SPYDERLOKCable Tray � Accessories � Raceway

Manufacturing Ltd.

GENERAL CONDITIONS OF SALE

Terms: Net 30 days, unless otherwise stated. Interest on overdue accounts is calculated at 2% permonth. In the event the customer requests a delay in shipment, payment becomes due 30 daysfollowing the originally scheduled shipping date. Federal and Provincial Sales Taxes are extra whereapplicable.

Shipping:

1) Cable tray is always shipped F.O.B. our plant, Coquitlam, B.C. regardless of freight payment terms.

2) F.O.B. “Freight On Board” denotes that title to the shipment passes to the purchaser at the instantthat the carrier signs the bill of lading. It is the responsibility of the purchaser to ensure that theshipment is received in good order, and to file a Damaged in Transport Claim with the carriershould there be damages. Code is not responsible for any liability arising thereof, and cannot beinvolved in any recovery process.

3) Code will not accept any return shipment due to transport damage.

4) Should repair or replacement of goods be necessary a new purchase order must be issued to CodeManufacturing. The purchaser is responsible for payment of both purchase orders.

Estimated Shipping Dates: Wherever and whenever possible Code Manufacturing Ltd. (the Company)will endeavor to ship the goods on the specified date(s). At no time shall the purchaser hold Coderesponsible for any delay or damage incurred due to acts of God, priorities, orders or restrictionimposed by the Government, delays in transport, delays from our suppliers or delays due to labourand all delays beyond the control of Code Manufacturing Ltd.

Claims: Claims for errors or shortages must be made within five (5) days of receipt of goods.

Pricing: Goods will be billed at the price effective at the time of the order. All prices are subject tochange without notice.

Special Orders: For items not normally stocked by Code Manufacturing Ltd. we reserve the right toship and charge 10% above or below the quantity specified on the order. Special orders cannot becancelled. If cancellation occurs, Code will insist on payment for work performed, costs incurred andloss of profits.

Cancellations: After an order has been accepted it may be cancelled only with Code Manufacturing’swritten approval.

Return Material Policy: Only unused products in new condition and not more than one-year-old willbe considered for return. Permission to return material must be obtained IN WRITING from theCompany prior to return. Upon approval and issue of an RMA (return merchandise authorization)products may be returned for exchange for other goods of equal value. Request for return must givethe date and invoice number covering the original shipment. A service charge will apply to all goodsaccepted for return. All returns are to be shipped prepaid to our plant at the risk of the consignor. TheRMA must accompany the material(s). Custom and or items not stocked by Code are non-returnable.

Minimum Billing: $100.00 Net of transport and taxes.

SPYDERLOK

1

THE COMPANY

Code Manufacturing Ltd. is a leading manufacturer of cable tray systems. We have a30,000 sq. foot manufacturing facility in Coquitlam, B.C. and are 100% Canadianowned and operated. Our professional, seasoned sales staff and an IBEW (local 258)union labour force take pride in the quality of the workmanship from conception tofinished product. Our Code line of Cable Trays, Raceways and Accessories are CSAapproved and manufactured from the best possible materials and design. Ourmission is to provide exceptional quality and service which means delivery on timeas promised. Code Manufacturing Ltd. never forgets that your project depends onour performance.

Code Tray can be found in a variety of industrial, institutional and commercialapplications. We have supplied cable tray worldwide and continue to be innovativein our design features and custom modifications.

Code tray is consistently chosen for:

� Our unique “labour saver” SPYDERLOK Connector

� Allows for easy, fast installation

� No bolts or washers required

� Back welded rungs – unique to Code Tray

� Quick delivery on time

� Product quality

� Ease of custom modifications and sizes

� CAD Design assistance

� CNC punching and forming capabilities

#100 - 2050 Hartley Avenue, Coquitlam, BC V3K 6W5

SPYDERLOK

2

CODE MANUFACTURING LTD.Quick Find Index

GENERAL INFORMATION

Company Description .........................................................................................................1

Technical Data: Structural Design.................................................................................3Terms and Definitions.....................................................................4, 5Materials ..........................................................................................6, 7Finishes ................................................................................................8Grounding & Installation ....................................................................9Hot Dip vs Aluminum .................................................................10, 11Siderail Profiles ...........................................................................12, 13Load Capacity ....................................................................................14

Catalogue Numbers..........................................................................................................15

PRODUCT INFORMATION

Cable Tray Straight Lengths .......................................................................................16-19

Fittings ..........................................................................................................................20-25

Instrumentation Channel ............................................................................................26-27

Cover.............................................................................................................................28-29

Cable Tray Accessories................................................................................................30-35

SPYDERTRAY – Center Hung Tray...................................................................................36

Ladder Ventilated Solid

(Aluminum)Tees Horizontal Elbow Reducer Fittings

Outside/InsideVertical ElbowCrosses

Straight Lengths Cover Fitting Covers

Straight Channel Channel Cover Channel Fittings

SPYDERLOK

3

TECH

NIC

AL

STRUCTURAL DESIGN

DESIGN

Code cable tray and fittings are manufactured to CSA standard C22.2 Nn. 126.1-98(latest version) from designs offering unprecedented attention to detail and ease ofinstallation.

All Code designs are symmetrical, achieving maximum strength from minimummass and feature reinforcing ribs on the side rail for strength. In addition, Codesiderails combined with the low profile rung design, offer the greatest usable insideheight available in the industry.

Code’s unique SPYDERLOK connector requires only four fasteners per tray. No boltsor washers are required. The speed with which SPYDERLOK can be installed reduceslabour costs over competitive coupling devices and ensures swift installation of trayand fittings, while providing continuity of side rail alignment and strength.

In short, Code’s careful designs have been engineered from improvements and inputfrom the industry and on exceeding all existing specifications.

SMOOTH EDGES

All aspects of both tray and rungs feature rounded edges and flat smooth surfaces toprevent damage when in contact with cables.

CONSTRUCTION

The I-Beam configuration used in the design of side rails for Code Aluminum Trayensures maximum transverse and longitudinal strength. In ladder and ventilateddesigns, rung spacing is uniform both between rungs and between sections. SteelTray siderails and rungs are continuously roll formed for added strength and toensure smooth edges to protect cables. Our steel rungs are slotted to accommodatepipe and cable clamps.

All Code cable tray and fittings ensure optimal strength and bonding characteristicsby means of welding. Metal Inert Gas (M.I.G.) welding is a semi-automatic processusing inert-gas shroud over a consumable wire electrode which transfers current tomelt the base material. A filler metal is also added for reinforcement. Code cabletrays offer superior welding strength because our rungs are welded on both the frontas well as the back of the rungs. This is unique to Code tray and adds additionalstrength to every piece of Code tray.

Our siderails and rungs are designed to allow users to attach a UC clamp withoutdrilling or tapping the siderail.

SPECIAL ORDERS

Code cable tray systems have been designed to easily accept special orders to suitthe specification of your job. From connectors to join Code tray to competitiveproducts, to custom tray widths, to covers for any cable tray system on the market.Our manufacturing facility has full CAD design and CNC punching and formingcapabilities. Code’s customer service staff will handle your request for quotation anddelivery lead times quickly and efficiently – there is nothing "too custom"!

SPYDERLOK

4

TECHN

ICAL

TERMS AND DEFINITIONS

Accessories A component that is used to supplement the function ofa straight section or fitting. Examples include, but are notlimited to, dropout, cover, conduit adapter, hold-downdevices, and divider

Cable Tray Support Span The distance between the centerlines of supports

Cable Tray System A unit or assembly of units or sections, and associatedfittings, forming a mechanical system used to supportcable and raceways.

Channel Cable Tray A fabricated structure consisting of a one-pieceventilated –bottom or solid-bottom channel section, notexceeding 152 mm (6") in width

Connector A component that joins a combination of cable traystraight sections and fittings. The basic types ofconnectors include rigid, expansion, adjustable, andreducer.

Fitting A component that is used to change the size or directionof a cable tray system.

Horizontal Cross A fitting that joins cable trays in four directions at 90-degree intervals in the same plane.

Horizontal Elbow A fitting that changes the direction of cable tray in thesame plane

Horizontal Tee A fitting that joins cable trays in three directions at 90degree intervals in the same plane.

Ladder Cable Tray A fabricated structure consisting of two longitudinal siderails connected by individual transverse members(rungs)

Reducer A fitting that joins cable trays of different widths in thesame plane.

Left-hand reducer A reducer having, when viewed from the large end, astraight side on the left.

Right-hand reducer A reducer having, when viewed from the large end, astraight side on the right.

Straight reducer A reducer having two symmetrical offset sides.

SPYDERLOK

5

TECH

NIC

AL

Solid-Bottom or

Nonventilated Cable Tray A fabricated structure consisting of a bottom withoutventilation openings within integral or separatelongitudinal side rails.

Straight Section A length of cable tray that has no change in direction orsize.

Support A component that provided a means for supporting acable tray, including, but not limited to, cantileverbracket, trapeze, and individual rod suspension.

Trough or

Ventilated Cable Tray A fabricated structure consisting of integral or separatelongitudinal rails and a bottom having openingssufficient for the passage of air and utilizing 75% or lessof the plan area of the surface to support cables. Themaximum open spacing between cable support surfacesof transverse elements do not exceed 102mm (4") in thedirection parallel to the tray side rails. (On horizontalbends only, the maximum distance between transverseelements is measured at the centerline of the bend.)

Vertical Elbow A fitting that changes the direction of cable tray to adifferent plane.

Inside Vertical Elbow A fitting that changes the direction of cable tray upwardfrom the horizontal plane.

Outside Vertical Elbow A fitting that changes direction of cable tray downwardfrom the horizontal plane.

Vertical Tee A fitting that joins cable trays in three directions at 90degree intervals in different planes.

CSA C22.2 No 126. 1–98

SPYDERLOK

6

TECHN

ICAL

MATERIALS

Code manufactures cable tray, fittings, and accessories from a variety of materialsthat can accommodate different environments. Important consideration should begiven to the corrosive conditions found in the environment in which the product willbe used.

