cleanroomlabequipment_1_2011

A Sampler from Terra’s Mega Website

© Copyright 2010 Terra Universal, Inc.Sampler Vol. 5, No. 14

TERRA UNIVERSAL

TERRA UNIVERSALCleanroom & Laboratory EquipmentCleanroom & Laboratory Equipment

Low-Cost Solutions for High-Tech Industries

Low-Cost Solutions for High-Tech Industries

ModularCleanrooms

Note: All prices and specifications are subject to change without notice. Crating charges apply to selected items. Call for information.

® 2010 Terra Universal, Inc. All rights reservedPrinted in USA 121510

ModularCleanrooms

Convert any space into a controlled environment at a fraction of the cost, in a fraction of the time!

Hardwall Designs• Acrylic, polycarbonate, or static-dissipative PVC rigid

panels for full visibility

• Steel support frame spans up to 20 feet without internal pillars or external supports

• Mirror-finished exterior stainless steel trim

• A/C and humidity controls

• Available raised floors optimize laminar airflow

1To Order, Call — 714-578-6000 or Fax 714-578-6020 Vol. 5 No. 14

D. Ventilation RoomAdjustable ceiling ventilator draws air upward through HEPA filters and/or exhaust duct work. Ideal for safe removal of fine powders or chemical vapors. Select among several transparent plastic and steel panel designs.

E. Powder-Containment RoomAir recirculation zone draws powders away from personnel into a dual HEPA filtration system to protect both product and personnel. Adjustable air handler creates overall negative pressure to protect the external environment.

F. Negative-Pressure CleanroomCeiling filter/fan units create laminar flow of particle-free air. Exhaust ductwork and adjustable air handlers create overall negative pressure to protect external environment from pharmaceutical powders and biohazards.

A. Single-Wall Laminar Flow CleanroomInternally mounted plastic panels create smooth, easy-clean surfaces and allow full visibility. Exit filters available to capture powders and other sub-micron particulates or chemical vapors.

B. Double-Wall Steel Laminar Flow Cleanroom

Stainless or powder-coat steel structure features rounded corners for easy cleaning. Double-wall construction is ideal for high/low temperature applications. Available with anti-microbial coatings and raised floor.

C. Double-Wall Plastic Laminar Flow Cleanroom

Ideal for applications that require full visibility and raised flooring for true laminar flow. Double-wall structure allows air to circulate through the inter-wall plenum, increasing filtration and A/C efficiency.

Softwall Cleanrooms• Portable, expandable, easy to

assemble & disassemble

• Solid panels and parting strip shields, in dissipative and nondissipative clean materials

• Rigid steel support frame requires no ceiling supports

• Casters available

Easy-mount curtains and strip shields available for wall or ceiling mounting.

Filtered Air

Dirty Air

Make-Up AirVersatile Cleanroom Configurations

USP<797>-compliant

2 Thousands of Critical Environment Solutions: www.TerraUniversal.com

• Smoothinteriorwalls—easytowashdown,sterilize

• All-steeldesignswithradiuscornerseliminatecracksandcrevices

• Positive-pressureandnegative-pressuremodelsforlaminarfloworexhaustventilation

• Steelceilinggridrequiresnoexternalbracing,acceptsstandardfiltersandlightingmodules

• 304/316stainlesssteelorpowder-coatsteel

• Anti-microbialpanelcoatingsavailable

• AirrecirculationsystemboostsA/Candfiltrationefficiency

BioSafe™ All-Steel Cleanrooms

304 Stainless Steel BioSafe™ Cleanroom(See illustration B on facing page)

Any size or floor plan!

Powder-coated steel BioSafe™ Cleanroom

Powder-coated steel BioSafe™ cleanroom

BioSafe™ cleanroom with anti-microbial 304 stainless steel and tempered glass panels


Modular CleanroomAccessories and Controls

A.High-SpeedRoll-UpDoorThis high-performance door features a non-porous, non-shedding, non-permeable PVC-coated curtain that operates at up to 42"/second—ideal for moving large materials in and out of a room quickly! Meets cGMP, FDA and EMEA requirements. Withstands both negative and positive pressure differentials. Custom sizing available. Cat. # $/Each

Model shown (6'W x 8'H) 6710-53 11,250.00

B.SwingDoorsSelect aluminum or 304/316 stainless steel, with either door panels of dissipative PVC or tempered glass, which is ideal for aseptic operations that require sterilization. Double-door and sliding door designs also available; full ordering information at TerraUniversal.com. Model shown: Cat. # $/Each

304 Stainless Stell Frame, Tempered Glass Panel 6602-00 19,000.00

C.HEPA-FilteredHigh-VelocityAirCurtainMounts to doorway to minimize contamination of a controlled area. Motion sensor initiates downward stream of HEPA-filtered air at up to 1900 feet/minute to remove particles as personnel enter the cleanroom. Dimensions: 48"W x 17.5"D x 19"H. Includes three HEPA filters and three prefilters. Cat. # $/Each

6601-50 4,043.00

D.CleanroomPass-ThroughsandAirShowersTerra offers a complete range of pass-through chambers that simplify clean transfer of parts in and out of the cleanroom. Model shown: roll-up door pass-through, mounted in BioSafe™ Cleanroom. Cat. # $/Each

Roll-Up Door Pass-Through 6705-12B 11,6546.00 (44"W x 30"D x 61.5"H)

Complete line of wall-mount pass-throughs for cleanrooms begins on page 14.

A B

C D


Full specifications at TerraUniversal.com

E/F.BioSafe™PowderContainmentRoomDesigned for pharmaceutical powder weighing, packaging, and purity testing, this double-wall steel enclosure features a CleanZone™ module that safely drawn air away from a operator and recirculates it through a ceiling HEPA filter. A wide access area, with parting vinyl strip shields, allows easy transfer of large containers. Additional ceiling HEPA filter units creates low-particle conditions throughout the room.

G.ModularAirConditioningSystemTerra’s versatile HVAC modules can be configured to circulate air through ceiling HEPA fan units for optimal efficiency. Ventilation modules control internal pressure, and humidification/dehumidification modules maintain constant %RH.

H.BarrierWallsandEnclosuresModular glass and stainless steel panels create barrier walls that are easy to clean and sterilize. Modular ceiling structure accommodates HEPA fan filter units to meet cleanliness standards.

InstallationandTestingTerra supports your project from pre-sales consultation to final validation. Ask about Terra’s EnergySaver systems, which automate FFU and exhaust fan operation for precise airflow control and energy savings!

• Design and Engineering

• Fabrication

• Control Automation

• Installation

• Air Balancing

• Environmental Testing

• Seismic Analysis

• Third-Party Certification (cGMP, ETL, UL, CSA)

E

F

G H


No. 6705-26B Stainless Steel Pass-Through

Pass-ThroughChambers(Doorsaremadeofmaterialindicatedinparentheses;otherdesignsavailable.)

Mo

un

tTyp

e

(W" x D" x H") Add 1/2" to

W x H for cut-out)

304StainlessSteelNoncontinuous

Seams(3)(Stainless Steel Doors/

Dissipative PVC Windows)

304StainlessSteelCleanSeam™(3)

ContinuousSeam(Stainless Steel Doors/ Dis-

sipative PVC Windows)

Powder-CoatedSteel

(Powder-Coat Doors/Dis-sipative PVC Windows)

Polypropylene(Nondissipative PVC

Doors)

StaticDissipativePVC

(Dissipative PVC Doors)

Acrylic Do not clean with alcohol.

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

Wal

l(1)

12 x 12 x 12 1992-09C 1,898.00 2636-01C 2,538.00 1991-00C 1,067.00 1992-26C 1,087.00 1992-37C 1,064.00 1993-12C 815.0012 x 12 x 24 1992-10C 2,490.00 2636-02C 3,370.00 1992-18C 1,380.00 1992-27C 1,257.00 1992-38C 1,437.00 1948-20C 1,013.0018 x 18 x 16 1992-11C 2,653.00 2636-03C 3,604.00 1992-00C 1,680.00 1992-28C 1,526.00 1992-39C 1,661.00 1992-48C 1,090.0018 x 18 x 24 1992-12C 2,940.00 2636-04C 3,994.00 1992-19C 1,853.00 1992-29C 1,726.00 1992-40C 1,875.00 1992-49C 1,230.0024 x 24 x 16 1992-13C 3,276.00 2636-05C 4,469.00 1993-00C 1,904.00 1992-30C 1,790.00 1992-41C 2,002.00 1992-50C 1,339.0024 x 24 x 24 1992-14C 3,481.00 2636-06C 4,752.00 1992-20C 2,040.00 1992-31C 1,891.00 1992-42C 2,078.00 1992-51C 1,404.0024 x 36 x 24 1992-15C 4,563.00 2636-07C 6,162.00 1992-21C 2,119.00 1992-32C 2,151.00 1992-43C 2,597.00 1992-44C 1,985.0024 x 24 x 48 6705-26C 4,215.00 2636-16C 6,690.00 6705-27C 2,030.00 6705-28C 2,305.00 — — 6705-29C 2,142.0036 x 36 x 24 1997-03C 4,637.00 2636-08C 7,013.00 1992-22C 2,238.00 1992-33C 2,283.00 — — 1992-52C 2,117.0024 x 24 x 36 1992-16C 4,897.00 2636-09C 6,426.00 1992-23C 2,186.00 1992-34C 2,234.00 1992-45C 2,675.00 1992-46C 2,067.0036 x 36 x 36 1997-06C 5,037.00 2636-10C 7,643.00 1992-24C 2,283.00 1992-35C 2,463.00 — — 1992-53C 2,296.0036 x 36 x 48 1997-08C 5,445.00 2636-11C 8,050.00 1992-25C 2,603.00 1992-36C 2,621.00 — — 1992-80C 2,455.00

Floo

r(1

) 24 x 24 x 36 1992-84C 4,570.00 2636-12C 7,455.00 1993-01C 2,448.00 1993-04C 2,580.00 1993-07C 4,413.00 1993-08C 2,413.0036 x 36 x 36 1992-85C 5,841.00 2636-13C 8,612.00 1993-02C 2,545.00 1993-05C 2,660.00 — — 1993-09C 2,492.0036 x 36 x 48 1992-86C 6,246.00 2636-14C 10,234.00 1993-03C 2,865.00 1993-06C 3,160.00 — — 1993-10C 2,964.00

1) Floor Mount models include low-profile access ramps for easy transport of carts (subtract 1" from internal vertical clearance to compensate for ramps).

(2) Sliding doors require vertical overhead clearance equal to the door height, so 36"H model should be mounted no closer than 36" below the cleanroom ceiling. Mounting bracket included.

(3) Electropolishing available: See TerraUniversal.com

• Allowscontamination-freetransferofmaterialsinandoutofthecleanroomorlaboratory

• Stainlesssteel-reinforceddoorsextendtheservicelifeofchambers

• Foolproofinterlockmechanismpreventscrosscontamination

• Dozensofstandardsizesandconfigurations: Standard Chambers: below Modular Cleanroom Chambers: page 8 Cleanroom Talk-Through: page 8 BioSafe Chambers: page 10 Air-Conditioned Chambers: page 12 Roll-Up Door Chambers: page 14 Fire-Rated Chambers: page 13 Air Showers: page 15

CleanroomPass-Through Chambers FirmLok™Interlock

Terra’s FirmLok™ prevents cross-contamination by ensuring that only one pass-through door at a time can open.

The moment a door is opened, the latch engages a stainless steel catch to lock out the opposing door. The highly reliable interlock design is rated for thousands of trouble-free operations.

The dual heavy-gauge latch mechanisms retract inside the easy-clean stainless steel housing when not engaged.

No. 1993-12BAcrylic Pass-Through

No. 1992-86B Stainless Steel Floor-Mount Pass-Through

Dirty Side

Clean Side

Interlock

Standard Installation: Mechanical interlock requires that both doors

close on the same sidewall

Now with all-stainless steel LiftLatches™

for cleaner operation


CorrespondingPass-ThroughAccessories—forPass-ThroughChambersonfacingpage.(W" x D" x H")

Add 1/2" to W x Hfor cut-out)

SlidingDoorPass-Through(2)

FirmLok™MechanicalInterlocks(4)Cannotberetrofitted

StainlessSteel

Shield(5)

StainlessSteelShelf

(5)

StainlessSteelRack

(5)For Standard

Pass-ThroughsFor Pass-ThroughsWith Sliding Door

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # $/Each

12 x 12 x 12 — — 6705-50 555.00 6705-55 555.00 1992-65A 1992-70A 205.00 1993-40A 106.0012 x 12 x 24 — — 6705-50 555.00 6705-55 555.00 1992-65A 1992-70A 205.00 1993-41A 196.0018 x 18 x 16 — — 6705-51 625.00 6705-56 625.00 1992-66A 1992-71A 221.00 1993-42A 172.0018 x 18 x 24 1993-16A 1,281.00 6705-51 625.00 6705-56 625.00 1992-66A 1992-71A 221.00 1993-43A 196.0024 x 24 x 16 1993-17A 1,288.00 6705-52 694.00 6705-57 694.00 1992-67A 1992-72A 257.00 1993-44A 172.0024 x 24 x 24 1993-18A 1,446.00 6705-52 694.00 6705-57 694.00 1992-67A 1992-72A 257.00 1993-45A 196.0024 x 36 x 24 1993-19A 1,446.00 6705-53 833.00 6705-58 833.00 1992-68A 1992-73A 349.00 1993-46A 196.0024 x 24 x 48 — — 6705-52 694.00 6705-57 694.00 1992-67A 1992-72A 257.00 1993-48A 328.0036 x 36 x 24 1993-20A 1,986.00 6705-53 833.00 6705-58 833.00 1996-69A 1992-27A 486.00 1993-47A 196.0024 x 24 x 36 1993-21A 1,986.00 6705-52 694.00 6705-57 694.00 1992-67A 1992-72A 257.00 1993-49A 246.0036 x 36 x 36 1993-22A 1,986.00 6705-53 833.00 6705-58 833.00 1992-69A 1993-28A 486.00 1993-49A 246.0036 x 36 x 48 — — 6705-53 833.00 6705-58 833.00 1992-69A 1993-28A 486.00 1993-50A 328.0024 x 24 x 36 1993-24A 1,986.00 6705-52 694.00 6705-57 694.00 1992-67A 1992-72A 257.00 1993-51A 249.0036 x 36 x 36 1993-25A 1,986.00 6705-53 833.00 6705-58 833.00 1992-69A 1993-28A 486.00 1993-52A 249.0036 x 36 x 48 1993-26A 2,026.00 6705-53 833.00 6705-58 833.00 1992-69A 1993-28A 486.00 1993-53A 328.00

(4) All use a fail-proof mechanical design that requires no maintenance. Made of stainless steel. Must be specified when Pass-Through is ordered (cannot be retrofitted). For electropolishing add “-2” to the Cat. number and $75.00 to the price.

(5) Shields are recommended in all plastic pass-throughs to prevent scratching. Racks allow adjustable shelf placement and are required for use with shelves.

CleanSeam™Pass-ThroughAn easy-clean, hermetically sealed enclosure designed for ultra-clean requirements.These chambers eliminate particle influx when exposed to negative pressure. Continuous-seam welds are ground smooth for easy cleaning and disinfection. Ideal for use with ventilation or ULPA air-shower options (see page 6).

Sliding Door Option— Counterweighted door eliminates clearance

FluorescentIlluminator Cat. # $/Each

For models up to 18"W 1993-33 245.00 For models over 18"W 1993-34 342.00

GroundingTerminalsRecommended on steel and dissipative PVC chambers. 1686-12 72.00

AccessClearances Width = W (nominal) – 1.88" Depth = D (nominal)* – .12" Height = H (nominal) – 1.25"

WallCut-Out = W (nominal) +0.5" x H (nominal) + 0.5"* Subtract .5" for plastic chambers. Each

door adds .5" to nominal depth.

InstallingYourPass-ThroughChamberAll Terra Pass-Through Chambers include two sets of stainless steel mounting brackets, which require 0.25" clearance between the wall cut-out and the chamber. Standard mounting allows 2" of the chamber to protrude on the cleanroom side, with the remainder of the chamber resting on the wall and protruding to the “dirty” side. The cleanroom side bracket is welded in place, and the other bracket is bolted to the opposite side of the wall. Support braces are recommended for chambers with a depth ≥ 36", or for chambers with heavy loads.

OtherOptions ULPA Air Showers See page 9 Ventilation Modules See page 9 CleanTop Sloped Top See page 9 Germicidal UV Lighting See page 8 Talk-Through Ports See page 8 Self-Closing Hinges See page 9

SupportBrace

Powder-Coat SteelCat. # 1993-83B$/Each 268.00

Stainless SteelCat. # 1993-60B$/Each 278.00

FILE NAME: Pass-Through Opening Clearance Illustration.ai

D(nom.)

ClearanceDepth

.25”

.25”

Top View

H(nom.)

.25”

.25”

.25”cut-out

gap

.25”cut-out

gap.25”.25”

ClearanceHeight

ClearanceWidth

Wall Cut-Out

Front View

W (nom.)

FILE NAME: Pass-Through Welded Illustration.ai

Mounting Bracket (welded to chamber)Mounting Bracket (slides onto chamber)

GroundingTerminal(optional)

“Clean Side”

2"

20"

20"SupportBracket

(optional)

“Dirty Side”

1/4"

No. 2636-06B CleanSeam Pass-Through


Pass-ThroughChambersforHardwallCleanrooms AccessoriesOutside

Dimensions(W" x D" x H")

Add 1/2" to W x Hfor cut-out)

ElectropolishedStainlessSteel

(Stainless Steel Doors/ Dissipative PVC Windows)

StainlessSteel(Stainless Steel Doors/

Dissipative PVC Windows)

StaticDissipativePVC

Acrylic(Do not clean with alcohol)

MountingPanelFor installation on a

standard 7'-high Terra Modular Cleanroom

FirmLok™Mechanical

Interlock


12 x 12 x 12 6704-80B 1,693.00 6704-85B 1,459.00 6704-95B 761.00 6704-90B 512.00 6704-70 549.00 6705-50 555.0018 x 18 x 16 6704-81B 2,511.00 6704-86B 2,165.00 6704-96B 1,331.00 6704-91B 759.00 6704-71 549.00 6705-51 625.0018 x 18 x 24 6704-82B 2,819.00 6704-87B 2,384.00 6704-97B 1,667.00 6704-92B 948.00 6704-72 549.00 6705-51 625.0024 x 24 x 24 6704-83B 3,385.00 6704-88B 2,879.00 6704-98B 1,806.00 6704-93B 992.00 6704-73 549.00 6705-52 694.0024 x 24 x 36 6704-84B 4,569.00 6704-89B 3,450.00 6704-99B 2,412.00 6704-94B 1,594.00 6704-74 549.00 6705-52 694.00

•Modularpanelmountingsystemallowsinstallationatanymodularcleanroomlocation(seepage5forstandardpositioning)

•Optionalmechanicalinterlocksminimizeriskofcrosscontamination

Pass-through chambers below are designed for installation in Terra’s acrylic, static-dissipative, or polycarbonate hardwall cleanroom. Select desired size and corresponding mounting panel for a standard 7'-H wall (specify other wall height).

