coates hire engineering and product solutions

2 // Engineering and Product Solutions Contact us: 13 15 52 | [email protected]

At Coates Hire, we offer not only the highest quality equipment, we equip our customers with the best expertise in the industry. We can provide expert advice on evaluating the risks associated with equipment supply, performance and operation. Our Engineering Services Team offers comprehensive technical support and we can assist in the concept and design of all engineering solutions. All of which ensures that your site is always performing to its full potential.

Our unique ability to provide total equipment solutions helps you drive both time and costefficiencies. We have the expertise to ensure you have everything you need, anytime you need it. So no matter how big or small your project is, you can count on Coates Hire to help make it happen.

• Commitment to Safety: We are passionately commited to safety, helping deliver your project on time whilst ensuring you’re meeting duty of care obligations.

• 130 Years’ Experience: We have a track record that spans every market sector, helping to deliver successful projects across a wide range of industries

• Project Support: Over 600 branch managers, field sales and product specialists are committed to providing complete solutions to your specific project needs.

• Industry Leading Customer Service: At Coates Hire we take customer service seriously and ensure we are continually improving your experience.

• Engineering and Technical: Our dedicated team of experts can provide technical solution, design, certification and installation services for temporary works requirements.

• R&D Capabilities: Our research, development & innovation arm constantly strives to find new and better solutions, systems and equipment for our customers.

OUR EXPERTISE:

// 3 Engineering and Product Solutions

Technical and Engineering Solutions

At Coates Hire, we have been providing a wide range of specialist equipment and services for over 130 years. We pride ourselves in providing much more than just our product range. Our specialist solutionsteam has a wealth of experience in the provision of:

• Traditional trench shoring• Specialist excavation temporary works• Structural propping solutions• Synchronised jacking• Traffic management• Ground water management• Water treatment solutions

Our aim is to meet our customers’ productivity, safety, environmental and cost managementexpectations.

Our equipment offering is supported by a highly trained and motivated team of qualified engineers,Regional Sales Engineers and Product Specialists. These experts are assisted by knowledgeable hire teams based at specialist supply depots throughout Australia.

Coates Hire has a solid reputation for quality and service, whilst ensuring we meet all of our legislative requirements. No job is too large or too small, we have the equipment and expertise to add value to any construction project and we look forward to servicing your needs.


Safety

• Safety is embodied in everything we do and we work closely with our customers to create the safest working environments

• All products and engineering work we do is compliant with relevant Australian Standards

• ‘Safety in Design’ is incorporated into all of our engineering solutions

• Our engineers are all members of Engineers Australia with qualification to NER RPEQ status

• Our safety related products, such as the new Shoring, Access and Egress solutions along with Handrails and Trench Davit systems are NATA accredited and compliant to Australian Standards

Engineering & Technical Services

At Coates Hire, we aim to supply cost effective custom designed solutions for all our specialist product areas and in particular projects where temporary works play a key part in the construction process.To achieve this we have set up a team of fully qualified structural, civil, mechanical and environmentalengineers with many years of industry experience to work with our clients at all stages in the projectprocess from design right through to commissioning and handover.

This enables us to support our clients, along with their consultants and contractors, delivering the best and most cost effective engineering solution for their project.

We can now support you at the very early planning stage, manage the installation process via a range of turnkey solutions and also provide engineering sign off for designs and installed schemes when needed.

We provide full project support, which includes a team of qualified experts offering support and advice ranging from simple enquiries to highly complex project challenges.


Key capabilities of the design service

ü Full Temporary Works support packages, including installation services for shoring, propping, traffic and water management solutions

ü Well presented, design solutions using the latest CAD software

ü Method statements, both generic and scheme specific, pictorial or written word

ü Tender support packages for estimators and planning functions including schemes and budget costing

ü Support for site teams to develop best solutions and cost effective design options to keep within timescales and budget expectations

ü Risk Assessments both generic and scheme specific

ü Safety in design

ü Competitive pricing solutions

ü Develop safe and sustainable solutions

ü Training and coaching of site staff in all products via a range of tool box talks and ongoing support to help keep projects on track and provide safest possibleworking environment

ü Advice and support on installation and extraction techniques

ü Engineering design sign off and installed equipment sign off available both internal and third party

PARTS LISTPART NUMBERQTYITEM

STANDARD TILT PROP167SYSTEM-30-BEAM-2000368SYSTEM-30-BEAM-100049SYS30-JACK ASSEMBLY810SYSTEM 30-SH RACK BRACKET ASSY411SYSTEM-30-BEAM-05001212SYSTEM-30-END CONNECTOR12136 m x 2.4 m Steel Road Plate 32 mm thick214Hard Wood Full Sleeper- 200 x 100 , 2400 long2016

