CODEC

Welcome to your Crestron Presentation system with

Video Conferencing!

Crestron Presentation and Video Conferensing pages can be used with

a variety of Crestron touch screens and remotes, or they can be uploaded

on tablets and/or phones by using the Crestron App

Note that the type and location of touch screen hard buttons will vary

depending on the touch screen model.

The examples below will use Crestron TSW-752 as shown on the right:

CODEC

Video Conferencing (Codec) pages are accessed via the Codec footer button.

1 CODEC footer button The Codec footer button is located at the footer of the page and can be

conveniently accessed from each touch screen page.

Press this button to make a conference call using the CODEC pages.

CODEC

MAKE A CALL Choose whether to initiate an Audio or Video call

Audio Call button

Press this button to start Audio Call and

access the Audio Dialer Page. 1

Video Call button

Press this button to start Video Call and

access the Video Dialer Page.

AUDIO CALL Use this pag page to start Audio Call.

Audio Dialer Entry Field

Use the keypad to enter a phone number or IP address in the entry field

Speed Dial List Click on a preset (if available) from the Speed Dial List.

Presets in the Speed Dial List are set by the installer. 1

Backspace Button

Use the backspace button to correct any mistakes when entering the number.

Dial Button

Press the Receiver button to start the call.

CODEC

DIALING PAGE

A Dialing Page is displayed after the call is dialed and before the participant on

the other end answers.

End Call button

Press this button to end the outgoing audio call.

Mute button

Press the Mute button to mute the your microphone

CODEC

1 INCOMING CALL

When another party initiates a call, an incoming call page is displayed

on top of all other touch screen pages (even if the codec is not the

selected source) and ringing can be heard through the room speakers.

2 Dismiss button

Press the Dismiss button to decline the call. 1

3 Answer button

Press Answer button to accept the call.

CODEC

CALL WAITING Call-Waiting Page is displayed when the codec receives an incoming call

request while already participating in another call.

Ignore button

Press the 'Ignore' button to dismiss the Call Waiting page and return to

the active call . 1

End Current + Answer button

Press the 'End Current + Answer' button to hang up the active call and

establish a new call with the incoming call.

CODEC

CALL IN PROGRESS

This page is displayed when an Audio or Video Call is answered

1 Present button

Press this’ button to begin a Presentation while in a call.

2 Leave button

Press this button to terminate the call.

3 Keypad Button

Press this button to open the Audio/video Call Dialer page without ending

the call in progress.

Disable Video

Press the Disable Video button to stop /disable the local camera.

CODEC

VIDEO CALL Use this page to start Video Call.

1 Video Dialer Entry Field

Use the keypad to enter a phone number or IP address In the entry field

Speed Dial List Click on a preset (if available) from the Speed Dial List. Presets in the

Speed Dial List are set by the installer. 1

Backspace Button

Use the backspace button to correct any mistakes when entering the number.

Dial Button

Press this button to start the Video call when the number was manually

entered in the Video Dialer Entry field.

CODEC

1 DIALING Page This page is an Interim screen displayed after the call was dialed but before the

call is answered, a timeout on the CODEC wrapper will close this page and return

to the dialer after 45 seconds

End Call button

Press this button to end the call in progress. 1

Disable Video button

Press this button to disable the local camera

Mic Mute button

Press this button to mute the local microphone

1

2

3

CODEC

4 VIDEO CALL Page

Video Call page is displayed when a Video Call is answered

5 Presenting button

Press ‘Present’ button to begin a Presentation while in a call. 1

Camera Controls & Extended Camera Controls

Select Camera presets (setup by the Installer) or use the Pan, Tilt and Zoom

camera settings to move the camera to the desired camera angle and or/position.

Leave button

Press this button to end the Call

Keypad Button

Press the Keypad button to returns to the Keypad without ending the current call.

Disable Video button

Press this button to disable the local camera

CODEC

1 PRESENTATION PAGES When in a call, the ‘Call In Progress’ status bar is displayed at the top of

any Source control or Presentation Pages to allow quick navigation to the

‘Call In Progress’ page.

’Call in Progress’ Status Bar

Allows quick return to the Call In Progress page from any other page in the

project.

Note: When in a call simply press the Home hard button to access the Source

Selection pages.

1

1 SYSTEM SHUTDOWN Initiate System Shutdown by pressing the Power Hard Button on the right

hand side of the touch screen.

Call In Progress Warning

This message is displayed when attempting to shut down the system while

there is a call in progress.

System Off button Press this button to terminate the active call and shut down the system.

This action will turn off the displays and other equipment.

Cancel button

Press this button to return to the call in progress.