Pass-Through Chambersfor Modular Cleanrooms

Humidity Module for Pass-Through ChambersConverts any Terra pass-through into a low-humidity storage desiccator, with convenient access from either side! This module automatically controls a nitrogen purge to the pass-through to maintain any sub-ambient set point (to 0%RH). It takes only seconds to program, and its smart control system minimizes nitrogen consumption. 120/240VAC; requires 30 psi nitrogen supply line. Cat. # $/Each

2636-17 998.00Includes installation on specified chamber.

A B

UV Sterilization ModulesTerra provides several UV sterilization solutions (254 or 365 nm) to meet specific requirements, including timed sterilization cycles with interlocked doors.

Call to discuss your specifications!

A. External programmable control module allows adjustment of sterilization cycle duration. During sterilization, doors are locked and warning alarms are activated.

B. UV sterilization and exhaust ventilation cycles operate

under time control whenever a door is opened and closed. Safety shut-off cuts power to the sterilization module when a door opens.

Cleanroom Talk-ThroughProvides easy communication with cleanroom personnel without the need to open a door on contaminants! Overlapping mylar strips create a diaphragm that blocks particles with transmitting sound. Mounts on a 7.75"-diameter cut-out. Cat. # $/Each

5050-50 277.00

Cleaner,MoreDurableLatches!

All-stainless steel LiftLatches™, standard on Terra pass-throughs, eliminate flaking and corrosion that affect plated hardware.


Pass-Through ChamberAccessories

Terra’s online QuickQuote Planner configures a system to your specifications:www.TerraUniversal.comJust click on Pass-Throughs

SaveTime!

Ventilation SystemDesigned for stainless steel pass-throughs, this system removes solvents and other hazardous vapors from materials while they are in the pass-through. System components (flange and filter) must be ordered together with the pass-through. Active ventilation system, with onboard ventilation blower, also available; call to discuss your application.

StainlessSteelFlange Cat. # $/Each

6"-diameter x 3"; connects to in-house ventilation system 6705-23 256.00

InletULPAFilter 6705-24 269.00Removes particles from make-up air. Includes 99.999% efficient ULPA filter and 304 SS filter housing, installed to side of pass-through (specify desired location).

ULPA Filtered Air ShowerFits on top of any Terra Pass-Through 18"D or larger. Includes ON/OFF status light and door sensor switch (for connection to “dirty” side access door).

Standard housing material is 304 stainless steel; other materials are also available. Price includes installation on specified pass-through chamber. Cat. # $/Each

1993-11A 1,716.00

CleanTop™ 304 Stainless Steel Sloping TopIn most applications, pass-throughs extend only 2" into a cleanroom to minimize clearance requirements and surfaces that could collect particles. The CleanTop is designed for installations that require the chamber to be centered in the wall. The 30° sloping top on clean room side minimizes particles and accommodates laminar flow.

Available for stainless steel pass-throughs of 18", 24" and 36" overall depth. Price is for CleanTop feature only; order Pass-Through Chamber separately. Both must be specified on the same order (CleanTop cannot be retrofitted).

Electronic Door OpenerAvoid spills or other accidents that result when both hands are full! This foot pedal-activated door also reduces contamination by eliminating repeated hand-to-door contact. The non-contaminating door mechanism opens and closes the door with a slow, controlled motion. Cat. # 6705-80

Call to discuss your application.

SprinklerModuleInstalled inside the pass-through for safe operation with flammable materials. Cat. # $/Each

1993-30 431.00

CleanTop™304StainlessSteelSlopingTopPass-ThroughDimensions

CleanTopDimensions

304StainlessSteel*Cat. # $/Each

18"W x 18"D 18"W x 6"D 6705-15 243.0024"W x 24"D 24"W x 10"D 6705-16 305.0036"W x 24"D 36"W x 10"D 6705-17 390.0036"W x 36"D 36"W x 16"D 6705-18 486.00

* Electropolished and powder-coated models available; see TerraUniversal.com.

Spring-LoadedHingeUse in conjunction with electronic door to ensure hand-free door closure. Call for quotation. Cat. #

6705-14


BioSafe™Pass-Through Chambers

Now with all-304/316 stainless steel latches to eliminate scratching, corrosion and contamination common with plated hardware.

•Seamless — Unique design eliminates cracks, corners and other contaminant traps!

•Lipless — Easy material transfer with no clearance obstruction

•EasytoClean — Ultra-smooth internal surfaces

•EasytoSterilize — 304/316 SS; removable doors can be autoclaved

•Double-Wall,SealedConstruction — adds rigidity and houses interlock and standard or custom utilities without compromising the ultra-clean design


Smooth, Ultra-Clean Surfaces Eliminate Germ Traps, Simplify Cleaning and Disinfection

Removable doors are available with and without windows, suitable for steam

sterilization

No-lip, smooth chamber interior features radius corners for easy cleaning and

disinfection

BioSeal edge seals against non-contaminating, chemically resistant

polyurethane set in doors

BioSafe™StainlessSteelPass-ThroughChambers—OptimizedforAsepticBiologicalandPharmaceuticalRequirementsThese unique Pass-Throughs feature all-continuous-seam welds with radius corners to produce ultra-clean, smooth internal surfaces that wipe down quickly and easily. Their no-lip design eliminates clearance restrictions and gives you full use of the chamber interior. This design simplifies the transfer of materials into and out of the cleanroom or laboratory.

All components of these chambers have been engineered to optimize cleanliness and simplify disinfection. The doors feature inset polyurethane, a durable, chemically resistant, non-contaminating elastomer, which seals against the raised edge along the chamber perimeter. This bioseal eliminates the need for adhesive gaskets that can creep, crack and outgas. Doors are available with and without tempered glass viewing windows. Both styles can be easily removed after pass-through installation, allowing you to interchange models. They are also designed to be steam sterilized to help maintain an aseptic environment.

UniquePass-ThroughInterlockEliminatesCross-Contamination

The rugged interlock mechanism prevents the handle and latch of either door from moving when the opposing door is open, protecting your cleanroom or laboratory from contamination during material transfer. The rugged latch pins ensure that an interlocked door cannot be forced open. The isolated interlock design further optimizes cleanliness. Because the mechanism is mounted in its own, narrow-profile housing, the inside of the pass-through chamber itself remains unobstructed and easy to sterilize.

All models include two sets of stainless steel mounting brackets, which help support the chamber and cover the wall cut-out. Standard configuration is a mounting bracket welded 2" from the front of the chamber on the “clean” side; the remaining bracket is bolted to the wall on the “dirty” side of the wall and fits tightly against the chamber. This design accommodates walls of varying thicknesses and ensures minimal intrusion into valuable cleanroom space. Specify other desired bracket location when ordering.

Rugged mechanical interlock is isolated in a narrow-profile compartment leaving the internal chamber smooth and

easy to sterilize.RemovableRackandShelfSystemSimplifiesCleaningAll models are available with removable stainless steel racks that accommodate sliding stainless steel shelves.

Racks are easy to remove or retrofit into existing cabinets. Each side panel features a locking mechanism at each corner that fixes the unit in place with the turn of a screw. To clean or sterilize the chamber, you simply remove shelves and loosen these screws to remove the rack panels. The positioning system requires no modification to the chamber interior, so it remains ultra-smooth and easy to sterilize. Once racks and shelves are cleaned, they can be reinstalled in a matter of seconds.

Now with all-stainless steel LiftLatches™

for cleaner operation

Removable racks allow easy cleaning and sterilization

See next page for ordering information.


AirConditionedPass-ThroughIdeal conditioning chamber that inhibits growth of microbes. Double-wall, insulated 304 stainless steel chamber features a refrigeration system that maintains stable temperatures down to 5°C. Continuous seam welding produces a hermetically sealed enclosure. Includes double-paned static-dissipative PVC viewing windows and mounting brackets. Chamber inside dimensions: 24"W x 24"D x 24"H. Cat. # $/Each

6705-75 16,533.00

BioSafe™304/316StainlessSteelPass-Throughs(1)(orderdoorsseparately;seebelow)

CorrespondingAccessories

OutsideDimensionsW" x D" x H"

(Add .5" to W x H for cut-out)Doors add 1" to depth

InsideDimensions

W" x D" x H"

Electropolished304StainlessSteel


RemovableRacks304Electropolished

StainlessSteel

304ElectropolishedStainlessSteelShelf

(order rack separately)Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

17.5 x 12 x 13.6 12 x 12 x 12 2636-59A-2 7,264.00 2636-74A-2 8,839.00 2638-50-2 303.00 2638-60-2 236.0017.5 x 12 x 25.6 12 x 12 x 24 2636-60A-2 8,754.00 2636-75A-2 10,665.00 2638-51-2 341.00 2638-60-2 236.0023.5 x 18 x 17.6 18 x 18 x 16 2636-61A-2 9,530.00 2636-76A-2 11,625.00 2638-52-2 331.00 2638-61-2 289.0023.5 x 18 x 25.6 18 x 18 x 24 2636-62A-2 10,568.00 2636-77A-2 12,885.00 2638-53-2 385.00 2638-61-2 289.0029.5 x 24 x 17.6 24 x 24 x 16 2636-63A-2 11,263.00 2636-78A-2 13,739.00 2638-54-2 363.00 2638-62-2 310.0029.5 x 24 x 25.6 24 x 24 x 24 2636-64A-2 11,963.00 2636-79A-2 14,592.00 2638-55-2 391.00 2638-62-2 310.0029.5 x 36 x 25.6 24 x 36 x 24 2636-65A-2 17,919.00 2636-80A-2 20,237.00 2638-56-2 435.00 2638-63-2 341.0029.5 x 24 x 37.6 24 x 24 x 36 2636-67A-2 17,931.00 2636-82A-2 20,214.00 2638-57-2 424.00 2638-62-2 310.0033 x 24 x 51.6 27.5 x 24 x 50 2636-84-2 19,141.00 2636-85-2 21,385.00 2638-58-2 534.00 2638-64-2 324.00

(1) Mounting brackets (included) are made of stainless steel. All brackets require 1/4" clearance between wall cut-out and pass-through. Standard mounting is 2" from the front of the cleanroom side (specify other desired location).

CorrespondingStainlessSteelDoors(orderoneforeachside)Outside

DimensionsW" x D" x H"

SolidDoors(nowindows) DoorswithTemperedGlassWindows304SS 316SS 304SS 316SS

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

17.5 x 12 x 13.6 2638-00-2 189.00 2638-10-2 265.00 2638-20-2 378.00 2638-30-2 454.0017.5 x 12 x 25.6 2638-01-2 252.00 2638-11-2 353.00 2638-21-2 441.00 2638-31-2 542.0023.5 x 18 x 17.6 2638-02-2 239.00 2638-12-2 335.00 2638-22-2 428.00 2638-32-2 524.0023.5 x 18 x 25.6 2638-03-2 277.00 2638-13-2 389.00 2638-23-2 466.00 2638-33-2 578.0029.5 x 24 x 17.6 2638-04-2 265.00 2638-14-2 371.00 2638-24-2 454.00 2638-34-2 560.0029.5 x 24 x 25.6 2638-05-2 302.00 2638-15-2 423.00 2638-25-2 491.00 2638-35-2 612.0029.5 x 36 x 25.6 2638-05-2 302.00 2638-15-2 423.00 2638-25-2 491.00 2638-35-2 612.0029.5 x 24 x 37.6 2638-07-2 403.00 2638-17-2 565.00 2638-27-2 599.00 2638-37-2 754.0023 x 24 x 51.6 2638-39-2 403.00 2638-40-2 565.00 2638-41-2 599.00 2638-42-2 754.00

MountingBraceInstalled on the “dirty” side wall to support 36"-deep chambers (two recommended). See page 3. Cat. # $/Each

1993-60B 278.00

GroundingTerminalsPrice includes installation Cat. # $/Each

1686-12 72.00

BioSafe™ Pass-Throughs, continued

Refrigerated Pass-Through ChambersPreserve and protect samples between processes

Refrigeration module available for all Terra steel chambers

Heavy-Use Pass-Through —A Nearly Indestructible Chamber!This all-stainless steel pass-through features a heavy-wall design with an isolated, heavy-duty interlock system that resists tampering and breakage. Designed for high-security and heavy-use applications, the each door interlock resists opening force up to 100 lbs. without damage. Full line of models available at TerraUniversal.com.


Fire-Rated DoorPass-Throughs

• Fire-ratedaccesspanelscarrytheUL-Blabelfor90-minutefireexposure(suitablefor2-hourwallrating)

• 304stainlesssteelchamberprovidesadurable,chemical-resistantpass-throughhatch

• Accessdooronnon-ratedsideincludesLiftLatchandstatic-dissipativePVCviewingwindow

• Durablemechanicalinterlockmechanismensuresthatonlyonedooratatimecanopen,therebypreventingcrosscontamination

These pass-through chambers are designed for installation in a fire-rated cleanroom or laboratory wall.

Each chamber features a 2.56"-thick, non-insulated 304 stainless steel access panel (door) with a pull handle. Its one-inch exposed flange can be mounted on any typical wall material. These modules bear a UL- listed “B” label for 1.5 hours in walls (maximum temperature rise to 250°F in 30 minutes). This self-closing door is fabricated of 304 stainless steel and includes a flush continuous piano hinge and opening knob.

Two stainless steel chamber designs are available. CleanSeam models feature continuous-seam welds, minimizing the chance of particle influx and making them easy to clean and sterilize.

TestingStandards:WH horizontal onlyASTME-152NFPA 252UBC 43-7UL vertical UL 10b, horizontal UL263

Pass-ThroughswithFire-RatedDoors*OutsideDimensions

(W" x D" x H")InsideClearance

(W" x D" x H")StandardChambers** CleanSeamChambers

Cat. # $/Each Cat. # $/Each

12 x 14.5 x 12 9.8 x 12 x 10.6 1993-71 4,051.00 1993-77 4,456.0018 x 20.5 x 24 15.8 x 18 x 22.6 1993-72 6,796.00 1993-78 7,476.0024 x 26.5 x 24 21.8 x 24 x 22.6 1993-73 8,232.00 1993-79 10,395.0024 x 26.5 x 48 21.8 x 24 x 46.6 1993-74 11,442.00 1993-80 12,863.0036 x 38.5 x 36 33.8 x 36 x 34.6 1993-75 13,881.00 1993-81 15,270.0036 x 38.5 x 48 33.8 x 36 x 46.6 1993-76 14,894.00 1993-82 16,383.00

* For wall cut-out, add 0.5" to overall width x height. All models include mounting brackets and interlock mechanism.

** Features non-continuous seam welds. For critical low-contamination applications, select continuous-seam CleanSeam™ chambers.

Fire-ResistantCleanroom Pass-Throughs

•Double-wall304stainlesssteelconstructioniscleananddurable(electropolishedmodelsavailable)

•Optional10"x10"clear,polishedfire-ratedceramicglassviewingwindowsaffordfullvisibilityofmaterials

•Mechanicalinterlockpreventscrosscontamination

These chambers feature double-wall stainless steel construction and polished ceramic glass viewing windows, in accord with fire safety requirements. Their smooth design eliminates lips that can collect particles or impede transfer of materials in and out of the cleanroom. Models are available with electropolished surfaces to meet the most stringent cleanroom requirements. All models come with mechanical interlocks.

Dimensions Fire-ResistantPass-ThroughsOutside

(W" x D" x H")Inside

(W" x D" x H")StainlessSteel ElectropolishedStainlessSteel

WithWindow* NoWindow WithWindow* NoWindowCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

39.5 x 28 x 38.25 36.5 x 24.5 x 29.5 6705-00 16,354.00 6705-01 15,261.00 6705-02 17,225.00 6705-03 16,133.00* 10" x 10" dual viewing windows are made of clear, polished fire-rated ceramic glass.

Fire-rated doors not available with viewing window.


Pass-ThroughAir Shower

These Pass-Through Air Showers offer an effective way to remove surface-deposited particles on carts as you transfer them into the clean room. Adjustable nozzles provide concentrated streams of high-velocity HEPA-filtered air that lifts off contaminants, which are purged through vents along the bottom of the chamber. Nozzles are arranged uniformly on walls to ensure effective distribution of filtered air.

The closed-loop circulation design directs contaminated air downward through grills and hollow walls of the Air Shower and back to the filter, which removes 99.99% of all particles as small as 0.3 microns. Interlocking doors prevent unnecessary contamination inflow and thereby prevent cross-contamination of the cleanroom. They automatically release in the event of a power failure. Chamber Dimensions: 36"W x 36"D x 48"H (custom sizes available).

AirShowerPass-Through Powder-Coated Steel 304 Stainless Steel Cat. # $/Each Cat. # $/Each

120VAC 6705-70 10,150.00 6705-71 16,134.00 220VAC 6705-70-220 10,150.00 6705-71-220 16,134.00

No. 6705-12A

No. 6705-13A

This unique, space-saving pass-through features dual-side segmented doors that automatically roll up and down at the push of a PLC control pad. This design eliminates door clearance requirements and makes it easy for gloved personnel to operate while holding parts. Motorized lifters are sealed inside a noncontaminating housing.

Roll-UpPass-ThroughsDimensions Floor Mount

(Includes Ramps)Corresponding

AirShowerOutside(W" x D" x H")

Excluding Hardware

Inside(W" x D" x H")


44 x 30 x 61.5 29 x 28 x 44 6705-12B 11,546.00 6705-60 1,956.0063.5 x 50 x 87 52.75 x 48 x 66.25 6705-10B 18,270.00 6705-61 2,012.00

82.5 x 50 x 78.75 68 x 48 x 61.25 6705-13A 20,732.00 6705-62 2,144.00(1) Includes mounting brackets made of stainless steel. All brackets require 1/4" clearance

between wall cutout and pass-through. Standard mounting is 2" from the front of the cleanroom side (specify other desired location). Bracket on cleanroom side is welded in place; remaining bracket attaches to opposing side of wall.

Roll-Up DoorPass-Throughs

No. 6705-10B


ValuLine™ Polypropylene Air Showers and Air Locks• Completelyself-contained,pre-wired

systemdirectshigh-velocity,filteredairthroughadjustablenozzlestoremovesurfacecontaminantsaspersonnelenterthecleanroom

•Idealfortransferringcartsandotherlargeequipment

•ModularframedesignallowseasyintegrationintoastandardTerrahardwallmodularcleanroom

•Versatiledesignletsyoupositiontheairshowerinsideoroutsidethecleanroom—evenasanairlockbetweeninternalrooms

•Polypropyleneconstructionwithsealed,covedseamsensurescleanoperation,resistsawiderangeofchemicals

•DualHEPAfiltersremove99.99%ofparticles≥0.3micronsfromtheairstream

•PLCcontrolpanelactivateselectronicinterlockswhenairshoweristurnedon

•OversizedemergencySTOPbuttonsonbothdoorsimmediatelydisengageinterlocksandhaltairshower

•Disassemblesforeasytransferthroughdoorways,corridors

The ValuLine™ Air Shower provides a cost-effective way to move people, as well as carts and other large equipment, in and out of a cleanroom without contributing to the contamination load.

