co60pm_manual.pdf

7/27/2019 CO60PM_manual.pdf

1/18

Portable Evaporative Air Cooler

OWNERS MANUALRead and save these instructions before use

Ideal for Indoor & Outdoor Use

0 32

1ON

COOL

SPEED

SWING

ON

OFF

OFF

Model: CO60PM

Power rating: 220 WattsVoltage rating: 220 Volt AC, 50Hz

Made in P.R.C.


2/18

QUICK START GUIDE

Fill with water and plug into standardpower outlet.

Place near open door or window.(When used in Indoors)

Note : Please make sure that the power outlet isset to correct settings as per product specifications.

Note : Evaporative Air Coolers work on evaporative

cooling mechanism which requires cross ventillation.

Turn ON and enjoy the cooling breeze.

Note: Start with LOW speed and gradually increaseto higher speed for optimum cooling performance.


3/18

SECTION PAGE

1. THANK YOU .........................................................................................................2. USER TIPS ...........................................................................................................3. SAFETY RULES ...................................................................................................4. PARTS DESCRIPTION .........................................................................................5. USE & OPERATION .............................................................................................

Control Panel ....................................................................................................

Function Buttons ...............................................................................................

6. CLEANING & MAINTENANCE .............................................................................7. TROUBLESHOOTING GUIDE .............................................................................8. TECHNICAL SPECIFICATIONS ...........................................................................9. ELECTRICAL WIRING DIAGRAM ........................................................................

235788

8Fill Water .......................................................................................................... 10

11131415

INDEX

1

Read all instructions carefully before setting up and operating the unit, and please keep

this instruction manual for future reference. This manual is designed to provide you with

important information needed to setup, operate, maintain, and troubleshoot your cooler.Failure to follow these instructions may damage and/or impair its operation and void the

warranty.


4/18

THANK YOU!

THANK YOU!

2

Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For optimumcooling performance from your unit, fill the water tank with water & ice (if available) to increase its

cooling power.

COOLER LOCATION (IMPORTANT TO READ)(When used in Indoors)

Place the cooler in front of an open door or window. Ensure thatthere is adequate cross -ventillation in the room by leaving adoor or window open opposite from the cooler.

Following these rules will ensure your cooler will work aseffectively as possible.


5/18

COOL ~ EFFICIENT ~ NATURAL

3

Pump

Water

Honeycomb Cooling Media

Evaporative Air Cooling Mechanism

Warmand

dryair

Coldand

humidair

Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. Thisbreeze drops the temperature and has a relaxing cooling effect.

The evaporative air cooler cools the air by means of the evaporation of water. When waterevaporates into the air, the result is a mixture of air and water molecules. This chemical change

requires heat which is taken from the water molecules, resulting in cooler air propelled from theunit.

USER TIPS


6/18

NOTE

4

USER TIPS

OFF

COOL

ONOF

F

SWING

ON0 321

OFF

COOL

ONOF

F

SWING

ON0

321

When the product is used for the first time the Honeycombcooling media will have an odour which will dissipate in a weekor so of initial use.

The recommended maximum relative humidity level is 60%orless, which allows a noticeable temperature decrease.

Thetemperature decrease will be greater in drier climatesbecausehigher evaporation occurs when the humidity is low.

The evaporative air cooler should not be used inenclosedspaces. It must be kept level and there must be waterin thewater tank. The room should have doors and windows

openedto allow free air flow. The evaporative air cooler works

bestwhen placed near an open window, so that outside air isdrawninto the evaporative air cooler, the air circulates in the

room,then exits via the door. The maximum cooling effect isfeltwhen a person is in the flow of air coming out of theevaporativeair cooler.

The evaporative air cooler can also be used to humidify dry

airduring cool weather. To be used for humidificationthewindows and doors should be closed to allow thehumidifiedair to accumulate. The evaporative air cooler is not

an airconditioner as it does not use a compressor or refrigerantgas.It should not be expected to cool as efficiently as arefrigeratedair conditioner.


