Cleanroom Partition Walls

Nicomac pharmaceutical cleanroom walls are a composite construction of two skins of high pressure plastic laminate over an aluminum framework with a sealed and insulated interior. Standard modular clean room panel dimensions are 1250 mm (4') wide with an overall length ranging from 3 to 4,2 mt (10’ to 14’). Standard panels have an overall thickness of 45 mm (1 3/4"). The assembly is self-supporting. Additional wall heights can be achieved by using a stacking technique. The self-supporting, insulated walls are assembled with an interior aluminum framework. The panel seams are sealed by silicone with a perfectly flush finishing. (UPVC welded seams are also available). Insulation materials are sandwiched between the two skin layers and sealed from the exterior by the aluminum framework. There is a selection list of materials for insulation and wall skins according different needs in cleanroom construction. The Nicomac unique standard wall skin is an anti-scratch high-pressure laminate (impregnated with a special phenolic resin to be fire resistant). The high-pressure laminate can be easily milled to allow flush mounting of all covings and accessories and guarantees compliance with cGMP rules for room cleaning. The wall system is flexible thus allowing easy cleanroom installation and accepts changes to design in the field and can be reconfigured for use in other locations. Upvc coated and metal powder coated metal panels are also available.

With Nicomac wall system you can achieve:

• CGMP certified cleanroom design

• Full compatibility with chemicals used for cleaning and sanitizing

• Installed in all major pharmaceutical companies

• Easy clean room installation

• State-of-the-art cleanroom technology

• Flush surfaces everywhere!

• Antiscratch materials

• Easy to modify during wall installation

• Wall system suitable for ISO 5 (Class 100) to ISO 8 (Class 100,000)

cleanrooms

Cleanroom Doors

Nicomac cleanroom doors can be configured as

single/double swing-out or as horizontal sliding either manual, automatic or semiautomatic. Nicomac Pharmaceutical door panels are assembled with the same panels of the wall system. Swing out doors are designed to fit flush with both sides of the wall panel system and are supplied in several dimensions. The internal framework is constructed of welded extruded aluminum profiles. The external frames are manufactured with rounded anodized or epoxy coated aluminum profiles with air tight dual gaskets. All fasteners for the hinges and latches can be recessed into the door frame. Standard hinges allow doors to swing 180° degrees from full open to full closed position.

Nicomac pharmaceutical clean room doors are available also with interfacing profile for a flush and easy installation on existing walls.

• Fully flush surfaces with wall system • A large variety of swing out pharmaceutical doors • Manual, semiautomatic and fully automatic sliding doors • Door hardware by world market leading manufacturers • Custom dimensions available • PLC controlled interlocking system for GMP compliance. • Heavy-duty structure for high durability • Full compatibility with chemicals used for cleaning and sanitizing

Modular Swing Doors

(Click image to enlarge)

Swing out automatic door

(Click image to enlarge)

Double swing out doors

(Click image to enlarge)

Detail sliding door

(Click image to enlarge)

Sliding door ( inside)

(Click image to enlarge)

Sliding door

(Click image to enlarge)

Modular door

(Click image to enlarge)

Modular door

(Click image to enlarge)

Door and internal coving

(Click image to enlarge)

Roll up and single swing out

door

(Click image to enlarge)

Modular Pharmaceutical Cleanrooms

Nicomac is the answer to your design and build Pharmaceutical cleanroom project needs. Our modular clean rooms using the unique Hipharma design are suitable for non-certified and certified (IS0 5 and ISO 8) pharmaceutical areas. For manufacturing requirements we provide complete project management including design, construction, support, and installation.

Our hard wall clean room system combines the need for a flexible solution with the request for durability and flush surfaces.

Please send us your clean room layout. We will be glad to work with you to provide a highly competitive proposal. Click HERE to get a quotation:

• Design/build cleanroom projects

• Cleanroom construction

• Cleanroom installation

• Clean room installed and validated in all major pharmaceutical

companies world wide

• Our clean room specialist will guide you throughout your project to

ensure final success

• FDA-GMP consulting available for your clean room design

• 40 years of experience in the pharmaceutical industry

Please send us your clean room layout. We will be glad to work with you to provide a highly competitive proposal.

