clevises catalog - midwest control · pdf filefamily photo series page material features...

Clevises Catalog Midwest Control Products Corp

ISO9001 Registered100 Linkage Styles • 2,000 Catalog Items • 10,000 Designs • 1,000,000 Pieces in Inventory

Clevises Catalog - Revision A -

Midwest Control Products Corp, Box 299, 590 E Main St, Bushnell, IL 61422 USA☎ 309-772-3163 ✉ [email protected] Fx: 309-772-2266 www.midwestcontrol.com

mailto:[email protected]


http://www.midwestcontrol.com


Family Photo Series Page Material Features System

Clips BC 4 Steel Fits Grooved Pins Metric

Clips SC 5 Steel Fits Grooved Pins Metric

Clips SP 6 Steel & Stainless

Fits Forged Yokes Inch

SPBSPM

6 7

Fits Turned ClevisesFits Turned Clevises

InchMetric

Pins CPG 8 Steel Grooved Metric

Pins CPT 8 Steel Threaded Clevis Pins Inch

Pins CPCPSS

9 SteelStainless

Cross Hole Inch

Pins CPMCPMSS

9 SteelStainless

Cross Hole Metric

Clevises Linkages 10 - Common Clevis & Yoke Linkages Inch & Metric

Clevises ATC 11 Steel Articulated Clevis Inch & Metric

Clevises CTC 12 Steel Cylinder Style, Large Diameter Metric

Clevises MMC 13 Steel Turned Clevis Metric

Clevises BTCMTC

14 15

Steel Turned Clevis InchMetric

Clevises MTCAMTCSS

18 19

AluminumStainless

Turned Clevis Metric

Clevises TCTCM

20 Steel Patented Spinning Barrel

InchMetric

Yoke Ends MFC-B 21 Steel Bent Yoke Inch

Yoke Ends MFC-N 21 Steel Insert Yoke Inch

Yoke Ends MFC-F 21 Steel Offset Yoke Inch

Yoke Ends MFCMFC-SS

22 26

SteelStainless

Forged Female Yoke End Inch & Metric

Yoke Ends Yoke 27 Steel Forged Male Yoke End Inch







Family Photo Series Page Material Features System

Yoke Ends MHC 28 Steel Half Clevis (Integral Pin) Inch

Eye Ends CTE 29 Steel For crimping/threading onto cables Inch

Eye Ends DCA 30 Steel Dual Carb Adjusters Inch

Eye Ends DME 31 Steel Turned Female Eye End Metric

Eye Ends DVF PV

32 Steel Valve Rod Ends Direct Valve Mount Rod End PV

Inch

Eye Ends GMNGMNSS

33 SteelStainless

Turned Female Eye End Metric

Eye Ends GMP 34 Nylon Gas Spring Rod End Metric

Eye Ends GMW 34 Steel Eye Rod End Metric

Eye Ends MAE 35 Steel Forged Female Eye Ends Inch

Eye Ends CRE TEE

36 Steel Chrome Plated Eye End (Turned) Zinc Plated Eye End (Forged)

Inch

Styling Clevises

PMCSS-PMC

37 SteelStainless

Performance Series Inch

Styling Clevises

PWF 38 Steel Weld-In Tube End Clevises Inch

Isolated Rod Ends

MFIR 39 Steel Isolated Rod Ends Inch

Swivels Swivels 40 Steel Economical Design Inch

Wire Stops BWS 42 Steel Setting Screw Inch

Wire Stops WS 42 Steel Economical Design Inch

Warranty: Seller makes no warranties either express or implied, including without limitation warranties of mer-chantability, fitness or suitability for a particular purpose or application. Suitability for an application is the sole re-sponsibility of the buyer. All published strengths, configurations, dimensions, materials, load ratings, etc., are con-sidered reference, are NOT guaranteed, and all are subject to change without prior notice. Use at your own risk!







BC Bayonet Clips

BC Clips

b1

h1h2

a

s

d1d2

mn

zb2

Part Number

Nominal Size

b1 b2 h1 h2 a s to fit these bolt dimensions

d1 d2 m n z

BC-4 4 7.0 4.2 9.0 3.5 2.0 0.35 4 3.2 0.64 2.0 0.50

BC-5 5 9.0 5.2 11.0 4.5 2.3 0.33 5 4.0 0.74 2.5 0.50

BC-6 6 11.0 6.1 13.6 5.5 2.8 0.40 6 5.0 0.74 3.0 0.75

BC-8 8 14.0 8.2 18.0 7.0 3.6 0.50 8 6.0 0.94 3.5 1.00

BC-10 10 18.0 10.2 22.0 9.0 4.0 0.50 10 8.0 1.05 4.5 1.00

BC-12 12 22.0 12.2 26.0 10.0 5.0 0.60 12 9.0 1.15 5.0 1.25

BC-14 14 25.0 14.2 30.0 12.0 6.0 0.70 14 10.0 1.25 5.5 1.50

BC-16 16 28.0 16.4 37.0 16.0 6.5 0.80 16 12.0 1.35 6.0 1.50

Clevis Spring Pins replace the need

for clevis pins, clips, cotters ->

MCP Offers a Full DIN Metric Line Buy On-Line at www.midwestcontrol.comNo Minimums. 3,000+ items.

<- Turnbuckle Clevises eliminate the need for Left Hand threads

Clevises







SC Safety Clips

SC Clips

b

h h1

a

s

d1d2

mn

z

Part Number Nominal Size

b h h1 a s to fit these bolt dimensions

d1 d2 m n z

SC-4 4 7.0 8.5 4.0 2.3 0.3 4 3.2 0.64 2.0 0.50

SC-5 5 9.0 10.7 5.0 3.3 0.4 5 4.0 0.74 2.5 0.50

SC-6 6 11.0 14.1 6.0 3.8 0.4 6 5.0 0.74 3.0 0.75

SC-8 8 14.0 17.5 8.0 4.0 0.5 8 6.0 0.94 3.5 1.00

SC-10 10 18.0 22.1 10.0 5.0 0.5 10 8.0 1.05 4.5 1.00

SC-12 12 22.0 26.0 12.0 5.0 0.5 12 9.0 1.15 5.0 1.25

SC-14 14 25.0 30.0 13.5 6.0 0.6 14 10.0 1.25 5.5 1.50

SC-16 16 28.0 34.0 16.0 6.0 0.6 16 12.0 1.35 6.0 1.50







SP & SPB Inch Clevis Spring Pins (Steel & Stainless)Steel ConstructionPlated Zinc Yellow

AH

G

F

K

C

Part Number Fits Clevis A C F G H K

SPB188S BTC-188S 0.75 0.22 0.43 0.186 0.90 0.06

SPB188L BTC-188L 1.14 0.22 0.43 0.186 1.30 0.06

SP2800 280077 1.38 0.26 0.48 0.186 1.58 0.08

SPB250S BTC-250S 0.90 0.25 0.56 0.249 1.10 0.08

SPB250L BTC-250L 1.38 0.25 0.56 0.249 1.57 0.08

SP2801 280177 1.81 0.32 0.67 0.249 2.05 0.10

SPB312S BTC-312S 1.18 0.31 0.70 0.312 1.43 0.09

SPB312L BTC-312L 1.81 0.31 0.70 0.312 2.05 0.09

SP2802 280277 2.28 0.39 0.81 0.312 2.56 0.12

SPB375S BTC-375S 1.50 0.39 0.83 0.374 1.77 0.12

SPB375L BTC-375L 2.28 0.39 0.83 0.374 2.56 0.12

SP2803 280377 2.28 0.39 0.94 0.374 2.56 0.12

SPB500S BTC-500S 2.04 0.47 1.08 0.495 2.37 0.12

SP2806 280677 2.73 0.47 1.20 0.495 3.05 0.12







SPM Metric Clevis Spring Pins (Steel & Stainless)

AH

G

F

K

C

Part Number Dimensions

Plated Zinc Yellow

Plated Zinc Silver

Stainless Steel

Size A C F G H K

SP4MS SP4MS-ZC - 4 x 8 15 4.5 9.5 3.93 / 4.00 19.0 1.5

SP5MS SP5MS-ZC SP5MS-SS 5 x 10 19 5.5 12 4.93 / 5.00 23.0 1.5

SP5ML SP5ML-ZC SP5ML-SS 5 x 20 29 5.5 12 4.93 / 5.00 33.0 1.5











SP20MS SP20MS-ZC - 20 x 40 71.5 16.0 45 19.87 / 20.00 87.5 5.0







CPG Metric Grooved Clevis Pins

Steel ConstructionPlated Zinc Clear

Using the CPG - Clip Sold Separately

B

CHG

AE

F

Part Number A B C E F G H

CPGM4 4.0 6.0 1.0 0.64 3.2 10.5 8.5

CPGM5 5.0 8.0 1.5 0.74 4.0 13.0 10.5

CPGM6 6.0 9.0 1.5 0.74 5.0 15.5 12.5

CPGM8 8.0 12.0 2.0 0.94 6.0 20.0 16.5

CPGM10 10.0 14.0 2.0 1.05 8.0 25.0 20.5

CPGM12 12.0 17.0 3.0 1.15 9.0 30.0 24.5

CPGM16 16.0 20.0 3.5 1.35 12.0 38.5 32.5

CPT Threaded Clevis Pins1018 Steel, Chrome Plated

A

H

G

C

Thread Thread D (Typ)