Its dual 1745 RPM fans generate a high-velocity flow of HEPA-filtered air, which passes through eight adjustable nozzles on each side of the enclosure to dislodge surface contaminants. The PLC control panel includes a timer that interlocks doors for the selected cycle time to prevent cleanroom personnel for opening a door and contaminating the cleanroom. Oversized emergency EPO buttons can be pressed at any time to release the door interlocks and halt shower operation.Clean, Versatile ConstructionThe modular design of the ValuLine Air Shower allows simple, versatile integration of the unit into Terra’s standard Hardwall Modular Cleanrooms.

The top and bottom steel supports interlock into the cleanroom frame structure, allowing positioning either outside or inside the enclosure at any point along the cleanroom perimeter. The unit can also be installed along an internal cleanroom wall to provide an air lock between rooms of differing cleanliness classifications. In this application, users have the option of operating the air shower or not, depending on cleanroom protocol.

Double-wall polypropylene construction with 100% sealed seams ensures clean operation and resistance to a wide range of chemicals, including most acids and cleaning formulations.

Specifications (for 7' ceiling height; other heights available)Power: 115VAC, 50/60Hz, 12 Amps (220VAC model available)

Overall Dimensions: 58.875"W x 55.375"D x 97.75"H (Interior: 48"W x 48"D x 84"H, with 36" doorway)

Materials: 0.5"-thick stress-relieved polypropylene (exterior walls); 0.25"-thick stress-relieved polypropylene (interior walls and top cover);

1.75" powder-coated steel frames at top and bottom (interlocks with standard Terra cleanroom frames);

Aluminum-frame door with transparent static-dissipative PVC panels

Motor: 1745 RPM (2 units)

Filters: 99.99% efficient HEPA (rated at 0.3µm particles); 2 per blower (4 total)

ValuLine™PolypropyleneAirShower(orderfiltersseparately)

Cat. # $/Each

115VAC, 60Hz 6601-55 10,290.00230VAC, 50/60Hz 6601-55-220 10,290.00HEPA Filters 27.75" x 13" x 3" (4 required) 1681-02 260.00

Shown installed inside Modular Hardwall Cleanroom

Air Showers andWalk-Throughs


Gowning BenchesSee page 28 for other gowning room products

Gowning BenchesThese ultra-clean electropolished stainless steel benches won’t shed particles or snag wipers during cleaning. Terra offers several designs, including cylindrical-tube models in sizes from 36" to 84" long. Visit TerraUniversal.com for full details.

Solid Top

Rod-top, cylindrical frame

Floor-Mounted

Rod-top, square frame


OpenTop™ Perf-Top Bench with Recessed “C”-Base (No. 9601-62)

CleanroomWork Stations

Model Shown: No. 9601-8736"W x 24"D with “A” Base

Model Shown: No. 9601-2048"W x 30"D with recessed “C” Base

Rod-Top Tables• Rods float in non-outgassing elastomer, minimizing noise

and vibration

• Model shown: No. 9601-87 (36" x 34")

Solid-Top Tables• Full bull-nosed front edge, in two frame designs

• Model shown: No. 9601-87 (36" x 34")

Perforated-Top Tables• Hidden reinforcements add

strength and create superior laminar flow-through (.25" or .75" holes)

• Full bull-nosed front edge, in two frame designs

Ordering information on next page.


Stainless Steel Cleanroom Work Benches

HEAVY DUTYSquare Tube BasesAdvanced Technology

A. Electropolished304StainlessSteelDrawers

B. FootStool – Electropolished Stainless Steel Cat. #2803-90 $250.00

C. Retractable Keyboard Tray – .25" rods mounted on nylon rollers for clean operation. 24" wide.

Cat. #1540-01-2 $473.00

D. EnclosedPowerStrips– GFCI outlets with vacuum fittings, in many widths.

E. EquipmentMounts – Clip onto rod tops. Several standard sizes.

F. ElectropolishedStainlessSteelMountingFeet

Cat. #1540-04-2 $23.00

G. NylonFixedMountingFoot Cat. #1534-50A $30.00

Full ordering information at www.TerraUniversal.com.

AccessoriesBench

Heavy-DutyAll-ElectropolishedStainlessSteelWorkStations(800-lb.loadcapacity)

BenchSize 1 “A”Base “C”Base

$/Each 1“A”Base “C”Base



$/Each 1(W" x D") Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. #

24 x 24 9601-01 9601-02 1,582.00 9604-51 9604-72 1,535.00 9601-43 9601-44 1,427.00 9601-85 9601-86 1,159.0036 x 24 9601-03 9601-04 1,662.00 9604-52 9604-73 1,664.00 9601-45 9601-46 1,502.00 9601-87 9601-88 1,233.0048 x 24 9601-05 9601-06 1,903.00 9604-53 9604-74 2,221.00 9601-47 9601-48 2,008.00 9601-89 9601-90 1,496.0060 x 24 9601-07 9601-08 2,156.00 9604-54 9604-75 2,410.00 9601-49 9601-50 2,142.00 9601-91 9601-92 1,551.0072 x 24 9601-09 9601-10 2,409.00 9604-55 9604-76 2,706.00 9601-51 9601-52 2,384.00 9601-93 9601-94 1,744.0084 x 24 9601-11 9601-12 2,721.00 9604-56 9604-77 2,845.00 9601-53 9601-54 2,468.00 9601-95 9601-96 1,959.0096 x 24 9601-13 9601-14 3,014.00 9604-57 9604-78 3,276.00 9601-55 9601-56 2,846.00 9601-97 9601-98 2,181.0024 x 30 9601-15 9601-16 1,672.00 9604-58 9604-79 1,612.00 9601-57 9601-58 1,503.00 9601-99 9603-00 1,209.0036 x 30 9601-17 9601-18 1,802.00 9604-59 9604-80 1,668.00 9601-59 9601-60 1,586.00 9603-01 9603-02 1,382.0048 x 30 9601-19 9601-20 2,006.00 9604-60 9604-81 2,224.00 9601-61 9601-62 2,221.00 9603-03 9603-04 1,571.0060 x 30 9601-21 9601-22 2,266.00 9604-61 9604-82 2,403.00 9601-63 9601-64 2,250.00 9603-05 9603-06 1,713.0072 x 30 9601-23 9601-24 2,673.00 9604-62 9604-83 2,704.00 9601-65 9601-66 2,357.00 9603-07 9603-08 1,932.0084 x 30 9601-25 9601-26 2,860.00 9604-63 9604-84 2,835.00 9601-67 9601-68 2,511.00 9603-09 9603-10 2,168.0096 x 30 9601-27 9601-28 3,183.00 9604-64 9604-85 3,278.00 9601-69 9601-70 3,006.00 9603-11 9603-12 2,410.0024 x 36 9601-29 9601-30 1,763.00 9604-65 9604-86 1,609.00 9601-71 9601-72 1,579.00 9603-13 9603-14 1,267.0036 x 36 9601-31 9601-32 2,006.00 9604-66 9604-87 1,748.00 9601-73 9601-74 1,672.00 9603-15 9603-16 1,502.0048 x 36 9601-33 9601-34 2,209.00 9604-67 9604-88 2,279.00 9601-75 9601-76 2,175.00 9603-17 9603-18 1,672.0060 x 36 9601-35 9601-36 2,489.00 9604-68 9604-89 2,469.00 9601-77 9601-78 2,316.00 9603-19 9603-20 1,796.0072 x 36 9601-37 9601-38 2,688.00 9604-69 9604-90 2,694.00 9601-79 9601-80 2,503.00 9603-21 9603-22 2,000.0084 x 36 9601-39 9601-40 3,014.00 9604-70 9604-91 2,883.00 9601-81 9601-82 2,643.00 9603-23 9603-24 2,175.0096 x 36 9601-41 9601-42 3,214.00 9604-71 9604-92 3,374.00 9601-83 9601-84 3,108.00 9603-25 9603-26 2,342.00

1 Prices for “A” base and “C” base designs are the same. Standard height is 30" (floor to top). Heights of 32" and 36" and widths of 34" are available at no extra charge. Specify when ordering.

QuietTop™RodswithFullBullnoseø1⁄4"rodson1"centers

OpenTop™PerforatedwithErgoEdge™RoundedFrontø1⁄4"holes


SolidTopwithErgoEdge™RoundedFront

A B

C

D E

F

G


Stainless Steel Cleanroom Work Benches LIGHT DUTYSquare Tube Bases

AdvancedTechnology

Above-Bench ShelfSupport uprights can be added to any standard Terra work station to accommodate an overtop shelf made of 1⁄4"-diameter rods on 2" centers. Standard height of a 12"D shelf is 12" above the bench surface (custom shelf depths and heights are available).

Under-Bench ShelfStandard mounting is 211/2" above the floor. Select 12"D or 18"D (custom shelf depths and heights are available). Made of 1/4"-diameter rods on 2" centers.

Base StylesHeavy Duty — 11⁄2" x 11⁄2" square tubesLight Duty — 1" x 1" square tubes “C” Base“A”Base

30"H

Perforated shelves now available!

Light-DutyAll-ElectropolishedStainlessSteelWorkStations(800-lb.loadcapacity,“A”&“C”basesare1"squaretubes)

BenchSize 1 “A”Base “C”Base




$/Each 1(W" x D") Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. # Cat. #

24 x 24 9603-90 9603-91 1,476.00 9604-93 9605-02 1,257.00 9604-08 9604-09 1,209.00 9604-26 9604-27 1,134.0036 x 24 9603-92 9603-93 1,612.00 9604-94 9605-03 1,387.00 9604-10 9604-11 1,294.00 9604-28 9604-29 1,178.0048 x 24 9603-94 9603-95 1,740.00 9604-95 9605-04 1,578.00 9604-12 9604-13 1,439.00 9604-30 9604-31 1,294.0024 x 30 9603-96 9603-97 1,527.00 9604-96 9605-05 1,272.00 9604-14 9604-15 1,223.00 9604-32 9604-33 1,178.0036 x 30 9603-98 9603-99 1,814.00 9604-97 9605-06 1,527.00 9604-16 9604-17 1,439.00 9604-34 9604-35 1,322.0048 x 30 9604-00 9604-01 2,032.00 9604-98 9605-07 1,735.00 9604-18 9604-19 1,601.00 9604-36 9604-37 1,465.0024 x 36 9604-02 9604-03 1,709.00 9604-99 9605-08 1,346.00 9604-20 9604-21 1,304.00 9604-38 9604-39 1,218.0036 x 36 9604-04 9604-05 1,873.00 9605-00 9605-09 1,609.00 9604-22 9604-23 1,524.00 9604-40 9604-41 1,451.0048 x 36 9604-06 9604-07 2,083.00 9605-01 9605-10 1,800.00 9604-24 9604-25 1,672.00 9604-42 9604-43 1,481.00

1 Prices for “A” base and “C” base designs are the same. Standard height is 30" (floor to top). Heights of 32" and 36" and widths of 34" are available at no extra charge. Specify when ordering.

QuietTop™RodswithFullBullnoseø1⁄4"rodson1"centers



SolidTopwithErgoEdge™RoundedFront

RodShelves(1/4"rodson2"centers) PerforatedShelves(3/4"holes)

ForBenchWidth

Above-Bench Under-Bench Above-Bench Under-Bench12"D, fixed 12" above bench 12"D, fixed 21.5" above floor 18"D, fixed 21.5" above floor 12"D, fixed 12" above bench 12"D, fixed 21.5" above floor 18"D, fixed 21.5" above floor


For“

C”

Bas

es

24" 1530-69-2 361.00 1530-68-2 296.00 1530-67-2 393.00 1534-00-2 328.00 1534-07-2 270.00 1534-14-2 356.0036" 1530-86-2 393.00 1530-87-2 361.00 1530-88-2 457.00 1534-01-2 356.00 1534-08-2 328.00 1534-15-2 416.0048" 1530-53-2 424.00 1525-61-2 393.00 1525-62-2 472.00 1534-02-2 386.00 1534-09-2 356.00 1534-16-2 431.0060" 1530-54-2 472.00 1525-80-2 424.00 1525-84-2 553.00 1534-03-2 431.00 1534-10-2 386.00 1534-17-2 503.0072" 1530-55-2 561.00 1525-81-2 457.00 1525-85-2 601.00 1534-04-2 509.00 1534-11-2 416.00 1534-18-2 548.0084" 1530-56-2 683.00 1525-82-2 521.00 1525-86-2 794.00 1534-05-2 619.00 1534-12-2 472.00 1534-19-2 722.0096" 1530-57-2 772.00 1525-83-2 761.00 1525-87-2 890.00 1534-06-2 657.00 1534-13-2 693.00 1534-20-2 809.00

For“

A”

Bas

es

24" 1527-65-2 361.00 1527-72-2 296.00 1527-79-2 393.00 1534-21-2 328.00 1534-28-2 270.00 1534-35-2 356.0036" 1527-66-2 393.00 1527-73-2 361.00 1527-80-2 457.00 1534-22-2 356.00 1534-29-2 328.00 1534-36-2 416.0048" 1527-67-2 424.00 1527-74-2 393.00 1527-81-2 472.00 1534-23-2 386.00 1534-30-2 356.00 1534-37-2 431.0060" 1527-68-2 472.00 1527-75-2 424.00 1527-82-2 553.00 1534-24-2 431.00 1534-31-2 386.00 1534-38-2 503.0072" 1527-69-2 561.00 1527-76-2 457.00 1527-83-2 601.00 1534-25-2 509.00 1534-32-2 416.00 1534-39-2 548.0084" 1527-70-2 683.00 1527-77-2 521.00 1527-84-2 794.00 1534-26-2 619.00 1534-33-2 472.00 1534-40-2 722.0096" 1527-71-2 722.00 1527-78-2 761.00 1527-85-2 890.00 1534-27-2 657.00 1534-34-2 693.00 1534-41-2 809.00

Price includes mounting at height specified.


Stainless Steel Tops• StainlesssteelworksurfacemeetsClass100particle

requirements

• Choiceofadjustable“A”baseornonadjustable“C”baseavailableineitherfinishedsteelorstainlesssteel

• Groundterminalsandwrist-strappinconnectorsalloweasygroundingofionizingguns,wriststraps,andotherstaticprotectionequipment


Laminate Tops • SealedlaminatetopdesignmeetsClass100particle

requirements

• Static-dissipativelaminate(106to108ohms/sq.)safelydissipateschargestoreducepossibilityofelectro-staticdischarge(meetsMIL-B-81705-Bspecifications)

• Selectadjustable“A”baseorrecessed“C”basetosuityourapplicationrequirements

• Optionalmodularoverheadfluorescentlightfixtureprovidesshadow-freeviewinganywhereonbenchtopsurface

• Optionalionizingfanprovidessafe,reliable,staticneutralization

Stainless steel C-Base bench (No. 1521-55) and optional drawer unit

Static-dissipative C-Base Bench No. 1521-32, with No. 1524-50 uprights, 1700-76 light, 1700-90 shelf and 1740-07 drawer.

IonBar™ (with fan module)Projects a balanced stream of positive ions for neu-tralization of static charges throughout a restricted area. Requires shelf and shelf support for fixed in-stallation. Can be used with any Terra bench. Cat. # $/Each

22"Long 2005-30 777.0033"Long 2005-32 878.0044"Long 2005-31 979.00

304StainlessSteelTopw/FinishedSteelBase* LaminateTopsBench-

topDimens.(W" x D")

SolidTop PerforatedTop(.75" ID Hole)** NonconductiveTops StaticDissipativeTops“A”BaseDesign

“C”BaseDesign

“A”BaseDesign

“C”BaseDesign

“A”BaseDesign

“C”BaseDesign

“A”BaseDesign

“C”BaseDesign

(telescoping legs)

(recessed legs)

(telescoping legs)

(recessed legs)

(telescoping legs)

(recessed legs)

(telescoping legs)

(recessed legs)

Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each48 x 30 1521-45 1521-54 1,056.00 1522-56 1522-66 1,345.00 1722-00 1521-09 580.00 1728-00 1521-31 898.0060 x 30 1751-00 1521-55 1,141.00 1522-57 1522-67 1,449.00 1724-00 1000-00 638.00 1730-00 1521-32 920.0072 x 30 1752-00 1521-56 1,197.00 1522-58 1522-68 1,658.00 1726-00 1000-01 648.00 1732-00 1521-33 961.0084 x 30 1521-46 1521-57 1,249.00 1522-59 1522-69 1,832.00 1521-01 1000-02 722.00 1521-23 1521-34 967.0096 x 30 1753-00 1521-58 1,285.00 1522-60 1522-70 1,988.00 2402-00 1000-03 774.00 2400-00 1521-35 1,113.0048 x 34 1521-49 1521-61 1,142.00 1522-61 1522-71 1,352.00 1723-00 1521-16 623.00 1700-29 1521-38 930.0060 x 34 1700-65 1521-62 1,232.00 1522-62 1522-72 1,601.00 1725-00 1521-17 650.00 1731-00 1521-39 956.0072 x 34 1700-66 1521-63 1,272.00 1522-63 1522-73 1,749.00 1727-00 1521-18 692.00 1733-00 1521-40 1,009.0084 x 34 1521-50 1521-64 1,341.00 1522-64 1522-74 2,032.00 1521-05 1521-19 759.00 1521-27 1521-41 1,089.0096 x 34 1521-51 1521-65 1,392.00 1522-65 1522-75 2,294.00 1521-06 1521-20 809.00 1521-28 1521-42 1,155.00

* Stainless Steel Scuff Guards included on finished C-Base benches; order separately for A-Bases. Nonadjustable (one piece) legs also available with “A” Base design at no additional cost (specify when ordering). Finish is white powder coat.

** For .25"diameter perforations, add $32/ft. of width to the standard pricing.


Stainless SteelDrawers

Stainless Steel Leg Member

Stainless Steel Leg MemberReplaces lower leg of A-Base benches to guard against scuffs. Cat. # $/Each

1741-25 24.00


Chemical-Resistant Tops• Lightweightpolypropyleneworksurfaceprovides

optimalprotectionagainstacidsandothercausticchemicals

• Cleanroom-compatibledesignmeetsClass100particlerequirements

• Perforatedtopwithplenumchamberavailableforventingfumesduringwetprocessingoperations

• Raised“ship’sedges”availabletocontaindangerousspills

• Modularoverheadfixturehousesthree-positionfluorescentlight(orderseparately)

A-Base Bench No. 1522-01, shown with optional drawers

ShelfandLightSupports

Material For Light/Shelf For Shelf Only (36") (18") Cat. # $/Pair Cat. # $/Pair

Stainless Steel 1525-68 245.00 1525-69 178.00Finished Steel 1524-50 119.00 1524-51 94.00

CleanroomDrawers(See Cat. # 105 , page 349 for other models)No.of

DrawersMin.