Modular Electronic and Semiconductor Cleanrooms

Nicomac is the answer to your design and build cleanroom project for the Semiconductor and Electronic industry. Our modular cleanrooms, using the unique Hipharma design, are suitable for areas from Class 0 to Class 100,000 (IS0 1 through ISO 8 cleanrooms)

For your manufacturing requirements we provide complete design, construction support, and installation.

Our systems can meet the requirements of Nano technology certification.

Our hard wall modular clean rooms system combines the need for a flexible solution with the request for durability and flush surfaces.

• Design/build cleanroom projects

• Cleanroom construction & installation

• Cleanroom installed and validated in all major pharmaceutical &

semiconductor companies world wide

• Our specialist will guide you throughout your project

• Consulti

ng available for your design

• 20 years of experience in the cleanroom industry

Please send us your clean room layout. We will be glad to work with you to provide a highly competitive proposal. Click HERE to get a quotation.

Clean Room Ceilings Walk On & Standard Suspended False Ceilings

Nicomac T grid type Our unique T-grid walks on clean room suspended ceilings consist of a load-bearing structure made of aluminum suitable to support ceiling panels, lights and filter units. The T-grid is supported by threaded tension bars with adjustable turnbuckles that are fastened to the overhead support at 4 intervals. There is a selection of two standard panel sizes: 2' x 2' (605 x 605 mm) or 2' x 4' (605 x 1210 mm).

Tiles for our clean room ceilings can be designed to be flush to the grid. Depending on the type of tile used the entire ceiling system can be certified as walk on (single load of 160 Kg (352 Lb) in a square meter of false ceiling and situated in the most unfavorable static position).

Our pharmaceutical T grid false ceilings can be used when ceiling maintenance is provided for the room

and walk on ceilings are not necessary. Dedicated less expensive pharmaceutical grade tiles are used in this case.

(Click image to enlarge) (Click image to enlarge) (Click image to enlarge) (Click image to enlarge)

Advantages of Nicomac unique walk on T grid system

• T grid system requires not cut outs for filters and light fixtures

• Flexibility while positioning filters and light fixtures

• Flush to the grid walk on system!

1250 mm x 3000 mm (4' x 10') false ceilingThis is a hermetic false suspended ceiling. Flexible and easy to assemble, it can be installed before or after wall location. This kind of false ceiling is made by means of polystyrene or polyurethane panels sandwiched between two layers of aluminum plates. Both sides are pre-painted with epoxy powder coating. All sides are closed by aluminum frame. The result is a perfectly smooth and coplanar surface that is very easy to clean. The bearing aluminum profile is housed by clicking-in between panels. There is a threaded tension bar, with an adjustment ring, to be fastened to the existing ceiling.

Filter, light and other filter accessories can be accessed from the top of the clean room ceiling. Holes for filters, light and utilities are prepared at our site with HI tech Numeric Control Pantograph.

Cleanroom Windows

All window units for the Nicomac

modular cleanroom system are double glazed, and fit flush with both surfaces of the wall panel system (45mm). Each unit is constructed of two panels of 3+3 mm double layered and laminated safety glass. Each panel includes a layer of PVB (polyvinyl butyral) film laminated between two layers of glass. The two panels sit within a structured framework, and air fills the space between the two panels.

The window system is especially designed for the cleaning needs of the pharmaceutical cleanroom. It is completely silicone sealed, and includes a micro-perforation profile with an integral silica gel moisture absorption system, designed to eliminate fogging. Rounded corners add to the strength of the cleanroom window unit and enhance their appearance.

Tempered glass (6mm) in place of the laminated glass is available upon request.

Nicomac windows can be installed in existing clean rooms.

• Fully flush to the wall

• Unique rounded corners available

• Double glass and safety film

• Full glass panels available

(Click image to enlarge) (Click image to enlarge) (Click image to enlarge) (Click image to enlarge)

Dispensing Units & Down Flow Booths

PHD line of Nicomac products for turn-key granulation includes a wide range of dispensing units. The equipment can be designed

addressing HI containment requirements using isolation technology or glove box or, for standard dispensing using down flow booths, for both decontamination or operator protection during weighing operation. Major characteristics of Nicomac down cross unit: (down flow booth)

References from the Far East

Amol Pharmaceuticals India

Apotex India Ltd., India

Bharat Biotech Ltd., India

Dabur India Ltd., India

Dr.Reddy's Laboratories Ltd, India

Emcure Biotech / Emcure Pharmaceuticals Ltd., India

Enaleni Pharma South Africa

Gennova Biopharmaceuticals India

Granules India Ltd India

Hetero Drugs Ltd., India.