ØB (Typ)

Part# Thread A B C D G H

CPT187 6-32 0.186 0.320 0.070 1/8 allen 0.375 0.188

CPT250 8-32 0.248 0.380 0.100 3/16 allen 0.500 0.250

CPT312 10-32 0.311 0.440 0.100 7/32 allen 0.630 0.315

CPT375 1/4-28 0.373 0.510 0.130 1/4 allen 0.750 0.375

CPT500 3/8-24 0.496 0.630 0.160 5/16 allen 1.000 0.500

CPT625 7/16-20 0.621 0.820 0.210 3/8 allen 1.250 0.625







CP and CPM Clevis Pins

B

CHG

AE

Part Number A B C E G H

Steel Plated Zinc Yellow

Stainless Steel

CP2800 CP2800-SS 0.186 0.320 0.070 0.088 0.580 0.504

CP2801 CP2801-SS 0.248 0.380 0.100 0.088 0.770 0.692

CP2802 CP2802-SS 0.311 0.440 0.100 0.119 0.940 0.832

CP2803 CP2803-SS 0.373 0.510 0.130 0.119 1.060 0.958

CP2806 CP2806-SS 0.496 0.630 0.160 0.151 1.395 1.223

CP2807 CP2807-SS 0.621 0.820 0.210 0.151 1.610 1.473

METRIC DIMENSIONS

CPM4 CPM4-SS 4.0 6.0 1.0 1.0 12.0 10.0

CPM5 CPM5-SS 5.0 8.0 1.5 1.2 15.0 12.3

CPM6 CPM6-SS 6.0 9.0 1.5 1.6 18.0 15.3

CPM8 CPM8-SS 8.0 12.0 2.0 2.0 23.0 19.5

CPM10 CPM10-SS 10.0 14.0 2.0 3.2 29.0 24.5

CPM12 CPM12-SS 12.0 17.0 3.0 4.0 35.0 29.5

CPM16 CPM16-SS 16.0 20.0 3.5 4.0 45.0 38.2

CPM20 CPM20-SS 20.0 28.0 4.0 5.0 53.0 47.0

CPM30 CPM30-SS 30.0 36.0 5.5 6.3 67.0 59.0

CPM35 CPM35-SS 35.0 45.0 7.0 8.0 87.0 76.5







Clevis Linkages - Refer to our Rigid Linkages Catalog

Male Yoke, Female Yoke, Spring Pin, Clevis Pin Eye Rod End, Female Yoke, Spring Pin

Metric Clevises, Spring Pins, standard TRM Rod Yoke Ends, Spring Pins, custom Swaged Tube

Yoke Ends, Spring Pins, standard TR Rod PMC Clevises, standard HBT Tube, Clevis Pins

Since our founding in 1967, MCP has manufactured millions of clevis and yoke linkages.







ATC (Articulated Clevises)

Patent Pending

Plated Zinc Clear Steel Construction

E

F

I

ØG

AH

D

M

B

S30°

P

Part# Thread A B E F G H J M P S

ATC187 10-32 1.563 0.313 0.188 0.438 0.188 1.77 0.375 0.75 0.43 0.312

ATC250 1/4-28 2.000 0.438 0.281 0.625 0.250 2.21 0.500 0.98 0.50 0.375

ATC312 5/16-24 2.250 0.500 0.344 0.750 0.313 2.56 0.625 1.00 0.56 0.437

ATC375 3/8-24 2.500 0.625 0.438 0.875 0.375 2.83 0.750 1.18 0.75 0.562

ATC500 1/2-20 3.375 0.813 0.563 1.125 0.500 3.84 1.000 1.57 1.00 0.750

METRIC DIMENSIONS

ATCM4 M4 x 0.70 24 8 4 8 4 29 8 12.0 6.0 6

ATCM5 M5 x 0.80 30 9 5 10 5 36 10 14.5 8.0 7

ATCM6 M6 x 1.00 10 12 6 12 6 43 12 16.6 9.0 9

ATCM8 M8 x 1.25 48 14 8 16 8 58 16 24.3 14.0 11

ATCM10 M10 x 1.50 60 18 10 20 10 72 20 28.0 15.5 13

ATCM10-F M10 x 1.25 60 18 10 20 10 72 20 28.0 15.5 13

ATCM12 M12 x 1.75 72 20 12 24 12 86 24 33.5 18.0 13

ATCM12-F M12 x 1.50 72 20 12 24 12 86 24 33.5 18.0 13

Buy On-Line at www.midwestcontrol.comNo Minimums. 3,000+ items.

We also offer cable assemblies & pieces

Clevises







CTC - Cylinder Style Clevises

Material: 12L14 SteelPlated Zinc Clear

B

C

E F

A

Ø G

H

Threads

D

Part Number

Thread A ±0.76

B -0.0/+3.0

C ±1.0

D -0.0/ +1.0

E -0.0/ +0.5

F -0.5/ +0.0

G -0.0

H ±1.0

CTC-10 M10 x 1.25 RH 32 14 20.7 13 12 26 10.0+0.04 42.0

CTC-12 M12 x 1.25 RH 36 16 30.7 19 16 34 12.0+0.04 51.0

CTC-14 M14 x 1.50 RH 38 18 30.0 19 20 42 14.0+0.05 53.0

CTC-16 M16 x 1.50 RH 54 22 54.4 32 30 62 20.0+0.05 81.0

CTC-20 M20 x 1.50 RH 60 28 53.4 32 30 62 20.0+0.05 86.5

CTC-27 M27 x 2.00 RH 75 36 59.8 39 40 83 28.0+0.06 105.0

CTC-33 M33 x 2.00 RH 99 45 89.0 54 50 103 36.0+0.07 143.5

CTC-42 M42 x 2.00 RH 113 56 91.5 57 60 123 45.0+0.08 159.0

CTC-48 M48 x 2.00 RH 126 63 99.3 63 70 143 56.0+0.09 175.5

CTC-64 M64 x 3.00 RH 168 85 134.9 83 80 163 70.0+0.10 235.5

<- Use our DME series valve rod end for female valve spools.

<- Female Rod Ends are shown in our Spherical Rod Ends catalog


COM Bearings are shown in our Spherical Rod Ends catalog ->

Consider our MTC c l e v i s e s f o r smaller applica-tions ->

Clevises







MMC (MALE METRIC CLEVIS)

Low Carbon Steel, Plated Zinc SilverDIN 71752

EF

D B

A

H

Ø G

I

Thread

Part Number Thread A±0.5

B±0.3

D±0.6

E+0.8 / -0.2

F+0.6 / -0.3

G- 0.0 / + ...

H±0.3

I±0.84

MMC-6 M6 x 1.00 RH 37 15 12 6 12 6 +0.5 44 12

MMC-8 M8 x 1.25 RH 47 20 16 8 16 8 +0.5 57 16

MMC-10 M10 x 1.50 RH 57 25 20 10 20 10 +0.5 69 20

MMC-12 M12 x 1.75 RH 68 30 24 12 24 12 +0.5 82 24

MMC-14 M14 x 2.00 RH 69 35 28 14 27 14 +0.5 94 27

MMC-16 M16 x 2.00 RH 89 40 32 16 32 16 +0.5 108 32

MMC-20 M20 x 2.50 RH 109 45 40 20 40 20 +0.6 134 40

<- we offer TMY male yokes and assemblies.

MCP offers a full metric family <- we offer a full line of attaching hardware.


