cm compact medium
TRANSCRIPT
CM Compact Medium
Compact enclosures
CM Compact Medium MTS
CM
Compact System EnclosuresStrategie is to replace the AK enclosures ( end of 2006 )
Compact Medium CM
1-doorWidth Height Depth 600/800 800/1000/1200 300 / 400
2-doorWidth Height Depth 1000/1200 1000/1200/1400 300 / 400
CM Compact Medium MTS
CM Compact Medium MTS
CM Compact Medium MTS
CM BENEFITS
• Interior installation significantly more flexibility with TS8 accessories
• Cable entry more space and options
• Mounting plate easier to install
Benefits CM
CM Compact Medium MTS
CM
Infinite possibilities
Interior installation with system accessories• Compact enclosure on the outside, Top enclosure on the inside
(thanks to standard threaded bolts for interior installation via rails)• TS8 accessories can be used
(no double stockkeeping forcustomers who also use TSaccessories)
• Base/plinth of TS8 (all the well-known solutions such as cableclamping in the base/plinth arepossible)
CM Compact Medium MTS
CM
Infinite possibilities
Variants of cable entry• Buy only what’s necessary (choose gland plates from the TS
accesssory range according to your requirements)• Almost infinite combination possibilities• Width 600/800 mm one . . . . . 1000/1200 mm two cut-outs in the base
• Attention !CM gland plates, packs of 1, please note that at least two packs are required for enclosure width 1000 / 1200
CM Compact Medium MTS
CM
Infinite possibilities
Installation of mounting plate
• Insert at the bottom and snap on at the top
• Thus you can use both hands for screwfastening
• Width 1200 mm, can be additionally screw-fastened in the centre
CM Compact Medium MTS
CM
Bayable enclosure
• Door width 7 mm smaller than enclosure (AE 5 / AK 3 mm) – facilitates baying of CM enclosures
Door opening angle 100°when bayed
• Components installed in doors
- enclosure height 800 mm (two hinges) = 300 N
- higher than 800 mm (three hinges) = 400 N
CM Compact Medium MTS
CM Interior installation
Compatible with TS8
CM Compact Medium MTS
Rail systems e.g. partial mounting plate
Compatible with TS8
CM Interior installation
CM Compact Medium MTS
CM Interior installation
CM Compact Medium MTS
CM Cable entry
CM Compact Medium MTS
CM Cable entry
Suitable TS base/plinth
CM Compact Medium MTS
Assembly-friendly
installation of the
mounting plate
The mounting plate is
fastened with just one clip.
CM Installation of mounting plate
CM Compact Medium MTS
CM Accessories
Standard double-bit lock insert can be exchanged
Alternative
Folding lever handlefor- semi-cylinders- lock inserts- lock and push-button inserts
Lock system
CM Compact Medium MTS
Cable clamp rail
• C rail 30/15 to EN 60 715
• Length adjusted to fit CM and TS8 mounting plates
• Including mounting bracket with 3 fastening options, for optimum adjustment to cable entry opening
CM Accessories
CM Compact Medium MTS
CM Accessories
Further accessories in process !
• Door stay
CM Compact Medium MTS
CM Accessories
Further accessories in process !
• Door stay
• 19” frame
CM Compact Medium MTS
CM Accessories
Further accessories in process !
• Door stay
• 19” frame
• Internal door
CM Compact Medium MTS
CM Accessories
Further accessories in process !
• Door stay
• 19” frame
• Internal door
• Swing frame
• Rain canopy (no photo)