DrawerHeight

ABSPlastic(141⁄8"W x 151⁄4"D)

304StainlessSteel(16"W x 18"D)

Cat. # $/Each Cat. # $/Each1 3" 1740-23 151.00 — —1 6" 1740-02 160.00 1741-20 205.001 12" 1740-98 197.00 1741-21 277.002 3", 6" 1740-14 311.00 — —2 6", 6" 1740-15 321.00 1741-22 409.002 6", 12" 1740-06 358.00 1741-23 482.003 3", 6", 12" 1740-07 484.00 — —3 6", 6", 6" 1740-09 481.00 1741-24 614.004 3", 3", 6", 6" 1740-08 624.00 — —

PolypropyleneTops CorrespondingAccessoriesBenchtopDimens.(W" x D")

PolypropyleneSolidTop FluorescentLightFixtures

(finished steel)

304StainlessSteelShelf(12" X 1.25")

(Fits on either upright)

NonconductiveShelf

(12" X 1.25")(Fits on either upright)

Static-DissipativeShelf

(12" X 1.25")(Fits on either upright)

“A”BaseDesign

(Telescoping Legs)

“C”BaseDesign

(Recessed Legs)Cat. # Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

48 x 30 1522-00 1522-14 870.00 1524-78 548.00 1525-26 547.00 1527-07 126.00 1524-80 229.0060 x 30 1522-01 1522-15 910.00 1700-76 593.00 1525-27 580.00 1000-65 129.00 1700-90 234.0072 x 30 1522-02 1522-16 935.00 1700-78 638.00 1525-28 609.00 1000-66 137.00 1700-92 253.0084 x 30 1522-03 1522-17 943.00 1527-00 669.00 1525-29 624.00 1000-67 143.00 1527-35 260.0096 x 30 1522-04 1522-18 1,085.00 1700-80 722.00 1525-30 649.00 1000-68 150.00 1700-94 272.0048 x 34 1522-07 1522-21 910.00 1524-78 545.00 1525-26 547.00 1527-07 126.00 1524-80 229.0060 x 34 1522-08 1522-22 932.00 1700-76 593.00 1525-27 580.00 1000-65 129.00 1700-90 234.0072 x 34 1522-09 1522-23 985.00 1700-78 638.00 1525-28 609.00 1000-66 137.00 1700-92 253.0084 x 34 1522-10 1522-24 1,065.00 1527-00 669.00 1525-29 624.00 1000-67 143.00 1527-35 260.0096 x 34 1522-11 1522-25 1,312.00 1700-80 722.00 1525-30 649.00 1000-68 150.00 1700-94 272.00

* Frame and legs feature a powder-coat finish. C-Base includes stainless steel scuff–guards to protect against scratching (order separately for A-Base).

32"H

BaseStyles: Telescoping “A” Base – Adjustable 25"-34"H

Recessed “C” Base


No. 1570-53A - Stainless Steel Top

Vibration-Free Work Station• Pneumaticvibration-freemountsisolateupto90%of

buildingvibration,eliminateoperatorfatigueandnauseaduringmicroscopeoperations

• Low-profile,ergonomicdesigncombinesstabilitywithconvenience

• Built-inpneumaticcontrollersimplifiesleveling,allowscontinuousin-lineoperation

• Suitableforcleanroomuse

• Bumperisolatesfrontedge,providesanarmrest.

• Selectworksurfacematerialforyourapplication:nonconductiveanddissipativelaminates,stainlesssteel,andUltraClean™electropolishedstainlesssteel

• AvailableinUltraClean™FinishedStainlessSteelforthemostcriticalcontaminationrequirements

Vibration-FreeWorkStations NonconductiveLaminateTop

StaticDissipativeLaminateTop

304StainlessSteelTop ElectropolishedStain-lessSteelTop,Frame

&LegsWork

SurfaceDimensions

(W" x D")

Numberof

Isolators

MaximumLoad*

(lbs.)

“A”BaseDesign** “A”BaseDesign** w/FinishedCRSteelFrame,Legs“A”BaseDesign**

AllStainlessSteelConstruction

“A”BaseDesign**

“A”BaseDesign**

Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

48 x 30 4 360 1570-00A 1,789.00 1570-26A 1,980.00 1570-52A 2,193.00 1570-80A 2,644.00 1570-80A-2 3,009.0060 x 30 4 350 1570-01A 1,821.00 1570-27A 2,013.00 1570-53A 2,266.00 1570-81A 2,742.00 1570-81A-2 3,141.0072 x 30 6 550 1570-02A 1,835.00 1570-28A 2,033.00 1570-54A 2,314.00 1570-82A 2,826.00 1570-82A-2 3,262.0084 x 30 6 540 1570-03A 1,886.00 1570-29A 2,188.00 1570-55A 2,429.00 1570-83A 2,991.00 1570-83A-2 3,465.0096 x 30 6 530 1570-04A 1,989.00 1570-30A 2,296.00 1570-56A 2,532.00 1570-84A 3,123.00 1570-84A-2 3,592.0048 x 34 4 360 1570-07A 1,738.00 1570-33A 2,008.00 1570-59A 2,267.00 1570-87A 2,979.00 1570-87A-2 2,979.0060 x 34 4 350 1570-08A 1,790.00 1570-34A 2,060.00 1570-60A 2,376.00 1570-88A 3,228.00 1570-88A-2 3,228.0072 x 34 6 550 1570-09A 1,857.00 1570-35A 2,086.00 1570-61A 2,520.00 1570-89A 3,429.00 1570-89A-2 3,429.0084 x 34 6 540 1570-10A 1,979.00 1570-36A 2,277.00 1570-62A 2,604.00 1570-90A 3,393.00 1570-90A-2 3,393.0096 x 34 6 530 1570-11A 2,016.00 1570-37A 2,401.00 1570-63A 2,734.00 1570-91A 3,464.00 1570-91A-2 3,464.00

* Maximum loads with plate weights removed. ** Nonadjustable (one piece) legs also available with “A” base design at no extra cost (specify when ordering). Select stainless steel scuff guards to protect finished steel legs. See page 19.

CleanroomVibration Isolation Work Stations

Granite Isolator• Low-cost,easy-clean

platform—simpledesignrequiresnoairsupply

•Polishedgraniterestsonsiliconeisolators,providing2.4Hzhorizontalnaturalfrequency

Top (W x D) Cat. # $/Each

13" x 15" 1580-20 544.00 16" x 21" 1580-21 945.00 18" x 26" 1580-23 1,210.00

High-Performance Vibration Isolation Tables, from TMC• PatentedGimbalPistonIsolatorsachieve

bothhorizontalandverticalisolationdowntoverylowinputlevels(completeisolationspecsatTerraUniversal.com)

• Modular,ergonomicdesignenhancesfunctionalityandcomfort

• Cleanroom-compatibleconfigurationincludesductedairexhaustforclean,particle-freeoperation

These vibration-isolation tables are ideal for applications in electrophysiology, cell injection, photomicroscopy and other critical applications. All models come with stainless steel top; cleanroom-compatible models include all-SS construction and ducted exhaust. Isolation efficiency: 90 – 97% @ 10Hz. Low input specification (natural frequency): 1.5 – 2.0Hz (vertical), 1.2 – 1.7Hz (horizontal). Net load capacity: 500 lbs. Requires 80 psi air or nitrogen.

TopDimensions

(W x D)

StainlessSteelTopwithPowder-CoatedFrame

All-StainlessSteelCleanroomModels*


30" x 30" 3435-12 3,135.00 — —36" x 30" 3435-13 3,153.00 3435-00 5,055.0048" x 30" 3435-14 3,220.00 3435-01 5,150.0060" x 30" 3435-15 3,355.00 — —48" x 36" 3435-16 3,305.00 3435-02 5,345.0060" x 36" 3435-17 3,455.00 3435-03 5,430.00

* Includes armrest. Available with electropolished finish.


Vibration-Free Platform• Portablelow-profiledesignallowsformultiple

vibration-freeworkstationsonasinglebench

• Pneumaticvibration-isolationmountsdampenupto90%ofbuildingvibration,eliminateoperatorfatigueandnauseaduringmicroscopeoperations

• Alsoisolatesvibration-producingequipmentfromtheworksurface

• Availableinseveralsizesandmaterials,includingUltraClean™electropolishedstainlesssteel

• Easytosetupandrelocate

Specifications Vibration-FreePlatformWork

SurfaceMaximum

Load*UltraClean™Finish

304StainlessSteelTop(W" x D" x H") (lbs.) Cat. # $/Each

21.75 x 18.25 x 3 213 1580-02 2,178.0023 x 24 x 3 213 1580-03 2,468.00

* Internal plate weight should be removed before operation with net loads over 100 lbs.

QUICKShip

ID: 213:48 06-22-84 SPEED: LOW HORIZ: -86µM

SCAN: 150µM VERT: -495 A

M CUR: 172 AR CUR: 667 A

@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000M R M R




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000




@ 11µM@ 97 µM

SLOAN DETAK II

O 20 40 60 80 100 120 140

O

200

400

600

800

1,000M R M R

Test results by a Sloan Dektak II Surface Profile Measuring System with and without Terra’s Virbration-Free Platform.

DownDraft Work Stations This work station is ideal for soldering or chemical processing that requires the removal of potentially hazardous fumes. Its powerful 1200 CFM blower draws exhaust fumes downward, away from the operator, for safe removal and purification. The activated charcoal filter removes 98% of most organic chemical vapors, allowing safe release.

Benchtops, made of cleanroom-grade white laminate, raise the work surface 32" off the floor. Exhaust fumes enter the filter through three perforated stainless steel platforms positioned at the center of the work surface. Specify other desired platform sizes or locations.

Benchtop Dimensions (32"H, including leveling feet)

110VAC/60Hz 220VAC/50HzCat. # Cat. # $/Each

48"W x 30"D 1728-01 1728-01-220 3,934.0060"W x 30"D 1728-02 1728-02-220 4,344.0072"W x 30"D 1728-03 1728-03-220 4,736.0048"W x 34"D 1728-06 1728-06-220 3,953.0060"W x 34"D 1728-07 1728-07-220 4,364.0072"W x 34"D 1728-08 1728-08-220 4,755.00

Filters Cat. # $/Each

Activated Charcoal 1716-00A 450.00 HEPA 1681-02 260.00


Shown with optional shelf

Sneeze GuardIdeal for microscope work. 7.12" x 7.25" with eyepiece cut-out. Acrylic Dissipative PVC Cat. # $/Each Cat. # $/Each

1601-50 12.00 1601-51 25.00


Cleanroom Vacuum Cleaner With ULPA FiltrationA four-stage filtration system, which includes a final ULPA filter, rated 99.999% efficient @ 0.12 µm particles, and quiet operation (59 dBA at 6.5 feet) make this vacuum ideal for cleanroom use. Includes filter set and tool kit with two 22" stainless steel tubes, 3" round brush, combination 12" floor nozzle, 6'6" conductive plastic hose, trolley, 30' power cord, conductive crevice nozzle and 5" utility nozzle. Cat. # $/Each

120VAC 1764-00 977.00 220VAC 1764-00-220 977.00

Minuteman Explosion-Proof VacuumThis 15 gal., wet/dry vacuum is ideal for picking up flammable liquids, finely pulverized dust, and other hazardous materials. Operates wet and dry in Class I Group D and Class II Group F & G atmospheres. Features a 22-gauge non-sparking stainless steel tank, with ULPA filter, manometer, and static conductive casters and wheels. Cat. # $/Each

115VAC 1001-70 7,449.00 Tool Kit 1001-71 917.00

Minuteman Cleanroom VacuumThe CRV is designed for use in Class 1 through Class 100,000 cleanrooms. Features a three-stage ULPA filtration system, stainless steel four-wheel carriage, and a collection bag indicator. The quiet motor supplies a powerful suction at a constant airflow with a noise level of 65 dBA. Electromagnetic/radio frequency interference filtration (RFI/EMI) is also available for more stringent applications. Cat. # $/Each

115V 1001-64 1,041.00 RMI/EMI 115V 1001-65 1,205.00 Tool Kit 1001-66 183.00

Compact, Versatile MicroVac™ — Vacuum or Clean Air Blower• Includes 99.999% efficient ULPA filter to capture sub-micron particulates

• Ideal for cleaning up hazardous powders, pharmaceutical spills

• Ventilates bio cabinets, glove boxes and other small enclosures

• Provides burst of particle-free air to clean keyboards, PCBs and other delicate surfaces

• Mini-tool kit pinpoints small surface features

• An economical continuous clean air source for dozens of applications

Step 1Disposable Paper Bag

Woven Wire Mesh Filter

99.999 Particle

Collection 0.12µm

Step 4ULPA Filter

Step 2Permanent Cloth Bag

MicroVac Cat. # $/Each

110VAC/60Hz 5100-00 1,003.00 220VAC/50Hz 5100-00-220 1,108.00MicroVacToolKit 5100-05 31.00ReplacementFilters Stage 1 Disposable Paper Bag 5100-01 85.00 Stage 3 Class 10,000 Filter 5100-02A 15.00 Stage 4 Class Replacement ULPA Filter 5100-04 165.00

Triple-Duty Cleaning!• Captures and contains chemical powders• ULPA-filtered clean air blower• Ventilates glove boxes and other enclosures


Vacuum Cleaners

Work Tables: byInterMetroVersatile lines of lab tables in many sizes, materials, top designs and option configurations—see complete ordering information at TerraUniversal.com.

A. Stainless steel lab table, No. 1533-84 / $1,029, shown with optional shelf, drawer, keyboard tray and monitor arm

B. Phenolic resin lab table, No. 1533-52 / $710, shown with optional keyboard tray, drawer, casters, and monitor arm

C. Stainless steel worktable with backsplash, No. 1533-70 / $911, shown with optional wire shelf

D. Stainless steel worktable with backsplash and shelf, No. 1533-66 / $761, shown with optional casters

E. Electropolished stainless steel table with adjustable solid shelf (72" x 30"), No. 1305-01 / $1,111

F. Electropolished stainless steel table with 3-sided frame (72" x 30"), No. 1305-07 / $928

G. Electropolished stainless steel table with H frame (72" x 30"), No. 1305-13 / $928

A C

D

F G

B

E

MicroVac Cat. # $/Each

110VAC/60Hz 5100-00 1,003.00 220VAC/50Hz 5100-00-220 1,108.00MicroVacToolKit 5100-05 31.00ReplacementFilters Stage 1 Disposable Paper Bag 5100-01 85.00 Stage 3 Class 10,000 Filter 5100-02A 15.00 Stage 4 Class Replacement ULPA Filter 5100-04 165.00

Starsys Mobile Workcenters: byInterMetroMoving? Take your lab with you! Starsys lets you choose from an array of modular, mobile units to fit your changing work and space requirements.

• Fast, efficient lab installation• Easy reconfiguration• Flexible door, drawer and cabinet designs• Corrosion-proof, noncontaminating polymer

construction

Visit TerraUniversal.com for complete information!


CleanroomChairs

Class 100Static Control #2802-62



Class 100 #1013-08

Class 100 #1013-52

E – I. Class 100 & Static Control

Clean vinyl meets Class 100 particle requirements. Static-Control chairs feature dissipative vinyl, conductive casters, and grounding chains.

E F G H I

Specs Class100StaticControl Class100Height Color E. F. G. H. Color I.


DeskBlack 2802-61 504.00 2802-67 464.00 2802-73 520.00 1012-05 554.00 Black 1012-11 542.00Blue 2802-62* 504.00 2802-68* 464.00 2802-74* 520.00 1013-08 536.00 Black 1013-51 624.00

BenchBlack 2802-64 510.00 2802-70 467.00 2802-76 527.00 1012-41 454.00 Black 1012-12 542.00Blue 2802-65* 510.00 2802-71* 467.00 2802-77* 527.00 1013-12 536.00 Black 1013-52 624.00

* Quick ship models – usually ship within one week!


ErgoHeight™ Auto-Adjusting Cleanroom WorkstationsThis ergonomic workstation brings the work surface to any of four pre-selected heights at the press of a button—ensuring optimal worker comfort and eliminating back stress!

Its sealed design isolates the motor to minimize particle generation, making it compatible with Class 100/ISO 5 cleanliness requirements. Front-panel controls ensure easy operation. See TerraUniversal.com for other sizes and top materials.Benchtop Size Laminate Top Stainless Steel Top (W" x D") Cat. # $/Each Cat. # $/Each

36 x 30 3504-16 2,536.00 3504-04 2,952.00 48 x 30 3504-17 2,637.00 3504-05 3,052.00

Captions indicate models shown. Visit TerraUniversal.com for other sizes and styles.

Workstations and Chairs

Laboratory Stools

No. 2804-17$348.00

No. 2804-32$294.00

No. 2804-86$164.00

No. 2804-63$199.00 No. 2804-68

$203.00

J – N. Laboratory Chairs

Select from our large assortment of Laboratory Chairs. Types J-L are upholstered chairs built with ergonomic benefits. Types M and N meet durability and budget needs.

Ergonomic Upholstered#2801-05



Urethane#1013-16

Ergonomic ESD #1012-24

J K L M N

Specs ErgonomicUpholsteredChairs* Specs UrethaneChairs** ESDChairHeight Color J.w/SeatControl K.Standard L.LargeBackrest Color M. N.


Desk Black 2801-01 349.00 2801-33 301.00 2801-65 316.00Black

1013-16 277.00 1012-14 454.00Blue 2801-02 349.00 2801-34 301.00 2801-66 316.00 1013-17 327.00 1012-19 517.00

Bench Black 2801-05 396.00 2801-37 303.00 2801-69 320.00Black

1013-18 340.00 1012-24 517.00Blue 2801-06 396.00 2801-38 303.00 2801-70 320.00 — — 1013-46 599.00

* Available in Grade 2 Vinyl or Grade 4 Breathable Nylon. Visit TerraUniversal.com for more color options. ** More configurations available on the website.


Portable Airborne Particle CounterFeatures particle sensitivity down to 0.3 or 0.5 microns at 0.1 CFM flow rate. Select between two display modes: cumulative count (total particles) or differential count (particles in each size range). Models with built-in printer document particle counts in each size

range. Rechargeable battery ensures true portability. Other particle ranges available.

Particle CountersHPC600 6-Channel Particle CounterProvides the convenience of handheld operation and the printing and remote monitoring capabilities of a benchtop model. Internal memory stores up to 6000 measurements (1000 data sets). Provides six selectable channels continuously adjustable in 0.1 µm increments between 0.3 µm and 25 µm. Selectable sampling modes: cumulative, differential, concentration (counts/liter or /cu ft). Operates over 4 hours on rechargeable Lithium battery (AC adapter included). Includes one-year warranty.

Cat. # $/Each

HPC600 1510-30 2,974.00

Competes with unitspriced at $5,000

CleanroomWasteReceptacles CorrespondingRigidLinerType Capacity

(Gallons)DimensionsW x D x H (in.)

Ship.Wt.(lbs.)

304StainlessSteel Electropolished304StainlessSteel

Ship.Wt.