Clevises







BTC (INCH TURNED CLEVISES)

Steel Construction, Plated Zinc Yellow

Add “-LH” suffixfor LH threads

D

A

H

E

F I

ØB Thread

ØG

Part# Thread A B D E F G H I

BTC-187S 10-32 0.769 0.354 0.394 0.1875 0.375 0.1875 1.024 0.375

BTC-187L 10-32 1.162 0.354 0.787 0.1875 0.375 0.1875 1.417 0.375

BTC-250S 1/4-28 0.972 0.394 0.472 0.2500 0.500 0.2500 1.220 0.500

BTC-250L 1/4-28 1.445 0.394 0.945 0.2500 0.500 0.2500 1.693 0.500

BTC-312S 5/16-24 1.260 0.551 0.630 0.3125 0.630 0.3125 1.654 0.630

BTC-312L 5/16-24 1.890 0.551 1.260 0.3125 0.630 0.3125 2.283 0.630

BTC-375S 3/8-24 1.537 0.708 0.787 0.3750 0.750 0.3750 2.047 0.750

BTC-375L 3/8-24 2.325 0.708 1.575 0.3750 0.750 0.3750 2.834 0.750

BTC-500S 1/2-20 2.102 0.945 1.102 0.5000 1.000 0.5000 2.834 1.000

BTC-500L 1/2-20 3.205 0.945 2.205 0.5000 1.000 0.5000 3.976 1.000

BTC-625S 5/8-18 2.510 1.024 1.260 0.6250 1.250 0.6250 3.268 1.250

BTC-625L 5/8-18 3.770 1.024 2.520 0.6250 1.250 0.6250 4.528 1.250

BTC-750S 3/4-16 3.150 1.339 1.575 0.7500 1.575 0.7500 4.134 1.575


Clevis Spring Pins available ->

Clevises







MTC (METRIC TURNED CLEVIS)

Steel Construction, Zinc PlatedDIN 71752

D

A

H

E

F I

ØB Thread

ØG

Part Number Threads Plating A ±2

B ±2

D ±2

E +0.5/-0

F ±0.2/-0.8

G -0.0

H ±2

I ±0.84

MTC-4S M4 x 0.70 RH Yellow 16 8 8 4 8 4+0.5 21 8

MTC-4S-ZC M4 x 0.70 RH Silver 16 8 8 4 8 4+0.5 21 8

MTC-4L M4 x 0.70 RH Yellow 24 8 16 4 8 4+0.5 29 8

MTC-4L-ZC M4 x 0.70 RH Silver 24 8 16 4 8 4+0.5 29 8

MTC-5S M5 x 0.80 RH Yellow 20 9 10 5 10 5+0.5 26 10


MTC-5S-M6-ZC M6 x 1.00 RH Silver 20 9 10 5 10 5+0.5 26 10

MTC-5L M5 x 0.80 RH Yellow 30 9 20 5 10 5+0.5 36 10

MTC-6S M6 x 1.00 RH Yellow 24 10 12 6 12 6+0.5 31 12


MTC-6S-LH M6 x 1.00 LH Yellow 24 10 12 6 12 6+0.5 31 12

MTC-6S-M5 M5 x 0.80 RH Yellow 24 10 12 6 12 6+0.5 31 12

MTC-6S-LH-M5 M5 x 0.80 LH Yellow 24 10 12 6 12 6+0.5 31 12

MTC-6S-M8-ZC M8 x 1.25 RH Silver 24 10 12 6 12 6+0.5 31 12

MTC-6L M6 x 1.00 RH Yellow 36 10 24 6 12 6+0.5 43 12








B ±2

D ±2

E +0.5/-0

F ±0.2/-0.8

G -0.0

H ±2

I ±0.84

MTC-6L-LH M6 x 1.00 RH Yellow 36 10 24 6 12 6+0.5 43 12

MTC-6L-M5 M5 x 0.80 RH Yellow 36 10 24 6 12 6+0.5 43 12

MTC-6L-LH-M5 M5 x 0.80 LH Yellow 36 10 24 6 12 6+0.5 43 12

MTC-8S M8 x 1.25 RH Yellow 32 14 16 8 16 8+0.5 42 16


MTC-8S-LH M8 x 1.25 LH Yellow 32 14 16 8 16 8+0.5 42 16



MTC-8S-M10-F-ZC M10 x 1.25 RH ☚ Silver 32 14 16 8 16 8+0.6 42 16

MTC-8L M8 x 1.25 RH Yellow 48 14 32 8 16 8+0.6 58 16

MTC-8L-ZC M8 x 1.25 RH Silver 48 14 32 8 16 8+0.6 58 16

MTC-8L-LH M8 x 1.25 LH Yellow 48 14 32 8 16 8+0.6 58 16



MTC-10S-F-ZC M10 x 1.25 RH ☚ Silver 40 18 20 10 20 10+0.7 52 20

MTC-10S M10 x 1.50 RH Yellow 40 18 20 10 20 10+0.7 52 20



MTC-10L M10 x 1.50 RH Yellow 60 18 40 10 20 10+0.7 72 20

MTC-10L-LH M10 x 1.50 LH Yellow 60 18 40 10 20 10+0.7 72 20



MTC-12S-F1 M12 x 1.50 RH ☚ Yellow 48 20 24 12 24 12+0.7 62 24


MTC-12S M12 x 1.75 RH Yellow 48 20 24 12 24 12+0.7 62 24








B ±2

D ±2

E +0.5/-0

F ±0.2/-0.8

G -0.0

H ±2

I ±0.84


MTC-12L M12 x 1.75 RH Yellow 72 20 48 12 24 12+0.7 86 24



MTC-16S-F M16 x 1.50 RH ☚ Yellow 64 26 32 16 32 16+0.7 83 32


MTC-16S-LH-F M16 x 1.50 LH ☚ Yellow 64 26 32 16 32 16+0.7 83 32

MTC-16S M16 x 2.00 RH Yellow 64 26 32 16 32 16+0.7 83 32


MTC-16L-F M16 x 1.50 RH ☚ Yellow 96 26 64 16 32 16+0.7 115 32

MTC-16L M16 x 2.00 RH Yellow 96 26 64 16 32 16+0.7 115 32


MTC-30S-X-M27-F-ZC M27 x 2.00 RH ☚ Silver 110 48 54 30 55 30+0.6 148 55

MTC-35S-X-M36-F-ZC M36 x 2.00 RH ☚ Silver 144 60 72 35 70 35+0.6 188 70

CATALOGS FROM MIDWEST CONTROL PRODUCTS CORP

Ball Joints Catalog Cable Controls Catalog Fabrications Catalog

Performance Catalog Rigid Linkages Catalog Spherical Rod Ends Catalog







MTCA (ALUMINUM METRIC CLEVIS)

AluminumDIN 71752

D

A

H

E

F I

ØB Thread

ØG

Part Number

Threads A ±2.0

B ±2.0

D ±2.0

E +0.5/-

0.0

F ±0.2/-

0.8

G -0.0

H ±2.0

I ±0.84

MTCA-4S M4 x 0.70 RH 16 8 8 4 8 4+0.5 21 8

MTCA-5S M5 x 0.80 RH 20 9 10 5 10 5+0.5 26 10

MTCA-5L M5 x 0.80 RH 30 9 20 5 10 5+0.5 36 10

MTCA-6S M6 x 1.00 RH 24 10 12 6 12 6+0.5 31 12

MTCA-6L M6 x 1.00 RH 36 10 24 6 12 6+0.5 43 12

MTCA-8S M8 x 1.25 RH 32 14 16 8 16 8+0.5 42 16

MTCA-8L M8 x 1.25 RH 48 14 32 8 16 8+0.6 58 16

MTCA-10S M10 x 1.50 RH 40 18 20 10 20 10+0.7 52 20

MTCA-10L M10 x 1.50 RH 60 18 40 10 20 10+0.7 72 20

MTCA-12S M12 x 1.75 RH 48 20 24 12 24 12+0.7 62 24

MTCA-12L M12 x 1.75 RH 72 20 48 12 24 12+0.7 86 24

MTCA-16S M16 x 2.00 RH 64 26 32 16 32 16+0.7 83 32


For Aluminum Rod Ends see our Spherical Rod Ends Catalog ->

Clevises







MTC-SS (STAINLESS METRIC CLEVISES)