1

1

2

2

3

3

4

4

A A

B B

C C

D D

RMS, Southern Road Service Concept

S.Raina

22/03/2013

This design is the property of COATES HIRE Ltd. A.B.N 99 074 126 971

STANDARD DISCLAIMERTHE ADVICE PROVIDED IN THIS DOCUMENT (TOGETHER WITH ANY DRAWINGS, IF APPLICABLE) HAS BEEN PREPARED AND DESIGNED, BASEDSOLELY UPON THE INFORMATION, WEIGHT, LOAD BEARING DATA, SURFACE CONDITIONS AND THE REQUIRED USE OR PURPOSE PROVIDEDBY THE CUSTOMER. COATES HIRE HAS NOT, NOR WAS IT REQUIRED BY THE CUSTOMER, TO VERIFY THE ACCURACY OF ANY INFORMATIONOR DATA PROVIDED. IT IS STRONGLY RECOMMENDED THAT THE CUSTOMER OBTAIN INDEPENDANT ADVICE AND A REVIEW OF THE MATERIAL AND INFORMATIONCONTAINED IN THIS DOCUMENT. COATES HIRE DOES NOT WARRANT THE ADVICE AND MATERIAL CONTAINED IN THE DOCUMENT AS SUITABLE FOR ANY OTHER PURPOSE OREVENT OTHER THAN THOSE PURPOSES OR EVENTS PROVIDED BY THE CUSTOMER. COATES HIRE DENIES ANY LIABILITY IN THE CASE OFDAMAGE TO PROPERTY OR INJURY TO PEOPLE CAUSED THROUGH THE INCORRECT OR IMPROPER USE OF THE ADVICE OR MATERIALCONTAINED IN THIS DOCUMENT OR IF THE ADVICE WAS USED FOR A PURPOSE OTHER THAN THAT SPECIFIED BY THE CUSTOMER TO COATESHIRE. SUBJECT TO ANY OTHER TERMS OR CONDITIONS CONTAINED WITH THE SUPPLY OF THIS SERVICE, LIABILITY OF COATES HIRE ARISING FROMTHIS ADVICE (INCLUDING NEGLIGENCE) IS LIMITED TO FIVE TIMES THE FEES PAID FOR THE PROVISION OF THIS SERVICE.

Drawn By

Drawing Number

Date

BU

Thornes Bridge SupportConcept ( four required)

CLIENT

NOTES-All connections for System 30 must be fastened using 4 of M18 nuts, bolts & washers positioned in the corner holes.-For connecting Tilt Props, use 1 of M18 Nut & Bolt on each end-Please note that this drawing is issued for confirming dimensions only. The foot pint and the height of the tower will be changed according to the dimensions required. Parts list shows all components required to construct 1 complete tower as shown. Four of these will be required, two on eac side.- The Qty required will change if the dimensions are changed dimensions.

PLAN VIEW

FRONT ELEVATION SIDE ELEVATION

ISOMETRIC

5000

4690

6000

2400

400-

610

7000

400-

610

10032

10

9

8

12

7

11

14

16

1.0m EXT. 5.0m EXTENSION 3.0m EXTENSION

1.0m EXT.

5.0m EXTENSION

3.0m EXTENSION

1.0m

EXT

.

5.0m

EXT

ENSI

ON

3.0m

EXT

ENSI

ON

HYDR

AULI

C RA

M

1.5m

EXT

.

5.0m

EXT

ENSI

ON

HYDRAULIC RAM 1.5m EXT.5.0m EXTENSION

HYDRAULIC RAM

1.5m EXT.

5.0m EXTENSION

ALL DIMENSIONS ARE IN mmDISCLAIMER1. This design is provided to You subject to the Coates Hire Terms of Hire andSpecial Conditions as amended from time to time.2. Any designs, calculations, drawings, specifications and sketches produced byUs for You are prepared solely on the information supplied by You and We arenot responsible for the accuracy of the details contained therein.3. All designs, calculations, drawings, specifications and sketches produced byUs are indicative only and are prepared for the sole purpose of assisting You inassessing and comparing quotations.4. You acknowledge and agree that We are not liable for any loss or damagearising from the use of such designs, calculations, drawings, specifications andsketches. You indemnify Us against all liability, claims, damage, loss, costs andexpenses (including, without limitation, legal fees, costs and disbursements ona full indemnity basis, whether incurred or awarded against Us and anyenvironmental loss, cost, damage or expense) in respect of:(a) personal injury;(b) damage to tangible property; or(c) any claim of direct or indirect loss or damage by a third party, in relation toYour use or reliance on the designs, calculations, drawings, specifications andsketches produced by Us.5. You warrant that You will seek Your own independent advice from a qualifiedprofessional in relation to the proper installation and use of the ProppingEquipment for Your required purpose. Prior to the hire, You must advise us ofyour Propping Equipment requirements upon receipt of advice from thequalified professional, including any proposed alterations and adjustments thequalified professional requires to any designs, calculations, drawings,specifications and sketches provided by Us.6. You acknowledge that We have made the operating and safety instructionsfor the Propping Equipment You have hired available to You to read.7. Subject to clause 16 of the Terms of Hire and the general waiver of liabilitycontained therein, We are additionally excluded from all liability related to thehire and use of the Propping Equipment by You, including, but not limited to,liability arising from:(a) damage to all adjacent or surrounding structures and(b) damage to utilities or services.NOTES