Our cable tray is manufactured in the following types:

� Aluminum

� Mill-Galvanized Steel (Pre-Galvanized)

� Hot Dip-Galvanized Steel — after fabrication

� Stainless Steel

� Epoxy Coated

ALUMINUMCode aluminum siderail and rungs are manufactured from a structural grade 6063-T6"copper free" (.01%) aluminum extrusion. Fabricated parts are made from 5052 H32and 3003 H14. Most conditions are satisfied by aluminum tray and its finish is alwayssmooth. In addition, because of aluminum’s non-magnetic properties, it reduceselectrical losses to a minimum. Longer span tray systems are also available inaluminum

Advantages: � Corrosion resistance

� Excellent resistance to "weathering" & good for outdoorapplications

� Excellent grounding conductor

� Ideal for chemical, pulp mill and marine environments

� Excellent strength to weight ratio

� Light weight ( approximately 50% less than steel)

� Maintenance free and easy to install

SPYDERLOK

7

TECH

NIC

AL

STEELCode steel cable trays are manufactured from continuous roll formed structuralquality steel, which increases the mechanical strength allowing for lighter gaugesteel to carry the required load. Steel alone does not have the corrosion resistanceto maintain the structural integrity of the cable tray, therefore, additional protectionof supplementary coatings must be used.

Advantages: � Limited deflection

� Electric shielding

� Low thermal expansion

� High strength

� Low cost

Disadvantages:� Heavy to install

� Poor corrosion resistance

� Low electrical conductivity

STAINLESS STEEL Code manufactures stainless steel cable tray from AISI Type 304 or AISI Type 316stainless steel. Both are non-magnetic and exhibit increased strength when coldrolled or formed.

Code stainless steel cable trays are welded using stainless steel welding wire toensure we maintain the same corrosion resistant characteristic as the base metal.

Advantages: � Superior Corrosion Resistance

� Withstands High Temperatures

� Good yield strength

SPYDERLOK

8

TECHN

ICAL

FINISHES

PRE-GALVANIZED (HOT DIP MILL GALVANIZED)

Pre-galvanized steel is produced in a rolling mill where the steel is continuouslyrolled through molten zinc. These coils are then slit to size and fabricated by rollforming, shearing, punching, and forming to produce Code Tray.

The steel is a structural quality with a G90 coating thickness, which is .90 ounces ofzinc per square foot of steel, which results in .45 ounces per square foot on each sideof the sheet. This meets the minimum yield and textile strength. During fabrication,where slitting, forming, cutting, or welding is performed, the cut edges and heat-affected zone of welding are subject to superficial oxidation. These areas are thenprotected through electrolytic action of the adjacent zinc surfaces. The coating issmooth, ductile, and adherent. Code suggests that using a hot-dip galvanized finishfor indoor dry location. It is not recommended for outdoor use or in a corrosiveenvironment.

HOT DIP GALVANIZED AFTER FABRICATION

Code Hot Dip Galvanized cable tray products are fabricated from steel, assembledand then the entire tray is immersed in a bath of molten zinc. This zinc coating thencoats all surfaces, including edges and welds.

One advantage to this method is a thicker coating of zinc than a pre-galvanizedmaterial. Coating thickness is controlled by the amount of time a product isimmersed in the molten zinc and the speed of removal. Cable tray that has been hot-dip after fabrication has a minimum of 1.50 ounces per square foot on each side ofthe sheet, or a total of 3.0 ounces per square foot of steel.

This process is recommended for applications of prolonged outdoor exposure and inharsh industrial environments

EPOXY COATING

In certain circumstances an epoxy coated cable tray may be required, for eitherfurther corrosion resistance or aesthetic reasons. The cable tray would be coatedafter fabrication with a heat fused polyester electrostatically applied on aphosphatized base. Our standard colour is ASA 61 grey but consult the factory forother colour options available.

SPYDERLOK

9

TECH

NIC

AL

GROUNDING

The Canadian Electrical Code (C.E.C.) specifies under Rule 12-2210 when a cable traycan be considered bonded to ground.

Rule 12-2210 Provision for Bonding

(1) Where metal supports for metal cable trays are bolted to the tray and are in goodelectrical contact with the grounded structural metal frame of a building, the trayshall be deemed to be bonded to ground.

(2) Where the condition of Subrule (1) do not apply, the metal cable tray shall beadequately bonded at intervals not exceeding 15 m and the size of bondingconductors shall be based on the maximum rating or setting of an overcurrentdevice in the circuits by the cable tray in accordance with the requirements ofRule 10-814.

(C.E.C. Part 1. 1994)

_________________________________________________________________________________________For further information consult the Canadian Electrical Code.

INSTALLATION INSTRUCTIONS

Code cable tray systems are designed to be installed as a complete system consisting ofstraight lengths of tray and all necessary fittings (ie: elbows, tees, crosses) to permitchanges in direction.

The straight lengths and fittings should be connected together with SPYDERLOKconnectors to ensure good mechanical connection and bonding in accordance with CSArequirements.

SPYDERLOK connectors joining cable trays to each other or to their fittings shall belocated within one quarter of the span (support spacing) from the supports.

Supports or cantilever brackets for cable tray shall be so installed that the span betweensupports shall not exceed those specified for the class of cable tray to be installed. Dataon the maximum allowable simple beam loading in kilograms per linear meter and themaximum recommended distance between additional supports for each loading is givenunder Standard Load Classes on page 14 of this catalogue.

When elbows, tees, and crosses of 600 mm radius and larger are installed, additionalsupports should be provided for these fittings. It is recommended that this should be atmid-arc.

In the event that Code cable tray be required to penetrate vertically through a dry floor,covers must be installed for 2 meters above the floor level to ensure that the cables aretotally enclosed.

Conductors in vertical runs of cable tray must be supported by UC or PC clamps or nyloncable ties independent of terminal connections. Support distances for specifiedconductor sizes are given in the Canadian Electrical Code.

Conductors must not be installed in Code cable tray systems until the installation hasbeen completed and the cables are reasonably safe from damage from the connectionoperation.

Note: Outdoor installations involving wind, ice or snow loads or any unusual applicationshould first be approved by your engineering department.

WARNING! Do not use as a walkway, ladder or support for personnel.

Use only as a mechanical support for cables, tubing and raceways.

SPYDERLOK

10

TECHN

ICAL

HOT-DIP GALVANIZED VS. ALUMINUM TRAY

One of the most important choices when designing a cable tray system for corrosiveor outdoor environments is the material. Steel cable tray with a Hot-Dip Galvanizedafter Fabrication (ASTM A123) finish has been used successfully for many years.Increasingly, however, aluminum is becoming the material of choice for cable traysystems. In these days of shrinking construction budgets, why would engineers,contractors, and end users choose aluminum cable tray, which typically has aslightly higher initial cost, over Hot-Dip galvanized steel cable tray? The answer liesin aluminum’s many advantages in design, installation, delivery, performance andtotal cost over the lifetime of the installation.

DESIGN AND INSTALLATION

Most people know of aluminum’s superior strength–to–weight ratio. For example, a36" wide, 24-foot section of ladder cable tray with a 6" side rail in hot dip galvanizedsteel cable tray weighs about 200 lbs., whereas the same cable tray in aluminumweighs only about 100 lbs. When installers must carry and put cable tray sectionsinto place, which may be 30’ or more above ground, aluminum’s lighter weight canmean the difference between needing just two installers instead of four.

Field cuts are also much easier with aluminum cable trays, not only becausealuminum is easier to cut, punch, and drill, but there is no need to apply a protectivecoating to the exposed edges. The hot-dip galvanized coating on steel must berepaired with a zinc rich paint (also called cold galvanizing) which is inferior to theoriginal galvanizing, leaving a chink in the steel’s armor against corrosion. Of coursethere is always the chance that some contractors may not repair the cuts at all,further impairing the cable tray’s corrosion resistance.

Because aluminum cable tray components are extruded, material can be used moreefficiently and tolerances remain tighter. Some manufacturers have used this to thecontractor’s advantage by creating splice joints and other features, which offer betterperformance and require less labour to install. And when using cable tray as anequipment grounding conductor (EGC), aluminum’s superior current carryingcapacity reduces the need to purchase and install a separate EGC (in qualifyingindustrial installations) and also increases the safety of the installation by providinga better fault current path.

DELIVERY AND AVAILABILITY

Aluminum cable tray systems can normally be shipped from the factory in a shortperiod of time. Small orders can ship in just a few days. Hot-dip galvanized cabletray systems take several days to fabricate, hot-dip galvanize, and prepare for finalshipment.

All cable tray manufactures must ship their cable tray to a third party to have themgalvanized. This requires that the cable tray be manufactured, packed and shipped tothe galvanizer. The material is then returned to the plant after galvanizing to inspectand debur the product prior to packing and final shipment. The cost of a delay ingetting material to the job site is many times the cost of the material itself and usingaluminum cable tray helps to minimize the chance of delays.

SPYDERLOK

11

TECH

NIC

AL

Hot dip galvanized steel cable tray covers pose another problem. Placing thin gaugesteel covers in a hot zinc bath will often cause the covers to warp. To avoid thisproblem, thicker material is used and the covers are limited to five feet long. Theextra material and the extra labour required to install shorter covers have asignificant impact on the cost of the entire cable tray system.

PERFORMANCE

Aluminum cable tray has excellent corrosion resistance in many chemicalenvironments and has been used for over thirty years in petro-chemical plants andpaper mills. The aluminum alloy used by cable tray manufactures is 6063-T6, whichis considered copper-free and sometimes referred to as marine grade aluminum.Although copper-free aluminum may experience some chloride pitting in a marineenvironment, this corrosion is limited and does not affect the structural integrity ofthe system.

Galvanizing on steel cable trays is designed to slowly wear away as it protects thesteel; any place where the coating is thin or has been removed can prematurely limitthe product’s service life. Since aluminum cable trays are homogenous materialthroughout, their service life is unaffected by scratches and field modifications.When aluminum cable trays are used with stainless steel hardware, the system canperform indefinitely, with little or no degradation over time, making it ideal for manychemical and marine environments.

TOTAL COST

Aluminum’s many advantageous features like its corrosion resistance, superiorstrength-to weight ratio, ease of field modifications, fast delivery and availability,and labour saving installation all add up to a system well worth the extra initialprice.

Code Manufacturing Ltd has recently narrowed the relative cost of aluminum tosteel, making the choice between aluminum and steel no contest.