300 Series Stainless SteelDIN 71752

Part Number Threads A ±2.0

B ±2.0

D ±2.0

E +0.5/-0.0

F ±0.2/-0.8

G -0.0

H ±2.0

I ±0.84

MTC-4S-SS M4 x 0.70 RH 16 8 8 4 8 4+0.5 21 8

MTC-5S-SS M5 x 0.80 RH 20 9 10 5 10 5+0.5 26 10

MTC-5L-SS M5 x 0.80 RH 30 9 20 5 10 5+0.5 36 10

MTC-6S-SS M6 x 1.00 RH 24 10 12 6 12 6+0.5 31 12

MTC-6L-SS M6 x 1.00 RH 36 10 24 6 12 6+0.5 43 12

MTC-8S-SS M8 x 1.25 RH 32 14 16 8 16 8+0.5 42 16

MTC-8L-SS M8 x 1.25 RH 48 14 32 8 16 8+0.6 58 16

MTC-10S-SS M10 x 1.50 RH 40 18 20 10 20 10+0.7 52 20

MTC-10S-F-SS M10 x 1.25 RH ☚ 40 18 20 10 20 10+0.7 52 20

MTC-10L-SS M10 x 1.50 RH 60 18 40 10 20 10+0.7 72 20

MTC-12S-SS M12 x 1.75 RH 48 20 24 12 24 12+0.7 62 24

MTC-12S-F-SS M12 x 1.25 RH ☚ 48 20 24 12 24 12+0.7 62 24

MTC-12L-SS M12 x 1.75 RH 72 20 48 12 24 12+0.7 86 24

MTC-16S-SS M16 x 2.00 RH 64 26 32 16 32 16+0.7 83 32

MTC-16S-F-SS M16 x 1.50 RH ☚ 64 26 32 16 32 16+0.7 83 32

MTC-16L-SS M16 x 2.00 RH 96 26 64 16 32 16+0.7 115 32

MTC-20S-F-SS M20 x 1.50 RH ☚ 80 34 40 20 40 20+0.6 105 40

MTC-30S-XM27F-SS M27 x 2.00 RH ☚ 110 48 54 30 55 30+0.6 148 55







TC & TCM Turnbuckle Clevises

Steel ConstructionPlated Zinc Yellow

Patented Spinning Barrel

P ATE

NT E

Dw

ww.m

idw

estc

ont ro

l.com

A

B

W

DJ

I F E

S

ØG

H

Thread

Part# Threads A B D E F G H I J S W

TC187 10-32 1.563 0.38 1.000 0.188 0.438 0.188 1.77 .38 .09 .312 .25

TC250 1/4-28 2.000 0.47 1.250 0.281 0.625 0.250 2.21 .51 .14 .375 .25

TC312 5/16-24 2.250 0.50 1.438 0.344 0.750 0.313 2.56 .59 .17 .437 .28

TC375 3/8-24 2.500 0.69 1.625 0.438 0.875 0.375 2.83 .69 .19 .562 .31

TC500 1/2-20 3.000 0.88 1.875 0.563 1.125 0.500 3.46 .94 .25 .750 .38

Metric Dimensions

TCM 5x20 M5 x 0.80 30 9 20 5 10 5 36 10 2.5 8 3.75

TCM 6x24 M6 x 1.00 36 10 24 6 12 6 43 12 3.0 8 4.0

TCM 8x16 M8 x 1.25 32 14 16 8 16 8 42 16 4.0 13 6.0

TCM 8x32 M8 x 1.25 48 14 32 8 16 8 58 16 4.0 13 6.0

TCM 10x20 M10 x 1.50 40 18 20 10 20 10 52 20 5.0 16 9.0

TCM 10x40 M10 x 1.50 60 18 40 10 20 10 72 20 5.0 16 9.0

TCM 12x24 M12 x 1.75 48 20 24 12 24 12 62 24 6.0 18 11.5

TCM 12x48 M12 x 1.75 72 20 48 12 24 12 86 24 6.0 18 11.5

TCM 16x32 M16 x 2.00 64 26 32 16 32 16 83 32 8.0 24 15.0

TCM 16x64 M16 x 2.00 96 26 64 16 32 16 115 32 8.0 24 15.0







Special Yoke Ends

MFC-B Bent Yokes

Plated Zinc Clear Forged Steel Construction

Thread

J

ØB

D

A

R

F

E

K ØG

I

Identical to the 280677 except for the dimensions shown to the right ->

A D K R

2.750 1.625 0.935 1.750

MFC-N Inset Yokes

ØG

I

Thread

J

E

F

ØB

AH

L

K

Part Number Thread A B E F G I K L

MFC-N-2803 3/8-24 RH 2.500 0.625 0.272 0.693 0.375 0.688 1.375 0.875

MFC-F Offset Yokes, Forged Steel

Plated Zinc Yellow

ØG

I

Thread

E

F

K

DA

B

Part Number Thread A B D E F G I K

MFC-F-2803 3/8-24 RH 2.000 0.625 1.625 0.438 0.875 0.375 0.688 0.640

MFC-FL-2803 3/8-24 LH 2.000 0.625 1.625 0.438 0.875 0.375 0.688 0.640

MFC-F-2806 1/2-20 RH 2.250 0.813 1.875 0.563 1.125 0.500 0.938 0.828







MFC (FORGED YOKE ENDS)

Forged 1018 Steel Housing

ØG

I

Thread

J

E

F

ØB

D

AH

☚ = standard/common item. This table is sorted by the following order: 1st: Threads, 2nd: G, 3rd: A

Un-plated (Plain)

Plated Zinc Yellow

Plated Zinc Clear

Threads A B D E F G H I J

2800 280077 ☚ 280080 10-32 RH 1.563 .313 1.000 .188 .438 .188 1.77 .38 .09

- 28031077 - 10-32 RH 2.500 .625 1.625 .438 .875 .188 2.83 .69 .19

- 28012277 - 10-32 RH 2.000 .438 1.250 .281 .625 .197 2.21 .50 .14

280117 28011777 ☚ 28011780 10-32 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

- 28012177 - 10-32 RH 2.000 .438 1.250 .281 .625 .261 2.21 .50 .14

280205 28020577 - 10-32 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28013077 - M5x0.80 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

- - 28031380 M6x1.00 RH 2.500 .625 1.625 .438 .875 .244 2.83 .69 .19

280119 28011977 28011980 M6x1.00 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

28030102 2803010277 - M6x1.00 RH 1.375 .625 0.844 .438 .875 .414 1.71 .69 .19

280107 28010777 28010780 1/4-20 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

- 28033077 - 1/4-28 RH 2.500 .625 1.625 .438 .875 .188 2.83 .69 .19

280101 28010177 - 1/4-28 RH 2.000 .438 1.250 .281 .625 .201 2.21 .50 .14

2801 280177 ☚ 280180 1/4-28 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

- 28010877 - 1/4-28 RH 2.000 .438 1.250 .281 .625 .256 2.21 .50 .14

280103 28010377 - 1/4-28 RH 2.000 .438 1.250 .281 .625 .275 2.21 .50 .14







Un-plated (Plain)

Plated Zinc Yellow

Plated Zinc Clear


- 2803011077 - 1/4-28 RH 1.375 .625 0.844 .438 .875 .313 1.71 .69 .19

280204 28020477 - 1/4-28 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28020877 - 1/4-28 RH 2.250 .500 1.438 .344 .750 .315 2.56 .59 .17

- 28023077 - 1/4-28 RH 2.250 .500 1.438 .344 .750 .316 2.56 .59 .17

280209 28020977 - 1/4-28 RH 2.250 .500 1.438 .344 .750 .355 2.56 .59 .17

- 2803011177 - 1/4-28 RH 1.375 .625 0.844 .438 .875 .375 1.71 .69 .19

280314 28031477 - 1/4-28 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 28033677 - 1/4-28 LH 2.500 .625 1.625 .438 .875 .190 2.83 .69 .19

- 28011877 ☚ - 1/4-28 LH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

280226 - - 0.317Ø hole 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

280203 28020377☚ - 5/16-18 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28033577 - 5/16-18 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 28011377 - 5/16-24 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

- 28022577 28022580 5/16-24 RH 2.250 .500 1.438 .344 .750 .250 2.56 .59 .17

2802 280277 ☚ 280280 5/16-24 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28033377 - 5/16-24 RH 2.500 .625 1.625 .438 .875 .313 2.83 .69 .19

- 28032877 - 5/16-24 RH 2.500 .625 1.625 .438 .875 .344 2.83 .69 .19

280305 28030577 - 5/16-24 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

280326 28032677 - 5/16-24 RH 2.120 .625 1.625 .438 .875 .376 2.45 .69 .19

- 28030377 - 5/16-24 RH 2.500 .625 1.625 .438 .875 .394 2.83 .69 .19

280614 28061477 - 5/16-24 RH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

- 28020777☚ - 5/16-24 LH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28032577 - 5/16-24 LH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 28031577 - M8x1.25 RH 2.244 .625 1.614 .433 .866 .250 2.58 .67 .19

280240 28024077 - M8x1.25 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

28030106 2803010677 - 3/8-16 RH 1.375 .625 0.844 .438 .875 .312 1.71 .69 .19

280304 28030477☚ - 3/8-16 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19







Forged 1018 Steel Housing

ØG

I

Thread

J

E

F

ØB

D

AH

Un-plated (Plain)