Cat. # $/Each Cat. # $/Each Cat. # $/Each

G 3.5 11 dia. x 17 H 9 1456-00 162.00 1456-15 454.00 3 1456-05 44.00H 7 12 x 12 x 17 19 1456-01 274.00 1456-16 619.00 4 1456-06 50.00I 12 12 x 12 x 23 24 1456-02 306.00 1456-17 792.00 5 1456-07 62.00J 24 15 x 15 x 30 36 1456-03 456.00 1456-18 958.00 7 1456-08 68.00K 40 19 x 19 x 30 48 1456-04 663.00 1456-19 1,147.00 8 1456-09 89.00

F – K. Electropolished Step Stools and LaddersInclude spring-loaded safety casters that retract under load. Perforations limit particle accumulation. Custom sizes and 316 SS available.

A – E. Cleanroom Waste Receptacles

Fabricated of 304 electropolished stainless steel, they provide years of constant service without contami-nation. Their no-spring foot pedal allows hands-free operation, and the tight-fitting, gasketed lid forms a nearly air-tight seal to contain waste safely.

B C D E A

F

K

All include removable liner

Polypropylene

304StainlessSteelStepStoolsandLaddersTop

PlatformOverall

DimensionsNo.ofSteps


(W" x D") (W" x D" x H") Cat. # $/Each

F 30 x 14 30 x 20 x 24 2 2805-50A-2 1,525.00G 30 x 12 30 x 28 x 34 3 2805-51A-2 1,948.00H 30 x 12 30 x 24 x 60 3* 2805-53A-2 2,195.00I 30 x 12 30 x 30 x 70 4* 2805-52A-2 3,297.00J 30 x 16 30 x 40 x 80 5* 2805-54A-2 4,067.00K 30 x 36 30 x 76 x 86 5* 2805-55A-2 4,260.00

* Includes safety handrail.QUICK

Ship

Cleanroom & Gowning Room: EquipmentandSupplies

G

Particles Ranges With built-in printer Without built-in printer(microns) Cat. # $/Each Cat. # $/Each

0.5, 0.7, 1.0, 5.0 1507-11 5,054.00 1507-14 5,054.000.3, 0.5, 1.0, 5.0 1507-17 5,868.00 1507-02 5,868.00

Note: Counter comes with two isokinetic probes (one hand-held with tubing and one direct mount), a purge filter for maintenance, two rolls of printer paper (for models with built-in printer), calibration certificate, and owner’s manual.


A. Washing/Drying StationIncludes an ULPA-filtered, heated overhead dryer and DI-water sink, both activated by an IR “photoeye” for clean, no-hands operation. Cat. # $/Each

One sink model 9600-05 5,814.00 Two sink model 9600-06 11,509.00 Four sink model 9600-07 21,706.00 Six sink model 9600-08 31,242.00

B. PureDry™ Cleanroom Hand/Glove DryerProvides warm, contamination-free air for drying hands and gloves. Dampened for quiet operation. Brushless DC Motor minimizes particle generation, and ULPA filter captures microcontaminants. Cat. # $/Each

120VAC/60Hz 3333-33 2,197.00 220VAC/50Hz 3333-33-220 2,197.00

Shown with 99.99% efficient HEPA filter kit

C. Motorized Shoe CleanerInternal vacuum system removes contaminants on shoes. Five internal brushes clean deep into seams, welts. Cat. # $/Each

110VAC, 50/60Hz 1784-00 2,719.00 220VAC, 50Hz 1784-00-220 2,973.00Exhaust HEPA Filter Kit 1784-13 425.00 (includes filter)

D. Cleanroom MirrorSturdy mirror-finished stainless steel frame mounts flush with wall to prevent particle accumulation.

Size Cat. # $/Each

Heavy Duty36" W x 72" H 5252-52A 1,073.0024" W x 36" H 5252-53 714.0018" W x 24" H 5252-54 504.00

Light Duty18" W x 24" H 5252-60 395.0024" W x 36" H 5252-61 395.0018" W x 36" H 5252-62 450.00 24" W x 30" H 5252-63 450.00

Standing, Double-Sided36" W x 72" H 5252-65 2,310.00

E. Sticky Mats®

Peel-off sheets eliminate the need for messy cleaning and make it easy to maintain a clean surface. All below are medium tack; many other styles available, as well as support frames. Dimen. Blue (full bottom) White (2" bottom) W" x D" Cat. # $/Each Cat. # $/Each

18 x 36 5601-16 44.00 5602-68 41.00 18 x 45 5601-17 51.00 5602-69 48.00 24 x 36 5601-18 59.00 5602-70 58.00 26 x 45 5601-19 74.00 5602-71 72.00 36 x 36 5601-20 87.00 5602-72 87.00 36 x 45 5601-21106.00 5602-73 103.00 36 x 60 5601-22158.00 5602-74 158.00

Shown with support frame

Cleanroom Mirror No. 5252-65

A

B C D

E

Most items shown here

Cleanroom & Gowning Room: EquipmentandSupplies


TypeA: Garment storage only.

TypeB: Garment storage and adjustable shelves (order desired shelf type separately).

TypeC: Adjustable shelves only (order desired shelf type separately).

TypeD: Includes two chrome-plated wire shelves adjustable in 1" intervals.

All models are fabricated of stainless or cleanroom powder-coated steel. All except type “C” are available with overhead HEPA filter/blower module that showers contents with particle-free air to dislodge and wash away contaminants.

No. 4205-00B, two shelves included

Now in Stainless Steel and Powder-Coated Steel Designs

Garment andSupplies Cabinets

Powder-CoatedSteel

No. 4101-09B with optional shelves

No. 4101-00B with optional hangersNo. 4101-04B with optional

hangers and shelves

(see stainless steel models on facing page)

Specifications Powder-CoatedSteelCabinets* CorrespondingShelvesType Outside


Powder-CoatedSteelw/AcrylicDoors

Powder-CoatedSteelw/Dissip.PVCDoors

PolypropyleneShelves

Powder-CoatedSteelShelves


A

Filter/Blower 36 x 20 x 94 4101-00B 2,833.00 4101-14B 3,468.00 — — — —Cabinet Only 36 x 20 x 78 4101-01B 2,008.00 4101-15B 2,643.00 — — — —Filter/Blower 36 x 24 x 83 4101-02B 2,599.00 4101-16B 3,236.00 — — — —Cabinet Only 36 x 24 x 67 4101-03B 1,779.00 4101-17B 2,415.00 — — — —

B

Filter/Blower 48 x 20 x 94 4101-04B 3,341.00 4101-18B 3,977.00 4101-30 41.00 4101-40A 77.00Cabinet Only 48 x 20 x 78 4101-05B 3,046.00 4101-19B 3,681.00 4101-30 41.004101-40A 77.00Filter/Blower 48 x 24 x 83 4101-06B 3,024.00 4101-20B 4,245.00 4101-31 41.004101-41A 77.00Cabinet Only 48 x 24 x 67 4101-07B 2,262.00 4101-21B 2,898.00 4101-31 41.004101-41A 77.00

CCabinet Only 30 x 14 x 78 4101-09B 1,400.00 4101-23B 1,971.00 4101-32 59.00 4101-42A 106.00Cabinet Only 30 x 18 x 78 4101-11B 1,463.00 4101-25B 2,035.00 4101-33 59.004101-43A 106.00Cabinet Only 36 x 20 x 78 4101-13B 1,590.00 4101-27B 2,161.00 4101-28 59.004101-44A 106.00

DFilter/Blower 37.75 x 26.5 x 86 4205-00B 3,385.00 4205-02B 4,264.00 AdditionalWireShelves(TypeD)Cabinet Only 37.75 x 26.5 x 72 4205-01B 2,657.00 4205-03B 3,385.00 36"W x 24"D Cat. # 1300-51$/Each 57.00

*Includes built-in stand with leveling feet.

A B

C D

HEPA-filtered models dislodge

and remove particles

Steel-reinforced doors with locks available on all models—ordering information at TerraUniversal.com


TerraUniversal.comMore Gowning Area Products —

QUICKShip

Closed Loop

Detachable

Fixed Position

A/B. UltraClean™ Cylinder Tube Garment Racks

Made of high-grade electropolished stainless steel, these racks feature sloping 11/2"-diameter cylindrical tube frames that are easy to wipe down. Fixed position design keeps garments firmly in place.See ordering chart below.

C. UltraClean™ Square Tube Garment Racks

These electropolished racks can be disassembled for easy storage and shipping. They are available with one or two hanger rods, in configurations for closed-loop or detachable hangers (photos C and D). See ordering chart below.

D. Fixed Position Hanger RodsThis style is available with square-tube racks. Slots at 3" increments keep garments from bunching together. Requires fixed-position hangers (photo G). See ordering chart below.

Cylinder Frame Rack(11⁄2"-diameter tubes)

Overall height: 76"For use with

detachable hangers.

Square-Tube Rack Sliding position style for use with closed-loop or detachable hangers.Overall height: 74"

ElectropolishedCleanroomHangerType ForRack

Type Cat. # $/Each

E C 1530-30-2 14.00F A,BorC 1530-31-2 14.00G A,BorD 1530-32-2 14.00 Fixed

position style

StainlessSteelGarment&SuppliesCabinets

Type D Stainless Steel Cabinet(No. 4101-80A, shown with one optional shelf)

(see powder-coated steel models on facing page)

ElectropolishedStainlessSteelGarmentStorageRacksType

See photos above

Dimensions HangerCapacity(order separately)

A/B.CylinderTubeFrame(order hanger 1530-32-2 separately)

C/D.SquareTubeFrame

SingleRack

DualRack

A.Single-Rack B.Dual-Rack Single-Rack Dual-RackCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each

C. Sliding Position(order closed loop

or detachablehangers)

48"W x 24"D 15 30 — — — — 9230-00-2 728.00 9230-04-2 1,227.0060"W x 24"D 19 38 — — — — 9230-01-2 853.00 9230-05-2 1,392.0072"W x 24"D 23 46 — — — — 9230-02-2 942.00 9230-06-2 1,547.0084"W x 24"D 27 54 — — — — 9230-03-2 1,045.00 9230-07-2 1,730.00

A. B. & D.Fixed Position

(order fixed positionhangers)

48"W x 24"D 15 30 9602-67 1,144.00 9602-75 2,247.00 9230-08-2 873.00 9230-12-2 1,716.0060"W x 24"D 19 38 9602-68 1,342.00 9602-76 2,551.00 9230-09-2 1,024.00 9230-13-2 1,946.0072"W x 24"D 23 46 9602-69 1,481.00 9602-77 2,838.00 9230-10-2 1,133.00 9230-14-2 2,168.0084"W x 24"D 27 54 9602-70 1,643.00 9602-78 3,171.00 9230-11-2 1,256.00 9230-15-2 2,422.00

Specifications GarmentStorageCabinets* ShelvesType Outside


StainlessSteelw/AcrylicDoors

StainlessSteelw/Dissip.PVCDoors

StainlessSteel


A

Filter/Blower 36 x 20 x 94 4101-57A 6,493.00 4101-68A 7,076.00 — —Cabinet Only 36 x 20 x 78 4101-58A 4,600.00 4101-69A 5,184.00 — —Filter/Blower 36 x 24 x 83 4101-59A 5,957.00 4101-70A 6,542.00 — —Cabinet Only 36 x 24 x 67 4101-60A 4,077.00 4101-71A 4,659.00 — —

B

Filter/Blower 48 x 20 x 94 4101-61A 7,658.00 4101-72A 8,241.00 4101-83A 233.00Cabinet Only 48 x 20 x 78 4101-62A 6,980.00 4101-73A 7,561.00 4101-83A 233.00Filter/Blower 48 x 24 x 83 4101-63A 5,766.00 4101-74A 7,398.00 4101-84A 233.00Cabinet Only 48 x 24 x 67 4101-64A 5,184.00 4101-75A 5,766.00 4101-84A 233.00

CCabinet Only 30 x 14 x 78 4101-65A 3,204.00 4101-76A 3,730.00 4101-85A 233.00Cabinet Only 30 x 18 x 78 4101-66A 3,352.00 4101-77A 3,876.00 4101-86A 233.00Cabinet Only 36 x 20 x 78 4101-67A 3,644.00 4101-78A 4,169.00 4101-87A 233.00

DFilter/Blower 37.75 x 26.5 x 86 4101-79A 6,208.00 4101-81A 6,852.00 — —Cabinet Only 37.75 x 26.5 x 72 4101-80A 4,866.00 4101-82A 5,402.00 — —

* Height includes built-in stainless steel stand with leveling feet.

A

B

E

F

G

C

D


A. Super Adjustable™ Wire ShelvesJust lift the release on each corner, adjust your shelf at precise 1"-increments, and clamp the release lever shut. In seconds, you can optimize your storage system to changing load requirements, with no tools, no wasted time, and no wasted space. For shelf grounding in static-sensitive applications, select conductive sleeves below.

Wall-Mount ShelvingOrder quantities indicated below to create an above-bench storage unit. Posts are 33.6"H and allow shelf adjustment. Metroseal 3 coating inhibits growth of bacteria, fungus and other microbes. Wall mounting hardware not included (varies according to wall type).

CleanroomShelving

More sizes available –www.TerraUniversal.com

Cat. # $/Pkg.

Replacement Sleeves/Wedges (pack of 4) 1571-00 4.00Conductive Sleeves (pack of 4) 1571-01 4.00

B. – C. Cleanroom Shelving with Split-Sleeve AssemblyThis InterMetro shelving is fabricated of noncontaminating, cleanroom-compatible materials. Order aluminum split sleeve for shelf grounding.

PlasticSplitSleeveAssemblyIncluded with each shelf.

AluminumSplitSleeveFor grounding type B/C shelves. Cat. # $/Pkg.

1303-70 8.00

A.SuperAdjustableWireShelvesDimensionsW x L (inches)

ChromePlated StainlessSteelCat. # $/Each Cat. # $/Each

18 x 24 1701-75 39.00 2650-35 131.0018 x 36 1701-76 41.00 2650-37 135.0018 x 48 1701-77 49.00 2650-39 160.0018 x 60 1701-78 56.00 2650-41 202.0021 x 24 1697-24 45.00 2650-43 151.0021 x 36 1701-79 48.00 2650-45 154.0021 x 48 1701-80 55.00 2650-47 178.0021 x 60 1697-28 65.00 2650-49 235.0024 x 24 1701-81 48.00 2650-51 163.0024 x 36 1701-82 51.00 2650-53 166.0024 x 48 1701-83 60.00 2650-55 200.0024 x 60 1701-84 71.00 2650-57 244.00

SiteSelect™PostsHeight(inches)

Stationary *MobileChromePlated

StainlessSteel

ChromePlated

StainlessSteel


14.5 1300-85 9.00 1300-91 18.00 — — — —34.5 1300-86 11.00 1300-92 28.00 1307-98 11.00 2650-01 28.00

54.5625 1300-87 13.00 1300-93 31.00 1307-90 13.00 2650-02 31.0062.5625 1300-88 14.00 1300-94 35.00 1307-91 14.00 2650-30 35.0074.625 1300-89 15.00 1300-95 40.00 1307-92 15.00 2650-03 40.0086.625 1300-90 19.00 1300-96 45.00 1307-93 19.00 2650-04 45.00

* Make it mobile – Select the mobile post from chart above. Casters available at TerraUniversal.com

B.SolidShelves C.WireShelvesDimens.W x L (in)

FlatStainlessSteel

ChromePlated

StainlessSteel


18 x 24 1301-06 133.00 1300-35 36.00 1300-64 128.0018 x 36 1301-08 136.00 1300-37 38.00 1300-66 132.0018 x 48 1301-10 166.00 1300-39 46.00 1300-68 157.0018 x 60 1301-11 202.00 1300-40 53.00 1300-69 199.0021 x 24 1301-12 151.00 1300-42 42.00 1300-71 148.0021 x 36 1301-14 154.00 1300-44 45.00 1300-73 151.0021 x 48 1301-16 188.00 1300-46 52.00 1300-75 175.0021 x 60 1301-17 235.00 1300-47 61.00 1300-76 232.0024 x 24 1301-18 163.00 1300-49 44.00 1300-78 160.0024 x 36 1301-20 166.00 1300-51 48.00 1300-80 163.0024 x 48 1301-22 200.00 1300-53 57.00 1300-82 197.0024 x 60 1301-23 244.00 1300-54 68.00 1300-83 241.00

Stainless Steel Antimicrobial Metroseal 3Cat. # $/Each Cat. # $/Each

Shelves (2*)18"D x 36"L 1300-66 132.00 1300-98 47.0018"D x 48"L 1300-68 157.00 1300-99 56.00

Shelf Supports (4*) 1306-74 47.00 1306-70 27.00Shelf Posts (2*) 2650-10 67.00 2650-09 39.00* Order quantity indicated in parenthesis to create one shelving unit

A

B

C


G

Available in other sizes and configurations

A. Polymer Utility Carts with Adjustable ShelvesMade of tough, chemical-resistant, high-density polyethylene, which provides excellent chemical resistance and wipes down easily. Raised “ship’s edge” lip (.44"/11 mm) contains spills. Height: 33.25" (other sizes and configurations available). Microban antimicrobial models available.2-Shelf Models Gray Blue W" x L" Cat. # Cat. # $/Each

18 x 28 1532-44 1532-12A 129.00 21.5 x 33.75 1532-49 1532-47A 140.00 27 x 39.5 1532-45 1532-13A 164.003-Shelf Models Gray Blue W" x L" Cat. # Cat. # $/Each

18 x 28 1532-50 1532-14A 152.00 21.5 x 33.75 1532-55 1532-53A 171.00 27 x 39.5 1532-51 1532-15A 200.00

B. Polymer “Deep Ledge” Carts with Adjustable ShelvesSimilar to models above, but with 2.75" (70 mm)-deep shelf ledges for enhanced spill containment. All models are 41"H. Color: Blue. W" x L" Configuration Cat. # $/Each

21.5 x 32.75 2-shelf 1532-56 146.00 21.5 x 32.75 3-shelf 1532-57 180.00 27 x 38.75 2-shelf 1532-58 171.00 27 x 38.75 3-shelf 1532-59 210.00

C. – F. Utility Carts see below

G. MetroMax Utility CartsHigh-strength reinforced polymer allows weight capacity of 600 lbs and removable grids provide easy cleaning. All shelf mats contain Microban antimicrobial polyethylene. W" x L" x H" Configuration Cat# $/Each

18 x 30 x 40 2-shelf 1403-03 462.00

Three-Shelf Cart (No. 1532-53)Microban® AntimicrobialFormulation Available!

Series 400 – Two chrome wire shelves and one stainless steel solid shelf.

Series 100 – Two stainless steel solid shelves (see chart below)

OrderingInformation C.Series100 D.Series200 E.Series400 F.Series600Dimensions(W" x L" x H")

CasterDia. Cat. # $/Each Cat. # $/Each Cat. # $/Each

StainlessSteelWireShelves

18 x 24 x 38 4" 1401-23 394.00 1401-44 501.00 1401-54 269.00 1402-39 369.0018 x 30 x 38 4" 1401-24 425.00 1401-45 548.00 1401-55 291.00 1402-41 400.0018 x 36 x 38 4" 1401-25 445.00 1401-46 577.00 1401-56 304.00 1402-43 421.0021 x 36 x 39 5" 1401-26 481.00 1401-47 628.00 1401-57 332.00 1402-45 471.0024 x 36 x 39 5" 1401-27 509.00 1401-48 667.00 1401-58 350.00 1402-47 497.00

A

E

C

Series 600 – Two wire shelves, chrome or stainless steel

Three-Shelf Deep-Ledge Cart (No. 1532-57)Microban® AntimicrobialFormulation Available!