______________________________________________________________________________

CTI Technical Bulletin Number 13, A Publication of the Cable Tray Institute

SPYDERLOK

12

TECHN

ICAL

TECHNICAL INFORMATION

ALUMINUM SIDERAIL PROFILES

CSA CLASS C1 D1 E

RATED Actual 3m 6m 6mSPAN (Nominal) (10 ft) (20 ft) (20 ft)

TYPE OF TRAY LADDER LADDER LADDER

CAT NO C1 C6 D1 D6 E1 E6

MATERIAL

Aluminum

Dimensions in mm

TYPE OF TRAY SOLID

Solid TrayAluminum

Instrumentation PUNCHED SOLID SECTION

Channel Tray

Aluminum

RUNG NARROW RUNG WIDE RUNGPROFILES (for 15cm – 60cm width) (for 75cm & 90 cm width)

Aluminum

102

150

25

25

25

25

Profile C-1

Profile C-6

12

21

H

19

115

150

36

42

36

42

Profile D1

Profile D6

115

150

36

50

36

50

Profile E1

Profile E6

SPYDERLOK

13

TECH

NIC

AL

TECHNICAL INFORMATION

STEEL SIDERAIL PROFILES

CSA CLASS C1 D1 ERATED Actual 3m 3m & 6m 6mSPAN (Nominal) (10 ft) ( 10 ft & 20 ft) (20 ft)

TYPE OF TRAY LADDER LADDER LADDER

CAT NO C1 C6 D1 D6 E1 E6

MATERIAL

SteelPre-galvanizedHot-dip Galvanized

Dimensions in mm

TYPE OF TRAY SOLID

Solid TrayPre-galvanized

Instrumentation PUNCHED SOLID SECTION

Channel Tray

Steel

RUNGPROFILES

Steel0.500

0.938

0.875

0.938

0.500

4.500

0.656

12.000

12

21

H

19

16 GA 16 GA

102

32

3215

0

19 19

16 GA 16 GA

32

115 15

0

32

19 19

14 GA 14 GA

115

32

150

32

1919

SPYDERLOK

14

TECHN

ICAL

HOW TO CHOOSE THE TYPE OF CABLE TRAY REQUIRED

1. Select Material and Finish Code Tray is offered in a variety of material types andfinishes – aluminum, steel, stainless steel, epoxy coated. Refer to material andfinishes on p.6-8 for more detail. Consideration must be given to corrosiveenvironment, cost and application.

2. Select the Class of Tray See table below to refer to the CSA load/span classdesignation. The classes are C1, D1, and E and you will note that the maximumdesign load varies depending on the class and support spacing.

Load / Span Class designation (CSA C22.2 #126-M 1999)

Note: 8A /B/C, 12A/B/C, 16A/B/C AND 20A/B/C are the traditional NEMAdesignations. A,C,D, and E are the conventional CSA designations.

Code cable tray systems areManufactured to conform to thestandard load classes of CSA as follows:

3. Select the Type of Tray There are three different types of cable tray:Ladder / Ventilated / Solid

4. Select Tray Size There are different widths and heights of cable tray and what yourequire will depend on number, size, spacing and weight of the cables in the tray.Code standard widths are available in 15cm, 30cm, 45cm, 60cm, 75cm, and 90cm.

Height is available for the siderail as follows:C1 = 102mm D1 & E1 = 115mm C6, D6, E6 = 150mm

5. Select the Fittings Cable tray fittings are designed to change the direction of thecable tray. One must consider the radius of the bend, whether vertical orhorizontal. Standard radius are available in 30cm, 60cm, 90cm. Custom sizes canbe factory ordered.Fittings are also used for angle situations and are available in 30°, 45°, 60°, and90°.

Span, m (ft)

Load kg /m (lb/ft) 2.4(8) 3.0(10) 3.7(12) 4.9(16) 6.0(20)

37 (25) A

67 (45) D

74 (50) 8A 12A 16A 20A

97 (65) C

112 (75) 8B 12B 16B E

149 (100) 8C 12C 16C 20C

179 (120) D

299 (200) E

CSA Class Code Rated Load Rated Span

Designation Designation (Kg / m) (m)

C1 C 97 3C6 97 3

D1 D 67 6D6 67 6

E E 112 6E6 112 6

SPYDERLOK

15

HOW TO USE THIS CATALOGUE

Your Code Catalogue has been carefully organized for ease of use. Please follow theguide below to help you find the cable tray, fittings and accessories you require.

Master Part Number Interpretation Guide CSA Approved / UL Listed

Fitting orMaterial Fitting/ Angle Code/CSA Rung Tray / Accessory Accessory

Designation Accessory Tray Type Fitting Designation Spacing Width RadiusDesignation

(Degree) cm in cm in cm in

S=Steel E=Horizontal Elbow L=Ladder 90° C1=C 15 6 15 6 90 36

A=Aluminum X=Horizontal Cross V=Ventilated 60° C6 22.5 9 30 12 60 24

HD=Hot T=Horizontal Tee S=Solid 45° D1=D 30 12 45 18 30 12

Dipped Galv. IV=Inside Vertical 30° D6 45 18 60 24

SS=Stainless OV=Outside Vertical E=E 75 30

Steel E6 90 36

STRAIGHT SECTION PART NUMBER SYSTEM

A L D 30 – 30

Material Style Class Rung Spacing Widthcm in cm in

A=Aluminum L=Ladder C 102mm 15 6 15 6

S=Steel V=Ventilated C6 150mm 22 9 30 12

HD=Hot S=Solid D 115mm 30 12 45 18

Dipped Steel D6 150mm 45 18 60 24

SS=Stainless E 115mm 75 30

Steel E6 150mm 90 36

FITTING SECTION PART NUMBER SYSTEM

A IV L 90 C 30 30

Material Fitting Type Style Degree of Bend Class Width Radius(if applicable) Height cm in cm in

A=Aluminum E=Horizontal Elbow L=Ladder 90° C 102mm 15 6 30 12

S=Steel IV=Inside Vertical V=Ventilated 60° C6 150 30 12

HD=Hot OV=Outside Vertical S=Solid 45° D 115 45 18 60 24

Dipped Steel T=Tee 30° D6 150 60 24

SS=Stainless X=Cross E 115 75 30 90 36

Steel E6 150 90 36

➔ ➔ ➔ ➔ ➔

➔ ➔ ➔ ➔ ➔ ➔ ➔

SPYDERLOK

16

STRAIGHT LENGTHS – ALUMINUM & STEEL

CSA Class C – 102mm (4”) siderail; 3m (10 ft)

RUNGMATERIAL STYLE CLASS SIDERAIL SPACING

A Aluminum L Ladder C 102mm (4”) cm in

S Pre-Galv Steel V Ventilated D,E 115mm (4 1/2”) 15 6

HD Hot Dipped Steel S Solid C6, D6, E6 150mm (6”) 22.5 9

SS Stainless Steel 30 12

45 18

STYLE PREFIX RUNG SPACING WIDTHcm in cm in

Ladder ALC 15 6 15 6

SLC 22.5 9 30 12

HDLC 30 12 45 18

SSLC 45 18 60 24

75 30

90 36

Ventilated AVC Maximum 50mm (2”) 15 6

SVC spacing between 30 12

HDVC Rungs 45 18

SSVC 60 24

75 30

90 36

Solid ASC N/A 15 6

SSC 30 12

HDSC 45 18

SSSC 60 24

Note: All Cable tray comes complete with 2 Spyderlok Connector plates & hardware.

Example: A L C 30 - 30

CLASS C TRAY

SPYDERLOK

17

STRAIGHT LENGTHS – ALUMINUM & STEEL

CSA Class C6 – 150mm (6”) siderail; 3m (10 ft)

RUNGMATERIAL STYLE CLASS SIDERAIL SPACING

A Aluminum L Ladder C 102mm (4”) cm in

S Pre-Galv Steel V Ventilated D,E 115mm (4 1/2”) 15 6

HD Hot Dipped Steel S Solid C6, D6, E6 150mm (6”) 22.5 9

SS Stainless Steel 30 12

45 18

Example: A L C6 30 - 30

STYLE PREFIX RUNG SPACING WIDTHcm in cm in

Ladder ALC6 15 6 15 6

SLC6 22.5 9 30 12

HDLC6 30 12 45 18

SSLC6 45 18 60 24

75 30

90 36

Ventilated AVC6 Maximum 50mm (2”) 15 6

SVC6 spacing between 30 12

HDVC6 Rungs 45 18

SSVC6 60 24

75 30

90 36

Solid ASC6 N/A 15 6

SSC6 30 12

HDSC6 45 18

SSSC6 60 24

Note: All Cable tray comes complete with 2 Spyderlok Connector plates & hardware.

CLA

SS C

6 TR

AY

SPYDERLOK

18

STRAIGHT LENGTHS – ALUMINUM & STEEL

CSA Class D1, E1 – 115mm (4 1/2”) siderail; 6m (20 ft)Note D1 in steel available in 3m & 6m

RUNGMATERIAL STYLE CLASS SIDERAIL SPACING

A Aluminum L Ladder C 102mm (4”) cm in

S Pre-Galv Steel V Ventilated D,E 115mm (4 1/2”) 15 6

HD Hot Dipped Steel S Solid C6, D6, E6 150mm (6”) 22.5 9

SS Stainless Steel 30 12

45 18

STYLE PREFIX RUNG SPACING WIDTHcm in cm in

LADDER ALD 15 6 15 6

SLD 22.5 9 30 12

HDLD 30 12 45 18

SSLD 45 18 60 24

ALE 75 30

SLE 90 36

HDLE

SSLE

VENTILATED AVD Maximum 50mm (2”15 6

SVD spacing between 30 12

HDVD Rungs 45 18

SSVD 60 24

AVE 75 30

SVE 90 36

HDVE

SSVE

SOLID ASD N/A 15 6

SSD 30 12

HDSD 45 18

SSSD 60 24

ASE

SSE

HDSE

SSSE

Note: All Cable tray comes complete with 2 Spyderlok Connector plates & hardware.