Plated Zinc Yellow

Plated Zinc Clear


- - 28032980 3/8-16 RH 2.500 .625 1.625 .438 .875 .399 2.83 .69 .19

- 28030977 28030980 3/8-24 RH 2.500 .625 1.625 .438 .875 .250 2.83 .69 .19

- 28031177 28031180 3/8-24 RH 2.500 .625 1.625 .438 .875 .312 2.83 .69 .19

280616 28061677 - 3/8-24 RH 3.000 .813 1.875 .563 1.125 .313 3.46 .94 .25

- 28021377 - 3/8-24 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

- 28030177☚ - 3/8-24 RH 1.375 .625 0.844 .438 .875 .375 1.71 .69 .19

- 28030277 - 3/8-24 RH 1.750 .625 1.188 .438 .875 .375 2.09 .69 .19

2803 280377 ☚ 280380 3/8-24 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 290377 - 3/8-24 RH 3.000 .625 2.125 .438 .875 .375 3.34 .69 .19

28060101 2806010177 - 3/8-24 RH 1.813 .813 1.125 .563 1.125 .438 2.27 .94 .25

- 2806010577 - 38-24 RH 1.813 .813 1.125 .661 1.125 .500 2.27 .94 .25

280613 28061377 - 3/8-24 RH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

- - 28031780 3/8-24 LH 2.500 .625 1.625 .438 .875 .311 2.83 .69 .19

- 2803010477 - 3/8-24 LH 1.375 .625 0.844 .438 .875 .375 1.71 .69 .19

280306 28030677☚ 28030680 3/8-24 LH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 28062577 - 3/8-24 LH 3.000 .813 1.875 .563 1.125 .404 3.46 .94 .25

280615 - - 0.391Ø hole 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

- YM10-P - M10x1.50 RH 2.500 .625 1.625 .438 .875 .394 2.83 .69 .19







Un-plated (Plain)

Plated Zinc Yellow

Plated Zinc Clear


- 28032777 - M10x1.50 RH 2.500 .625 1.625 .438 .875 .400 2.83 .69 .19

- 280477 ☚ - 7/16-20 RH 2.875 .719 1.875 .500 1.000 .437 3.28 .81 .22

- 2806014877 - 7/16-20 RH 1.813 .813 1.125 .563 1.125 .483 2.27 .94 .25

- YM12S - M12x1.75 RH 1.813 .813 1.125 .563 1.125 .472 2.27 .94 .25

28060103 2806010377 - 1/2-13 RH 1.813 .813 1.125 .563 1.125 .500 2.27 .94 .25

280605 28060577☚ - 1/2-13 RH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

280617 28061777 - 1/2-13 LH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

- 2806012777 - 1/2-20 RH 1.813 .813 1.125 .563 1.125 .266 2.27 .94 .25

28060102 2806010277 - 1/2-20 RH 1.813 .813 1.125 .563 1.125 .312 2.27 .94 .25

280631 28063177 - 1/2-20 RH 3.000 .813 1.875 .563 1.125 .313 3.46 .94 .25

- 2803010577 - 1/2-20 RH 1.375 .625 0.844 .438 .875 .375 1.71 .69 .19

- 28034677 - 1/2-20 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

280637 28063777 - 1/2-20 RH 3.000 .813 1.875 .563 1.125 .375 3.46 .94 .25

280601 28060177☚ - 1/2-20 RH 1.813 .813 1.125 .563 1.125 .500 2.27 .94 .25

2806 280677 ☚ 280680 1/2-20 RH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

2805 280577 280580 1/2-20 RH 4.188 .813 3.188 .563 1.125 .500 4.66 .94 .25

- 28060277 - 1/2-20 RH 3.000 .813 1.875 .563 1.125 .503 3.46 .94 .25

280316 28031677 - 1/2-20 LH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

- 2806030177 - 1/2-20 LH 1.813 .813 1.125 .563 1.125 .500 2.27 .94 .25

280603 28060377☚ - 1/2-20 LH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

- - 28062480 0.515Ø hole 3.000 .813 1.875 .563 1.125 .515 3.46 .94 .25

- 28061877 - 0.534Ø hole 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

280705 28070577 - 5/8-11 RH 4.938 1.06 3.688 .688 1.375 .625 5.53 1.19 .31

2807 280777 ☚ - 5/8-18 RH 4.938 1.06 3.688 .688 1.375 .625 5.53 1.19 .31

- 28080577 - 3/4-10 RH 6.063 1.25 4.562 .813 1.625 .750 6.78 1.44 .38

- 280877 ☚ - 3/4-16 RH 6.063 1.25 4.562 .813 1.625 .750 6.78 1.44 .38

When designing yokes, you may economically choose any thread and G dimension. Avoid modifying the other dimensions as they are controlled by the parent forging.







MFC-SS (STAINLESS STEEL YOKES)

300 Series Forged Stainless Steel

ØG

I

Thread

J

E

F

ØB

D

AH

Part Number Threads A B D E F G H I J

2800SS 10-32 RH 1.563 .313 1.000 .188 .438 .188 1.77 .38 .09

2801SS 1/4-28 RH 2.000 .438 1.250 .281 .625 .250 2.21 .50 .14

2802SS 5/16-24 RH 2.250 .500 1.438 .344 .750 .313 2.56 .59 .17

2803SS 3/8-24 RH 2.500 .625 1.625 .438 .875 .375 2.83 .69 .19

2806SS 1/2-20 RH 3.000 .813 1.875 .563 1.125 .500 3.46 .94 .25

<- We offer stainless clevis pins

Our Fabricating Catalog describes our stainless fabricating capabilities.

<- We offer a full line of stainless components.


Clevises







FORGED MALE YOKE ENDS

Forged 1018 Steel

E F

D

XY

XX ØG

I

THREAD

A

FLASH ALLOWANCE +.06/-0.0

WIRE ØB

Part Number Thread A B D E F G I

2811 1/4-28 1.750 0.250 0.625 0.281 0.625 0.250 0.500

2812 5/16-24 2.000 0.313 0.750 0.344 0.750 0.313 0.594

2813 3/8-24 2.125 0.375 0.844 0.438 0.875 0.375 0.688

2913 3/8-24 3.500 0.375 0.844 0.438 0.875 0.375 0.688

2814L 7/16-20 2.500 0.438 1.000 0.500 1.000 0.438 0.813

2815 1/2-20 2.500 0.500 1.125 0.563 1.125 0.500 0.938

2817 5/8-18 2.875 0.625 1.438 0.6875 1.375 0.625 1.188

THREADED MALE YOKES - STANDARD DESIGNS. FOR LEFT HAND, ADD “-L”.

Part Number Thread XX XY D E F G I

TMY-4 1/4-28 2.500 1.000 0.625 0.281 0.625 0.250 0.500

TMY-5 5/16-24 2.625 1.250 0.750 0.344 0.750 0.313 0.594

TMY-6 3/8-24 2.625 1.250 0.844 0.438 0.875 0.375 0.688

TMY-7 7/16-20 3.000 1.375 1.000 0.500 1.000 0.438 0.813

TMY-8 1/2-20 4.500 2.500 1.125 0.563 1.125 0.500 0.938

TMY-10 5/8-18 6.000 2.500 1.438 0.6875 1.375 0.625 1.188Buy On-Line at www.midwestcontrol.comNo Minimums. 3,000+ items.







MHC (HALF CLEVISES)

Forged 1018 Steel, Plated Zinc Yellow

L

C M

Ø G D

N P

H A

J

B I

THREAD

Ø S

E F W

Part# Thread A B C D E F G H I J L M N P S

MHC-250 1/4-28 2.00 .375 .19 1.625 .325 .403 .2455 2.14 .44 .17 .469 .38 .05 .222 .088

MHC-312 5/16-24 2.25 .438 .19 1.812 .400 .501 .3080 2.42 .53 .19 .500 .44 .05 .249 .119

MHC-375 3/8-24 2.50 .562 .26 1.969 .494 .594 .3705 2.71 .63 .21 .688 .53 .06 .281 .119

MHC-375-1 3/8-24 2.50 .562 .26 1.969 .369 .469 .3705 2.71 .63 .21 .688 .53 .06 .281 .119

MHC-375S 1/4-28 2.50 .562 .26 1.969 .427 .566 .3705 2.71 .63 .21 .688 .53 .06 .281 .112

MHC-500 1/2-20 3.00 .750 .38 2.292 .639 .791 .4955 3.26 .81 .27 .875 .71 .06 .334 .151

Our Half Clevises are a unique solution for tight clearance applications for cable or rigid linkages.

We offer standard

and custom rods.

See our Cables Catalog for stan-dard and custom cables and pieces

See our Fabricating Catalog forour unique SCV formed

rod.