1. All bracing components to be restrained withhanging chains connected at the positionsindicated in this drawing.

2. Frame 1 & 2 to be restrained directly to the top ofthe sheet pile.

3. Frame 3 to be restrained directly to the undersideof Frame 2.

4. Suitable edge protection to be supplied by thecontractor.

5. Suitable means of access/ egress to be supplied bythe contractor.

6. Appropriate site specific risk assessments shouldbe performed by the contractor prior tocommencement of any work.

7. This design has NOT been certified

HANGING CHAINS(To be attached at these

locations in accordance withthe installation instructions)

HANGING CHAINS 18 No.

Mega Brace Hydraulic Ram

Mega Brace 3.0m Beam Extension






1,120kg

410kg

585kg

760kg

1,120kg

1,475kg

2,008kg

Schedule of Weights: MEGA BRACE

Item Description Item Weight

Mega Shear Clamp 120kg

194kg

Schedule of Weights:TRENCH SHEETING

Item Description Item Weight

6.0m STS500/6 Trench Sheet

ISSUED FORCONSTRUCTION

Title

PROJECT NUMBER

Client

FAX: (02) 9829 2177PH: (02) 8796 5000

46 Williamson Road Ingleburn NSW 2565www.coateshire.com.au

A.B.N: 99 074 126 971

REV DATE COMMENTSA 19/10/13 PROPOSAL

DESIGNED DRAWN CHECKED DATE FIRST ISSUE

REVISIONDWG NUMBER

0 0.5 2mscale @

1:75PAPER SIZE: A3 SCALE: AS INDICATED

1.51

B 21/10/13 PROPOSALC 18/12/13 PROPOSALD 18/03/14 ISSUED FOR CONSTRUCTION


Turnkey Solutions & Installation Model

Our turnkey solution began as a customer project site support offering, focusing on dewatering andstructural propping services. This includes not only the provision of engineering support and great product solutions but also a team of qualified site engineers that can install the products safely and then support the project at every stage up to completion.

We have decided to further develop the turnkey solutions model to other areas of our specialist product portfolio and to enhance the offering by building a team of fully trained and accredited riggers andengineers that can project manage from conceptual designs through to installation.

Qualified Project Managers oversee the process from start to finish and with the full support of ourengineering team we can now partner with our customers to supply an exceptional and unique installation service. This single point of contact streamlines the process and means we can react quickly to fulfil customer expectations.

Our engineers are able to sign off installations and quickly manage any variations to an agreeable outcome, reducing down time and speeding up processes. This provides our customers with great value and peace of mind knowing that a single source solution is eliminating the need for multiple contractors on the project to achieve the same goal, reducing valuable down time and saving time and money along the way.


Specialist Products and Services

• Largest range of structural propping equipment in Australia, with national branch footprint• Fleet consisting of Acrow Props, Tilt Props, Titan Props, Tri-shores and Heavy Duty System props, along

with all associated products• Ongoing support from design through to site installation

• Widest and largest fleet of Standard Shoring equipment available in Australia through a specialist branch network• Includes light weight Aluminium Shoring boxes, light duty and heavy duty Steel range of shoring boxes

with both ‘Digging’ and ‘Shield’ types available• Super high strength range of SBH Slide Rail trenching solutions capable of supporting linear trenches and standard excavations up to 9m deep and 9m wide dependent on construction method and soil types• A unique and fully NATA accredited range of Access, Egress and trench safety equipment, including

Hand Rails, Fall Arrest and Rescue Davit solutions, all products designed and compliant to Australian standards

STRUCTURAL PROPPING

STANDARD SHORING



HYDRAULIC SHORING• High strength large span Hydraulic perimeter shoring frames ideally suited to support large scale

excavations for the construction of Tank Farms, Water Holding Structures, large scale Manholes, cofferdams and excavations associated with infrastructure projects

