 03060728.7
GP Box- outShort pin 0.35
Bolt M20x100 DIN-931-8.8Bolt M20x150DIN-931-8.8Nut M20 DIN-934-8
GP retrievable box-out
Folding bracket M24
Horizontal diagonal head MK
Push pull prop 1” 0.36-0.52 (D20)
Push pull prop 1.5” 0.44-0.66 (D20)
Push pull prop E 0.51-0.75Push pull prop E 0.75-1.05Push pull prop E 1-1.55Push pull prop E 1.51-2.2Push pull prop E 2.15-2.75Push pull prop E 2.7-3.3Push pull prop E 3.25-4
Screw jack V 27-33Screw jack V 32.5-43Screw jack V 42-53Screw jack V 52-70Screw jack V 69-90Screw jack V 89-110
Push pull prop Push pull prop TR63x6 2.04-2.72 (D32)Push pull propTR63x6 1.52-2.2 (D32)
03060011861033
0242010
02420150242000
0306002
0306020
1990600
0212100
0212125
1960210196010019601101960115196013019601251960410
196013519601401960195196023519602401960245
0333014
19915141.50.6
0.30
0.500.06
6.2
13.5
2.9
2.4
6.19
10.614.118.824.133.438.145.0
7.6 8.6 9.3131516.7
46.5
41.7
Push pull props
Push pull prop heads
Joint push-pull prop E-node MK
Screw jack V TR45 head
Swivel push pull prop head
Head join prop waler
Right angle headFixed head
1990403
1960261
1960120
1960370
19601721960420
1.3
7.9
2.4
2.5
2.22.6
Gravity pawl bracket
Short gravity pawl
0306032
0306054
22
15
Bushing D40 d20 L47
Waler fixing hook
0661505
0333004
0.35
2.3
KSP Shaft Platform
Diagonal MK 0.75x1.5/1396MK 0.75x3/2845
MK 1x1/1110MK 1x1.25/1300MK 1x1.5/1508MK 1x2/1904
MK 1.125x1.75/1797
MK 1.5x1.5/1818MK 1.5x2/2201MK 1.5x2.5/2624MK 1.5x3/3071
MK 2x2/2524MK 2x2.125/2625MK 2x2.5/1x3/2900MK 2x3/3310
19906141990628
1990611199061219906151990620
1991485
1990619199062219906261990630
1990625199148219906291990633
7.719.4
6.1 7.2 8.310.5
12.1
10.112.217.920.9
17.217.619.722.5
Horiz. tube MK 0.75/550MK 1/800MK 1.5/1300MK 2/1800MK 2.5/2800MK 3/2800
199060519906081990613199061819906231990627
1.9 2.7 4.5 6.2 7.915.6
MK HORIZONTAL TUBES, MK DIAGONALS AND PUSH-PULL PROPS
MK Horizontal tubes and MK Diagonals
MK SYSTEM
24
CÓDIGOWEIGHT (kg) CÓDIGOWEIGHT (kg) CÓDIGOWEIGHT (kg)
Half-coupler D48 M20x70
Screwing plate W/coupler
0.9
1.4
0200004
2211168
Double spigot 48
Bracing walerMK 500MK 1/1500MK 1.5/2000MK 2/2500
1.3
48.5109137164
2125312
1990565199056119905621990563
Simple bracing
Wall bracing plate D48x150 1.6
0260505
0260500
3.4
Centring plate MK
Rail shoe
Adjustable abutment head 500
Wheel 100 MK
Driving wheel 100 MK
Rolling beam S-20/6
Rolling beam UPN 100/4
Electrical box
Wheel control pad
Motor cable
23.5
33.4
5949.4
125
119
44.3
12
6
6
1990595
1990406
00010031990655
1990656
0916578
0261519
1990666
1990667
1990668
Electric power cable 6 1990669
Tube 48/0.5Tube 48/1.1Tube 48/1.6Tube 48/2.1Tube 48/2.6Tube 48/3.1Tube 48/3.6Tube 48/4.1Tube 48/5Tube 48/6
2125288212528921252902125291212564721252492125648212525021252510200600
1.8 3.7 5.5 7.0 8.711.412.114.618.020.0
Profile pipe brace connector ATR 03360553
Bracing and D48 tubes
Bracing R-120/1R-120/1.5R-120/2
Right angle coupler 48/48Swivel coupler 48/48
196038519603901960400
21251482125147
13.516.218.8
1.21.3
Jack MK 360
Jack waler MK 0,5/1000MK 1/1500MK 1,5/2000MK 2/2500
40.2
113161207253
1990550
1990530199055119905521990553
Jack MK 150
Jack MK 60
Triangular base trolley 1500 MK
36.1
7.4
34
1990515
1990506
1990645
LEVELLING AND TRANSFER Wheel 15 MK 18.3 1990660
Item no.
ITEM No. ITEM No. ITEM No.
