cmp chain

Exceeds Industry Speci f icat ions

Engineered in Canada

Proof Tested

WWW.TITANMARINEPRODUCTS.COM


Trade Size in.

Wire Diameter Inside Dimensions Working Load Limit

mm in.Length Width

kg-forcepound-forcemm in. mm in.

1/4 7 0.276 21.3 0.84 10.41 0.41 1179 2600

5/16 8.4 0.329 26.2 1.03 12.95 0.51 1769 3900

3/8 10 0.394 31 1.22 15 0.59 2449 5400

7/16 11.8 0.464 35.6 1.40 16.5 0.65 3266 7200

1/2 13.0 0.519 40.34 1.59 19.3 0.76 4173 9200

Trade size in.

Half Drum Full Drum

Weight Length Part ID Weight Length Part IDkg lbs m ft. kg lbs m ft.

1/4 136 300 121.9 400 CHG43025ISOX400 272 600 243.8 800 CHG43025ISOX800

5/16 134 296 83.82 275 CHG4303125ISOX275 268 591 167.6 550 CHG4303125ISOX550

5/16 146 322 91.44 300 CHG4303125ISOX300 - - - - -

3/8 138 304 60.96 200 CHG430375ISOX200 276 608 121.9 400 CHG430375ISOX400

7/16 - - - - - 281 620 91.44 300 CHG4304375ISOX300

1/2 - - - - - 232 512 60.96 200 CHG4305ISOX200

ISO High Test Chain uses high tensile strength carbon steel that provides a greater strength-to-weight

ratio than proof coil chain. ISO short pitch link which makes it more flexible and ideally suited as a windlass

chain. Each link is proof tested and calibrated. Check manufacturer’s specification prior to purchase.

Finish: Hot Dip Galvanized

Packaging: Full and Half Drums

1

ISO High Test Windlass Chain - G43

G4Embossed/ft

Please see page 4 for packaging details.

Warning: Working Load Limit must not be exceeded. Not to be used for lifting or hoisting applications


Trade Sizemm

Wire Diameter Inside Dimensions Working Load LimitLength Width kg-force

pound-forcemm in. mm in. mm in.

6 6 .24 18.5 .73 7.2 .28 408 900

7 7 .28 22 .87 8.4 .33 635 1400

8 8 .31 24 .94 9.6 .38 816 1800

10 P28 10 .39 28 1.1 12 .47 1275 2810

10 P30 10 .39 30 1.2 12 .47 1275 2810

11 11 .43 31 1.22 13.2 .52 1610 3550

13 13 .51 36 1.4 15.6 .61 2041 4500

14 14 .55 41 1.6 16.8 .66 2551 5625

16 16 .63 45 1.77 19.2 .76 3186 7025

DIN766 chain uses a low carbon steel chain specifically designed for anchoring applications. Hot dip galvanized short link chain, calibrated to latest DIN766 standard. Each link is calibrated to ensure proper fit for most metric windlasses. Check manufacturer’s specification prior to purchase.


Packaging: Full Drums

Trade Sizemm

Part IDFull Drum

Kg Lbs Length / m Length / ft.

6 CHD7666X315 252 554 315 1033.46

7 CHD7667X225 250 549 225 738.2

8 CHD7668X175 249 547 175 574.15

10 P28 CHD76610P28X110 257 566 110 360.89

10 P30 CHD76610P30X110 260 573 110 360.89

11 CHD76611X88 249 548 88 288.71

13 CHD76613X62 247 544 62 203.41

14 CHD76614X57 250 549 57 187

16 CHD76616X44 252 554 44 144.36

DIN766 Windlass Chain - G30

2

G3Embossed/ft

Please see page 3 for packaging details.Warning: Working Load Limit must not be exceeded. Not to be used for lifting or hoisting applications


Full Drum

Half DrumPlastic Pail

DIA Heightin. cm in. cm

Full Drum 16½” 41.9 29” 73.7Half Drum 16½” 41.9 15” 38.1Plastic Pail 12” x 9½” 30.5 x 24.1 14½” 36.8

Trade Size in.


mm in. Length Width kg-forcepound-forcemm in. mm in.