Example: A L D 30 - 30

CLASS D

1, E1 TRAY

SPYDERLOK

19

STRAIGHT LENGTHS – ALUMINUM & STEEL

CSA Class D6, E6 – 150mm (6”) siderail; 6m (20 ft)Note D6 in steel available in 3m & 6m

RUNGMATERIAL STYLE CLASS SIDERAIL SPACING

A Aluminum L Ladder C 102mm (4”) cm in

S Pre-Galv Steel V Ventilated D,E 115mm (4 1/2”) 15 6

HD Hot Dipped Steel S Solid C6, D6, E6 150mm (6”) 22.5 9

SS Stainless Steel 30 12

45 18

STYLE PREFIX RUNG SPACING WIDTHcm in cm in

LADDER ALD6 15 6 15 6

SLD6 22.5 9 30 12

HDLD6 30 12 45 18

SSLD6 45 18 60 24

ALE6 75 30

SLE6 90 36

HDLE6

SSLE6

VENTILATED AVD6 Maximum 50mm (2”) 15 6

SVD6 spacing between 30 12

HDVD6 Rungs 45 18

SSVD6 60 24

AVE6 75 30

SVE6 90 36

HDVE6

SSVE6

SOLID ASD6 N/A 15 6

SSD6 30 12

HDSD6 45 18

SSSD6 60 24

ASE6

SSE6

HDSE6

SSSE6

Note: All Cable tray comes complete with 2 Spyderlok Connector plates & hardware.

Example: A L D6 30 - 30

CLA

SS D

6, E

6 TR

AY

SPYDERLOK

20

HORIZONTAL ELBOW FITTINGSALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:

MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)A Aluminum L Ladder (L) 90 Class Ref: cm inS Pre-Galv Steel V Ventilated (V) 60 C 102 4HD Hot Dipped Steel S Solid (S) 45 D, E 115 4 1/2SS Stainless Steel 30 C6, D6, E6 150 6

HORIZONTAL 90 DEGREE ELBOWRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)E(Style)90(Class Ref)-15-3030 (Material)E(Style)90(Class Ref)-30-3045 (Material)E(Style)90(Class Ref)-45-3060 (Material)E(Style)90(Class Ref)-60-3075 (Material)E(Style)90(Class Ref)-75-3090 (Material)E(Style)90(Class Ref)-90-30

60 15 (Material)E(Style)90(Class Ref)-15-6030 (Material)E(Style)90(Class Ref)-30-6045 (Material)E(Style)90(Class Ref)-45-6060 (Material)E(Style)90(Class Ref)-60-6075 (Material)E(Style)90(Class Ref)-75-6090 (Material)E(Style)90(Class Ref)-90-60

90 15 (Material)E(Style)90(Class Ref)-15-9030 (Material)E(Style)90(Class Ref)-30-9045 (Material)E(Style)90(Class Ref)-45-9060 (Material)E(Style)90(Class Ref)-60-9075 (Material)E(Style)90(Class Ref)-75-9090 (Material)E(Style)90(Class Ref)-90-90

HORIZONTAL 60 DEGREE ELBOWRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)E(Style)60(Class Ref)-15-3030 (Material)E(Style)60(Class Ref)-30-3045 (Material)E(Style)60(Class Ref)-45-3060 (Material)E(Style)60(Class Ref)-60-3075 (Material)E(Style)60(Class Ref)-75-3090 (Material)E(Style)60(Class Ref)-90-30

60 15 (Material)E(Style)60(Class Ref)-15-6030 (Material)E(Style)60(Class Ref)-30-6045 (Material)E(Style)60(Class Ref)-45-6060 (Material)E(Style)60(Class Ref)-60-6075 (Material)E(Style)60(Class Ref)-75-6090 (Material)E(Style)60(Class Ref)-90-60

90 15 (Material)E(Style)60(Class Ref)-15-9030 (Material)E(Style)60(Class Ref)-30-9045 (Material)E(Style)60(Class Ref)-45-9060 (Material)E(Style)60(Class Ref)-60-9075 (Material)E(Style)60(Class Ref)-75-9090 (Material)E(Style)60(Class Ref)-90-90

FITTING

S

Example:A E L 90 D 30 - 60

90°

RW

60°

RW

SPYDERLOK

21

HORIZONTAL ELBOW FITTINGSALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:

MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)A Aluminum L Ladder (L) 90 Class Ref: mmS Pre-Galv Steel V Ventilated (V) 60 C 102 (4”)HD Hot Dipped Steel S Solid (S) 45 D, E 115 (4 1/2”)SS Stainless Steel 30 C6, D6, E6 150 (6”)

HORIZONTAL 45 DEGREE ELBOWRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)E(Style)45(Class Ref)-15-3030 (Material)E(Style)45(Class Ref)-30-3045 (Material)E(Style)45(Class Ref)-45-3060 (Material)E(Style)45(Class Ref)-60-3075 (Material)E(Style)45(Class Ref)-75-3090 (Material)E(Style)45(Class Ref)-90-30

60 15 (Material)E(Style)45(Class Ref)-15-6030 (Material)E(Style)45(Class Ref)-30-6045 (Material)E(Style)45(Class Ref)-45-6060 (Material)E(Style)45(Class Ref)-60-6075 (Material)E(Style)45(Class Ref)-75-6090 (Material)E(Style)45(Class Ref)-90-60

90 15 (Material)E(Style)45(Class Ref)-15-9030 (Material)E(Style)45(Class Ref)-30-9045 (Material)E(Style)45(Class Ref)-45-9060 (Material)E(Style)45(Class Ref)-60-9075 (Material)E(Style)45(Class Ref)-75-9090 (Material)E(Style)45(Class Ref)-90-90

HORIZONTAL 30 DEGREE ELBOWRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)E(Style)30(Class Ref)-15-3030 (Material)E(Style)30(Class Ref)-30-3045 (Material)E(Style)30(Class Ref)-45-3060 (Material)E(Style)30(Class Ref)-60-3075 (Material)E(Style)30(Class Ref)-75-3090 (Material)E(Style)30(Class Ref)-90-30

60 15 (Material)E(Style)30(Class Ref)-15-6030 (Material)E(Style)30(Class Ref)-30-6045 (Material)E(Style)30(Class Ref)-45-6060 (Material)E(Style)30(Class Ref)-60-6075 (Material)E(Style)30(Class Ref)-75-6090 (Material)E(Style)30(Class Ref)-90-60

90 15 (Material)E(Style)30(Class Ref)-15-9030 (Material)E(Style)30(Class Ref)-30-9045 (Material)E(Style)30(Class Ref)-45-9060 (Material)E(Style)30(Class Ref)-60-9075 (Material)E(Style)30(Class Ref)-75-9090 (Material)E(Style)30(Class Ref)-90-90

45°

RW

FITT

ING

S

30°

RW

Example:A E L 45 D 30 - 30

SPYDERLOK

22

INSIDE/OUTSIDE VERTICAL RISER FITTINGSALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:

MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)A Aluminum L Ladder (L) 90 Class Ref: mmS Pre-Galv Steel V Ventilated (V) 60 C 102 (4”)HD Hot Dipped Steel S Solid (S) 45 D, E 115 (4 1/2”)SS Stainless Steel C Cover (C) 30 C6, D6, E6 150 (6”)

INSIDE/OUTSIDE 90° VERTICAL RISERSRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)IV(Style)90(Class Ref)-15-3030 (Material)IV(Style)90(Class Ref)-30-3045 (Material)IV(Style)90(Class Ref)-45-3060 (Material)IV(Style)90(Class Ref)-60-3075 (Material)IV(Style)90(Class Ref)-75-3090 (Material)IV(Style)90(Class Ref)-90-30

60 15 (Material)IV(Style)90(Class Ref)-15-6030 (Material)IV(Style)90(Class Ref)-30-6045 (Material)IV(Style)90(Class Ref)-45-6060 (Material)IV(Style)90(Class Ref)-60-6075 (Material)IV(Style)90(Class Ref)-75-6090 (Material)IV(Style)90(Class Ref)-90-60

90 15 (Material)IV(Style)90(Class Ref)-15-9030 (Material)IV(Style)90(Class Ref)-30-9045 (Material)IV(Style)90(Class Ref)-45-9060 (Material)IV(Style)90(Class Ref)-60-9075 (Material)IV(Style)90(Class Ref)-75-9090 (Material)IV(Style)90(Class Ref)-90-90

INSIDE/OUTSIDE 60° VERTICAL RISERSRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)IV(Style)60(Class Ref)-15-3030 (Material)IV(Style)60(Class Ref)-30-3045 (Material)IV(Style)60(Class Ref)-45-3060 (Material)IV(Style)60(Class Ref)-60-3075 (Material)IV(Style)60(Class Ref)-75-3090 (Material)IV(Style)60(Class Ref)-90-30

60 15 (Material)IV(Style)60(Class Ref)-15-6030 (Material)IV(Style)60(Class Ref)-30-6045 (Material)IV(Style)60(Class Ref)-45-6060 (Material)IV(Style)60(Class Ref)-60-6075 (Material)IV(Style)60(Class Ref)-75-6090 (Material)IV(Style)60(Class Ref)-90-60

90 15 (Material)IV(Style)60(Class Ref)-15-9030 (Material)IV(Style)60(Class Ref)-30-9045 (Material)IV(Style)60(Class Ref)-45-9060 (Material)IV(Style)60(Class Ref)-60-9075 (Material)IV(Style)60(Class Ref)-75-9090 (Material)IV(Style)60(Class Ref)-90-90

Inside Vertical Riser

Outside Vertical Riser

Inside Vertical Riser

Outside Vertical Riser

NOTE:Use either “IV” or “OV” in catalogue #IV – Inside Vertical RiserOV – Outside Vertical Riser

NOTE:Use either “IV” or “OV” in catalogue #IV – Inside Vertical RiserOV – Outside Vertical Riser

FITTING

S

Example:A I V L 90 D 30 - 60

SPYDERLOK

23

FITT

ING

S

INSIDE/OUTSIDE VERTICAL RISER FITTINGSALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:

MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)A Aluminum L Ladder (L) 90 Class Ref: mmS Pre-Galv Steel V Ventilated (V) 60 C 102 (4”)HD Hot Dipped Steel S Solid (S) 45 D, E 115 (4 1/2”)SS Stainless Steel C Cover (C) 30 C6, D6, E6 150 (6”)

INSIDE/OUTSIDE 45° VERTICAL RISERSRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)IV(Style)45(Class Ref)-15-3030 (Material)IV(Style)45(Class Ref)-30-3045 (Material)IV(Style)45(Class Ref)-45-3060 (Material)IV(Style)45(Class Ref)-60-3075 (Material)IV(Style)45(Class Ref)-75-3090 (Material)IV(Style)45(Class Ref)-90-30

60 15 (Material)IV(Style)45(Class Ref)-15-6030 (Material)IV(Style)45(Class Ref)-30-6045 (Material)IV(Style)45(Class Ref)-45-6060 (Material)IV(Style)45(Class Ref)-60-6075 (Material)IV(Style)45(Class Ref)-75-6090 (Material)IV(Style)45(Class Ref)-90-60