MK SYSTEM
25
ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg)
Hose7m male HWS7m female HWS1m HWS
1.681.961.13
199131119913121991320
ITEM No.WEIGHT (kg)
Cylinder HWS
Handrail support VM
Panel bolt
Toe board 4000x200x50
36
6.9
0.39
16.8
1991350
2211165
1861122
2211225
Climbing head HWS
HoistATR 2TNATR 3TN
13.1
22.334.9
1991300
03360670336068
Assembly platform 21 0005452
PLATFORMS AND LADDERS
Extending platform 1-1.51.5-2.352-2.7
Handrail post 1.5Safety handrail 1.5 woodSafety handrail 1.2 wood
Platform 1.02Platform 1.5Platform 2Platform 2.5Platform 3
12.617.320.6
9.68.17.2
912.41720.222.2
206703520670482067043
221115622111850121000
21277172127716212771521277142127713
Handrail head MK
Handrail socket D50MK/D50
0.82
2.92.4
1990570
01210040335237
Ladder protection 13.1 0333012
Ladder C2.1Ladder C3
19.627.1
03330080333009
Ladder horizontal hook T-500 1.8 0005416
Ladder fixer 1.6 0333010
Ladder hanger 1.6 0333011
Ladder hatch 11.3 0333013
Bolt M24x60 DIN-933-8.8Washer A24 DIN-125Nut M24 DIN-934-8.8
0.30.030.11
024246002424010242400
Joint clamp 16/70 1.8 0260006
Wedge jack50 TN100 TN
2853
02620500262051
Hydraulic jack 30 TNmanual MG-20TN
13.720
19906540263507
HYDRAULIC SYSTEM AND PULLEYS
Hydraulic power unit HWS 185 1991310
Elongation support 3550
32.939.5
00010040001006
Handrail socket 0-20º 3.7 1960505
Item no.
MK SYSTEM
26
ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg) ITEM No.WEIGHT (kg)
Pin E20x70Pin C/HEAD D20x100Cotter R/5
Pin C/HEAD D32x135Pin C 32x200 6.8
Fixed anchor DW20
Base plate D20
0.280.290.03
0.971.4
0.97
2.2
025207003351530250000
03352260253220
0238025
1905047
Wing nut DW15 0.33 0230000
Wing nut 20
Hexagonal coupler DW-26
0.37
1.4
1905046
1907133
Toolkit case
Waler-VM20 clamp 2T
Waler-VM20 angular clamp
Top wind bracing head
Pin D50x75
Saffety pin D 8x60
Bottom wind bracing head
Bottom wind bracing head
Beam VM 20/1.45Beam VM 20/1.9Beam VM 20/2.15Beam VM 20/2.45Beam VM 20/2.65Beam VM 20/2.9Beam VM 20/3.3Beam VM 20/3.6Beam VM 20/3.9Beam VM 20/4.5Beam VM 20/4. 9Beam VM 20/5.9
2.3
0.81
1.3
23.4
1.9
0.05
254
24.6
7.3 9.510.812.313.314.516.51819.522.524.529.5
1960450
1960375
1960345
1990598
1990411
9023108
1990599
1990500
194019119401721940197195012919401961940144195013019401461950112194017819501131940149
BEAM VM
Wind bracing plate 12 1990560
Nut DW 26.5 0.7 0231000
Wind tie rod end DW-26
Tie rod bypass
4.7
3.3
1990690
1990695
Open plate 150x150x15 (D22)
Plate washer nut 15
Plate washer nut 20
2.4
1.4
1.2
0261005
1900256
1905160
Plate100x100x15 (D22)135x135x15 (D25)150x150x15 (D22)150x150x15 (D30)
1.22.12.72.7
0261000199119502610011261004
Plate nut 15 0.73 7238000
Hexagonal nut 15 72380010.22
Tie rod 15/0.11Tie rod 15/0.16Tie rod 15/0.2Tie rod 15/0.26Tie rod 15/0.28Tie rod 15/0.4Tie rod 15/0.5Tie rod 15/1Tie rod 15/1.5Tie rod 20/0.15Tie rod 20/0.2Tie rod 20/0.25Tie rod 20/0.33Tie rod 20/0.5Tie rod 20/1Tie rod 20/1.5Tie rod 26/1.15Tie rod 26.5/6
0.158 0.229 0.29 0.38 0.41 0.68 0.85 1.7 3.3 0.37 0.55 0.66 0.879 1.332 2.64 3.8 5.426.9
023011102301160230020023002602300280230040023005002301000230150023401502340200234025023403302340500234100023415019071310231600