1/4 7.1 0.281 22.1 0.87 10.92 0.43 590 1300

5/16 8.7 0.344 25.4 1.00 12.7 0.50 862 1900

3/8 10.3 0.406 27.69 1.09 15.75 0.62 1202 2650

BBB is a low carbon steel chain designed with short, compact calibrated links suitable for windlasses

and general anchoring. Check manufacturer’s specification prior to purchase.

Finish: Hot Dip Galvanized Packaging: Full Drums

BBB Windlass Chain - G30

Trade Size in.

Part IDFull Drum

Weight Lengthkg lbs m ft.

1/4 CHG30025BBBX800 261 576 243.84 800

5/16 CHG3003125BBBX550 274 605 167.64 550

3/8 CHG300375BBBX400 283 624 121.92 400

3

G3Embossed/ft

Packaging


WWW.TITANMARINEPRODUCTS.COM 4

Trade size mm

Plastic Pail Half Drum Full Drum

Weight LengthPart ID



Kg Lbs m ft. Kg Lbs m ft. Kg Lbs m ft.

6 48 106 60 196.9 CHGL6X60 126 276 157 515 CHGL6X157 252 554 315 1033.5 CHGL6X315

8 48 106 34 111.6 CHGL8X34 125 275 88 288.7 CHGL8X88 249 547 175 574.1 CHGL8X175

10 50 110 22 72.2 CHGL10X22 125 276 55 180.4 CHGL10X55 251 552 110 361 CHGL10X110

13 50 110 13 42.7 CHGL13X13 124 272 32 105 CHGL13X32 247 543 64 210 CHGL13X64

Grade L is a low carbon steel chain specifically manufactured to Australian Standard AS2321-2006.

Used for anchoring and mooring applications, Grade L calibrated short-link design ensures proper fit for

most Australian windlasses. Hot dip galvanized for the best protection against corrosion and abrasion.

Check manufacturer’s specification prior to purchase.


Packaging: Full & Half Drums, and Pails

Trade Size mm

Wire Diameter Inside Dimensions Working Load LimitLength Width kg-force

pound-forcemm in. mm in. mm in.

6 6 .24 18 .71 7.5 .3 454 1000

8 8 .31 24 .94 10 .39 816 1800

10 10 .39 30 1.2 12.5 .49 1270 2800

13 13 .51 39 1.5 16.3 .64 2041 4500

Grade L Windlass Chain - G30

G3 Embossed/ft



WWW.TITANMARINEPRODUCTS.COM5

ISO Proof Coil Chain is low carbon steel general purpose/anchor chain with an ISO short pitch link. It

is used in applications where high tensile strength is not required.


Packaging: Full Drums, Half Drums, and Pails

Trade Size in.

Wire Diameter Inside DimensionsWorking Load

Limit

mm in.Length Width

kg-forcepound-forcemm in. mm in.

3/16 5.5 0.218 24.64 0.97 10.16 0.4 363 800

1/4 7 0.276 25.4 1.00 12.7 0.5 590 1300

5/16 8.4 0.329 28.45 1.12 12.7 0.5 862 1900

3/8 10 0.394 31.24 1.23 15.75 0.62 1202 2650

1/2 13 0.519 38.1 1.50 20.57 0.81 2041 4500

5/8 16 0.630 48.26 1.90 25.65 1.01 3130 6900

3/4 20 0.781 55.88 2.20 27.69 1.09 4808 10600

Trade size in.

Plastic Pail Half Drum Full Drum




kg lbs m ft. kg lbs m ft. kg lbs m ft.

3/16 47 102 76.2 250CHG3001875I-

SOX250148 327 243.84 800

CHG3001875I-SOX800

297 654 487.68 1600CHG3001875I-

SOX1600

1/4 46 101 42.98 141 CHG30025ISOX141 130 287 121.92 400 CHG30025ISOX400 260 574 243.84 800 CHG30025ISOX800

5/16 43 95 28.04 92CHG3003125I-

SOX92129 284 83.82 275

CHG3003125I-SOX275

258 568 167.64 550 CHG3003125ISOX550



5/8 - - - - - - - - - - 264 582 45.72 150 CHG300625ISOX150

3/4 - - - - - - - - - - 261 576 30.48 100 CHG30075ISOX100

ISO Proof Coil Chain - G30General Purpose/Anchor Chain

G3Embossed/ft

Please see page 3 for packaging details.Warning: Working Load Limit must not be exceeded. Not to be used for lifting or hoisting applications


Trade Size in.


mm in. Length Width kg-forcepound-forcemm in. mm in.