90 15 (Material)IV(Style)45(Class Ref)-15-9030 (Material)IV(Style)45(Class Ref)-30-9045 (Material)IV(Style)45(Class Ref)-45-9060 (Material)IV(Style)45(Class Ref)-60-9075 (Material)IV(Style)45(Class Ref)-75-9090 (Material)IV(Style)45(Class Ref)-90-90

INSIDE/OUTSIDE 30° VERTICAL RISERSRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)IV(Style)30(Class Ref)-15-3030 (Material)IV(Style)30(Class Ref)-30-3045 (Material)IV(Style)30(Class Ref)-45-3060 (Material)IV(Style)30(Class Ref)-60-3075 (Material)IV(Style)30(Class Ref)-75-3090 (Material)IV(Style)30(Class Ref)-90-30

60 15 (Material)IV(Style)30(Class Ref)-15-6030 (Material)IV(Style)30(Class Ref)-30-6045 (Material)IV(Style)30(Class Ref)-45-6060 (Material)IV(Style)30(Class Ref)-60-6075 (Material)IV(Style)30(Class Ref)-75-6090 (Material)IV(Style)30(Class Ref)-90-60

90 15 (Material)IV(Style)30(Class Ref)-15-9030 (Material)IV(Style)30(Class Ref)-30-9045 (Material)IV(Style)30(Class Ref)-45-9060 (Material)IV(Style)30(Class Ref)-60-9075 (Material)IV(Style)30(Class Ref)-75-9090 (Material)IV(Style)30(Class Ref)-90-90

Inside Vertical Riser

Outside Vertical Riser

Inside Vertical Riser

Outside Vertical Riser

NOTE:Use either “IV” or “OV” in catalogue #IV – Inside Vertical RiserOV – Outside Vertical Riser

Example:A I V L 45 D 30 - 30

NOTE:Use either “IV” or “OV” in catalogue #IV – Inside Vertical RiserOV – Outside Vertical Riser

SPYDERLOK

24

FITTING

S

HORIZONTAL TEE FITTINGS

ALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)

A Aluminum L Ladder (L) 90 Class Ref: mmS Pre-Galv Steel V Ventilated (V) 60 C 102 (4”)HD Hot Dipped Steel S Solid (S) 45 D, E 115 (4 1/2”)SS Stainless Steel 30 C6, D6, E6 150 (6”)

HORIZONTAL TEERADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)T(Style)(Class Ref)-15-3030 (Material)T(Style)(Class Ref)-30-3045 (Material)T(Style)(Class Ref)-45-3060 (Material)T(Style)(Class Ref)-60-3075 (Material)T(Style)(Class Ref)-75-3090 (Material)T(Style)(Class Ref)-90-30

60 15 (Material)T(Style)(Class Ref)-15-6030 (Material)T(Style)(Class Ref)-30-6045 (Material)T(Style)(Class Ref)-45-6060 (Material)T(Style)(Class Ref)-60-6075 (Material)T(Style)(Class Ref)-75-6090 (Material)T(Style)(Class Ref)-90-60

90 15 (Material)T(Style)(Class Ref)-15-9030 (Material)T(Style)(Class Ref)-30-9045 (Material)T(Style)(Class Ref)-45-9060 (Material)T(Style)(Class Ref)-60-9075 (Material)T(Style)(Class Ref)-75-9090 (Material)T(Style)(Class Ref)-90-90

HORIZONTAL CROSSRADIUS WIDTH CATALOGUE NUMBERcm cm

30 15 (Material)X(Style)(Class Ref)-15-3030 (Material)X(Style)(Class Ref)-30-3045 (Material)X(Style)(Class Ref)-45-3060 (Material)X(Style)(Class Ref)-60-3075 (Material)X(Style)(Class Ref)-75-3090 (Material)X(Style)(Class Ref)-90-30

60 15 (Material)X(Style)(Class Ref)-15-6030 (Material)X(Style)(Class Ref)-30-6045 (Material)X(Style)(Class Ref)-45-6060 (Material)X(Style)(Class Ref)-60-6075 (Material)X(Style)(Class Ref)-75-6090 (Material)X(Style)(Class Ref)-90-60

90 15 (Material)X(Style)(Class Ref)-15-9030 (Material)X(Style)(Class Ref)-30-9045 (Material)X(Style)(Class Ref)-45-9060 (Material)X(Style)(Class Ref)-60-9075 (Material)X(Style)(Class Ref)-75-9090 (Material)X(Style)(Class Ref)-90-90

Example:A X L D 30 - 60

Example:A T L D 30 - 60

SPYDERLOK

25

FITT

ING

S

REDUCER FITTINGS

Fitting Reducers are available in right hand, left hand or concentric styles. CodeManufacturing strongly recommends the use of offset or concentric reducers whichare less costly and easier to install while doing the same job. See page 33 in theaccessories section of this catalogue.

WIDTH WIDTH LEFT HAND REDUCER RIGHT HAND REDUCER CENTER REDUCER1 2

90 75 (Material)RL(Style)(Class Ref) 90- 75 (Material)RR(Style)(Class Ref) 90- 75 (Material)RC(Style)(Class Ref) 90- 75

60 (Material)RL(Style)(Class Ref) 90- 60 (Material)RR(Style)(Class Ref) 90- 60 (Material)RC(Style)(Class Ref) 90- 60

45 (Material)RL(Style)(Class Ref) 90- 45 (Material)RR(Style)(Class Ref) 90- 45 (Material)RC(Style)(Class Ref) 90- 45

30 (Material)RL(Style)(Class Ref) 90- 30 (Material)RR(Style)(Class Ref) 90- 30 (Material)RC(Style)(Class Ref) 90- 30

15 (Material)RL(Style)(Class Ref) 90- 15 (Material)RR(Style)(Class Ref) 90- 15 (Material)RC(Style)(Class Ref) 90- 15

75 60 (Material)RL(Style)(Class Ref) 75- 60 (Material)RR(Style)(Class Ref) 75- 60 (Material)RC(Style)(Class Ref) 75- 60

45 (Material)RL(Style)(Class Ref) 75- 45 (Material)RR(Style)(Class Ref) 75- 45 (Material)RC(Style)(Class Ref) 75- 45

30 (Material)RL(Style)(Class Ref) 75- 30 (Material)RR(Style)(Class Ref) 75- 30 (Material)RC(Style)(Class Ref) 75- 30

15 (Material)RL(Style)(Class Ref) 75- 15 (Material)RR(Style)(Class Ref) 75- 15 (Material)RC(Style)(Class Ref) 75- 15

60 45 (Material)RL(Style)(Class Ref) 60- 45 (Material)RR(Style)(Class Ref) 60- 45 (Material)RC(Style)(Class Ref) 60- 45

30 (Material)RL(Style)(Class Ref) 60- 30 (Material)RR(Style)(Class Ref) 60- 30 (Material)RC(Style)(Class Ref) 60- 30

15 (Material)RL(Style)(Class Ref) 60- 15 (Material)RR(Style)(Class Ref) 60- 15 (Material)RC(Style)(Class Ref) 60- 15

45 30 (Material)RL(Style)(Class Ref) 45- 30 (Material)RR(Style)(Class Ref) 45- 30 (Material)RC(Style)(Class Ref) 45- 30

15 (Material)RL(Style)(Class Ref) 45- 15 (Material)RR(Style)(Class Ref) 45- 15 (Material)RC(Style)(Class Ref) 45- 15

30 15 (Material)RL(Style)(Class Ref) 30- 15 (Material)RR(Style)(Class Ref) 30- 15 (Material)RC(Style)(Class Ref) 30- 15

Catalogue Numbers

ALL FITTINGS ARE AVAILABLE IN THE FOLLOWING:MATERIAL STYLE DEGREE CLASS REF: (HEIGHT)

A Aluminum L Ladder (L) 90 Class Ref: mmS Pre-Galv Steel V Ventilated (V) 60 C 102 (4”)HD Hot Dipped Steel S Solid (S) 45 D, E 115 (4 1/2”)SS Stainless Steel 30 C6, D6, E6 150 (6”)

Left Reducer Right Reducer Center Reducer

SPYDERLOK

26

INSTRU

MEN

TATION

CHA

NN

EL

INSTRUMENTATION CHANNEL

Instrumentation Channel is available with or without dropout openings and tie downslots.

All aluminum channel and fittings accommodate Code Manufacturing's unique snap-on cover and are shipped complete with connector plates and hardware.

Unique snap-on cover design allows for easy installation and removal.

Also available for all non radius fittings.

CHANNEL TRAY HANGER

AIC75-HANGER SIC75-HANGER

AIC100-HANGER SIC100-HANGER

AIC150-HANGER SIC150-HANGER

PART PRODUCT MATERIAL WIDTH HEIGHT LENGTHNUMBER mm mm m

AIC75 ALUMINUM 75 (3”) 30 (1”) 3 (10’)AIC100 SOLID 100 (4”) 30 (1”)AIC150 INSTRUMENTATION 150 (6”) 65 (2 1/2”)SIC75 CHANNEL STEEL 75 (3”) 30 (1”) 3 (10’)SIC100 100 (4”) 30 (1”)SIC150 150 (6”) 65 (2 1/2”)AICP75 ALUMINUM 75 (3”) 30 (1”) 3 (10’)AICP100 PUNCHED 100 (4”) 30 (1”)AICP150 INSTRUMENTATION 150 (6”) 65 (2 1/2"î)SICP75 CHANNEL STEEL 75 (3”) 30 (1”) 3 (10’)SICP100 100 (4”) 30 (1”)SICP150 150 (6”) 65 (2 1/2”)AICC75 ALUMINUM 75 (3”) 3 (10’)AICC100 INSTRUMENTATION 100 (4”)AICC150 CHANNEL 150 (6”)SICC75 COVER STEEL 75 (3”) 3 (10’)SICC100 100 (4”)SICC150 150 (6”)

Solid Channel Punched Channel Instrumentation Channel Cover

5.500

2.000

0.500

4.128

SPYDERLOK

27

INST

RUM

ENTA

TIO

N C

HA

NN

ELINSTRUMENTATION CHANNEL FITTINGS

Style P/N Fitting Degree Width RadiusPrefix Description mm in

Instrumentation Aluminum E=Elbow 90 75 3 NRchannel AIC X=Cross

T=Tee 100 4Steel IV=Inside Vertical 90SIC OV=Outside Vertical 90 150 6

AR=Adj. RiserAE=Adj. Elbow

NON Radiused

HORIZONTAL HORIZONTAL HORIZONTALELBOW CROSS TEE

INSIDE VERTICAL OUTSIDE VERTICAL ADJUSTABLE VERTICAL HORIZONTAL ADJUSTABLERISER RISER RISER ELBOW

SPYDERLOK

28

MATERIALS FITTING STYLE DEGREE CLASS REF WIDTH RADIUSCM CM

A E C 90 C – 15 (6”) – 30 (12”)

S 60 C6 – 30 (12”) – 60 (24”)

HDS 45 D – 45 (18”) – 90 (36”)

SS 30 D6 – 60 (24”) –

E – 75 (30”) –

E6 – 90 (36”) –

EXAMPLE: AEC90D-30-60 OR SEC45E6-60-60

HORIZONTAL ELBOW COVERS

TEE COVERS

COVER

Flat cover is available for all Code Manufacturing straight lengths of cable tray andfittings. Ventilated covers and other custom styles are available upon request.