PLATES, ANCHORS AND TIE RODS
MK SYSTEM
27
u USA
ULMA Form Works, Inc.HAWTHORNE - New Jerseywww.ulma-c.us
West Branch (Phoenix)GILBERT - Arizona
Mid-Atlantic Branch (Baltimore)JESSUP - Maryland
u Mexico
ULMA Cimbras y Andamios de México S.A. de C.V.TLALNEPANTLA(Mexico State)www.ulma-c.com.mx
u Peru
ULMA Encofrados Perú, S.A.LIMAwww.ulma-c.com.pe
North BranchCHICLAYO - Lambayeque
ASIA-AFRICA
u P.R. China
ULMA Formworks China R.O.SHANGHAIwww.ulma-c.cn
u UAE
ULMA Formworks UAE L.L.C.DUBAIwww.ulma-c.ae
u India
ULMA FORMWORK SYSTEMS INDIA PVT. LTD.GURGAON - Haryanawww.ulma-c.in
Mumbai BranchMumbai - Maharashtra
u Kazakhstan
ULMA Formwork Kazakhstan Ltd.ASTANAwww.ulma-c.kz
u Singapore
ULMA Formwork Singapore PTE. LTD.SINGAPOREwww.ulma-c.sg
u Slovac Republic
ULMA Construccion SK, s.r.o.BRATISLAVAwww.ulma-c.sk
u Romania
ULMA Cofraje s.r.l.BUCHARESTwww.ulma-c.ro
u Ukranie
ULMA Formwork Ukraine Ltd.KIEVwww.ulma-c.com
Dniepropetrowsk Branch DNIEPROPETROWSK
Odessa BranchODESSA
AMERICA
u Argentina
ULMA Andamios y Encofrados Argentina, S.A.FEDERAL CAPITALwww.ulma-c.com.ar
u Brazil
ULMA Brasil - Fôrmas e Escoramentos Ltda.ITAPEVI - SPwww.ulma-c.com.br
Rio de Janeiro BranchANIL - Rio de Janeiro - RJ
Brasilia BranchGUARÁ - Brasília DF
Bahia BranchCIA SUL - Simões Filho
South BranchNAVEGANTES - Porto Alegre RS
Minas Gerais BranchFUNCIONARIOS - Belo Horizonte
u Canada
ULMA Construction Systems Canada Inc.BOLTON - Ontariowww.ulma-c.ca
u Chile
ULMA Chile - Andamios y Moldajes, S.A.SANTIAGOwww.ulma-c.cl
North BranchANTOFAGASTA
South BranchCONCEPCIÓN
uItaly
ALPI, S.P.A.MONGUELFO (BZ)www.alpionline.net
u Poland
ULMA Construccion Polska S.A.WARSAWwww.ulma-c.pl
EAST REGION
Warsaw BranchWARSAW Olsztyn Branch OLSZTYN Łódź Branch ŁÓDŹ
POZNAŃ BRANCH
Poznań officePOZNAŃ Bydgoszcz pffice BYDGOSZCZ
GDAŃSK BRANCH
Gdańsk office GDAŃSK Szczecin office SZCZECIN
WROCŁAW BRANCH
Wrocław officeWROCŁAW Nowa Sól office NOWA SÓL
SOUTH REGION
Katowice BranchJAWORZNO Cracow BranchCRACOW Lublin Branch LUBLIN
SCAFFOLDINGS BRANCH
Warsaw officeWarsawPłock officePŁOCK
u Portugal
ULMA Portugal Lda.SÃO JOÃO DA TALHA - Lisbonwww.ulma-c.pt
Oporto BranchVILA NOVA DE GAIA - Oporto
u Czech Republic
ULMA Construcción CZ, s.r.o.BENÁTKY NAD JIZEROUwww.ulma-c.cz
EUROPE
u Spain
ULMA C y E, S. Coop.www.ulma-c.es
Canary Islands BranchGÜIMAR (Tenerife) INGENIO (Las Palmas)
Centre BranchAJOFRÍN (Toledo)
East BranchPOLINYA (Barcelona) LLUCMAJOR (Baleares)
North BranchLEGUTIANO (Araba)
West BranchCAMBRE (A Coruña)
South BranchPELIGROS (Granada)
u Germany
ULMA Betonschalungenund Gerüste GmbHRÖDERMARKwww.ulma-c.de
Northwest BranchNEUSS
Southwest BranchGÖPPINGEN
East BranchARNSTADT
u France
ULMA, S.A.R.L.BONDOUFLEwww.ulma-c.fr
Paris Region BranchBONDOUFLE
Eguilles BranchEGUILLES
Lille BranchLA CHAPELLE D’ARMENTIÈRES
Pau / Lons BranchLONS
Tarnos BranchTARNOS
PRODUCTION PLANT AND HEADQUARTERS
ULMA C y E, S. Coop.
Ps. Otadui, 3 – P.O. Box 13 20560 OÑATI (Gipuzkoa)SPAINPhone: +34 943 034 900Fax: +34 943 034 920
ULMA Construcción around the worldwww.ulma-c.com
01FI
N05
SPAINPhone: +34 943 034900Fax: +34 943 034920www.ulma-c.com