Indus Pharma Pakistan

Lupin Natco Pharma Ltd., India

Nicholas Piramal Ltd., India

Orchid Chemicals & Pharmaceuticals Ltd., India

Panacea Biotec Ranbaxy Laboratories Ltd., India

Reliance Life Sciences / Reliance Biotech Ltd., India

Sandoz India Pvt.Ltd., India

Strides Arcolab Vasudha Pharma & chemicals Ltd, India

Zydus Cadilla Ltd., India

Zydus Cadilla Ltd.,

India

• Unidirectional vertical laminar flow Class ISO5 (Class100 according

to FS 209 E)

• Stainless steel AISI 304 structure

• Dynamic gasket to guarantee the perfect sealing of the filters

• Down cross is equipped with N°3 fans with AC frequency control

• Inlet air:

• Prefilter Eu3 and HEPA filter EU14 on inlet and outlet air.

• Stainless steel power control IP55 or NEMA 4

• Cooling coil

• Magnelic for differential pressure control

• Digital display for air velocity- air flow- Alarm ΔP for filters

• Digital thermoregulator

• Drop light fixture IP40 500 lux

• Antistatic PVC curtains

Nicomac down cross dispensing unit for pharmaceutical solid dosage process can be integrated with bar code reading units and with table scale from 0 to 6 Kg. (Weighed field of 1200/6100 g accuracy) or industrial scales for weighing system of IBC’s or drums.

• High quality of finishing for pharmaceutical execution for cGMP

compliance

• Competitive price

• Hi containment – isolation technology – material transfer design

available

• Network of worldwide representative for excellent after sales service

and fast trouble shooting

• IQ and OQ documentation according cGMP rules

• Customized solutions

Top of Form

Bottom of Form

Cleanroom AccessoriesWe offer a wide range of cleanroom accessories loke laminar airflow unit, fume hoods, air handling units, RLAF unit, pass boxes, garment cubicle, ceiling panels, modular cleanroom wall panels and door systems.

Share:

Laminar Airflow UnitDepending on the type of process and size of the connecting process equipment, we offer Laminar Airflow Units. Our clients can avail these airflow units for the application of filling, sealing, capping areas and also for flame proof areas. This product is available in SS 304 make. The range is offered optional accessories like VFD, velocity sensors, digital DP alarms and vinyl curtains. We are offering the following variants of LAF:

• Ceiling suspended laminar airflow unit

• Vertical laminar air flow unit

• Horizontal laminar air flow unit

Request for Details & Quotation

Fume Hoods Our clients can avail Fume Hoods that is widely demanded by various laboratories and research centers. The interiors of the cabinet can be illuminated with fluorescent lamps for ease of operations. Available with chemical resistant cladded base cabinet with adjustable shelf, the fume hoods are offered with SS / FRP coated aero foils. We offer the following varieties of fume hood units:

• Bench mounted type

• Low bench type for distillation

• Walk-in hood

• Units with auxiliary chambers

Cleanroom Accessories Laminar Airflow Unit Fume Hoods Air Handling Units RLAF Unit Pass Boxes Garment Cubicle Ceiling Panels Modular Cleanroom Wall Panels Door Systems

Laboratory Furniture

Storage Cabinets

Turnkey Solutions

Showcase

View all our products / services as a slide show.

Play Now

Contact us

Mr. P. Srikanth303, Surabhi Lotus, Nagarjuna Nagar Colony, AmeerpetHyderabad, Andhra Pradesh - 500 037, India Telephone: +(91)-(40)-32913478

http://call.indiama

Integrated Cleanroom Technologies Limited, All Rights Reserved. (Terms of Use)Developed and Managed by IndiaMART InterMESH Limited

Top of Form

Quick SearchSearch Prod

Bottom of Form

Home Profile What We Offer Contact Us Enquiry

Clean Room Process Monitor

Clean Room Process Monitor (Temp,RH,DP)

1.DescriptionThe STYRAX “Clean Room Process Monitor” has been specially developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. The Process Monitor can measure Relative Humidity, Temperature and Differential Pressure through inbuilt sensors. It has on demand dew point display. The Monitor has status LEDs for process violation indication. Humidity, Temperature and pressure will

What We Offer

Door Interlocking Systems

Pass Box Controllers

Air Shower Controller

LAF/BUF Controller

Access Control Device

Electro Magnetic LocksClean Room Process Monitor

Clean Room Process Monitor (Temp,RH,DP)Clean Room Process Monitor

Differential Pressure Indicator

Showcase

View all our products / services as a slide show.

