CME-12 Continuous excavator

The CME-12 features a front-mounted cutter, feed conveyor, underhung transfer chute and rear-mounted discharge conveyor. Originally designed for open pit coal mining, it has been recognized as an efficient and effective system suitable for other applications.

CME-12 Continuous excavator

Features• Variable discharge height from 1.5 m to 6.7 m• 140º discharge conveyor swing• Use for overburden, partings, coal, compact clay,

or any friable material• Shrouded cutter minimizes spillage• Horizontal rotary cutter cuts smooth floor for

crawler operation• Can work on vertical face or in thin horizontal

seam• Highly maneuverable with simple control system• Simultaneous excavation and loading eliminates

rehandling• Minimum dust generation• No clean-up or assist machinery required

Specifications

Nominal Capacity up to 900 tph

Cutter Width 3.66 m

Cutter Elev. Range 0.15 m to 4.30 m

Belt Width (transfer conveyor) 1.06 m

Belt Width (discharge conveyor) 1.06 m

No. of Tracks 2

Low Travel Speed up to 20.0 m/min.

High Travel Speed up to 75.0 m/min.

Diesel Power 354.2 kW

Conveyor Drives Hydraulic

Track Drives Hydraulic

Machine Weight 45,000 kgSpecial features and modifications available upon request

Copyright © 2015 FLSmidth A/S. ALL RIGHTS RESERVED. FLSmidth is a (registered) trademark of FLSmidth A/S. This brochure makes no offers, representations or warranties

(express or implied), and information and data contained in this brochure are for general reference only and may change at any time.

Rev

. 01 S

EP k

ls-u

s

FLSmidth’s RAHCO® CME-12 Continuous Excavator is capable of excavating at a capacity of 630 – 900 tph

FLSmidth USA, Inc.Spokane Operations605 E. Holland Ave, Suite 300Spokane, WA 99205USATel +1 509 467 0770Fax +1 509 466 0212mhna@flsmidth.com