COVER

MATERIALS FITTING STYLE CLASS REF WIDTH RADIUSCM CM

A T C C – 15 (6”) – 30 (12”)

S C6 – 30 (12”) – 60 (24”)

HDS D – 45 (18”) – 90 (36”)

SS D6 – 60 (24”) –

E – 75 (30”) –

E6 – 90 (36”) –

EXAMPLE: ATCD-30-60 OR ATCE6-60-60

MATERIALS STYLE CLASS REF WIDTHCM

A C C – 15 (6”)

S C6 – 30 (12”)

HDS D – 45 (18”)

SS D6 – 60 (24”)

E – 75 (30”)

E6 – 90 (36”)

EXAMPLE: ACD-30 OR SCE6-60

STRAIGHT TRAY COVER

LW

SPYDERLOK

29

COVE

R

COVER

R

W

W

MATERIALS FITTING STYLE CLASS REF WIDTH RADIUSCM CM

A X C C – 15 (6”) – 30 (12”)

S C6 – 30 (12”) – 60 (24”)

HDS D – 45 (18”) – 90 (36”)

SS D6 – 60 (24”) –

E – 75 (30”) –

E6 – 90 (36”) –

EXAMPLE: AXCD-30-60 OR AXCE6-60-60

CROSS COVERS

MATERIALS FITTING STYLE DEGREE CLASS REF WIDTH RADIUSCM CM

A IV C 90 C – 15 (6”) – 30 (12”)

S 60 C6 – 30 (12”) – 60 (24”)

HDS 45 D – 45 (18”) – 90 (36”)

SS 30 D6 – 60 (24”) –

E – 75 (30”) –

E6 – 90 (36”) –

EXAMPLE: AIVC90D-30-60 OR AIVC90E6-60-60

INSIDE VERTICAL RISER COVER

MATERIALS FITTING STYLE DEGREE CLASS REF WIDTH RADIUSCM CM

A OV C 90 C – 15 (6”) – 30 (12”)

S 60 C6 – 30 (12”) – 60 (24”)

HDS 45 D – 45 (18”) – 90 (36”)

SS 30 D6 – 60 (24”) –

E – 75 (30”) –

E6 – 90 (36”) –

EXAMPLE: AOVC90D-30-60 OR AOVC90E6-60-60

OUTSIDE VERTICAL RISER COVER

SPYDERLOK

30

ACCESSO

RIES

SPYDERLOK CONNECTOR PLATES

Code’s unique “Labour Saver” SPYDERLOK Connector Plate is a Code Trayexclusive. The SPYDERLOK comes with factory installed pressed in bolts that requireonly four fasteners per tray. No Bolts Or Washers.

The speed with which SPYDERLOK can be installed reduces labour costs overcompetitive coupling devices and ensures swift installation of tray and fittings, whileproviding continuity of siderail alignment and strength.

SPYDERLOK VERSUS COMPETITIVE COUPLINGS:

SPYDERLOK

� Completely assembled with Factory Installed

Pressed in Bolts.

� A Real Labour Saver – Fast, and Easy.

� Organized and Efficient.

Competitive Couplings

� Come with a loose bag full of nuts, bolts, andwashers for you to install.

� Very Labour intensive.

� So many small parts are easy to loose.

� Unorganized.

GET ORGANIZED

Why choose anything but a SPYDERLOK?

SPYDERLOK

31

CABLE TRAY ACCESSORIES

EXPANSION CONNECTOR

Allows for minor expansion or contraction oftray installation.

Sold in pairs complete with hardware.

PART NUMBER:(Material)EC(Class Ref)e.g.. AECD or SECE6

ADJUSTABLE VERTICAL RISERS

Enables vertical changes during cable trayinstallation.

Sold in sets complete with hardware.

PART NUMBER: (Material)ARL(Class Ref)e.g.. AARLD or SARLE6

ADJUSTABLE HORIZONTAL ELBOWS

Enables horizontal adjustments during cabletray installation.

Sold in sets complete with hardware. (Bottompan not included.)

PART NUMBER: (Material)AEL(Class Ref)e.g.: AAELD or SAELE6

ACC

ESSO

RIES

W

6" (150mm)

SPYDERLOK

32

DROPOUTS

The solid surface curve clips easily onto rungs toallow cables to drop cleanly into place.

PART NUMBER: (Material) DR(Class Ref) - Widthe.g.: ADRD-30 or SDRE6-45

END PLATES

This single bracket closes off open ended cable traySold as each complete with hardware.

PART NUMBER: (Material)EP(Class Ref) - Widthe.g.: AEPD-30 or SEPE6-45

BARRIER STRIP

Straight 3 Meter length used to divide the cable trayinto various compartments.

PART NUMBER: (Material)BS(Class Ref)e.g.: ABSD or SBSE6

Barrier strip is also available for fittings

Horz. 90 Elbow ABSD-H90I/V Riser ABSD-IV90O/V Riser ABSD-OV90Tee ABSD-TCross ABSD-X

TRAY TO BOX CONNECTORS

Tray is easily connected to electrical panels or wallswith an assortment of connectors. Sold completewith hardware.

Other customized connectors available uponrequest.

ACCESSO

RIES

W

WID

TH

1/2"(12mm)

(3 METERS)

10 FT

SPYDERLOK

33

ACC

ESSO

RIES

OFFSET REDUCERS

Enables quick and economical connection betweencable tray of varying widths. Reduces down eitherleft or right side. Sold in singles complete withhardware.

PART NUMBER:(Material)OR(Class Ref) Width 1 - Width 2e.g.: AORD60-30 or SORE675-15

CONCENTRIC REDUCERS

Enables quick and economical connection betweencable tray of varying widths. Reduces evenly onboth sides of tray. Sold in pairs complete withhardware.

PART NUMBER:(MATERIAL)CR(Class Ref) Width 1 - Width 2e.g.: ACRD60-30 or SCRE675-15

STEP DOWN CONNECTORS

Enable quick connection between cable tray ofvarying heights. Sold in pairs complete withhardware.

HOLD DOWN CLIPS

COVER CLAMPS

The following clamps are recommended to use when it is necessary to fasten traycover down.

WRAP AROUND COVER CLAMP RAISED COVER CLAMP

AHDC-41 (for aluminum) SHDC (for steel)

Holds tray secure and in place.

ACCL or SCCL SHDC AWACCL or SWACCL ARCCL orSRCCL

SPYDERLOK

34

ACCESSO

RIES

WALL BRACKETS

UniformPart “A” “B” Wt/100pcs Load*Number In (mm) In (mm) Lbs (kg) Lbs (kg)

CWB-30 15 8 3/4 420 1,000152.4 190.5 453.6

CWB-45 21 8 3/4 628 1,000304.8 284.9 453.6

CWB-60 27 11 1/4 860 900457.2 390.1 408.2

CWB-75 33 11 1/4 1010 900457.2 458.1 408.2

CWB-90 39 16 1257 800609.6 683.3 362.9

UniformPart “A” Wt/100pcs Load*Number In (mm) Lbs (kg) Lbs (kg)

CSB-15 6 185 1,200152.4 83.9 544.3

CSB-30 12 293 600304.8 132.9 272.2

CSB-45 18 401 400457.2 181.9 181.4

CSB-60 24 509 300609.6 230.9 136.1

SPYDERLOK

35

WOOD BLOCK CLAMPS

ACC

ESSO

RIES

Code Manufacturing's woodblock clamp assemblies aremanufactured to your specificrequirements and priced onrequest. All assemblies areglyptol impregnated andsupplied complete withhardware. All holes arechamfered to avoid pinching ofcables.

ALUMINUM ROD HANGERS

Code Manufacturing's heavy duty, single piece, Rod Hanger includes a securing setscrew and is ideal for facilitating multiple tiers of cabletray.

STYLE PART NUMBER

ALUMINUMC, C6 AHB 41-39D, D6, E6 AHB 41-45

SPYDERLOK

36

SPYDERTRAY

Table of Contents

Features and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Straight Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-41

Splice Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Angle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-44

Misc. Connectors & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45-48

SPYDERTRAY

ST-HW

ST-HTTST-VW

ST-VP

ST-HP

ST-VT

ST-HBX

Load / Span Class designation (CSA C22.2 #126-M 1999)

Note: 8A /B/C, 12A/B/C, 16A/B/C AND 20A/B/C are the traditional NEMAdesignations. A,C,D, and E are the conventional CSA designations.

Span, m (ft)

Load kg /m (lb/ft) 2.4(8) 3.0(10) 3.7(12) 4.9(16) 6.0(20)

37 (25) A

67 (45) D

74 (50) 8A 12A 16A 20A

97 (65) C

112 (75) 8B 12B 16B E

149 (100) 8C 12C 16C 20C

179 (120) D

299 (200) E

SPYDERLOK

SPYD

ERTR

AY

SPYDERTRAY FEATURES AND SPECIFICATIONS

76.20

38.10

3.81- 0.254

0

2.360

+ 0.254

1.27

16.26

3.81

33.38

R 1.56

CLCCL

14.73 mm

0.65mm x 90°V GROOVETYP.

+.41-.00

14.73 mm

4.32 mm

0.63 mm

3.05 mm

+.41-.00

R1.57 mm

� Standard Length – 3meters.