Clevises







CTE (CABLE TERMINAL EYES)

F

C B

Ø A

G

D

( H - Radius)

K

JE

Part# A B C D E F G H J K

CTE-072-276 0.276 1.400 0.240 0.072 Ø 0.515 0.0930 0.562 0.280 0.375 1.000

CTE-093-250 0.250 1.400 0.240 0.093 Ø 0.515 0.0930 0.562 0.280 0.375 1.000

CTE-113-260 0.260 1.400 0.240 0.113 Ø 0.515 0.1200 0.562 0.280 0.375 1.000

CTE-113-276 0.276 1.400 0.240 0.113 Ø 0.515 0.1200 0.562 0.280 0.375 1.000

CTE-113-381 0.381 1.400 0.240 0.113 Ø 0.515 0.1200 0.562 0.280 0.375 1.000

CTE-2F-265-1 0.265 1.830 0.410 8-32 RH 0.750 0.2375 0.750 0.500 0.375 1.000

CTE-2F-265 0.265 1.470 0.410 8-32 RH 0.750 0.2375 0.562 0.500 0.375 1.000

CTE-2F-329-1 0.329 1.830 0.410 8-32 RH 0.750 0.2375 0.750 0.500 0.375 1.000

CTE-2F-329 0.329 1.470 0.410 8-32 RH 0.750 0.2375 0.562 0.500 0.375 1.000

CTE-2F-375 0.375 1.470 0.410 8-32 RH 0.750 0.2375 0.562 0.500 0.375 1.000

CTE-2F-386-1 0.386 1.470 0.410 8-32 RH 0.750 0.2375 0.562 0.500 0.375 1.000

CTE-2F-386-2 0.386 1.470 0.410 8-32 RH 0.750 0.2375 0.750 0.500 0.375 1.000

CTE-2F-386 0.386 1.100 0.410 8-32 RH 0.515 0.1400 0.562 0.750 0.375 0.700

CTE-2F-500 0.500 1.830 0.410 8-32 RH 0.750 0.2375 0.750 0.500 0.375 1.000

CTE-3F-265 0.265 1.830 0.410 10-32 RH 0.750 0.2375 0.750 0.500 0.375 1.000

CTE-3F-323 0.323 1.820 0.380 10-32 RH 0.555 0.2450 0.750 0.500 0.375 1.000

CTE-4F-329 0.329 1.470 0.410 1/4-28 RH 0.750 0.2375 0.562 0.500 0.375 1.000







DCA (DUAL CARB ADJUSTORS)

Steel ConstructionPolished Chrome Plated

<------------------------ Adjusting Screw Provides Finite Adjustment!

G

W TT H

External Thread Internal Thread

L B

C

Part Number Stem Thread

Set Screw Thread

B C G H L T W

DCA-3R 10-32 RH 8-32 RH 0.500 0.215 1.140 0.890 2.510 0.075 0.210

DCA-3L 10-32 LH 8-32 RH 0.500 0.215 1.140 0.890 2.510 0.075 0.210

DCA-4R 1/4-28 RH 10-32 RH 0.750 0.325 1.500 1.125 3.145 0.100 0.270

DCA-4L 1/4-28 LH 10-32 RH 0.750 0.325 1.500 1.125 3.145 0.100 0.270

DCA-5R 5/16-24 RH 1/4-28 RH 1.000 0.440 1.875 1.500 4.130 0.125 0.333

DCA-5L 5/16-24 LH 1/4-28 RH 1.000 0.440 1.875 1.500 4.130 0.125 0.333

Refer to our Rigid Linkages catalog for our standard connecting tubes.

Refer to our Spherical Rod End catalog forinformationon our

MCR seriesMulti Carburetor

Spherical Rod Ends


Clevises







DME (DIN Metric Valve Rod Ends)

Steel Construction, Plated Zinc Clear D

J

ØG ØC

A P

Thread

R (Radius)

Part Number Thread A C D G J P R

DME-4 M3.5 x 0.60 RH 4.0 8.0 12.0 4.1 16.0 4.0 4.0

DME-5 M5 x 0.80 RH 6.0 10.0 16.0 6.1 21.0 6.0 5.0

DME-8 M8 x 1.25 RH 6.0 14.0 20.0 8.1 27.0 10.0 7.0

DME-10 M10 x 1.50 RH 8.0 18.0 25.0 8.1 29.5 12.0 9.0

DME-14 M14 x 1.50 RH 19.0 25.0 40.0 14.1 53.0 14.0 12.5

Fabrications Catalog Performance Catalog Rigid Linkages Catalog

See our Spherical RodEnd catalog for ourcomplete lineof rod end bearings.


<- See our Rigid Link-ages catalog for our various standard con-necting linkages and rods.


Clevises







DVF (Valve Rod Ends)

Steel Construction, Plated Zinc Yellow

A

K

B

E

F

Thread ØG

D

Hex Shape Housing

J

Part# Threads Material A B D E F G J K

DV4F-1930 1/4-28 RH 0.4375 Hex 0.500 0.652 0.312 0.250 0.4375 0.193 1.312 0.600

DV4F-2525 1/4-28 RH 0.4375 Hex 1.250 0.812 0.312 0.320 0.4375 0.253 2.562 1.500

DV4F-2530 1/4-28 RH 0.4375 Hex 0.500 0.652 0.312 0.250 0.4375 0.253 1.312 0.600

DV4F-2650 1/4-28 RH 0.4375 Hex 0.500 1.152 0.312 0.250 0.4375 0.265 1.812 0.600

DV6F-1890 3/8-24 RH 0.5625 Hex 1.125 1.060 0.378 0.240 0.5625 0.189 2.685 1.375

DV6F-2525 3/8-24 RH 0.5625 Hex 1.125 1.060 0.378 0.320 0.5625 0.253 2.685 1.375

DV6F-3154 3/8-24 RH 0.5625 Hex 1.125 1.060 0.378 0.227 0.5625 0.315 2.685 1.375

PVC (Direct Valve Mount Pivots)Steel Construction,

Plated Zinc Yellow

A

K B

E

F

Thread

D

Hex Shape Housing

ØG(Typ)

C

J

Part# Threads Material A B C D E F G J K

PV8C-4-5 1/2-13 RH 0.625 Hex 1.500 1.625 1.035 1.035 0.245 0.625 0.254 3.625 1.750







GMN (Aluminum) & GMNSS (Stainless) Eye Ends

GMN - AluminumGMNSS - Stainless

E

B

Ø C

ØF

A

D

Threads

G

Part Number Threads A B C D E F G

Aluminum Stainless

GMN-4 GMNSS-4 M4 x 0.70 RH 12 4.0 4.10 7 4 8 16.0

GMN-6 GMNSS-6 M6 x 1.00 RH 16 6.0 6.10 9 6 10 19.0

GMN-6-1 GMNSS-6-1 M6 x 1.00 RH 26 11.0 6.10 12 5 14 33.0

GMN-6-2 GMNSS-6-2 M6 x 1.00 RH 26 11.0 8.10 12 5 14 33.0

GMN-8 GMNSS-8 M8 x 1.25 RH 19 5.0 8.10 13 10 15 26.5

GMN-8-1 GMNSS-8-1 M8 x 1.25 RH 30 11.5 8.10 16 10 18 39.0

GMN-8-2 GMNSS-8-2 M8 x 1.25 RH 30 11.5 10.10 16 10 18 39.0

GMN-10 GMNSS-10 M10 x 1.50 RH 30 11.5 8.10 16 10 18 39.0

GMN-14 GMNSS-14 M14 x 1.50 RH 27 8.0 14.10 17 14 22 38.0

GMN-14-1 GMNSS-14-1 M14 x 1.50 RH 38 19.0 14.10 17 14 22 38.0

See our Ball Joints Catalog for

our broad range of ball joints.