7/18

READ AND SAVE THESE INSTRUCTIONS:

SAFETY RULES

220 Volt AC 50Hz

SHOCK HAZARD

WATER LEVEL INDICATOR

5

MAX

MIN

I

3

When using electrical appliances, basic safety precautions should always be followed:

Your cooler runs on 220 Volts, 50 Hz current. Checkthehousehold voltage to ensure it matches the appliance's

ratespecification.Before operating the product remove it from its packagingandcheck it is in good condition.

DO NOT operate any product with a damaged cord or plug.Werecommend not using an extension cord with thisappliance.DO NOT run power cord under carpeting, or cover it withrugs

or runners. Keep the cord away from areas where itmay betripped over.Always unplug the product before refilling the water tank.

Always unplug the appliance from the power source

beforecleaning, servicing or relocating the unit."Remove the power cord from the electrical receptacle

bygrasping and pulling on the power cord plug-end only,neverpull the cord.DO NOT use the product in areas where gasoline, paint

orother flammable goods and objects are stored.When using the ''COOL'' setting, please check the water

tankto ensure it is full. Operation of this unit on the ''COOL''settingwith an empty tank may result in damage to the waterpump.


8/18

I

Water / Ice compartment

SAFETY RULES

FLOOR LEVEL

6

DO NOT attempt to repair or adjust any electrical ormechanicalfunctions of the cooler, as this may void the

warranty.DO NOT cover the air inlet or outlet on the appliance as thismay cause motor damage.

DO NOT insert or allow objects to enter any ventilationorexhaust opening as this may damage the product andcouldcause an electrical shock or fire.

DO NOT operate with the Honeycomb media removed as

thiswill overload and damage the motor.DO NOT leave the appliance operating unattended for

anyextended period of time.DO NOT let children play with this appliance, packagingorplastic bags.

If the unit is damaged or it malfunctions, do not continuetooperate it. Refer to the troubleshooting section and /or

pleaseseek professional advice.Place the unit on a level floor.This product is not intended for use in wet or damp locations.

Never locate the product where it may fall into a bathtuborother water container. DO NOT use in bathrooms.When the unit is not in use always store in a dry area.

This appliance is not intended for use by persons

(includingchildren or elderly) with reduced physical, sensoryor mentalcapabilities, or lack of experience and knowledge,

unless theyhave been given supervision or instructionconcerning use ofthe appliance by a person responsible fortheir safety.

Always grip the side handles to move the unit.


9/18

7

PARTS DESCRIPTION

OFF

COOL

ON OFF

SWING

ON0 3 2

1

1

2

9

8

3

10

11

14

12

13 4

5

6

7

1 Water / Ice Inlet2 Handle3 Left Honeycomb Panel4 Lever for Horizontal Louvers

5 Water Tank6 Castors Wheels7 Horizontal Louvers

8 Water Level Indicator9 Control Panel10 Right Honeycomb Panel11 Continuous Water Inlet

12 Water Drain Plug13 Backside Honeycomb Panel14 Power Cord & Plug


10/18

CONTROL PANEL

COOL SPEED SWING

OFF ON OFF ON0 3

2

1

NOTE:

Speed control may be marked as High / Med / Low in certain units.

USE & OPERATION

8


11/18

CONTROL KNOBS

SPEED / ON - OFF

COOL

OFF ON

SWING

OFF ON

SPEED

0 3

2

1

Connect to the power supply and turn the Speed knob. The fan

will start. Change the speed from 1 for Low to 2 for Medium to3 High. To switch OFF the unit turn the Speed know to "0".

COOL

To begin cooling the desired area press the ''COOL'' button.The indicator light will come on and the water pump willoperate. You can feel the cooler air after the Honeycomb

media is completely wet.

SWINGPress the ''SWING'' button. The indicator light will come on andthe louvers will begin to move from right to left automatically.Manually adjust the horizontal louvers to change vertical

airflow.

HORIZONTAL LOUVERSManually adjust the horizontal louvers to change vertical

airflow.

9

USE & OPERATION


12/18

Hose Connector

USE & OPERATION

INSTALLING HOSE ADAPTER

Manual operation

10

NOTE : Continuous water supply connection is optional, and maynot be provided with all models.Connect the garden hose Connector and turn on the water.

Verify water tight connections by visually examining boththefloat/hose connections.

Water can be filled into the air cooler by:

Continuous water supplyWith the help of garden hose connected to the hose connector onthe unit, water will refill inside the tank on turning on the water tap.