Series 200 – Three stainless steel solid shelves (see chart below)

F

B

D

Will not corrode!


Carts: forLaboratoryandCleanroom

Controlled Storage

•Automatesdrybenchtopstoragetoeliminatemoisture-relateddegradationandoptimizeyields

•First-of-its-kindgascontrolsystemconservesnitrogen!

•Fullyintegratedturnkeysystemtakes30secondstoinstall

Miniaturized LED monitors humidity and

displays set point

Seconds to install and

program!

Reduces nitrogen cost

by 78%!*(shelves and door frames optional)Acrylic SmartDesiccator™ No. 1911-41

Electropolished Stainless Steel SmartDesiccator™

SmartDesiccator™Benchtop Storage System

Cuts Nitrogen Costs, Increases Efficiency!

Portable PC docking station

Miniature LEDs display current humidity and

RH set point

• Increasesdesiccatorefficiencyupto400%tominimizenitrogenwasteandmoistureexposure

• Sensesanddisplaysrelativehumidityineachdesiccatorchamberindependentlyformoreefficient,cost-effectivemoisturecontrol

• Cutsnitrogenexpensesbyover75%

• Preventsmoistureandcontaminationmigrationfromonechambertoanother

• Letsyouspecifyadifferenthumiditysetpointforeachchamber

• Automaticallydeliversahigh-flownitrogenpurgeonlytothechamberwhereit’sneeded,andonlyaslongasit’sneededtorestoreRHsetpoint

• CanbeintegratedintoalmostanyTerradesiccatorline

NitroPlex™ Humidity Control System

Model shown: No. 3950-36NP, with ten (10) control modules (No. 1911-31) and optional SmartPlex™ computer, stainless steel door frames, and stand.

ElectropolishedSSSmartDesiccator™ Cat. # $/Each

1911-02C 2,941.00

AutomaticRB®(Relief/Bleed)Valve Cat. # $/Each

One required per cabinet for safe operation. 1600-60B 94.00

Sensor/Display Modules (one/chamber). Allow multiplexed humidity control

PlasticSmartDesiccators™(Seeaboveforstainlesssteel) Shelf DoorFrameChambers Overall

Dimensions(W x D x H)

Materials Perf.StainlessSteel

304StainlessSteelAcrylic DissipativePVC


1 12" x 12" x 13.25" 1911-15D 1,256.00 1911-21D 1,424.00 1935-02 89.00 2200-14A 85.001 17.12" x 18" x 13.25" 1911-45A 1,482.00 1911-46A 1,897.00 1976-02 127.00 2200-61A 133.001 22.62" x 18" x 13.25" 1911-43A 1,612.00 1911-44A 2,112.00 1977-02 142.00 2200-60A 152.001 22.62" x 24" x 13.25" 1911-41A 1,717.00 1911-42A 2,306.00 1978-02 159.00 2200-60A 152.002 17.12" x 18" x 25.25" 1911-16D 1,825.00 1911-22D 2,519.00 1976-02 127.00 2200-70A 152.002 22.62" x 18" x 25.25" 1911-17D 1,970.00 1911-23D 2,872.00 1977-02 142.00 2200-71A 172.002 22.62" x 24" x 25.25" 1911-18D 2,204.00 1911-24D 3,187.00 1978-02 159.00 2200-71A 172.00

* Acrylic is damaged by alcohol and other cleaning agents.


Nitrogen and Dry Air Generators

Purity: 99% 98% 97%No. 2700-12A 7.4 CFH 10.2 CFH 12.5 CFHNo. 2700-11A 49.0 CFH 65.0 CFH 75.0 CFHNo. 2700-09A 126.0 CFH 180.0 CFH 223.0 CFH* Higher flow rates can be achieved with higher feed

temperature (see Terra’s process gas heater, No. 9450-00).Dryex 80™C

End Plate

Epoxy Tube Sheet

O-RingsFeed Air

Support Core

Hollow Fibers

Enriched NitrogenProduct Gas

Outer Case

Oxygen-Enriched Air

ComparativeGuidetoTerraGasDryersProduct Design

TypeOutletFlow

CapacityService

RequirementPrefiltersIncluded

OverallDimensions

(W x D x H)

RecommendedApplication

Cat. # $/Pair

A.NitrogenGenerator Membrane See performance

chart aboveAir Compressor

(#9505-47)Yes

(micro-fiber& coalescing)

18 x 18 x 81.25 Gloveboxes, desiccators & N2-based process equipment in labs where N2 is preferable to dry air

2700-09A 12,269.0024 x 12 x 49.25 2700-11A 6,217.0020 x 12 x 35.5 2700-12A 3,782.00

B.Dryex80™GasDryer

Seepage17Membrane 420-900 SCFH Air Compressor

(#9505-43)Yes

(micro-fiber & coalescing)

24 x 12 x 49.25Low-humidity applications (in gloveboxes or desiccators) where clean, dry air is acceptable

9082-00 4,153.00

C.Dryex10™ Membrane 54-105

SCFH @100 PSIG

Air Compressor(#9505-43)

Yes (micro-fiber

& coalescing)16 x 7.25 x 6.5

Ideal source of purged gas in moisture-sensitive storage and processing applications

9082-01 2,331.00

No.2700-11A No.2700-12A A

Terra’s gas generators and gas dryers provide several ways to produce a dry, particle-free environment inside glove boxes, desiccators, and other enclosures.

Nitrogen GeneratorSeparation Membrane– Reliable, Hassle-Free Nitrogen Source!

Nitrogen Generators

Purity vs. Flow Rates

(@100 PSI inlet feed, 72°F*)

BioZone™ Controlled Environment Isolation Chambers

Laminar Flow Processing Environments, and More —• HEPA/ULPAfiltrationsystems

providelaminarflowofparticle-freeair

• Stabletemperaturefrom18°Cto38°C(±0.5°C),perfectforahostofbiopharmaceuticalprocesses,includingbiocompatibilitytestingandincubation

• Humidification/dehumidificationmodulesavailableforstableRHcontrol

• Biocide-resistantstainlesssteelconstructioncreatestheidealasepticprocessingenvironment

• Largeprocessingareaandspaciousaccesswindowsaccommodatesmicroplatereadersandfillers,PCRsystems,incubators,automaticfillersandotherbulkyequipment

BioZone™ 4000

Provides vertical flow of HEPA-filtered air and constant-temperature to 38°C (±0.5°C). Working area features one, two or three 40"W processing zones, each with independent access and temperature control.

BioZone™ 7200Vertical laminar flow enclosure is available with constant temperature and humidity control systems to provide a clean, sterile controlled environment for automated processing equipment. Equipment control integration available; call to discuss your requirements.Customizationisnoproblem—

calltodiscussyouruniquerequirements!


Laminar Flow Stations

• HEPA/ULPA-filteredenclosureprovidesaclean,static-safeworkenvironment

• Verticalandhorizontalflowstationsavailablewithpowder-coatedoreasy-cleanstainlesssteelfinish

• Hundredsofstandardsizesandconfigurations,withmodificationstohandleanyapplication!

Vertical Laminar Flow Station, No. 2001-83A, shown with optional cleanroom bench No. 2402-00

Model shown: No. 9620-64For complete specifications: TerraUniversal.com

Return air ducts minimize turbulence and backwash

Available with Anti-microbial coatings for enhanced germ control.


A. ValuLine™ Laminar Flow WorkstationsThis low-cost, completely integrated workstation includes a powder-coated or stainless steel frame, stainless steel work surface, and laminar flow HEPA filtration module with tilting sash, fluorescent light, and backpressure gauge. Several sizes available, starting at under $4,000.

B. ValuLine™ WhisperFlow™ Benchtop Laminar Flow Hood

This all-polypropylene laminar flow hood provides a vertical flow of HEPA-filtered air to the work bench. Order desired work surface separately. Integrated polypropylene bottom include raised lip to capture chemical spills. Many sizes available.

C. CleanBooth™ Laminar Flow StationThis modular system includes a stand that support HEPA filtration modules. Select vinyl side panels, casters, and desired work surface separately.

ValuLine™ Workstation No. 2001-68: Complete system includes frame, workstation and hood

ValuLine™ WhisperFlow™ Hood No. 1688-40: Polypropylene HEPA-filtered enclosure under $2,000

CleanBooth Laminar Flow Hood No. 1870-02, with side curtains and FFUs

C

A B

OptionalUVSanitizingSolutionsUV-C lights provide 99+% bacterial and viral disinfection.

ValuLine™ Laminar Flow Hoods and Workstations


No. 1694-03B, shown with optional pass-through vacuum oven and low-humidity controllers

No. 1694-13B, shown with optional Dual Purge System, Vacuum Antechamber and Control Module

Series 100 Polymer GloveboxesTerra’s Series 100 Polymer Gloveboxes provide a clean, low-humidity environment for critical processing operations. Their modular design lets you select the options you need for your application.

Dual side access doors open inward to allow easy parts transfer from inside the chamber. Doors feature stainless steel reinforcement frames that increase the structural rigidity of the door by a factor of five. A built-in LiftLatch securely seals the door without applying lateral torque that could damage hinges.

Series 100 Plastic Glovebox

Series 300 Stainless Steel GloveboxThe ideal isolation enclosure for a wide range of operations requiring control of particles, humidity, and temperature. Select among several different sizes for one or two operators. Automatic humidity control systems regulate a purge of process gas to maintain user-determined %RH set point. Available in many configurations, with air locks, pass-through ovens, ionization, humidification and sterilization modules.

Perfect for parts degassing, temperature and humidity testing, chemical mixing, and other processes requiring a non-reactive environment.Systemstartsat$5,785.00

Air Lock Provides

Convenient Access.

Series 400 Stainless Steel GloveboxLike the Series 300 chamber shown at left, this isolation glovebox protects delicate materials against particles, humidity, static discharge, and other environmental threats. Its larger chamber size accommodates Terra’s Vacuum Antechamber, which provides a practical way to remove moisture as items are moved in and out of the main processing chamber.

Choose between single and twin models, with right or left-side air locks. Custom modifications are available on all Terra gloveboxes; just let us know your requirements!Systemstartsat$9,500.00

Series 100 gloveboxes are available in five materials:

Acrylic — strong, rigid material offers full visibilityStatic-Dissipative PVC — protects against static discharge and eliminates static attractionsNon-Dissipative PVC — resists a wide range of chemicals, including most disinfectantsPolypropylene — ideal for chemical mixing or use with acidsPolycarbonate — strong and resistant to chemical and thermal shock

Select among a full range of options for control of particles, static charges, and humidity.Systemsstartat$1,301.00

Acrylic chamber No. 1689-00D

Series 100 Acrylic Glovebox, shown with optional filtration module and air lock.

Polypropylene No. 1681-29D

Gloveboxes: IsolationandContainmentChambers


No. 1694-33A (two linked together) No. 9670-00A, shown with right-side air lock

Radius corners simplify cleaning, eliminate seams and cracks

Insulated chambers available

Series 500 Full-View GloveboxThis enclosure features transparent front and back panels, made of static-dissipative PVC or polycarbonate, with opposing glove ports for convenient dual-side access to work in progress. This design combines full chamber visibility with the strength of a stainless steel glovebox.

It features a large chamber—up to 96"W x 36"D x 30"H—for work with bulky process equipment. A full range of controller systems provides protection against particles, static charges, and humidity. Terra’s smart gas controllers regulate the purge of nitrogen or other process gas to maintain the humidity set point you require. Systemsstartat$6,985.00

Series 600 Front-View GloveboxThis chamber provides a sloping front panel of transparent polycarbonate or safety glass for full visibility of work in progress. Like the Series 500 model at left, it accommodates Terra’s complete line of environmental control systems to automatically maintain a particle-free, controlled-humidity, static-safe environment. Multiple chambers can be cascaded together to expand working space. Standard chamber size: 37.5"W x 29"D x 39"H.Systemstartsat$8,693.00

Refrigerated GloveboxIdeal for many testing and processing applications, Terra Universal’s Constant Temperature Control System incorporates heating and refrigeration modules that maintain a stable temperature between -25°F and 120°F inside a fully integrated glove box. The complete system consists of a compressor/condenser, a heater, and an evaporator cooler with an integral fan mounted inside the chamber. The closed-loop refrigeration unit operates with CFC-free coolant and uses a RTD sensor with an internal bypass to prevent temperature overshoot. The sensor provides continuous temperature display, and a standard controller allows the user to establish a constant temperature set point. PLC-based recipes are available for multiple temperature cycles.Fullyintegratedsystemsstartunder$18,000.00

Series 300 Glovebox with Constant Temperature Module No. 1694-75

BioSafe™ Stainless Steel GloveboxThis glovebox features smooth, ultra-clean interior surfaces that eliminate germ traps, making it ideal for aseptic requirements. Continuous-seam welds and rounded corners create a hermetically sealed enclosure that’s easy to clean and sterilize. Tempered glass or polycarbonate viewing windows afford full chamber visibility, and optional side air locks allow convenient parts transfer. Optional access panels are available for transfer of large process equipment. Select between two sizes, with either polycarbonate or safety glass viewing window.Systemstartsat$18,514.00

Insulated chambers available

Anti-Microbial Coatings Available!– Ask about Terra’s latest innovation for aseptic processing.

Gloveboxes: IsolationandContainmentChambers


Safety Products

Enclosed Safety Shower• Providesfull-bodyshowerandeyewashwhileprotectinglab

againstwaterandchemicalsplashes

• Polypropyleneenclosureresistsmostlabacidsandcorrosives

•Easy-partingtransparentvinylcurtainallowsfast,convenientaccesswhileshieldingtheexternalenvironment

• Immediate-responseoperationhandlesareeasytoactivate

Terra’s safety shower combines easy, reliable operation with a fully enclosed design that enhances safety both inside and outside the shower area.

The polypropylene shell resists most laboratory acids and corrosives. By shielding the shower on three sides, it minimizes the chance of the water spray—or of harmful chemical splashes—affecting parts or personnel outside the shower. The 40 mil overlapping vinyl strip curtain on the front is easily parted for quick entry into the enclosure.

All eye rinser hardware is zinc-plated. The standard overhead nozzle height is 78" off the shower floor; the eye rinsers are positioned 42" off the floor. The shower comes complete with PVC plumbing that connects to your in-house water supply by means of a 1.25" ID pipe fitting. The sloping bottom feeds into a 2.5" drain line. Dimensions: 38"W x 41"D x 90"H. Complete specifications at TerraUniversal.com. Cat. # $/Each

1530-50 6,857.00

PureAir Bio-Response Kit —Powered Air Purifying Respirator (PAPR)The PureAir PAPR system delivers a constant top-down flow of purified air into the head cover, providing positive airflow and protection against biological and particulate contamination. It incorporates U.S. military-proven lightweight motor blower technology for optimal performance and mobility. Easy to store and deploy, the PAPR kit includes a respiratory blower, two high-efficiency particulate filters, airflow indicator, web waist belt assembly, and (4) D-cell battery pack with PureAir adapter (batteries not included). Order breathing hose and head cover separately. NIOSH approved (TC-21C-0788).

Other options available at TerraUniversal.com

Sure-Grip® EX Safety Can Storage CabinetsDesigned to meet OSHA and NFPA standards, these cabinets are sturdily constructed of all-welded, 18-gauge, double-walled steel with 1.5" of insulating air space for fire resistance. They include spill-slope safety shelves adjustable on 3" centers and dual vents with built-in arresters. All models shut and latch automatically when fusible links melt at 165°F (74°C) under fire conditions. Patented, concealed closing mechanism in self-close style maximizes available shelf space and minimizes risk of damage to the mechanism.

U-Loc™ padlockable paddle handle with slip resistant grip offers easy fingertip operation and reduces dangerous “catches” from passing traffic. Haz-Alert™ reflective labeling bursts with high visibility when illuminated by a flashlight beam, ensuring visibility of hazardous warning message. Sturdy galvanized steel SpillSlope™ shelves safely direct incidental spills to the back and bottom of the leak-proof sump. Includes leveling feet, grounding connector, and hazard warning in three languages. Backed by a 10-year warranty.

Capacity(gal.)

Dimensions(W x D x H)

ApprovalListing*

Doors/TypeCat. # $/Each

30 43" x 18" X 44" FM, N, O 2 / manual 2800-00A 475.0030 43" x 18" X 44" FM, N, O, U 2 / self-closing 2820-00A 531.0045 43" x 18" X 65" FM, N, O 2 / manual 2820-02A 588.0045 43" x 18" X 65" FM, N, O, U 2 / self-closing 2820-03A 646.0060 34" x 34" X 65" FM, N, O 2 / manual 2820-05A 708.0060 34" x 34" X 65" FM, N, O, U 2 / self-closing 2820-06A 770.00

* See key at left.

Approval Listing and Regulation KeyFM Factory Mutual tested and approvedN Designed in accordance with National Fire Protection

Association (NFPA) code 30 regulationO Complies with OSHA regulationsU Complies with Uniform Fore Code

No. 2820-00A and No. 2800-00A

Ventilation model available for vapor removal.

Cat. # $/Each

PureAir Bio-Response Kit 2821-00 561.00Breathing Hose White 2821-01 35.00

Black 2821-20 29.00Head Cover (Regular, large available)

Visor 3-pack 2821-03 107.00Cape 3-pack 2821-05 198.00


Refrigerators: byMarvelScientific

A. ADA-Compatible RefrigeratorMarvel Scientific’s ADA compliant refrigerator fits under 32" countertops and may be built into casework with zero clearance or used as free standing. The units are designed to comply with the Americans with Disabilities Act (ADA) for accessibility by adhering to strict height standards.

B. Space-Saver Undercounter RefrigeratorThis Marvel Scientific 3.0 cu.-foot undercounter refrigerator is a real space saver at just 15 inches wide and comes with three full-depth adjustable shelves. The fan-cooled interior insures uniform temperature front to back and bottom to top, which is controlled by an adjustable microprocessor-based thermostat.

C. Undercounter FreezersMarvel’s undercounter freezers come in 4.5 cu.-ft and 6 cu.-ft. models that fit easily under lab benches and casework. The standard version features forced air ventilation, eliminating the need for clearance space for built-in applications. Also available are flammable materials and explosion-proof undercounter freezers.

A B

C D

D. Undercounter RefrigeratorsThese 6.1-cubic-feet refrigerators fit easily under lab benches and casework. The standard version is available with either a solid or glass door. The flammable materials refrigerator meets NFPA Standard 99 and complies with OSHA. The explosive-proof refrigerator is listed by Underwriters Laboratory.

E. Two-Drawer Undercounter Refrigerator

Marvel’s new two-drawer model is the first undercounter drawer refrigerator on the market that is Commercial UL-Listed for laboratory use. Two deep, full-extension drawers store nearly all types of containers and provide superior visibility and access, even when seated.