Clevises







GMP (Nylon Eye End)

GMPNylon HousingBrass Threads

Ø C D

A E

ØB

Threads

F

Radius R

Part Number Thread A B C D E F R

GMP-6 M6 x 1.00 RH 6.10 8.89 17.78 8.89 7.11 14.73 7.9

GMP-8 M8 x 1.25 RH 7.87 13.97 21.34 8.89 8.89 20.32 10.7

GMW (Steel Eye End)Steel Construction, Plated Zinc Clear

A

Ø C Chamfer Both Ends

D

Radius E

B

Threads

F

2 x Dim E

Part Number Thread A B C+0.2 D E F

GMW-6 M6 x 1.00 19 11.5 8.10 10 8 27

GMW-8 M8 x 1.25 16 9.0 6.10 10 8 24

GMW-8-1 M8 x 1.25 18 9.0 6.10 10 8 26

GMW-8-2 M8 x 1.25 20 9.0 7.28 10 8 28

GMW-8-3 M8 x 1.25 15 9.0 8.10 8 8 23

GMW-8-4 M8 x 1.25 16 9.0 8.10 12 8 24

GMW-8-5 M8 x 1.25 16 9.0 8.10 10 8 24

GMW-8-6 M8 x 1.25 17 9.0 8.10 10 8 25

GMW-8-7 M8 x 1.25 20 9.0 8.10 10 8 28

GMW-10 M10 x 1.50 20 14.0 8.10 12 8 28







MAE (Forged Adjustable Eye Ends)

Forged Steel Housing, Plated Zinc Yellow

MP

C D

E

ØG

H

J

K

Thread

Part# Threads C D E G H J K M P

MAE-4 1/4-28 RH 1.312 0.406 0.343 0.250 0.625 0.562 0.109 0.281 0.375

MAE-5 5/16-24 RH 1.375 0.406 0.400 0.313 0.642 0.654 0.127 0.344 0.438

MAE-6 3/8-24 RH 1.625 0.531 0.465 0.375 0.719 0.750 0.142 0.438 0.562

MAE-8 1/2-20 RH 2.125 0.688 0.624 0.500 0.937 1.000 0.188 0.563 0.750

MAE-10 5/8-11 RH 2.657 0.313 0.750 0.625 1.219 1.250 0.250 0.688 0.875

MAE-12 3/4-10 RH 3.250 1.000 0.874 0.750 1.500 1.500 0.313 0.813 1.000

We offer componentsand assemblies.


We offer standard

threaded rods.


Clevises







TEE (Forged Steel) & CRE (Chromed Steel)

TEE = Forged Steel, Plated Zinc YellowCRE = Turned Steel, Chrome Plated

XY ØG

XX

Thread

E

ØD

Turned Steel, Bright Chrome Plated

Description Threads XX XY D E G

CRE-8 1/2-20 RH 2.437 1.500 1.312 0.625 0.500

CRE-10 5/8-18 RH 2.625 1.625 1.500 0.750 0.625

CRE-12 3/4-16 RH 2.875 1.750 1.750 0.875 0.750

CRE-12-8 3/4-16 RH 2.875 1.750 1.500 0.875 0.500

CRE-12-10 3/4-16 RH 2.500 1.650 1.500 0.875 0.625

CRE-12-10-1 3/4-16 RH 2.875 1.750 1.750 0.875 0.625

Forged Steel, Plated Zinc Yellow

Description Threads XX XY D E G

TEE-4 1/4-28 RH 1.750 1.000 0.500 0.281 0.250

TEE-5 5/16-24 RH 1.875 1.250 0.594 0.344 0.313

TEE-6 3/8-24 RH 1.875 1.250 0.688 0.438 0.375

TEE-8 1/2-20 RH 3.500 2.500 0.938 0.563 0.500

TEE-10 5/8-18 RH 3.500 2.500 1.188 0.688 0.625

Custom Lengths and Configurations are Available!








PMC (Chrome Moly) & SS-PMC (Stainless) Clevises

PMC: 4130 Chrome Moly SteelSS-PMC: 300 Series Stainless

For LH Thread, specify “L” as in PMCL

I

A L

D

J

E

F

Thread

Ø G

Part Number Thread A D E F G I J L

Steel Stainless

PMC-3 SS-MPC-3 10-32 2.000 0.750 0.125 0.438 0.188 0.375 0.157 1.000

PMC-4-3 SS-PMC-4-3 1/4-28 2.250 0.750 0.125 0.438 0.188 0.500 0.157 1.250

PMC-5-4 SS-PMC-5-4 5/16-24 2.250 0.750 0.188 0.625 0.250 0.875 0.219 1.250

PMC-5 SS-PMC-5 5/16-24 2.250 0.750 0.188 0.750 0.313 0.875 0.281 1.250

PMC-6-4 SS-PMC-6-4 3/8-24 2.000 0.750 0.250 0.625 0.250 0.875 0.188 1.000

PMC-6-5 SS-PMC-6-5 3/8-24 2.250 0.750 0.188 0.750 0.313 0.875 0.281 1.250

PMC-8-5 SS-PMC-8-5 1/2-20 2.500 0.750 0.250 0.750 0.313 1.000 0.250 1.500

PMC-8-6 SS-PMC-8-6 1/2-20 2.500 0.750 0.250 0.875 0.375 1.000 0.313 1.500

PMC-8-6A SS-PMC-8-6A 1/2-20 2.750 1.000 0.313 0.875 0.375 1.000 0.281 1.500

PMC-8-6B SS-PMC-8-6B 1/2-20 2.750 1.000 0.375 0.875 0.375 1.000 0.250 1.500

PMC-10-6 SS-PMC-10-6 5/8-18 3.375 1.125 0.375 0.875 0.375 1.125 0.250 2.000

PMC-10-7 SS-PMC-10-7 5/8-18 3.375 1.125 0.375 1.000 0.438 1.125 0.313 2.000

PMC-10-8 SS-PMC-10-8 5/8-18 3.375 1.125 0.375 1.125 0.500 1.300 0.375 2.000

PMC-12-6 SS-PMC-12-6 3/4-16 3.375 1.125 0.375 0.875 0.375 1.125 0.250 2.000

PMC-12-8 SS-PMC-12-8 3/4-16 3.375 1.125 0.250 1.125 0.500 1.300 0.438 2.000

PMC-12-8A SS-PMC-12-8A 3/4-16 3.375 1.125 0.375 1.125 0.500 1.300 0.375 2.000







PWF (Weld-In Female Clevises)

Machined from 4130 Chrome Moly Steel L

A

ØB

H

I

J (TYP)

K D Ø G

E F

N

ØM

ØC

Part Number A B C D E F G H I J K L M N

PWF-3-152-133 1.375 0.152 na 0.563 0.133 0.438 0.188 1.656 0.494 0.153 na 0.563 0.512 0.265

PWF-3-197-156 1.375 0.197 na 0.563 0.156 0.438 0.188 1.656 0.487 0.141 na 0.563 0.512 0.265

PWF-3-256-133 0.875 0.256 0.125 0.350 0.132 0.285 0.189 1.062 0.325 0.080 0.100 0.220 0.375 0.250

PWF-3-277-133 1.375 0.277 na 0.563 0.133 0.438 0.188 1.656 0.494 0.153 na 0.563 0.512 0.265

PWF-3-322-156 1.375 0.322 na 0.563 0.156 0.438 0.188 1.656 0.487 0.141 na 0.563 0.512 0.265

PWF-3-322-188 1.375 0.321 na 0.563 0.188 0.438 0.188 1.656 0.476 0.125 na 0.563 0.512 0.265

PWF-4-152-250 1.890 0.152 na 0.750 0.250 0.625 0.250 2.265 0.663 0.188 na 0.750 0.709 0.334

PWF-4-384-125 1.890 0.384 0.144 0.750 0.125 0.625 0.250 2.265 0.697 0.250 0.660 0.750 0.709 0.334

PWF-4-384-188 1.890 0.384 0.144 0.750 0.188 0.625 0.250 2.265 0.683 0.219 0.660 0.750 0.709 0.334

PWF-4-384-281 1.890 0.384 0.144 0.750 0.281 0.625 0.250 2.265 0.651 0.172 0.660 0.750 0.709 0.334

PWF-4-527-250 1.875 0.527 0.287 0.750 0.250 0.625 0.250 2.250 0.663 0.188 0.660 0.750 0.709 0.334

PWF-5-509-125 2.250 0.509 0.269 0.938 0.125 0.750 0.313 2.719 0.857 0.313 0.848 0.938 0.866 0.433

PWF-5-527-313 2.250 0.527 0.287 0.938 0.313 0.750 0.313 2.719 0.808 0.219 0.848 0.938 0.866 0.433

PWF-5-634-188 2.250 0.634 0.394 0.938 0.188 0.750 0.313 2.719 0.845 0.281 0.848 0.938 0.866 0.433

PWF-5-634-344 2.250 0.634 0.394 0.938 0.344 0.750 0.313 2.719 0.795 0.203 0.848 0.938 0.866 0.433

PWF-6-277-375 2.750 0.277 na 1.125 0.375 0.875 0.375 3.313 0.910 0.250 na 1.125 0.984 0.451