3/8 9.8 0.386 41.9 1.65 16.5 0.65 1837 4050

1/2 13.0 0.512 50 1.97 22.1 0.87 3130 6900

5/8 16.7 0.656 64.26 2.53 23.37 0.92 4423 9750

3/4 19.8 0.781 75.95 2.99 26.42 1.04 6804 15000

High tensile strength mooring chain with long links that allows the use of shackles.


Packaging: Full Drums

Mooring Chain - Long Link - G43

Trade Size in.

Part IDFull Drum


3/8 CHG430375MCX200 123 271 60.96 200

1/2 CHG4305MCX200 214 472 60.96 200

5/8 CHG430625MCX150 260 573 45.72 150

3/4 CHG43075MCX100 239 527 30.48 100

G4Embossed/ft




Stainless Steel

Calibrated for Windlasses

Trade Size mm.


mm in. Length Width kn-forcepound-forcemm in. mm in.

6 6 0.019 18.5 0.06 20.4 0.066 4.95 1084

8 8 0.026 24 0.08 27.2 0.089 8 1800

Trade Size mm.

Part IDHalf Drum


6 CHD766SS6X157 123 271 157 515

8 CHD766SS8X88 123 267 88 289



High quality, outstanding looking, 316 stainless steel chain is the ultimate in corrosion resistance.

Packaging: Half Drums


ANCHOR RODEDepending on the size and type of your boat, your choices are an all-rope anchor rode, combination rope/chain, or all chain.

Rope should be nylon, either three-strand or braided. Nylon rope is elastic, making it a great shock absorber for sudden loads caused by wind and waves. Three-strand line should be medium lay, which has more twists per foot than soft lay. This is particularly important for use with a windlass, as the soft lay strands can untwist and separate, fouling the equipment. Three-strand rope can become awkward to handle, especially when hardened by salt saturation. An occasional bath in fabric softener will help to keep it supple.

Chain, used alone or in combination with rope, offers great benefits: it decreases the angle of pull on the anchor allowing it to set and hold more effectively, it’s unaffected by chafe from rocks or sharp surfaces on the bottom, its weight forms a curve that absorbs shock loads in heavy weather. Hi-Test chain is made from higher carbon steel that has been surface-hardened. It has a higher strength-to-weight ratio than proof coil and is favoured by the weight-conscious, as it can reduce the weight in the bow by up to 30% without sacrific-ing strength.

What is the difference between twisted and braided anchor rope?When buying anchor rope, you are likely to encounter two types of nylon rope: twisted and braided. All nylon rope makes an excellent choice for anchor rope and the difference between braided rope and twisted rope really comes down to stiffness and whether you need to splice the rope or not.

More stiff and less flexible.Fairly easy to splice.Generally less expensive.Has more stretch than braided.Has a tendency to kink or heckle.

Less stiff and more flexible.Difficult to splice.Frequently stronger than twisted rope.Looks better.Easier on the hands.Less stretch than twisted rope.

Suggested Minimum Working Rode Sizes* (For winds up to 30 knots.)Boat Size Beam (Sail ) Beam (Power) Rope (Nylon) Chain (Hi-Test)

10~15' 5~7' 5~7' 150’-1/2” 1/4”

20~25' 8' 9' 150’-1/2” 1/4”

26~30' 9' 10' 200’-1/2” 1/4”

31~35' 10' 11' 200’-9/16” 5/16”

36~40' 12' 13' 250’-9/16” 5/16”

41~45' 13' 14' 250’-5/8” 3/8”

46~50' 14' 16' 300’-5/8” 3/8”

51~60' 16' 19' 350’-3/4” 1/2”Source: West Marine (www.westmarine.com ), Anchorlift (www.anchorlift.com ), ABYC(America Boat & Yacht Council, www.abycinc.org)


Double Braided Anchor Rode(With G4 HT Chain)