Play now

display individually and data transfers to any master device on modbus serial communication. It also has communication diagnosis LED. The monitor has inbuilt buzzer for audible process violation. It has keypad to programming the instrument by user. It has Stainless steel Modular Face plate, which is designed as a mounting accessory for monitor suited for Modular wall Clean Room applications where you need flush mounting mechanism. This instrument enables you to measure humidity, temperature and differential pressure in the following fields:· HVAC (Heating, ventilation, Air conditioning, cooling)· Pharmacy industry.· Blood stations, pharmacies.· Horticultural and

cultivation of plants. Features and Specifications Features:

• Advanced Microcontroller based inbuilt RH, Temperature & DP measurement.

• Software programmable channel ranges and unit.

• Programmable resolution.

• 4 Digit, 0.39” bright LED display for displaying DP, RH & Temperature.

• Process parameter status indication with 3 LEDs.

• User

selectable set limits for process value violation.

• Inbuilt buzzer to audible process value violation.

• Password protection for calibration and programming mode.

• Software Calibration for 3 channels.

• MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.

• Programmable baud rate.

• Diagnosis of Communication with master.

• Remote program

mable from master device.

• User programmable offset correction.

• Brick and modular wall mounting.

• Stainless

steel enclosure.

Send Business Enquiry

Clean Room Process Monitor

The STYRAX “Clean Room Process Monitor” has been specially developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. The Process Monitor can measure Relative Humidity, Temperature and Differential Pressure through inbuilt sensors. It has on demand dew point display. The Monitor has status LEDs for process violation indication. Humidity, Temperature and pressure will display individually and data transfers to any master device on modbus serial communication. It also has communication diagnosis LED. The monitor has inbuilt buzzer for audible process violation. It has keypad to programming the instrument by user. It has Stainless steel Modular Face plate, which is

designed as a mounting accessory for monitor suited for Modular wall Clean Room applications where you need flush mounting mechanism. This instrument enables you to measure humidity, temperature and differential pressure in the following fields:

• HVAC (Heating, ventilation, Air conditioning, cooling)

• Pharmacy industry.

• Blood stations, pharmacies.

• Horticultu

ral and cultivation of plants.

<!-- @page { size: 8.5in 11in; margin: 0.79in } P { margin-bottom: 0.08in } -->

Features and Specifications

Features:• Advanced

Microcontroller based inbuilt RH, Temperature & DP measurement.

• Software programmable channel ranges and unit.

• Programmable resolution.

• 4 Digit, 0.39” bright LED display for displaying DP, RH & Temperature.

• Process parameter status indication with 3 LEDs.

• User selectable set limits for process value violation.

• Inbuilt buzzer to

audible process value violation.

• Password protection for calibration and programming mode.

• Software Calibration for 3 channels.

• MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.

• Programmable baud rate.

• Diagnosis of Communication with master.

• Remote programmable from master device.

• User programmable offset

correction.

• Brick and modular wall mounting.

• Stainless steel enclosure.

Send Business Enquiry

Loading...

Contact us

Mr. Ram BandiNo. 48- 51, Doolapally, Phase V Extension, IDA, JeedimetlaHyderabad, Andhra Pradesh - 500 055, India Telephone: +(91)-(40)-23093314/ 23093315

http://call.indiama

Home | Profile | What We Offer | Trade Offers | Contact Us | Enquiry© Styrax Instruments India Private Limited. All Rights

Dyna Filters Private LimitedPune, Maharashtra

Year of

Establishment:

1982

IndiaMART

Member

Since: 2009

Products [18]

Phone: +(91)-

(20)-

26872772

HOME ABOUT USPRODUCTS & SERVICES

CONTACT US SEND ENQUIRY

Products &

Services

• Air

Curtain

• Air

Showe

r

Products

Air Curtain

• Biologi

cal

Safety

Cabine

ts

• Clean

Room

Modula

r

Partitio

n

Ceiling

Panels

• Dynam

ic Pass

Box

• Fan

Unit

Filter

• Fine

Air

Filters

• Garme

nt

Storag

e

Cabine

ts

• Hepa &

Ulpa

Cells

Filters

• Hepa

Air

Filters

• Lamina

r Air

Flow

Work

Station

s

• Miniple

at

Hepa

Filters

• Pocket

& Bag

dyna air curtains are designed for installation in shops, office buildings, hotels,

restaurants and clean room doorway. They discharge a curtain of air, which effectively shut out

outside air. Use them to keep out insects, unpleasant smell, and dust from indoor where a large

number of people pass in and out.

these air curtains also prevent air escaping from an air-conditioned room.

features: -

• low noise level & will not exceed 65 decibels.

