Since 2001 Clarinox Technologies has worked towards the facilitation of more efficient embedded development. The company has developed a range of technologies by following international standards such as those published by the Bluetooth SIG and IEEE802.11 specifications.

Clarinox has developed middleware, software tools and protocol stacks. Using these proven resources, engineers can efficiently design, implement and debug complex embedded wireless products or systems.

Clarinox has access to cutting-edge research from our close ties with top universities, and participates in the partner programs of ARM, Express Logic, Green Hills Software, IAR, Intel, Mentor Graphics, NXP, STMicroelectronics, Texas Instruments and Wind River.

Clarinox has a solid portfolio of loyal clients spread across various industry sectors.

Clarinox was founded with the vision of

providing the tools and expertise to help reduce

the technical risks for companies designing wireless electronics.

Arduino-Connector • Koala Joeyduino Wireless Module interface • UART Bluetooth interface• SPI/SDIO Wi-Fi interface• I2C interface

Power Supply • USB or external 5V supply

Supported Development Toolchains IAR Embedded Workbench®, ARM® Keil® MDK, Mentor Graphics® Sourcery™ CodeBench

Supported OS/RTOS embOS, FreeRTOS™, Nucleus® RTOS, ThreadX®, uC/OS-III®

Temperature Rating • -40°C to 85°C

Display • 4.3”480 x 272 RGB (CTP) Capacitive touch screen • I2C touch screen interface

Camera • 1 / 2 M, 8-bit parallel interface • Continuous capture at up to 20 FPS • Optimal for OV9655 cameras

Features • Replaceable MCU for varying embedded development

needs • Supports a range of wireless modules for Wi-Fi,

Bluetooth and Bluetooth LE application development • Combine with Clarinox wireless stacks and APIs for fast

development

Technical Specifications Koala EVM• 4 MB Flash Memory • 64 MB SDRAM

USB • Onboard J-Link JTAG programming • Micro USB-OTG FS device and host roles • Mini USB UART bridge for debugging

Other• Ethernet 10/100Mbit Ethernet (RJ-45 connector) • Micro-SD card connection with 4bit SDIO

Koala EVM Board (112mm x 152mm)

head officeSuite 28/296 Bay RoadCheltenham, VIC, 3192Australia

postal addressPO Box 222Sandringham, VIC, 3191Australia

telephone+61 3 9095 8088

2 Koala Carrier Joeyduino

Features• H/W interface for Koala® EVM Blue and Sensor Board• Onboard 128MB Flash memory• Onboard temperature sensor• 3.3V-5V external power supply• Micro USB connection• Test points for JTAG, UART, USB, SPI Joey signals

Supported toolchains• IAR EWARM• Keil MDK-ARM• GCC/Eclipse

3 Koala Carrier WMI

Features• H/W interface for Koala® EVM Green • Onboard 128MB Flash memory• Onboard temperature sensor• 3.3V-5V external power supply• Micro USB connection• Test points for JTAG, UART, USB, SPI signals

Supported toolchains• IAR EWARM• Keil MDK-ARM• GCC/Eclipse

5 Koala Connect BT/BLE & WiFi

FeaturesFully functional BT + Wi-Fi small form factor, low power gateway. Use directly with final design or prototype with the Clarinox carrier boards.

MCU STM32F412

Wi-Fi Radio TI WL1831MOD / WL1837MOD• 802.11 a/b/g/n• 2.4 GHz & 5 GHz• STA, AP & Wi-Fi Direct Mode• I/O Signals: ADC, GPIO, I2C, I2S, SPI, UART, USB

Bluetooth / Bluetooth LE RadioTI WL1831MOD / WL1837MOD / CC2564B• Dual-mode Bluetooth & Bluetooth Low Energy• Bluetooth v4.1 Compliance and CSA2 Support

6 Koala Connect BT/BLE

FeaturesUse directly with final design or prototype with the Clarinox carrier boards.

MCU STM32F411

Bluetooth / Bluetooth LE Radio CC2564B• Dual-mode Bluetooth & Bluetooth Low Energy• Bluetooth v4.1 Compliance and CSA2 Support• I/O Signals: ADC, GPIO, I2C, I2S, SPI, UART, USB

Applications• Internet of Things (IoT): Consumer Electronics, Home

Appliances, Wearables• Industrial IoT: Industrial Automation

1 Koala EVM Joeyduino Wireless Module

Features • Enables simultaneous bluetooth and wifi technologies • Arduino compatible pinout• Wifi &bluetooth antenna coexistence • Combine with Clarinox wireless stacks and APIs to

reduce design / development headaches Wi-Fi Radio TI WL1831MOD• 802.11 b/g/n • 2.4 GHz • STA, AP & Wi-Fi Direct Mode • 4-Bit SDIO or SPI Host Interface Support

Bluetooth / Bluetooth LE Radio TI WL1831MOD • Dual-mode Bluetooth & Bluetooth LE • Bluetooth v4.1 compliance and CSA2 support • Host Controller Interface (HCI) Transport for Bluetooth

Over UART

Compatible Boards Koala EVM, EK-TM4C1294XL, Infineon XMC4700 Intel Galileo / Edison, STM32F7 / STM32F4 Discovery / Nucleo, Renesas Synergy SK-S7G2

Industrial Temperature Grade • -40C to +85C Supported Technologies Wi-Fi WLAN, Wi-Fi Direct Concurrent Operation (Multichannel, Multirole), Bluetooth, Bluetooth LE

1 2 3 4 5 6

4 Koala EVM NXP MCU Board

Features• 512Mbit External SDRAM with 133MHz• 32Mbit External Flash Memory interfaced with Quad SPI

MCUNXP LPC4350 • ARM Cortex M4 processor running up to 204MHz with

JTAG and built-in NVIC• ARM Cortex M0 Co-Processor• Upto 264KB of SRAM• Quad SPI flash, Ethernet MAC with RMII and MII, USB

OTG HS, four UARTs with DMA support, two CAN busses, SPI, I2C interfaces

• External Memory Controller(EMC), LCD Controller with DMA support, SD/MMC card interface and upto 164 GPIO pins with pull-up/down resistors

Supported tool-chains• IAR EWARM• Keil MDK-ARM• GCC/Eclipse