PIDRope Chain

DIA Length Wire DIA Link Dimensions L x W

AR14HT15012DBN 1/2"/12mm 150'/45m 1/4"/6mm 0.84"/21.3mm x 0.41"/10.41mm












AR516HT15058DBN 5/8"/16mm 150'/45m 3/8"/10mm 1.22"/31mm x 0.59"/15mm





Total Breaking Strength Safe Working Load

Length Length LB KG KN LB KG KN

15'/4.5m 165'/50m 7800 3470 35 1560 694 7

15'/4.5m 215'/66m 7800 3470 35 1560 694 7

15'/4.5m 265'/80m 7800 3470 35 1560 694 7

20'/6.0m 320'/98m 7800 3470 35 1560 694 7

15'/4.5m 165'/50m 9900 4404 44 1980 881 9

15'/4.5m 215'/66m 9900 4404 44 1980 881 9

15'/4.5m 265'/80m 9900 4404 44 1980 881 9

20'/6.0m 320'/98m 9900 4404 44 1980 881 9

15'/4.5m 165'/50m 12200 5420 54 2440 1085 11

15'/4.5m 215'/66m 12200 5420 54 2440 1085 11

20'/6.0m 265'/80m 12200 5420 54 2440 1085 11

20'/6.0m 320'/98m 12200 5420 54 2440 1085 11

15'/4.5m 165'/50m 12200 5420 54 2440 1085 11

15'/4.5m 215'/66m 12200 5420 54 2440 1085 11

20'/6.0m 265'/80m 12200 5420 54 2440 1085 11

20'/6.0m 320'/98m 12200 5420 54 2440 1085 11


Three Strand Anchor Rode(With G4 HT Chain)

PIDRope Chain

DIA Length Wire DIA Link Dimensions L x W Length

AR14HT15012 1/2"/12mm 150'/45m 1/4"/6mm 0.84"/21.3mm x 0.41"/10.41mm 15'/4.5m










PIDTotal Breaking Strength Safe Working Load

Length LB KG KN LB KG KN

AR14HT15012 165'/50m 5670 2522 25 1134 504 5

AR14HT20012 215'/66m 5670 2522 25 1134 504 5

AR14HT25012 265'/80m 5670 2522 25 1134 504 5

AR14HT30012 320'/98m 5670 2522 25 1134 504 5

AR516HT150916 165'/50m 7200 3203 32 1440 641 6

AR516HT185916 215'/66m 7200 3203 32 1440 641 6

AR516HT200916 265'/80m 7200 3203 32 1440 641 6

AR516HT300916 320'/98m 7200 3203 32 1440 641 6

AR516HT20058 215'/66m 8910 3963 40 1782 793 8

AR516HT30058 320'/98m 8910 3963 40 1782 793 8


PIDTotal Breaking Strength Safe Working Load

Length LB KG KN LB KG KN

AR14HT15012S8 165’/50m 5670 2522 25 1134 504 5

AR14HT20012S8 215’/66m 5670 2522 25 1134 504 5

AR14HT25012S8 265’/80m 5670 2522 25 1134 504 5

AR14HT30012S8 320’/98m 5670 2522 25 1134 504 5

Shared Features of all types of Nylon Rope

•Nylon stretches. This allows the line to absorb a portion of the load placed on it from wind and wave action.•Nylon absorbs much more of the loading energy when anchored compared to natural fibres like Manila and Cotton. This allows the anchor to remain set rather than pulled out. •The fact nylon stretches creates heat within the fibres, eventually breaking down the rope and leading to failure.

Eight Strand Plaited Anchor Rode (With G4 HT Chain)

PIDRope Chain

DIA Length Wire DIA Link Dimensions L x W Length

AR14HT15012S8 1/2”/12mm 150’/45m 1/4”/6mm 0.84”/21.3mm x 0.41”/10.41mm 15’/4.5m





Titan Nylon Dock lines have a water-resistant coating to prevent strength loss that occurs in wet conditions.

Higher twisting of yarns and strands produces a denser, rounder rope with higher abrasion resistance that is less likely to snag.

Controlled manufacturing ensures a line that is well balanced, torque free and won’t unlay under heavy loading.