• extremely high airflow and air quantity.

• adjustable vanes at outlet nozzles direct airflow where most needed.

• available for domestic as well industrial purpo

Send Enquiry

Air Shower

Type

Air

Filter

• Pre Air

Filter

• Revers

e

Lamina

r Air

Flow

Workst

ations

• Static

Pass

Box

• Sterilizi

ng

Tunnel

• Panel

(Clean

Room

Equip

ment )

dyna air shower acts as a barrier between two areas of a facility therefore helping to

prevent personnel spreading contaminants. Protection is provided both upon entering and leaving

sensitive or contaminated areas without need for clothing changes.

features:

• maximum protection- ensures that personnel and environment avoid cross contamination

• minipleat hepa filter of efficiency 99. 999% for supply

• can be modularly supplemented

• low noise level

• extremely high airflow and air quantity

• 100% recirculation

Send Enquiry

Biological Safety Cabinets

dyna filters pvt. Ltd. Offers a wide range of laminar airflow biological safety cabinets

conforming to current iso/tc, nsf/cdc/nih standards and guidelines. Employing contemporary

technologies in micro contamination control, these systems effectively provide both bioexclusion

and biocontainment. Here we describe the design that is in common use in the country. However,

we do undertake manufacture of other categories against specific orders, including special design

innovations for safe exhaust and safe removal of contaminated filters.

features: -

• low noise level & will not exceed 65 decibels.

• counterweight balance/ motorized, sliding doors with glass.

• minipleat hepa filter of efficiency 99. 999% for supply and exhaust.

• magnehelic gauge for pressure differential.

• fluorescent light.

• uv light along with hour meter

• pu caster wheels for easy movement.

• leg levelers in ss304.

• ss work table with peripheral perforations

Send Enquiry

Clean Room Modular Partition Ceiling Panels

Clean Room

A Room in which concentration of air born Particles are controls. With controlling Physical

Properties (Temperature, Humidity & Pressure).

(Clean room panels are also called as sandwich Panels.)

Requirement Of Clean Room Panels

1. To minimize

○ Introduction

○ Generation

○ Retention

Of contaminated particles inside the room.

2. Controls on physical properties required for specified products.

○ Temperature

○ Humidity

○ Pressure

3. Controls on contamination & cross contamination.

Send Enquiry

Dynamic Pass Box

dyna pass boxes (dynamic / static) avoids cross contamination and also minimize

the entry of contaminants into the clean room along with the product protection while transferring

the material from one classified area to anothe

features:

• fluorescent light

• uv light along with hour meter

• pencil coved internal corners

• mechanical / electromagnetic door interlocking system

• audio / video indication to know the material is kept inside

• dynamic / static models

Send Enquiry

Fan Unit Filter

dyna fan filter provides a class a working environment (according to gmp

guidelines). The main focus of application is product or process protection against contamination

introduced by many sources, such as personnel, general work area, manufacturing, performance,

process, machinery, or the product itself. These modules are typically installed in an inverted t-bar

grid suspended from the ceiling.

features:

• excellent cost / performance ratio.

• wide variety of sizes and configurations to satisfy nearly any requirement

• minipleat hepa filter of efficiency 99. 999% for supply.

• close pleated pre-filters for suction 95% for suction.

• can be modularly supplemented.

• user-friendly handling.

• magnehelic gauge for pressure differential.

• fluorescent light.

• uv light along with hour meter.

• acrylic/ polycarbonate side panels.

• units are available in two types

1. horizontal flow.

Send Enquiry

Fine Air Filters

dyna filters has achieved the status of a major indian air filters and clean room

equipments manufacturer and regular clients include most of the leading pharmaceutical and

electronic product manufacturers, as well as nuclear power, atomic energy and space research

establishments. Leading consultants, user industries and hvac turn-key engineering companies

have approved our products and test facilities.

dyna fine filters are used for high level prefilteration in air conditioning of paint booths, air handling

units etc.