• Range of high strength Hydraulic tubular Shoring props suited to complement our range of heavy duty perimeter systems or work independently to support major construction excavations such as underground basements, large infrastructure Cofferdams and major water related excavations such as pumping stations

• Combinations and solutions are endless and only restricted by engineering design loads. Our 250 ton capacity Hydraulic shoring prop can span in excess of 40m across the site

• Turnkey solutions can be offered for more difficult installations• Hydraulic Shoring products can be pre-stressed as part of the installation process to limit the deflection

in the supported wall• Loads can be monitored inside the props via latest technology Telemetry systems, giving peace of mind

for both contractors and their clients


We provide expertise and equipment to safely control lifting and weighing of heavy structures, especially major infrastructure assets and mining equipment:• Our synchronous jacking system provides one of the safest methods of lifting and lowering heavy

assets• High degree of accuracy and rapid productivity• Centre of gravity and weight functionality• User friendly software with out of tolerance alarms and data recording capabilities• Controls uneven distribution of loads• End-to-end solutions with project site support

Coates Hire has a range of options to treat waste water. Our products generally require a small footprint while maintaining discharge quality and managing costexpectations. Our water management plans are bespoke to individual site requirements. We base our designs on achieving the ANZECC water guidelines and therefore meet state and national legislation requirements forwater discharge. We offer basic water treatment solutions to advance systems that have primary, secondary and tertiary treatment regimes. We can facilitate the removal of metals, Organics, Non-Organic compounds(Hydrocarbons), basic pH correction and more.Our latest product offering is an all in one CEPT watertreatment unit that provides data logging and deals with the most difficult applications.• Sediment Control units• Turbidity Control units• pH Dosing units• Reverse Osmosis• Modular and Scalable Water Treatment Systems• Water management plans (ANZECC Compliant)• Hydrologist and Environmental Engineers


SYNCHRONISED JACKING

WATER TREATMENT

10 //Engineering and Product Solutions Contact us: 13 15 52 | [email protected]

Coates Hire look to supply cutting edge latest technology equipment along with the best engineeringsupport for our customers.It is our goal to continue this approach through the introduction of new products to extract the water as efficiently as possible and treat that water before discharging to an agreed source. We understandsensitivities of environmental matters and that more emphasis is being placed on water treatment prior to discharge. With this in mind, the Specialist Water Management team have searched the globe for best in class products to provide this service to the market. Coupled with an experienced installation team in each State, and Hydrologists in the engineering team to develop ‘Water Plans’ to satisfy stringent legislation we truly can provide exceptional packages in this space.• Specialists in Well Point dewatering, Sump Pumping and deep well construction• Mine dewatering• Horizontal dewatering capabilities• Water Diversions and Sewer Bypass• 24 hour management• Water Treatment packages• Solutions including design, approvals, specification, installation and management• Data Logging/ Remote Telemetry


PUMPS & WATER MANAGEMENT

TRAFFIC MANAGEMENTOur range of Steel, Concrete and Plastic road barriers is the mostcomprehensive and up to date available in today’s market. Withenormous fleet holdings, no job is too large for our TrafficManagement team. Our dedicated traffic team, survey, design and install for any application from specialist branches locatedthroughout Australia. Our range of complimentary products such as Message Boards and Barrier Fencing Panels provide the completeservice for your project and our teams of installation engineers will even lay them too.• Traffic barriers, concrete, steel and plastic, including crash cushion• Delineators• Traffic lights, Variable Message Boards and Truck Mounted

Attenuators (TMA’s)• Traffic - Plates, Bridges & Grids• Temporary Fencing• CCTV Cameras/Traffic Sensors


Access Air & Air Accessories Compaction Concrete & Masonry Earthmoving Floor and Cleaning Equipment Generators & Power Distribution Industrial tools & Equipment

Ladders & Scaffold Landscaping Lift & Shift Lighting Materials Handling Portable Buildings & Toilets Propping Pumps & Fluid Management

Shoring Tools & Equipment Traffic Management Training (RTO) Trucks, Vehicles & Trailers Welding

COATES HIRE’S AVAILABLE PRODUCT RANGE:

At Coates Hire, you’ll find an unmatched range of equipment, available and ready to hire. We stock Australia’s largest fleet from general hire gear and specialist products, to total site solutions.With the largest branch network in Australia, you are backed by one of the country’s largest deliverynetworks.

While Coates Hire makes every effort to supply the equipment described and pictured in this brochure, all equipment offered is subject to availability. Should Coates Hire through whatever circumstances need to offer an alternative make or model, customers can be assured that this will be of the same quality as the item shown or displayed in this brochure. All information about equipment in this brochure is to the best of our knowledge correct, but we would urge customers to check all details at the time of hire or enquiry. Coates Hire reserves the right to change information without prior notice.