Open the Water fill door located at the top of the unit (when facing front) & fill water up to themaximum tank level. Water level display is located on the front of the unit. Refill the water tank

when water level is low. Do not fill water above the Max water level mark. Check water level in thetank before running the ''COOL'' function. Please be sure water in the tank is alwaysabove minimum water level mark. Running the unit with inadequate water may cause pump

failure. If ice is available you may add ice in the top compartment to enhance the coolingperformance.

As soon as the water inside the tank reaches the maximum level, the float valve inside the water tankwill stop the in-flow of in the water tank.Due to the float valve and continuous supply of water. The water tank in this model will never be empty

and will refill on its own as soon as the float wall goes below the desired level of maximum water insidethe tank.


13/18

WARNING

CLEANING & DRAINING THE WATER TANK

11

Turn the power "off" and disconnect the unit from power supply.Move the unit to a location where it can be drained and remove the

drainagetube/cap (see parts description on page 7).Once the tank is empty, refill with clean water and drain it again. This should berepeated weekly to maintain the integrity of the unit and to remove particles

filtered from the air.

Install the clean water tank to its original position and fill clean water inside thetank.

CLEANING & MAINTENANCE

Before cleaning the unit, switch it to the ''off'' position and remove the plug from

the power socket.To clean the outside, use a damp cloth to remove dirt and dust.Never use corrosive elements or any chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.


14/18

CLEANING & MAINTENANCE

MAINTAINING AND CHANGING THE HONEYCOMB

12

This unit is supplied with three (3) Honeycomb Cooling Media's located on the back &

two sides. The removal procedure for all the media's is same as explained above.

NOTE:

Hand ScrewHand Screw

Honeycomb Holder

Side Panel

Fig.1

The appliance is supplied with Honeycomb cooling media.

The cleaning frequency for the Honeycomb media depends on local air and waterconditions.In areas where the mineral content of water is high, mineral depositsmay build up on thehoneycomb cooling media and restrict air flow. Draining thewater reservoir and refilling with

fresh water at least once a week will help reduce mineral deposits. If mineral deposits remainon the Honeycomb media, the media should be removed and washed under fresh water. Themedia should be cleaned every two months or sooner, depending on your needs.

Do not run the unit in COOL mode with stale water in the tank. It is recommendedto empty thetank and refill it with fresh water if the water has been standing in the tank for an extendedperiod of time.

For best results, allow the honeycomb cooling media to dry after each use by turning off thecool function 15 minutes before turning the unit off.To change the Honeycomb, remove the hand screws which hold the side panel(Refer Fig.1).

Remove the Honeycomb holder and replace the Honeycomb.Refix theHoneycomb holder andscrew back the panel to the unit.


15/18

TROUBLESHOOTING GUIDE

No discharge of air Cord is not plugged in. Make sure power cord is pluggedin and the supply switch in ON.

Power is not on.

Not Cooling / Unit is

making noise

Pump is not turned ON. Turn on COOL function fromcontrol panel.

Low or no water in tank,

when COOL is selected.

Refill water tank.

Odour omission New Unit.

Old Unit.

Damaged Pump orCalciumdeposits on blower.

Contact service centre.

PROBLEM POSSIBLE CAUSE SOLUTION

Try to turn the unit ON bychanging the operation

settings of manual knobs onthe control panel.

When the unit is used for

thefirst time, the Honeycombcooling media will have anodour, which will dissipate

within a week of initial use.

There may be an algaeissue,Replace the honeycombcooling media. Contact

service centre.

13


16/18

MODEL NO. CO60PM

220V50Hz

200 Watts60 Litre

Honeycomb700 (L) x 466 (W) x 1017 (H)

20 Kg

VoltageFrequencyWattageWater Tank CapacityCooling MediaProduct DimensionNet Weight

TECHNICAL SPECIFICATIONS

14


17/18

ELECTRICAL WIRING DIAGRAM

15


18/18

2012 AirTek International Corporation LimitedThe Honeywell Trademark is used under license fromHoneywell International Inc.Honeywell International Inc. makes no representation orwarranties with respect to this product.Manufactured by AirTek International Corporation Limited.

:

co60pm_manual.pdf

Documents