Send Enquiry

Garment Storage Cabinets

dyna garment cabinets are specially designed to prevent deposit of dust and other

particles on clean room garments when not in use. An integral hepa filter and blower assembly

provides a continuous wash of class 100 air over the garments.

features:

• minipleat hepa filter of efficiency 99. 999% for supply

• magnehelic gauge for pressure differential

• uv light along with hour meter

• sliding glass doors

• pu caster wheels for easy movement

• leg levelers in ss304

• sloping top prevents particle build-up and promotes easy cleaning

• 100% recirculation type

Send Enquiry

Hepa & Ulpa Cells Filters

dyna hepa filters for dynamic performance in high efficiency filtration system.

Having an optimum filtration area enhancing the better life with less pressure drop gives the

customers satisfaction and relief by cost effect advantage. Dyna hepa filters are designed to meet

international standards as per iso, ies rp, mil 282 etc. Every filter is certified to have minimum

efficiency of 99. 97% to 99. 997% and above in removing particles of 0. 3 micron and above.

features:

• low initial pressure drop. High dust holding capacity.

• high cost / performance ratio. Wide range of standard sizes.

• individually leak tested

Send Enquiry

Hepa Air Filters

dyna, hepa filters are designed for the air intake and extract systems of critical

applications where high efficiency filtration is necessary. Dyna hepa filters are capable of retaining

particulate matter down to 0. 01 microns. Dyna hepas are available with efficiencies between 95%

and 99. 999% (h10-h14 upto u17).

• low initial pressure drop.

• high dust holding capacity.

• high cost / performance ratio.

• wide range of standard sizes.

• individually leak tested.

Send Enquiry

Laminar Air Flow Work Stations

dyna laminar work stations create areas supplied with a continuous flow of clean air

to maintain a work environment that is free from dirt, particles, and toxic or noxious fumes. Laminar

work stations are designed to foster worker comfort, convenience and productivity. These

equipments are pre-fabricated, in a compact modular design and are available in a wide variety of

sizes and configurations to satisfy nearly any requirement.

they provide a class a working environment (according to gmp guidelines). The main focus of

application is product or process protection against contamination introduced by many sources,

such as personnel, general work area, manufacturing, performance, process, machinery, or the

product itself.

• excellent cost / performance ratio

• minipleat hepa filter of efficiency 99. 999% for supply

• user-friendly handling

• magnehelic gauge for pressure differential

• fluorescent light

• uv light along with hour meter

• acrylic/ polycarbonate side panels

• units are available in two types

1. horizontal flow.

2. vertical flow

and s. S. 304/316 matt finish or crca powder coated with ral 9002 shade

construction

Send Enquiry

Minipleat Hepa Filters

dyna minipleat hepa filters are used in situations requiring high or very high level of

purity. They are primarily designed as intake filters for low turbulence displacement flow clean

room ceilings and clean workbenches.

typical applications can be found in: microelectronics, semiconductor manufacture, medicine,

chemistry, pharmacy, microbiology, film and magnetic tape production, compact disk manufacture,

laboratories and the food industry.

• low initial pressure drop.

• high dust holding capacity.

• high cost / performance ratio.

• wide range of standard sizes.

• individually leak tested.

• factory extruded, lockable type, 69 mm aluminium casing.

• compact in size and light in weight.

Send Enquiry

Pocket & Bag Type Air Filter

dyna pocket type filters are, high dust holding capacity filters with long service life to

provide an economic solution to high efficiency air filtration in commercial hvac applications. Dyna

pocket type filters are designed for use in air handling units and air conditioning systems which

have separate pre-filters or where multi-layer type bag filters are not suitable.

• high dust holding capacity.

• high air flow rate.

• high cost / performance ratio.

• low initial pressure drop.

• sturdy construction and light in weight.

Send Enquiry

Pre Air Filter

dyna prefilters are used for coarse pre-filteration, provision against insects, textile

fibres, coarse applications. Dyna prefilters are available in the range of 15 to 20 micron (g3, g4

class) and 10 micron (f5, f6)

• low initial pressure drop

• light in weight and easy to handle

• high cost / performance ratio

• high dust holding capacity

• cleanable / washable

• applications:

• air-conditioning systems.