� SPYDERTRAY rungs are factory installed at right angles along thespine and bent upwards at 90 degrees to form the cable supports.Material is extruded 6063 T6 aluminum.

� SPYDERTRAY is dual-rated to meet both CSA Class C1 and D1 specifications. This allows you to stock one inventory for both applications

� SPYDERTRAY is manufactured locally at Code Manufacturing‘s Coquitlam plant. Localproduct allows fast delivery to site.

� SPYDERTRAY is a lightweight, highstrength and corrosion resistantalternative to ladder tray installations.

� Suspended from a single point andrequiring only one splice connectorper length SPYDERTRAY is FAST toinstall. This can result in substantiallabour cost savings.

� The SPYDERTRAY system offers greatflexibility with a reduced number ofcore fittings allowing maximum jobsite versatility.

� Cables are layered on both sides,offering continuous, unobstructedaccess to the tray from either side ofthe center spine member. Veryaccommodating for future expansion.

� SPYDERTRAY spine is made fromhigh quality aluminum extrusion6005A T6 which is pre-punched toallow for inserted rungs.

Standard Rung

Widths

07 = 7.5cm (3”)

15 = 15cm (6”)

22 = 22cm (9”)

30 = 30cm (12”)

45 = 45cm (18”)

60 = 60cm (24”)

Standard Rung

Spacing

07 = 7.5cm (3”)

15 = 15cm (6”)

22 = 22cm (9”)

30 = 30cm (12”)

45 = 45cm (18”)

60 = 60cm (24”)

Standard Rung

Depth

07 = 7.5cm (3”)

10 = 10cm (4”)

15 = 15cm (6”)

WARNING! Do not use as a walkway, ladder or support for personnel.

Use only as a mechanical support for cables, tubing and raceways.

SPYDERLOK

38

SPYDERTRAY

CENTER MOUNT TOP RUNG

CSA Class C1 & D1 – Spine Length 3m (10 feet)

Spyder Tray – CENTER MOUNT TOP RUNG Straight Section Part Numbering

Example Part Number: ST-CT07-07-15

ST CT07 07 15

TYPE STYLE / RUNG DEPTH RUNG SPACING (cm) RUNG WIDTH (cm)

SPYDER TRAY C = Center Mount 07 = 7.5cm (3 inches) 15 = 15cm (6 inches)

T = Top Rung 15 = 15cm (6 inches) 22 = 22.5 cm (9 inches)

07 = 7.5cm (3 inches) 22 = 22.5cm (9 inches) 30 - 30cm (12 inches)

10 - 10cm (4 inches) 30 = 30cm (12 inches) 45 = 45cm (18 inches)

15 = 15cm (6 inches) 45 = 45cm (18 inches) 60 = 60cm (24 inches)

60 = 60cm (24 inches)

All SPYDERTRAY rungs are inserted directly through the spine material and crimp locked in place for a secure, trouble free fit. No moving parts to wear out or vibrate loose under stress.

CENTER MOUNT TOP RUNG tray offers the full tray width available for cables. Sides are open allowingadditional cables to be added easily for trouble free expansion.

**All accessories and fittings for CENTER MOUNT TOP RUNG tray must either be UNIVERSAL fittingsor specific TOP RUNG/BOTTOM RUNG fittings. See fittings and accessories for more detail.

Contact Factory for Custom Lengths and Widths.

SPYDERLOK

39

SPYD

ERTR

AY

CENTER MOUNT BOTTOM RUNG

CSA Class C1 & D1 – Spine Length 3m (10 feet)

Spyder Tray – CENTER MOUNT BOTTOM RUNG Straight Section Part Numbering

Example Part Number: ST-CB07-07-15

ST CB07 07 15

TYPE STYLE / RUNG DEPTH RUNG SPACING (cm) RUNG WIDTH (cm)

SPYDER TRAY C = Center Mount 07 = 7.5cm (3 inches) 15 = 15cm (6 inches)

B = Bottom Rung 15 = 15cm (6 inches) 22 = 22.5 cm (9 inches)

07 = 7.5cm (3 inches) 22 = 22.5cm (9 inches) 30 - 30cm (12 inches)

10 - 10cm (4 inches) 30 = 30cm (12 inches) 45 = 45cm (18 inches)

15 = 15cm (6 inches) 45 = 45cm (18 inches) 60 = 60cm (24 inches)

60 = 60cm (24 inches)

All SPYDERTRAY rungs are inserted directly through the spine material and crimp locked in place for a secure, trouble free fit. No moving parts to wear out or vibrate loose under stress.

CENTER MOUNT BOTTOM RUNG tray offers the convenience of using the spine as a built in cabledivider. Sides are open allowing additional cables to be added easily for trouble free expansion.

**All accessories and fittings for CENTER MOUNT BOTTOM RUNG tray must be specific BOTTOM RUNG fittings. See fittings and accessories for more detail.

Contact Factory for Custom Lengths and Widths.

SPYDERLOK

40

SPYDERTRAY

WALL MOUNT TOP RUNG

CSA Class C1 & D1 – Spine Length 3m (10 feet)

Spyder Tray – WALL MOUNT TOP RUNG Straight Section Part Numbering

Example Part Number: ST-WT07-07-15

ST WT07 07 15

TYPE STYLE / RUNG DEPTH RUNG SPACING (cm) RUNG WIDTH (cm)

SPYDER TRAY W = Wall Mount 07 = 7.5cm (3 inches) 15 = 15cm (6 inches)

T = Top Rung 15 = 15cm (6 inches) 22 = 22.5 cm (9 inches)

07 = 7.5cm (3 inches) 22 = 22.5cm (9 inches) 30 - 30cm (12 inches)

10 - 10cm (4 inches) 30 = 30cm (12 inches) 45 = 45cm (18 inches)

15 = 15cm (6 inches) 45 = 45cm (18 inches) 60 = 60cm (24 inches)

60 = 60cm (24 inches)

All SPYDERTRAY rungs are inserted directly through the spine material and crimp locked in place for a secure, trouble free fit. No moving parts to wear out or vibrate loose under stress.

WALL MOUNT TOP RUNG tray offers the full tray width available for cables. Sides are open allowingadditional cables to be added easily for trouble free expansion.

**All accessories and fittings for WALL MOUNT TOP RUNG tray must either be UNIVERSAL fittings orspecific TOP RUNG/BOTTOM RUNG fittings. See fittings and accessories for more detail.

Contact Factory for Custom Lengths and Widths.

SPYDERLOK

41

SPYD

ERTR

AY

WALL MOUNT BOTTOM RUNG

CSA Class C1 & D1 – Spine Length 3m (10 feet)

Spyder Tray – WALL MOUNT BOTTOM RUNG Straight Section Part Numbering

Example Part Number: ST-WB07-07-15

ST WB07 07 15

TYPE STYLE / RUNG DEPTH RUNG SPACING (cm) RUNG WIDTH (cm)

SPYDER TRAY W = Wall Mount 07 = 7.5cm (3 inches) 15 = 15cm (6 inches)

B = Bottom Rung 15 = 15cm (6 inches) 22 = 22.5 cm (9 inches)

07 = 7.5cm (3 inches) 22 = 22.5cm (9 inches) 30 - 30cm (12 inches)

10 - 10cm (4 inches) 30 = 30cm (12 inches) 45 = 45cm (18 inches)

15 = 15cm (6 inches) 45 = 45cm (18 inches) 60 = 60cm (24 inches)

60 = 60cm (24 inches)

All SPYDERTRAY rungs are inserted directly through the spine material and crimp locked in place for a secure, trouble free fit. No moving parts to wear out or vibrate loose under stress.

WALL MOUNT BOTTOM RUNG is ideal where suspended mounting is too difficult.

**All accessories and fittings for WALL MOUNT BOTTOM RUNG tray must either be UNIVERSALfittings or specific TOP RUNG/BOTTOM RUNG fittings. See fittings and accessories for more detail.

Contact Factory for Custom Lengths and Widths.

SPYDERLOK

42

SPYDERTRAY

SPLICE PLATES (TOP or BOTTOM rung)

ST-SC SPLICE CONNECTOR

Basic Splice connector. Used primarily for wall or floor mountedinstallations because it is lacking the pre-drilled top hole.

ST-SCT SPLICE CONNECTOR with TOP HOLE

The most common Splice connector. Comes pre-drilled with avertical 9/16” hole to accommodate 1/2” threaded rod. Alwaysleave 1” threaded rod to allow for future expansion with theaddition of multiple levels of SPYDERTRAY.

ST-SCB SPLICE CONNECTOR with BUSHING

Same as to the ST-SCT with the addition of a nylon bushing toallow for systems using dissimilar metals or applications thatneed to be electrically isolated from the support system.

ST-SCR SPLICE CONNECTOR with RETROFIT

A three piece RETRO fit connector allows additional runs to beadded to an existing threaded rod suspension system. Fitsaround the existing threaded rod and is secured into place usingtwo threaded split nuts (included).

ST-SCE SPLICE CONNECTOR END CAP

Close up the end of the spine with this simple end cap.

ANGLE CONNECTORS

ST-VP VERTICAL PIVOT SPLICE

(TOP or BOTTOM RUNG)

Our most common vertical fitting allows the installer to changecourse to any vertical angle quickly and inexpensively.

Must be installed from the end of a run only. Use a VERTICALTEE (ST-VT) to drop down mid-span.

ST-VW(A) VERTICAL WELDED SPLICE

(TOP or BOTTOM RUNG)

An option to the ST-VP. Specific angle fittings areavailable in four standard radii as well ascommon angles.

Specify Angle – 30° / 45° / 60° / 90°Custom dimensions also available.

ST-VOFF(L) VERTICAL OFFSET

(TOP or BOTTOM RUNG)

Used to drop a tray run down around anobstacle. Custom length determined by enduser.

Specify length of offset required – 30 / 45 / 60Custom dimensions also available.

ST-VT VERTICAL TEE SPLICE

(TOP or BOTTOM RUNG)

Allows the installer to drop a run straight down from a horizontalrun. This differs from the VCONN-PIVOT because it can be usedmid-span.

ST-HP HORIZONTAL PIVOT

(TOP or BOTTOM RUNG)

Our most common HORIZONTAL fitting allows the installer tochange course to any horizontal angle quickly and inexpensively.

Must be installed from the end of a run only. Use a HORIZONTALTEE (ST-HBT or ST-HTT) to drop down mid-span.