PWF-6-634-188 2.750 0.634 0.394 1.125 0.188 0.875 0.375 3.313 0.966 0.344 1.035 1.125 0.984 0.451

PWF-6-759-188 2.750 0.750 0.519 1.125 0.188 0.875 0.375 3.313 0.966 0.344 1.035 1.125 0.984 0.451

PWF-6-834-375 2.750 0.834 0.594 1.125 0.375 0.875 0.375 3.313 0.910 0.250 1.035 1.125 0.984 0.451

PWF-6-884-188 2.750 0.884 0.644 1.125 0.188 0.875 0.375 3.313 0.966 0.344 1.035 1.125 0.984 0.451

PWF-6-884-250 2.750 0.884 0.644 1.125 0.250 0.875 0.375 3.313 0.952 0.313 1.035 1.125 0.984 0.451

PWF-6-1009-250 2.750 1.009 0.769 1.125 0.250 0.875 0.375 3.313 1.154 0.313 1.035 1.125 1.181 0.793







MFIR (Isolated Rod Ends)

Steel Housing and SpacerElastomeric Rubbing Isolating Bushing

Housing and Spacer Plated Zinc Yellow

G

P

H

O

Thread

C

N

A

J

Part Number Thread A C G H J N O P

MFIR-6 3/8-24 RH 0.380 2.780 2.125 1.160 1.312 0.980 0.875 0.750

MFIR-6-LH 3/8-24 LH 0.380 2.780 2.125 1.160 1.312 0.980 0.875 0.750

MFIR-8 1/2-20 RH 0.500 2.780 2.125 1.160 1.312 0.980 0.875 0.750

MFIR-8-LH 1/2-20 LH 0.500 2.780 2.125 1.160 1.312 0.980 0.875 0.750

See our Fabrications Catalog to learn more about our isolated fabs.

See our Fabrications Catalog to learn more about our isolated fabs.

We also fabricate custom and standard connecting linkages.

We offer componentsand assemblies.


our broad range of ball joints.

Our MPF nylon raced rod ends

also providedampening


Clevises







Swivels (also called ‘Pivots’)

Construction: 12L14 Steel, Zinc Plated

G

D

E

F ØA

ØB

ØC T

Construction Style "B"(Hole Orientation at 90°)

H

Part# Thread A B C D E F G H Plating Color

Style

S188F339-081 ZY 10-32 0.081 0.247 0.438 0.181 0.129 0.158 0.158 0.625 Yellow B

S188F370-093 ZY 10-32 0.093 0.311 0.438 0.170 0.095 0.200 0.250 0.715 Yellow A

S188F424-081 ZY 10-32 0.081 0.185 0.438 0.236 0.107 0.188 0.188 0.718 Yellow B

S188F466-093 ZY 10-32 0.093 0.227 0.438 0.276 0.094 0.190 0.190 0.750 Yellow B

S188F490-081-A ZY 10-32 0.081 0.247 0.438 0.335 0.136 0.155 0.155 0.781 Yellow A

S188F490-081-B ZY B

S188C537-097ZY 8-32 0.097 0.247 0.438 0.346 0.104 0.191 0.139 0.780 Yellow A

S188F780-125 ZY 10-32 0.125 0.315 0.500 0.280 0.119 0.500 0.191 1.090 Yellow A

S250F462-081 ZY 1/4-28 0.081 0.310 0.500 0.181 0.163 0.281 0.281 0.906 Yellow B

S250F507-076 ZY 1/4-28 0.076 0.247 0.500 0.171 0.100 0.336 0.245 0.852 Yellow A

S250F550-091 ZY 1/4-28 0.091 0.250 0.500 0.301 0.199 0.249 0.251 1.000 Yellow A

S250F595-110 ZY 1/4-28 0.110 0.435 0.748 0.276 0.120 0.319 0.245 0.960 Yellow B

S250F510-097 ZY 1/4-28 0.097 0.311 0.500 0.195 0.143 0.315 0.242 0.895 Yellow B

S312C564-112 ZY 5/16-18 0.112 0.313 0.500 0.360 0.160 0.204 0.236 0.960 Yellow A

S312C679-109ZY 5/16-18 0.109 0.312 0.500 0.460 0.133 0.219 0.219 1.030 Yellow A

S312C694-109ZB 5/16-18 0.109 0.375 0.750 0.371 0.129 0.323 0.240 1.063 Black A

S312785-127 ZC 5/16-18 0.127 0.365 0.750 0.410 0.140 0.375 0.375 1.300 Clear A







Part# Thread A B C D E F G H Plating Color

Style

S312C786-105ZY 5/16-18 0.105 0.310 0.500 0.521 0.126 0.204 0.236 1.087 Yellow A

S312F820-136 ZY 5/16-24 0.136 0.370 0.625 0.531 0.156 0.289 0.289 1.265 Yellow B

S8mm-374 ZY M8x1.25 0.132 0.374 0.625 0.449 0.142 0.488 0.244 1.323 Yellow B

S8mmLH-374 ZY M8x1.25LH 0.132 0.374 0.625 0.449 0.142 0.488 0.244 1.323 Yellow B

S328B727-109-5ZC 0.328Ø 0.109 0.313 0.750 0.414 0.117 0.313 0.250 1.094 Clear A

S328B727-109-6ZC 0.328Ø 0.109 0.375 0.750 0.414 0.117 0.313 0.250 1.094 Clear A

S328B785-127ZC 0.328Ø 0.127 0.365 0.750 0.410 0.140 0.375 0.375 1.300 Clear A

S330B768-107ZY 0.330Ø 0.107 0.312 0.5sq 0.388 0.152 0.380 0.300 1.220 Yellow A

S375C643-117 ZY 3/8-16 0.117 0.375 0.625 0.328 0.162 0.315 0.317 1.120 Yellow A

S375C690-109ZY 3/8-16 0.109 0.312 0.625 0.410 0.120 0.280 0.280 1.090 Yellow A

S375C696-129ZC 3/8-16 0.129 0.370 0.625 0.350 0.150 0.375 0.375 1.250 Clear A

S375C1156-093ZY 3/8-16 0.093 0.310 0.625 0.500 0.125 0.656 0.375 1.656 Yellow A

S391B500-000ZY 0.391Ø na 0.370 0.750 0.500 na 0.375 0.375 1.250 Yellow na

S500C6125 ZY 1/2-13 0.219 0.613 1.000 0.635 0.235 0.880 0.500 2.250 Yellow A

S500CLH6125ZY 1/2-13LH 0.219 0.613 1.000 0.635 0.235 0.880 0.500 2.250 Yellow A

S625C6125 ZY 5/8-11 0.219 0.613 1.000 0.635 0.235 0.880 0.500 2.250 Yellow A

S625CLH6125 ZY 5/8-11LH 0.219 0.613 1.000 0.635 0.235 0.880 0.500 2.250 Yellow A

Buy complete assemblies from MCP

Standard and custom components offered


our broad range of ball joints.See our Cables Catalog for stan-

dard and custom cables and pieces


Clevises







BWS (Barrel Style Wire Stop)

Steel Construction, Plated Zinc Clear

B

D

C

ØG Thru

A

E

F

Part Number A B C D E F G

BWS-096 0.232 0.280 0.340 0.190 0.215 0.05 0.096

WS (Wire Stop)Steel Construction, Plated Zinc Clear

.36

.13

.335

Thread

.75

.0787

G

F

D

E

B

R

C

H

ØA ØJ

Thread

Part Number Thead A B C D E F G H J R

WS088-373-099-188 FZC M5 x 0.80 .095 .248 .438 .261 .114 .112 .273 .760 .088 .365

WS088-480-099-188 FZC M5 x 0.80 .095 .248 .438 .368 .112 .112 .268 .860 .088 .368


See our Spherical RodCatalog for our wide

selection of spherical rod ends.

Clevises







Other Products by Midwest Control Products Corp(A) Rod End Assys (B) Misalignment Inserts (C) Welded Fabrications (D) Quick Disconnects

(E) Special Cables (F) Studded Rod Ends (G) Joysticks (H) Large Assemblies

(J) Zinc Alloy Ball Joints (K) Tube Fabrications (L) Yoke Assemblies (M) Special Rod Fabs

(N) Studded Rod Ends (O) Ball Joint Linkages (P) Rod End Seals (Q) Vernier Controls

(R) Wireforms (S) Custom Cables (T) Hardware (V) Unique Ball Joints







Midwest Control Products CorpMidwest Control Products Corp has six major product catalogs

Ball Joints Cable Controls Clevises

Fabrications Rigid Linkages Spherical Rod Ends

Visit our website to find our worldwide sales offices and internet distribution systems. On our website, you can custom build complete cable assemblies, control linkages, or individual components. CAD models, online pricing, intuitive search engines, and on-line inventory are all available at www.midwestcontrol.com. Best of all - cost out your project in multiple currencies, from multiple shipping points worldwide.








clevises catalog - midwest control · pdf filefamily photo series page material features...

Documents