13

*add at the end of PID when order

Dock Line

Three Strand Dock Lines• Maximize shock absorption• Superior wet and dry abrasion resistance• A good choice for permanent dock lines

Double Braided Dock Lines• Softer and easier to handle,cleat and coil• Stronger than comparable three strand dock lines• Best choice for dock lines to carry onboard port to port

ThreeStrand

Part ID Description

Specification

SizeColor*

Average Strength

DIA Length KG LB

DL3810S3 3/8in X 10ft 3 STRD Nylon DockLine

3/8” (10mm)

10' (3m) WHT

1650 3600

DL3815S3 3/8in X 15ft 3 STRD Nylon DockLine 15' (5m) WHT/BLK



DL3830S3 3/8in X 30ft 3 STRD Nylon DockLine 30' (9m) WHT


1/2” (13mm)

15' (5m) WHT/BLK

2900 6300




DL1235S3 1/2in X 35ft 3 STRD Nylon DockLine 35' (11m) WHT


5/8” (16mm)

20' (6m)

WHT/BLK4500 10000

DL5825S3 5/8in X 25ft 3 STRD Nylon DockLine 25' (8m)




3/4” (19mm)

25' (8m) WHT

6150 13500DL3430S3 3/4in X 30ft 3 STRD Nylon DockLine 30' (9m) WHT/BLK


DoubleBraided

DL3815DB 3/8in X 15ft DBL BRD DockLine

3/8” (10mm)

15' (5m) WHT/GOLDBLK REDBLU NAV

2100 4600DL3820DB 3/8in X 20ft DBL BRD DockLine 20' (6m)

DL3825DB 3/8in X 25ft DBL BRD DockLine 25' (8m)

DL1215DB 1/2in X 15ft Double Braid DockLine

1/2” (13mm)

15' (5m) BLK BLUNAV RED

TEALWHT/GOLD

3900 8600DL1220DB 1/2in X 20ft Double Braid DockLine 20' (6m)

DL1225DB 1/2in X 25ft Double Braid DockLine 25' (8m)

DL1230DB 1/2in X 30ft Double Braid DockLine 30' (9m)

ThreeStrand

FL5166S3PP 5/16inX6ft 3STRD PP FenderLine 2PK 5/16" (8mm) 6' (2m) WHT

Contact us for detail information

FL386S3PP 3/8inX6ft 3STRD PP FenderLine 2PK 3/8" (10mm) 6' (2m) WHT

DoubleBraided

FL5166DBPP 5/16inX6ft DBL BRAD PP FND-Line 5/16" (8mm) 6' (2m) Assorted Colors

FL386DBPP 3/8inX6ft DBL BRAD PP FND-Line 3/8" (10mm) 6' (2m) Assorted Colors


42 1/8”107 cm

15½”39.4 cm

7 1/8”18.1 cm

24”61 cm

13 3/8”34 cm

Shelves are custom fitted to lock pails into place to ensure safety and stability.

Chain Merchandising Solutions

6-Pail Display PID: CHDISP6

Our space-saving, chain merchandiser is built tough to hold over 660 lbs (300 kg) of chain within its small footprint. Each shelf is specially designed and custom fitted to lock pails into place to ensure stability and safety. Includes heavy-duty casters.

What size dock line?The length, size, weight and type of boat, and just how exposed the docking location is, all need to be considered in choosing a dock line size. The following is a general guide, but windy or higher wave locations may require more and heavier lines.

Boat Length: up to 27’ 28’-31’ 32’-36’ 37’-45’ 46’-54’ 55’-63’ 64’-72’

8.2m 8.5-9.4m 9.7-11m 11.3-13.7m 14-16.5m 16.8-19.2m 19.5-21.9m

Dock lineDIA:

3/8” 7/16” 1/2” 5/8” 3/4” 7/8” 1”

10mm 11mm 13mm 16mm 19mm 22mm 25mm

WWW.TITANMARINEPRODUCTS.COMWWW.TITANMARINEPRODUCTS.COM

Tel: 1-604-940-2010 Fax:1-604-952-2650

Email: [email protected]

cmp chain

Documents

short link chain

7025din766 chain

proof coil chain

drumweight length

load limitmm

id weight length

drumkg lbs length

low carbon steel chain