ST-HW(A) WELDED HORIZONTAL SPLICE

(TOP or BOTTOM RUNG)

Specific angle fittings are available in four radii.

Specify angle – 30° / 45° / 60° / 90°

Custom dimensions also available.

SPYDERLOK

43

SPYD

ERTR

AY

ST-VW30 (12”)ST-VW45 (18”)ST-VW60 (24”)ST-VW90 (30”)

ST-VOFF30 (12”)ST-VOFF45 (18”)ST-VOFF60 (24”)

ST-HW30 (12”)ST-HW45 (18”)ST-HW60 (24”)ST-HW90 (30”)

SPYDERLOK

44

SPYDERTRAY

ST-HOFF(Length) HORIZONTAL OFFSET

(TOP or BOTTOM RUNG)

Used to move a run around an obstacle or toswitch from WALL mount to CENTER mount.Custom length determined by end user.

Specify length of offset required – 30 / 45 / 60Custom dimensions also available.

ST-HTT(Width) HORIZONTAL TEE CONNECTOR

(TOP RUNG ONLY)

Add a 90° run from any point along an existingline.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-HBT(Width) HORIZONTAL TEE CONNECTOR )

(BOTTOM RUNG ONLY

Add a 90° run from any point along an existingline.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-HTX(W) HORIZONTAL CROSS CONNECTOR

(TOP RUNG ONLY)

Add two opposing 90° runs from any pointalong an existing line.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-HBX(W) HORIZONTAL CROSS CONNECTOR

(BOTTOM RUNG ONLY)

Add two opposing 90° runs from any pointalong an existing line.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-HOFF30 (12”)ST-HOFF45 (18”)ST-HOFF60 (24”)

ST-HTT15 (6”)ST-HTT22 (9”)ST-HTT30 (12”)ST-HTT45 (18”)ST-HTT60 (24”)

ST-HTT15 (6”)ST-HTT22 (9”)ST-HTT30 (12”)ST-HTT45 (18”)ST-HTT60 (24”)

ST-HTX15 (6”)ST-HTX22 (9”)ST-HTX30 (12”)ST-HTX45 (18”)ST-HTX60 (24”)

ST-HBX15 (6”)ST-HBX22 (9”)ST-HBX30 (12”)ST-HBX45 (18”)ST-HBX60 (24”)

ANGLE CONNECTORS

MISCELLANEOUS CONNECTORS

ST-BT(Depth)-(Width) BOX CONNECTOR

(TOP RUNG ONLY)

Connect your SPYDERTRAY run with anenclosure.

Specify width of tray run – 15 / 22 / 30 / 45 / 60Specify depth of tray run – 07 / 10 / 15Custom dimensions also available.

ST-BB(Depth)-(Width) BOX CONNECTOR

(BOTTOM RUNG ONLY)

Connect your SPYDERTRAY run with anenclosure.

Specify width of tray run – 15 / 22 / 30 / 45 / 60Specify depth of tray run – 07 / 10 / 15Custom dimensions also available.

ST-ET(Depth)-(Width) DEAD END CONNECTOR

(TOP RUNG ONLY)

Finished a dead end run.

Specify width of tray run – 15 / 22 / 30 / 45 / 60Specify depth of tray run – 07 / 10 / 15Custom dimensions also available.

ST-EB(Depth)-(Width) DEAD END CONNECTOR

(BOTTOM RUNG ONLY)

Finished a dead end run.

Specify width of tray run – 15 / 22 / 30 / 45 / 60Specify depth of tray run – 07 / 10 / 15Custom dimensions also available.

ST-W WALL CONNECTOR

(TOP or BOTTOM RUNG)

Used to connect a tray run to a wall support.

**Does NOT include screws to fasten bracket to a wall.

SPYDERLOK

45

SPYD

ERTR

AY

ST-BT07-15 (3”x6”)ST-BT07-22 (3”x9”)ST-BT07-30 (3”x12”)ST-BT07-45 (3”x18”)ST-BT07-60 (3”x24”)

ST-BB07-15 (3”x6”)ST-BB07-22 (3”x9”)ST-BB07-30 (3”x12”)ST-BB07-45 (3”x18”)ST-BB07-60 (3”x24”)

ST-ET07-15 (3”x6”)ST-ET07-22 (3”x9”)ST-ET07-30 (3”x12”)ST-ET07-45 (3”x18”)ST-ET07-60 (3”x24”)

ST-EB07-15 (3”x6”)ST-EB07-22 (3”x9”)ST-EB07-30 (3”x12”)ST-EB07-45 (3”x18”)ST-EB07-60 (3”x24”)

SPYDERLOK

46

SPYDERTRAY

ACCESSORIES

ST-C(Width) FLAT TRAY COVER

(TOP or BOTTOM RUNG)

Flat Aluminum cover is shipped in standard1.5m (5’) lengths.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-CP(Width) PEAKED TRAY COVER

(TOP or BOTTOM RUNG)

Peaked Aluminum cover is shipped in standard1.5m (5’) lengths.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-CBT(Width) BOTTOM TRAY COVER

(TOP RUNG ONLY)

Aluminum Bottom cover is shipped in standard1.5m (5’) lengths.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-CBB(Width) BOTTOM TRAY COVER

(BOTTOM RUNG ONLY)

Aluminum Bottom cover is shipped in standard1.5m (5’) lengths.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-BS(Depth) BARRIER STRIP

(TOP or BOTTOM RUNG)

Aluminum Barrier Strip is shipped in standard1.5m (5’) lengths. Specify the DEPTH required.

Specify depth of tray run – 07 / 10 / 15

Custom dimensions also available.

ST-SB(Length) STIFFENER BAR

(TOP or BOTTOM RUNG)

Used to control eccentric loading. SpecifyLength of bar required.

Specify length of bar – 30 / 45 / 60 / 75 / 90

Custom dimensions also available.

ST-C15 (6”)ST-C22 (9”)ST-C30 (12”)ST-C45 (18”)ST-C60 (24”)

ST-CP15 (6”)ST-CP22 (9”)ST-CP30 (12”)ST-CP45 (18”)ST-CP60 (24”)

ST-CBT15 (6”)ST-CBT22 (9”)ST-CBT30 (12”)ST-CBT45 (18”)ST-CBT60 (24”)

ST-CBB15 (6”)ST-CBB22 (9”)ST-CBB30 (12”)ST-CBB45 (18”)ST-CBB60 (24”)

ST-BS07 (3”)ST-BS10 (4”)ST-BS15 (6”)

ST-SB30 (12”)ST-SB45 (18”)ST-SB60 (24”)ST-SB75 (30”)ST-SB90 (36”)

ACCESSORIES

ST-GC(Length) GROUND CABLE – COPPER

Tin plated copper ground cable.

Specify length of cable – 30 / 45 / 60

Custom dimensions also available.

ST-GA(Length) GROUND CABLE – ALUMINUM

Aluminum Ground Cable.

Specify length of cable – 30 / 45 / 60

Custom dimensions also available.

ST-WS WALL SPACER

Three spacers are automatically included with each length ofWALL MOUNT Spydertray. They are also available for orderseparately.

ST-WB(Width) WALL BRACKET

Wall Brackets are used as an alternative tosuspended installations where necessary.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

ST-RC-(COLOR) PLASTIC RUNG CAPS

Plastic End Caps used to colour code spydertray runs. Theseplastic caps are field installed for easy on the spot colouridentification of wire runs.

Specify colour of rung cap – blue, red, orange or black

ST-DO (Width) CABLE DROP OUT

Permits cable drop outs over a rounded radiusto prevent damage to cables.

Specify width of tray run – 15 / 22 / 30 / 45 / 60

SPYDERLOK

47

SPYD

ERTR

AY

ST-GC30 (12”)ST-GC45 (18”)ST-GC60 (24”)

ST-GA30 (12”)ST-GA45 (18”)ST-GA60 (24”)

ST-WB15 (6”)ST-WB22 (9”)ST-WB30 (12”)ST-WB45 (18”)ST-WB60 (24”)

ST-DO15 (6”)ST-DO22 (9”)ST-DO30 (12”)ST-DO45 (18”)ST-DO60 (24”)

SPYDERLOK

48

SPYDERTRAY

ACCESSORIES

ST-FF(Height) FLOOR STAND – FLAT TOP

(TOP or BOTTOM RUNG)

Easy floor installation of Spydertray with thesemounting accessories.

Specify height of floor stand required.

ST-FN(Height) FLOOR STAND – NEST TOP

(TOP RUNG ONLY)

Easy floor installation of Spydertray with thesemounting accessories. Specify Height required.

Specify height of floor stand required.

Custom dimensions also available.

ST-FF15 (6”)ST-FF22 (9”)ST-FF30 (12”)ST-FF45 (18”)ST-FF60 (24”)

ST-FN15 (6”)ST-FN22 (9”)ST-FN30 (12”)ST-FN45 (18”)ST-FN60 (24”)

Thank you for choosing cable tray built in

Canada by Code Manufacturing Ltd.

Your tray sales contact is:

Please ensure you have included the following information as required.

Printed in Canada 06/2001

QUOTATIONS– Project Name

– Project Location

– Contractor Name

– Bill of Materials (Quantities)

– CSA Load Class (C1/C6. D1/D6. E1, E6)

– Tray Style

(Ladder, Ventilated, Solid, Spyder)

– Material Type (Steel, Aluminum, Stainless)

– Width

– Rung Spacing

– Radius of Fittings

– Closing Date

PURCHASE ORDERS– PO Number

– Code Quotation Number

– Requested Delivery Date

– Site Map (If Necessary)

– Site Phone Number and Contact

CABLE TRAY Purchase OrdersAll cable tray purchase orders are made out to:

Code Manufacturing Ltd.

100 – 2050 Hartley Avenue

Coquitlam, BC V3K 6W5

Tel: (604) 540-0011 Fax: (604) 540-0033

Internet: www.codeelectric.com

ENCLOSURE Purchase OrdersAll orders for electrical enclosures including the

Eurobex line (represented by Code Electric in BC

only) must be made out to:

Code Electric Products Ltd.

100 – 2050 Hartley Avenue

Coquitlam, BC V3K 6W5

Tel: (604) 540-0011 Fax: (604) 540-0033

Internet: www.codeelectric.com

IMPORTANTThe cable tray and enclosures companies are

separate entities and orders for each product

must be placed separately.