Type Exterior Dimensions H x W x D (in.) Temp Range (ºC) Capacity (cu. ft.) Power** Cat # $/Each

A. ADA Compliant Refrigerators General Purpose 31.5 x 23.875 x 24.375 1º to 7º 5.4 115V 2860-06 1,287.00B. Space Saver Refrigerators General Purpose* 34.25 x 14.875 x 23.625 1º to 6º 3.0 115V 2860-00 1,174.00

C. Undercounter FreezersGeneral Purpose 34 x 23.875 x 24 -23º to -18º 4.5 115V 2860-09 1,014.00Explosion-Proof 34 x 23.875 x 26 -18º to -15º 4.5 115V 2860-10 2,249.00Flammable Material 34 x 23.875 x 26 -18º to -15º 4.5 115V 2860-11 2,213.00

D Undercounter RefrigeratorsExplosion-Proof 34 x 23.875 x 26 1º to 7º 6.1 115V 2860-04 1,836.00Flammable Material 34 x 23.875 x 26 1º to 7º 6.1 115V 2860-05 1,803.00

E. Two-Drawer RefrigeratorStainless Steel 34 x 23.875 x 24.25 0º to 7º 5.6 115V 2860-08A 1,802.00White Powder-coated 34 x 23.875 x 24.25 0º to 7º 5.6 115V 2860-07A 1,703.00

* Available with glass doors.** All models are available in 220V. Visit TerraUniversal.com for more information.

E

E

No. 2860-06Space Saver shown with solid and glass doors.

No. 2860-09No. 2860-08No. 2860-03


Hot Plates: byThermoScientific

Explosion-Proof Hot PlateThis corrosion-resistant, easy-to-clean unit is specifically designed to ensure safe heating in potentially explosive situations! The cast-aluminum top plate provides effective heat transfer, and all controls are contained in an aluminum housing, protected from the explosive atmosphere. Heating surface: 6" x 6". Temperature range: to 220°C (428°F). Cat. # $/Each

Hot Plate 4000-92 843.00

Cimarec® Digital Hot Plates/Stirrers Rugged aluminum 7" x 7" surfaces provide uniform heating. Microprocessor-controlled feedback maintains consistent, repeatable temperature. The easy-to-read display indicates temperature settings, adjustable up to 300°C. StirTrac™ technology improves slow-speed stirring. Cat. # $/Each

120V Stirring Hot Plate 4100-04 416.00

Ceramic tops also available in 3 sizes

Super-Nuova® Digital Hot Plates/StirrersPremium aluminum-top stirring hot plates provide precise digital control of top plate and solution temperatures in 1° increments. Four user-presets call up often-repeated procedures. Magnetic stir bar provides vortex motion to evenly disperse solution and/or heat. Heating surface: 7" x 7". Ceramic top models are also available. Cat. # $/Each

110V Stirring Hot Plate 4100-07 858.00

Ovens and Environmental Chambers

Class 100 Cleanroom OvenFour-segment programmable controller provides precise heating to 250°C. Models below include HEPA filters use in Class 100 (ISO 5) cleanrooms. Interior walls are stainless steel, with stainless steel bottom and sidewall plenums. Delrin hinge pivots eliminate metal-on-metal surfaces. Model below is 120VAC; 240VAC models also available. Includes 2"-dia. exhaust vent, .125" NPT fitting for introducing inert gas or house air, and four adjustable stainless steel shelves. Chamber size: 2.8 cu. ft. Cat. # $/Each

3700-70 8,992.00

Large-Capacity Forced-Air OvensPID temperature controls provide stable heating to 220°C, and a unique turbo blower system creates true one-pass circulation pattern for optimal uniformity and fast recovery time. Includes an electronic digital timer with large LED display and overtemperature protection and isolated heating elements. Chamber interior is stainless steel. Models below are 120VAC. Chamber Size Cat. # $/Each

14.0 cu. ft. 3700-85 5,017.00 28.0 cu. ft. 3700-86 5,330.00

Environmental ChambersMicroprocessor-controlled chambers provide precise control over environmental conditions for repeatable results. Refrigerated Incubators provide precise temperature control from 5°C to 60°C. Stability Chambers add a relative humidity system with solid-state humidity sensor and controller that allow humidification and dehumidification for operation from 20 to 98%RH. All incorporate environmentally friendly HFC refrigerant and CFC-free insulation. Light packages and chart recorders are optional.Models below are 115VAC; 230VAC also available. 10 Cubic-Foot Capacity Cat. # $/Each

Refrigerated Incubator 5757-03 11,700.00 Stability Chamber 5757-05 14,947.00


Sample Preparation Products: byBenchmarkScientific

BlotBoy™ and Mini-BlotBoy™ RockersThese platform rockers provide the perfect 3-dimensional motion for all blot-related applications. Their tilt angle and speed are set for optimal gentle but thorough mixing in gel trays, boxes and other flat vessels. Both models include brushless motors and autoclavable flat mats. They are ideal for blot washes and gel staining/destaining and safe for use in cold rooms and incubators. They accept stackable platforms and handle loads up to 2 kg. Both are 110VAC. Cat. # $/Each

BlotBoy™ Rocker BR02-01 327.00 Mini-BlotBoy Rocker BR02-00 308.00

Hot Plate/StirrerThis hotplate/stirrer features a durable, chemical resistant 7.5" x 7.5" ceramic work surface and a compact, space-efficient design. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment of speed (60 – 1500 rpm) and temperature (to 380°C). Comes complete with support rod for mounting thermometers and temperature probes. Hot plate and stirrer models also available at TerraUniversal.com. Cat. # $/Each

Hot Plate/Stirrer (110VAC) BR05-00 307.00

MyBlock Mini Dry BathBenchtop control of sample temperature has never been this easy or economical. The new MyBlock™ Mini fits almost anywhere and can even be used “on-the-go” in cars, boats or wherever a 12 volt power source is available. Its simple touch pad control with digital display is designed for “set and walk away” temperature selection and unrivaled accuracy. At less than 4.4 inches wide, MyBlock™ Mini is truly the first personal block incubator. Cat. # $/Each

MyBlock Mini BR10-00 180.00 12V vehicle power adapter BR10-07 32.00

Orbi-shaker with MAGgic Clamp platform by Benchmark Scientific

(Orbi-Shaker Jr. not featured)

Cat. # $/ Each

Orbi-Shaker BR09-12 1216.00MAGic Clamp for Orbi-Shaker BR09-09 176.00Orbi-Shaker Jr. BR09-00 710.00MAGic Clamp for Orbi-Shaker Jr. BR09-01 176.00

Orbi-Shaker and Orbi-Shaker Jr. The Orbi-Shaker™ is capable of mixing a 14 lb load capacity up to speeds as high as 300 RPM. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays. The Orbi-Shaker Jr.™ is a space-saving shaker, complete with a 9.5 x 8 in. non slip, rubber coated platform that is ideal for tissue culture flasks, petri dishes and staining trays. Additional platforms are also available, including the MAGic Clamp™ platform, a unique, magnetic attachment method creates an easy way to instantly change between flask clamps of different sizes.

MyFuge™ Mini by Benchmark Scientific

The new MyFuge™ Mini centrifuge is a personal centrifuge designed to be easy to use and save space.

Ideal for quick spin downs of microtubes and PCR tubes. The rotor instantly reaches 6,000 rpm

once the lid is closed. Open the lid, and the rotor quickly decelerates for

removal of samples. An eight-position microtube rotor is

included and comes installed. A second rotor for 0.2 ml PCR tubes and strips is also included and stored with the rotor removal key in a convenient compartment on the bottom of the centrifuge. Storage in this compartment prevents loss or misplacement of the rotor when not in use.

Cat. # $/Each

MyFuge Mini: Red BR04-05 200.00 MyFuge Mini: Blue BR04-06 200.00 MyFuge Mini: Clear BR04-07 200.00

Cat. # $/Each

MyFuge Mini: Green BR04-08 200.00 MyFuge Mini: Purple BR04-09 200.00


Top-Vented, Horizontal Electrophoresis KitThis general-purpose gel box is ideal for both extended high-resolution, linear runs and economical quick screens. It is equipped with recirculation ports for procedures requiring buffer recirculation. Durable cast acrylic withstands high voltage and extreme temperatures without cracking or warping, as molded units do.

Gel Box includes 16.5 cmW x 30.5 cmL x 7.0 cmH gel box with vented lid (10 cm x 15 cm gel dimensions), UV transmittant casting tray with casting fixture system, power cords, bubble level, buffer ports, adjustable feet, and two 2.0 mm x 16-tooth combs.

Many horizontal systems available— visit TerraUniversal.com for full information

Biowave DNAUV/Vis SpectrophotometerSpecifically designed for life science applications, this powerful tool determines nucleic acid purity and concentration, protein concentrations or cell density measurements. It uses Gifford Optics for high energy throughout, a Xenon light source for long lamp life and a large graphical display for easy of use and data interpretation. Compatible with low-volume cuvettes. Cat. # $/Each BiowaveDNA 5300-15 3,986.00 BiowaveDNAwithprinter 5300-16 4,469.00

S800/S1200 SpectrawaveVisible Diode Array SpectrophotometersThese compact, lightweight, easy-to-use instruments measure absorbance, % transmission, absorbance ratio and concentration. The large backlit graphical display of the S1200 enables viewing of wavelength scans, kinetic assays (including slope calculation) and standard curves. Both models accept standard 10 mm pathlength glass or plastic cuvettes; an adapter is available for 10, 12, and 16 mm test tubes. Cat. # $/Each S800 UV/Vis 5300-09 1,834.00 S1200 UV/Vis 5300-10 2,192.00

CO 8000 Biowave Personal Cell Density Meter (Colorimeter)This small, portable colorimeter measures the density of E. coli and yeast cells in suspension at 600 nm and provides readings comparable to spectrophotometers. Ideal for use in research labs where cultures may be grown in 200 ml to 5 L volume conical flasks. Because it accepts 10 mm pathlength cuvettes or tubes, it may be used with Erlenmeyer side arm flasks. Smooth front surface resists spills and is easy to sterilize. Stores up to 99 results. Cat. # $/Each 5300-06 694.00


Analytical Instruments

More Products for Your Lab

Inca Personal Microplate IncubatorProvide reliable, accurate incubation of single microplates. Unique design and advanced electronic temperature control guarantees stable, quiet performance. Features variable temperature control, temperature or elapsed time display and built-in timer. Safe 12V operation. Accommodates all plate sizes. Cat. # $/Each

8000-16 845.00

Branson Sonifier® Cell Disruptors• Auto tuning for optimum performance

• Pulsed mode to minimize heat generation in thermally-sensitive samples

• Continuous or timed operation

The Sonifier® ultrasonic cell disruptors are designed to apply high-frequency ultrasonic energy to disrupt cellular structures, homogenize samples, emulsify materials, mix compounds and accelerate reactions. These cell disruptors can process static samples from 1 ml to greater than 500 ml or flowing material up to 40 l/hr. Each model consists of a power supply, converter, and mechanical probe.

Model* Output Cat. # $/Each

250 Analog 200 Watts 2601-01 2,249.00450 Analog 400 Watts 2601-02 2,529.00250 Digital 200 Watts 2601-03 2,523.00450 Digital 400 Watts 2601-04 2,784.00

*Also available in 230V, 50/60Hz

LAMBA Bio+ Spectrophotometer from Perkin ElmerThe LAMBA Bio+ has been specifically designed for life-science laboratories that require a dedicated instrument for the determination of nucleic acid purity and concentration, protein concentrations and cell density measurements. A full suite of stored methods include DNA, RNA and Oligonucleotide calculations, protein assays such as direct UV measurement, BCA, Biuret, Bradford and Lowry. Unlike many dedicated life-science spectrophotometers, the LAMBA Bio+ can also measure absorbance or concentration at any wavelength, providing flexibility to address future applications. All results may be printed to an integrated high quality printer or stored and printed via SD flash memory card. Cat. # $/Each

LAMBDA Bio+ with printer 5102-02 6,426.00LAMBDA Bio+ with SD Card 5102-03 6,324.00

Millennium 2000 Microplate Shaker Incubator from Jencons Scientific• Minimum bench space required

• Easy to clean and maintain

• Optimal temperature uniformity of plates

The Millennium 2000 is a unique controlled microprocessor that accommodates up to four microtitre plates in either 96- or

384-well format. Speed, temperature and time are programmed via the control panel with an easy to read LCD displaying all three parameters. All four plates are easy to access at all times for loading and unloading. For added safety, the Millennium 2000 works from a low voltage supply. Cat. # $/Each

8000-11 5,206.00

Full line of microplate readers, shakers, and incubators available!


Electronic Pipettors: byBiohit

The Ultimate in Precision and Ergonomics• Widerangeofstylesandconfigurationsmeets

diverserequirements

• Ergonomichandfit,lightweight,andelectronicstartbuttonensureeaseofuseandreducefatiguewithbothrightandleft-handuse

• Electronicoperationensureshighaccuracyandrepeatability

• DesignedandmanufacturedtotherequirementsofISO9001,ISO13485,andISO14001

• After-salesupport,includingcalibrationservicestoISO17025

• Completelineofoptionsincludestips,multi-unitrechargersanddispensingstands

All units operate using rechargeable HiMH batteries (charging stands available). Visit TerraUniversal.com for complete ordering information on these and many other electronic pipettors!

Compare Pricing!

eLINE DispensereLINE hands you a familiar but unique approach to a new, more comfortable world of multiple dispensing. Electronic eLINE dispenser is a part of the Biohit’s eLINE family. The range of automated liquid handling operations offer the most ergonomic and accurate capabilities for any dispensing sequence. It is ideally suited for repetitive dispensing and/or with viscous and high vapor pressure liquids. • Comprehensive range of liquid handling protocols with easy programming. • Contamination free dispensing with positive displacement principle. • Volume range from 1µl to 50ml. • Speed adjustment • Unbeatable accuracy and precision thanks to the patented DC-motor and optical feedback concept eLINE Dispenser operating modes: •Multiple Dispensing (d) • Pipetting (P) • Diluting (dd) • Sequential Dispensing (Sd) • Automatic Multiple Dispensing (Ad) • Multi-Aspirating (SA) Cat. # $/Each

Biohit eLine Dispenser PP00-41 757.00 with AC AdapterBiohit eLine Dispenser PP00-40 686.00 without AC Adapter

eLINE LITE DispensereLINE hands you a familiar but unique approach to a new, more comfortable world of multiple dispensing. The electronic eLINE LITE dispenser is a part of the Biohit’s eLINE family. The range of automated liquid handling operations offer the most ergonomic and accurate capabilities for any dispensing sequence. It is ideally suited for repetitive dispensing and/or with viscous and high vapor pressure liquids. • Comprehensive range of liquid handling protocols with easy programming. • Designed for Multiple Dispensing for quick and simple operation • Contamination free dispensing with positive displacement principle • Volume range from 1 µl to 50 ml • 5 Speeds for aspirating and Dispensing • Unbeatable accuracy and precision thanks to the patented DC-motor and optical feedback concept Cat. # $/Each

Biohit eLine LITE Dispenser PP09-01 544.00 with AC AdapterBiohit eLine LITE Dispenser PP09-00 492.00 without AC Adapter

Biohit Dispenser Tip PackagesThe Dispenser tip functions according to positive displacement principle, which allows for contamination free dispensing and accurate results. Tips and charging stands listed are compatible with both eLINE Dispenser and eLINE LITE Dispenser.

Vol. Type Qty/Unit Cat. # $/ Each

0.1Non sterile

100PP00-42 89.00

Pre-sterilized PP00-51 135.00

0.2Non sterile

100PP00-43 89.00


0.5Non sterile

100PP00-44 89.00


1.0Non sterile

100PP00-45 89.00


2.5Non sterile

100PP00-46 89.00


5.0Non sterile

100PP00-47 89.00


10.0Non sterile

100PP00-48 89.00


25.0Non sterile (1 adapter included)

25 PP00-49 32.00

50.0Non sterile (1 adapter included)

25 PP00-50 33.00

Adapter for 25 and 50 ml tips, 3 pcs./unit PP00-60 26.00

BiohitChargingStands Cat. # $/ Each

Biohit Linear Stand for All Pipettors PP03-15 92.00Single-Place charging stand PP02-30 131.00 for eLINE series Pipettors Four-place charging carousel PP02-31 321.00 for eLINE series Pipettors


Analytical Balances: bySartorius

Sartorius CP Series Analytical BalancesThe practical answer for all applications—available in various weighing capacitiesThe Sartorius CP Series of Analytical Balances, which come in a variety of weighing capacities from semi-micro to 320 g, relies on monolithic weigh cell technology to ensure accuracy in continual use year after year.

Startingat$2,205.00

Sartorius Extend Analytical Balances (ED Series)Ease of use eliminates operator error and ensures accuracy of resultsThe ED Series of Extend Analytical Balances, which come in weighing capacities of 120 g and 220 g and are operated through a language-driven user interface, ensure high thermal stability and extremely fast response times. Weighing Capacity Cat. # $/Each 120 g 5701-15 1,729.00 220 g 5701-16 2,000.00

Sartorius Toploading Precision Balances (CPA Series)Exceptionally high level of quality due to rugged housing constructionThe CPA Series offers high quality thanks to its rugged housing construction of high-grade materials. Standard applications include weighing in %, net-total formulation, dynamic weighing or animal weighing, mass unit conversion by toggling, and counting.

Startingat$1,129.00

Sartorius Talent Portable Balances (TE Series)Portable, dependable, accurate—A star performer that can go anywhereRugged and compact, Talent Portable TE Balances have just the right features for everyday use in the laboratory, including easy-to-read, high contrast displays, fast response times and complete ease of operation.

Startingat$536.00

Sartorius Micro Balance ME Series (ME5)Five-decimal-point readouts in just eight secondsScorching speed is what puts the Sartorius ME5 at the top of the class. Operation of the ME draft shield is also designed for fast weighing. Controlled by palm-operable keys or by custom programming. Weighing Capacity Cat. # $/Each 5.1 g 5701-01 15,363.00

Sartorius Talent Analytical Balances (TE Series)Just the perfect features for everyday use in your laboratoryThe TE Series of Analytical Balances from Sartorius comes in two weighing capacities, 60 g and 210 g, and both the weighing pan and weighing chamber are constructed of high-grade stainless steel. Weighing Capacity Cat. # $/Each 60 g 5701-18 1,498.00 210 g 5701-17 1,958.00

Moisture Analyzers: bySatoriusA. MA35 SeriesThese infrared dryers provide a fast alternative to oven drying. Ideal for many production and quality inspection routines. The MA35 allows easy, user-friendly sample heating (40 to 160°C) and analysis. Weighing capacity: 35 g (1 mg resolution). Cat. # $/Each

Glass Panels 5701-55 2,168.00 Metal Panels 5701-56 2,168.00

B. MA100 SeriesThis is the only IR dryer that features a built-in weighing system with 0.1-mg resolution and an EC type-approval certificate. Its Swift Parameter Adjustment adapts operation to the results of an available reference method and saves it as a drying routine. Cat. # $/Each

Halogen Heating Element 5701-59 5,285.00 Ceramic IR Heating Element 5701-60 5,285.00

Includes automatic and timer modes. Moisture measurement range: 0.05% to 100%. Weighing capacity: 100 g (0.1 mg resolution).