• industrial ventilation systems.

• coarse filtration and pre-filtration.

Send Enquiry

Reverse Laminar Air Flow Workstations

dyna make reverse laminar airflow workstations, clean room equipment, are

suitable for dispensing of powder and chemicals and to minimize the risk of contaminating the work

zone and ensure health safety for person working with chemicals/powder. This equipment is based

on the recirculation of air and ensures that the cloud formed by the material dispensed, is sucked in

a natural pattern of movement and arrested through prefilters. The air is then supplied back at the

work zone through hepa. After initial cycles, we achieve, class 100 hazard proof laminar movement

of air and handling of material.

features:

• minipleat hepa filter of efficiency 99. 999% for supply.

• close pleated pre-filters / intermediate filters for suction.

• magnehelic gauge for pressure differential.

• fluorescent light with milky diffuser cover.

• three-pin switch with socket.

• feather touch on-off switches.

• puf insulated side panels.

• internal ss pencil coving.

• drag shield to create air barrier at front

Send Enquiry

Static Pass Box

dyna pass boxes avoids cross contamination and also minimize the entry of

contaminants into the clean room while transferring the material from one classified area to another

features:

• excellent cost / performance ratio.

• fluorescent light.

• uv light along with hour meter.

• pensile coved internal corners.

• mechanical / electromagnetic door interlocking system.

• buzzer indication to know the material is kept inside.

• indicating lamp to know the door lock-unlock condition.

Send Enquiry

Sterilizing Tunnel

sterilizing tunnel is a tunnel like region, responsible for dry heat sterilization and

depyrogenation of containers, vials, bottles, ampoules etc. The containers are sent to the sterilizing

tunnel through a conveyor belt and sterilized with the help of heated air flow, which is generated by

means of a fan and a heater.

these highly efficient sterilizers make use of laminar air flow to sterilize glass vials / ampoules and

bottles. The air flow can be controlled by adapting the rpm of the fan during the heating phase.

Send Enquiry

Panel (Clean Room Equipment ) Dyna modular cleanrooms are engineered and built to meet exact size and environmental

requirements and specifications. It is the most economical and time saving answer to your clean

room requirements. Being a very user friendly and simple design it offers almost zero dependency

on other contractors for relocation of clean room.

• Complete facility for design, manufacturing, supply installation & testing.

• Modular hard wall double skin construction.

• Polyurethene PUF insulation of density 38kg/m3 density. Non CFC hence environment

friendly.

• Base profiles of extruded aluminium with integrated single way /two way wings.

• Individual coving profiles of extruded aluminium made especially fit wall to wall and ceiling

to wall corners.

• All supply air outlets can be made to suit the requirements.

• All electrical and engineering utilities can be provided as per URL.

• Complete set of validation documents can be provided.

Send Enquiry

Loading...

Ads by Google

AIRPLANIndustrial Plant Solutions

Cleanroom Projects cGMP · ISO 14644

www.airplan-sa.com

Knauf Drywall SystemsFire & Moisture & Impact Resistant

Dry Wall Gypsum Boards

www.knauf.ae

Cleanroom WipersWipers and other products for all

applications and industries.

www.texwipe.com

Related Product Catalogs

Omega Filters IndiaDeals in manufacturing

and supplying of air

filters, air oil separator,

basket filters, cartridge

filters, compressor filters,

filter bags, woven filter

bags, filter cartridges,

gas turbine filters,

hydraulic oil filters and

Hydrotherm Engineering ServicesManufacturer and

exporter of activated

carbon filters, carbon

filters, filtration plants,

industrial filtration

systems, sand filters and

reverse osmosis

Industrial Compressor ComponentManufacturer and

exporter of of compressor

filters, industrial

compressor filters, filter

dryers, air conditioner

filter dryers, refrigeration

system filter dryers, acid

Related Categories

Diesel Fuel Filters

Harmonic Filters

Suction Filters

Pulse Jet Filters

Filter Bags

Lube Filters

Air Filters

Self Cleaning Filter

Suggested Companies

Aim Filtertech Private Limited

Ratan Engineering Co. (P) Ltd.

Aashirwad International Pvt. Ltd.

Bks Enterprises

pleated filters etc.

View more details

membranes.

View more details

removal filter dryers and

sludge removal filter

dryers.

View more details

..