BA

BiohitChargingStands Cat. # $/ Each

Biohit Linear Stand for All Pipettors PP03-15 92.00Single-Place charging stand PP02-30 131.00 for eLINE series Pipettors Four-place charging carousel PP02-31 321.00 for eLINE series Pipettors


Cleaning

Shakers

Ionizing Blow-Off Gun Safely removes surface contaminants with a burst of clean, static-neutralized air or nitrogen. Low-voltage design for safe, low-EMI/RFI operation. Includes 0.4-micron capsule filter. Cat. # $/Each

120 or 240VAC2005-55 629.00

Laboratory Pumps fromILMVAC

Ultrasonic CleanersThese Branson C S A - l i s t e d cleaners provide thorough, safe cleaning of small- and medium-sized

parts. Models below feature heat controls with digital timer and degas function, which allows immediate use at maximum efficiency. All operate on 115VAC; 230VAC and other heating and timer configurations are also available.Tank Capacity Cat. # $/Each

0.5 gallons 2631-00 327.000.75 gallons 2617-00 431.001.5 gallons 2618-00 667.002.5 gallons 2619-00 853.005.5 gallons 2637-00 1,615.00

SNO GUN™ II High-Precision CleanerThe safe, inexpensive, highly effective alternative to solvent or dry nitrogen cleaning of sensitive parts! Dry ice particles remove contaminants as small as 0.1 micron without disturbing delicate surface features. Specialized inert gas enclosure available to prevent moisture condensation. Cat. # $/Each

4545-00A 1,975.00

MaxQ 2000These Thermo Scientific shakers operate in continuous or timed mode for applications including cell cultures, bacterial suspensions, solubility studies, staining, hybridization and more. Cat. # $/Each

Analog 5322-00 1,373.00

Dual-Action Orbital and Reciprocating ShakersThis affordable analog, dual-action orbital and reciprocating shaker is ideal for a wide range of laboratory applications—in incubators, warm rooms, environmental chambers and refrigerators. Cat. # $/Each

5322-68 1,840.00

Low Cost Orbital ShakersThese analog-only shakers feature built-in timers and can accommodate either thirteen 125 ml Erlenmeyer flasks or nine 250 ml flasks, depending on the model. Gentle to vigorous agitation at 40 to 220 rpm is adjustable. Cat. # $/Each

(13 flask model) 5322-62 887.00

Diaphragm PumpsThese pumps are the perfect solution for dry, oil-free applications in the rough and medium-high vacuum range. ILMVAC vacuum pumps can be used in a wide range of applications including vacuum distillation, vacuum concentration, molecular distillation, drying ovens, vacuum filtration and gel drying. Chemically resistant

models are also available for use when aggressive solvents and acid vapors are present.

Rotary Vane PumpsILMVAC’s P-Z series rotary vane pumps have a high water vapor tolerance with a compact design. Its small dimensions and high vacuum performance makes these chemically suitable pumps ideal for the laboratory. Applications include freeze drying and process engineering.

UltimatePressure

PumpSpeed

WaterVaporTolerance Cat. # $/Each

2x10-4 mbar 5.8/6.6 m3/h 60 mbar 7906-00 2,384.001.5x10-4 mbar 11.0/13.2 m3/h 35 mbar 7906-01 2,920.001.5x10-4 mbar 21.0/25.2 m3/h 35 mbar 7906-02 3,910.00StandardModels

UltimatePressure PumpSpeed Cat. # $/Each

<8 mbar 1.0/1.1 m3/h 7906-11 1,214.00<8 mbar 2.3/2.5 m3/h 7906-12 1,409.00<2 mbar 2.0/2.2 m3/h 7906-13 1,999.00<2 mbar 4.5/4.9 m3/h 7906-14 2,608.00


Refrigerated & Heating Baths/Circulators• “ED”modelprovidesPIDtemperaturecontrolina

economicalsystemthat’sidealforgenerallaboratoryapplications

• “ME”modelsincludecascadingtemperaturecontrol,earlywarninglow-liquidlevelsensor,andcapabilitytorecirculatetoanexternalvessel(requiresexternaltem-peratureprobe)

• “HL”circulatorincludesIntelligentCascadeControlandexternalsensorconnection

JULABO Refrigerated and Heating Circulators are suitable for temperature control of external vessels with simultaneous operation in the integral bath tank. The units provide high heating/cooling capacities to ensure rapid heat-up and cool-down times. With “Active Cooling Control” up to +200ºC, an FP model offers proportional cooling control to ensure energy-saving performance and reduces heat generation to the environment.

Removable venting grid provides convenient cleaning of dust particles. Typical applications include routine laboratory applications and external temperature control applications to measuring cells, refractometers, polarimeters, photometers, viscometers, fermenters, electrophoresis chambers, chromatography columns, rotary evaporators, and rheometers.

Other Controlled-Temperature Solutions from Julabo — Visit TerraUniversal.com

Cryo-Compact Circulators

Model* TemperatureRange(°C)

Stability Heater,Watts Cooling@(+20°C)

Flow/Pressure

FillingVolume Bathopening/bathdepth(inches) Cat. # $/Each

F12-ED -20...100 ±0.03 2000 200 Watts 15 lpm/5.1psi 4.5 L 5.1 x 5.9 / 5.1 2540-00 2,975.00F25-ME** -28...200 ±0.01 2000 350 Watts 15 lpm/5.1psi 4.5 L 9.1 x 16.5 x 24 2540-01 4,288.00F32-ME** -35...200 ±0.01 1000 450 Watts 15 lpm/5.1psi 8 L 12.2 x 16.5 x 25.2 2540-02 5,075.00FP50-HL** -50...200 ±0.01 2000 900 Watts 15 lpm/5.1psi 8 L 16.5 x 19.3 x 28.4 2540-03 8,619.00

* Units include 2 each barbed fittings for tubing 8 and 10 mm inner diameter. ** Models have RS232 interface.

Circulators for MOCVD Applications

Air- and Water-Cooled Recirculating Coolers

SemiChill Recirculating Coolers

F12-ED F25-ME FP50-HLF32-ME

Controlled-Temperature Solutions: byJulabo


Reusable Garments: byVidaro

Vidaro Grid — high performance cleanroom fabric designed for in-dustries where it is essential to protect products from static dissipative charges as well as airborne particles.

Maxima ESD — fluid resistant fabric with built-in static control properties. Widely used in food technology, medical and pharmaceutical industries to help control product and work contamination

A.Coveralls B.BootsGrid Maxima ESD Grid Maxima ESD

Size* Cat. # $/Each Cat. # $/Each Cat. # $/Pair Cat. # $/Pair

XS 4953-00 38.00 4953-36 39.00 4953-24 36.00 4953-43 25.00S 4953-01 38.00 4953-37 39.00 4953-25 36.00 4953-44 25.00M 4953-02 38.00 4953-38 39.00 4953-26 36.00 4953-45 25.00L 4953-03 38.00 4953-39 39.00 4953-27 36.00 4953-46 25.00

* Larger sizes available at TerraUniversal.com.

A. – B. Cleanroom Coveralls and Boots

G. Modesty Garments (Undergarments)

This shirt-and-pants set can be worn inside other cleanroom garb as undergarments or as outer garments themselves. Sold as a set.

E. – F. Frocks and Shoe CoversAvailable in white and light blue, Vidaro Taffeta frocks and shoe covers are comfortable, long wearing and modestly priced.

E. FrockSize*

White Light BlueCat. # $/Each Cat. # $/Each

XS 4953-65 29.00 4953-71 29.00S 4953-66 29.00 4953-72 29.00M 4953-67 29.00 4953-73 29.00L 4953-68 29.00 4953-74 29.00

* Larger sizes available at TerraUniversal.com.

F. Shoe Cover White Light BlueSize Cat. # $/Each Cat. # $/Each

S 4953-57 11.00 4953-61 11.00M 4953-58 11.00 4953-62 11.00L 4953-59 11.00 4953-63 11.00

XL 4953-60 11.00 4953-64 11.00

C. HoodsThe Vidaro Grid Pullover Cleanroom hood offers complete head coverage with a sewn-in replaceable over the nose 2-ply poly tricot. The Maxima ESD Pullover Cleanroom Hood offers complete head coverage with round face opening.

Material Size* Cat. # $/Each

Grid XS 4953-12 12.00Grid S 4953-13 12.00Grid M 4953-14 12.00Grid L 4953-15 12.00

Maxima ESD OSFA 4953-42 15.00* The Vidaro Grid hoods are available

up to 3XL.

Size* Cat. # $/Each

XS 4953-50 35.00S 4953-51 35.00M 4953-52 35.00L 4953-53 35.00

*Sizes available up to 5XL.

D. Lab CoatsVidaro Advanced Static Control Lab Coats are cool and comfortable, so they may be worn over normal clothing, yet they effectively reduce electrostatic charges to safe levels, eliminating the possibility of arcing from workers to sensitive electronic products.

White Light Blue GraySize* Cat. # $/Each Cat. # $/Each Cat. # $/Each

XSM 4954-00 30.00 4954-06 31.00 4954-12 31.00SM 4954-01 30.00 4954-07 31.00 4954-13 31.00

MED 4954-02 30.00 4954-08 31.00 4954-14 31.00L 4954-03 30.00 4954-09 31.00 4954-15 31.00

* Sizes available up to 2XL.

Visit www.TerraUniversal.com for complete fabric specifications and sizing charts

A B

D

F

E

C

G

A B

C

Vidaro Maxima

ESDVidaro Grid

Quantity Discounts!Additional discounts apply to orders of Vidaro Grid, Maxima ESD and Modesty Garments over 100 pieces.


Cleanroom Supplies: Specifications and Pricing at TerraUniversal.com

A. WipersTerra Universal offers an assortment of cleanroom and laboratory wipers to suit every need.

Cotton Wipers are woven for strength and durability, and are clean and absorbent. Ideal for cleaning magnetic disk media surfaces, high heat applications, and absorbing aqueous and organic solvent spills. Suitable for Class 1000 and higher cleanrooms.

Laundered Polyester Wipers are ideal for critical environments where ultra-low particle/fiber generation and absorbent capacity is important. Soft yet durable construction cleans surfaces without scratching. The 2-ply wiper is commonly used in pharmaceutical applications as a primary process wiper.

Cat# $/Bag

Clean Room Tote Bag, Custom sizes available 4954-70 50.00B. Cleanroom PaperSpecially formulated cleanroom paper minimizes particle generation in controlled environments. Ultra-low particle, extractable and metallic ion content. High tear and tensile strength, burst strength of 50 lbs. per inch. Compatible with virtually any ink or copier system. Processed and double bagged in a Class 100 cleanroom.

C. Disposable GlovesWe offer a wide variety of cleanroom gloves suitable for different applications and cleanliness requirements. The Nitrile cleanroom gloves are available in sterile packaging for use in Class 10 environments and in non-sterile packaging appropriate for Class 10, 100, 1,000, and 10,000. A PVC cleanroom glove is also available which has excellent ESD properties and is a good fit for use in microelectronics manufacturing.

D. Gloves LinersThese lightweight, non-linting liners are knitted with fine-gauge, 100% virgin nylon. They provide dexterity in finger tips, while offering comfort and improved grip in palm. Quality, sturdy construction allows liners to be laundered and reused. Universal size and ambidextrous shape fits comfortably under latex, PVC or nitrile gloves. Suitable for use in controlled environments.

E. Clean Room Tote BagCleanroom-compatible polyester shell with durable tan bottom composed of polyester substrate with a hypalon coating. Dimensions: 6"L x 6"W x 12"H.Shown with Cold Room Coverall — cleanroom-compatible polyester inner lining and insulation ensure wearer comfort in 2ºC cold rooms. Call for ordering information.

F. Vidaro Grid Tool BeltIncludes a convenient pocket for tools, cell phone, or other small items. Vidaro grid material is cleanroom compatible and includes carbon fiber grid that dissipates static charges.

G. Clean Equipment CoversCleanroom-compatible polyester construction, tailored to your equipment needs!

Model shown: No. 2805-64, for Terra cleanroom step stool No. 2805-50A-2 (see page 28). Private labeling available.

Cat. # $/Bag

Large (48") 4954-60 46.00X-Large (54") 4954-61 46.002X-Large (60") 4954-62 47.00

A

E

Cold Room Garments—Keep products clean and people warm!

Tote Bag —Clean,durable

B C D

F G


These handy dispensers save space and organize gloves, safety glasses, wipers, hats, and other garb. They’re perfect benchtop storage bins for small parts used in cleanroom processing. Select clear acrylic or static-dissipative PVC, which eliminates static charges and the particles they attract.

Garb and Parts Dispensers Space-Saving Convenience!

Item (see photos) Dimensions Acrylic Static-Dissipative PVCW x D x H, in Cat. # $/Each Cat. # $/Each

A. Mini-Hood 20 x 16 x 12 4950-89 322.00 4950-90 599.00B. Mini-Desiccators 8 x 10 x 7.25 4950-06 380.00 4950-08 570.00

10 x 16 x 9.5 4950-09 506.00 4950-11 773.00C. Wall-Mount Glove Dispenser (single) 15.75 x 12.5 x 17 4950-72 222.00 4950-74 299.00D. Wall-Mount Glove Dispenser (triple) 16 x 11.5 x 12 4005-56 247.00 4005-57 372.00E. Benchtop Glove Dispenser* 12 x 6 x 6 4951-03 77.00 4951-04 116.00F. File Holder (4 slots) 10.5 x 5 x 15 4005-25 89.00 4005-23 159.00G. Dispensing Bins 5 x 6.25 x 8.25 4950-12 129.00 4950-13 224.00H. Apparel Dispenser 48.5 x 24.5 x 36 4951-06 3,304.00 4951-07 5,948.00I. Multi-Chamber Dispenser 15.75 x 8 x 15 4005-51 328.00 4005-50 488.00J. Wiper Dispenser (enclosed) 12 x 9 x 6 4951-01 84.00 4951-02 149.00K. Wiper Dispenser (open top) 10.5 x 14.5 x 4 4950-93 60.00 4950-94 110.00L. Safety Glasses Dispensers Holds: 8 6.75 x 17 4950-45 244.00 4950-46 321.00

(all are 5.75"D) 12 9.75 x 17 4951-15 318.00 4951-16 417.0016 6.64 x 26.42 4951-17 439.00 4951-18 578.00

Other sizes available–call Terra!

16 13.25 x 17 4951-19 439.00 4951-20 578.0024 9.75 x 28.25 4951-21 570.00 4951-22 750.00

*Now available in stainless steel—see facing page.

24 19.5 x 17 4951-23 570.00 4951-24 750.0032 13.25 x 29.25 4951-25 789.00 4951-26 1,040.0048 19.5 x 28.25 4951-27 1,027.00 4951-28 1,348.00

For gloves, hoods, face masks*

Install next to hand washerAccommodates multiple glove sizes or materials

Organizes small parts

Ideal for finger cots

Easy-access wiper dispensing*

Hinged top keeps wipers clean

B E

G H

J K

F

I

L

C D

Mini-hood provides the ideal equipment enclosure

Clean, dry benchtop storage

A


For Gilson Pipetman and Drummond Pipette-Aid models

O P

Protects fragile pipette tips

Item (see photos) — includesanit-microbial coating

Dimensions Electropolished 304 SSW x D x H, in. Cat. # $/Each

A. Glove Dispenser, 27 x 7 x 24 (3 compartment) 4951-30-2AM 985.00Wall-mount 34.5 x 8 x 24 (4 compartment) 4951-31-2AM 1,205.00

B. Glove Dispenser, 24 x 8 x 24 (3 compartment) 4951-32-2AM 930.00Wall-mount 32 x 8 x 24 (4 compartment) 4951-33-2AM 1,205.00

C. Glove Dispenser 12 x 6 x 6 4951-50-2AM 119.00D. Wiper Dispenser 12 x 9 x 6 4951-40-2AM 128.00

9.5 x 9.5 x 6 4951-41-2AM 128.00E. Bootie Dispenser 15 x 6 x 6 4951-45-2AM 143.00F. Swab Dispenser 6 x 4 x 6 4951-35-2AM 59.00G. Glove Dispenser 5.5 x 3.75 x 20 (2 boxes) 4951-51-2AM 58.00H. Glove Dispenser 5.5 x 3.75 x 30 (3 boxes) 4951-52-2AM 79.00I. Glove Dispenser 5.5 x 3.75 x 10 (1 boxes) 4951-53-2AM 51.00J. Glove Dispenser 12 x 3.75 x 10 (2 boxes) 4951-54-2AM 57.00K. Glove Dispenser 18 x 3.75 x 10 (3 boxes) 4951-55-2AM 72.00L. Petri Dish Incubation

Tray5.37 x 13.75 x .89 4951-85-2AM 48.00

M. Pipette Support Rack 8.88 x 9.2 x 11.75 4951-67-2AM 64.00N. Electrophoresis Gel

Plate Drying Rack6.25 x 7.75 x 7.12 4951-64-2AM 70.00

O. Microliter Pipettor Racks 9 x 5 x 6.75 4951-81-2AM 70.00P. Microliter Pipettor Racks 9 x 7.82 x 6.75 4951-83-2AM 59.00Q SS Clipboard 12 x 9.5 1350-00A-2AM 61.00

Models for loose or packaged gloves

Holds up to four petri dishes

Clean, dry benchtop storage

Stainless Steel Lab AidsAll models now with Anti-Microbial Coatings*

G. – K.Glove Dispensers– many sizes available.

4951-51A-2

L

M

N

A

B

Bench or wall-mount

glove dispenser

Wiper dispenser

Bootie dispenser

C

D

E

FSwab dispenser

* Durable coatings fight bacteria and other microbes — details at TerraUniversal.com

Includes anti-microbial coating for germ control!

Q

Stainless Steel Cleanroom and Lab AidsConvenient racks, dispensers and tools all feature a durable antimicrobial coating to reduce infection rates and product contamination! Dozens of other models at TerraUniversal.com

Holds plates over 6" wide


Biowave DNA UV/VISSpectrophotometer by Biochrom

—page 44

LAMBDA Bio+ Spectrophotometerfrom Perkin Elmer

—page 45

Electronic Pipettorsby Biohit

—page 46

Thermo Scientific Max Q2000 Shaker

—page 48

SterileMax Steam Sterilizerfrom Thermo Scientific

—TerraUniversal.com

Analytical Balances by Sartorius

—page 47

Microplate Incubating Shakers from Jencons

—page 45

Two-Drawer Undercounter Refrigerators from Marvel Scientific

—page 41

PRSRT STDU.S. POSTAGE PAID

TERRAUNIVERSAL800 S. Raymond Ave., Fullerton, CA 92831 USA

Tel: 714-578-6000 • Fax: 714-578-6020TerraUniversal.com • [email protected]

CHANGE SERVICE REQUESTED

Update Mailing Information at www.TerraUniversal.com

Select ”Contact Us” and enter your name and contact ID (printed above) on the “Update Mailing Information” e-mail form.

cleanroomlabequipment_1_2011

Documents