CODY BRANDON TURNER14077 Innerarity Point Road , Pensacola, FL 32507

Home: 205 499-0022cbturner60@yahoo.com

Compliance Technician who is an expert in industrial safety. Takes preventative measures against fire and electricalhazards, equipped with the managerial skill sets necessary to successfully oversee large industrial facilities. I am drivenand proactive when tackling issues with accuracy and a concern for the safety of personnel. I work well with others,while also working efficiently and effectively on my own. I am seeking a position where I can further develop andexpand my knowledge while giving my best possible performance to my employer.

Microsoft Office proficient.Skilled in MFD, PFD and Safe Chartinterpretation. Skilled in use of device calibration equipment suchas Emerson 275/375/475, RTD calibrators,Manometers, etc.Experienced in Deep Water Operations andextremely knowledgeable of Subsea Well processes.Crane Operator certifiedExperienced in H2S facilities and familiar withAmine System.

Experienced with analysis software and Data Entrysystems such as (Delta V, SMART ComplianceTechnology, SEMP Check, JD Edwards, SAP.  Highly knowledgeable of BSEE and Coast Guardregulations and have been lead technician throughseveral inspections. Highly experienced in Fire & Gas monitoringsystem installations and testing.Experienced in Process Safety Systems andEmergency Safety System Installation,Repair andtesting.

Promoted to Lead Technician after just 2 years of training.Lead team to INC Free Inspection on Murphy facilities Front Runner and Thunderhawk 2014-2015.Established good working relationships with all co workers on all three of Murphy Expro facilities.

01/2012 to 03/2016

MURPHY OIL EXPRO (MEDUSA, FRONT RUNNER, THUNDERHAWK CONTRACTS)Houston , TX

Compliance TechnicianExemplary marks in safety and understanding of safety awareness. Cleaned and lubricated machinery and equipment.Used hand tools to replace defective equipment parts.Replaced worn and damaged hoses, wiring and belts.Retrieved correct materials from product inventory to perform various fabrication duties.Assembled and installed wiring, electrical and electronic components.Installed, calibrated and configured combustible, toxic gas detectors.Wired outlets, connected circuits and breakers and replaced fuses and fuse boxes.Supervised a team of 4 employees on a Chemical Injection Header InstallationInstalled devices for fire alarm systems.Conducted functional tests for fire alarm systems.Research manufacturer manuals, diagrams and specifications prior to repairing equipment.Installed and removed ESS & PSS systems, including pulling wire, device termination and mounting brackets.Examined systems to locate problems such as loose connections and broken insulation.Installed, maintained and repaired Inspected installation sites to determine material requirements.Ran diagnostic tests to verify functionality of Process equipment.Responded to corrective maintenance requests and alarms in a timely manner.Tracked data from completed tests, and developed solutions to any issues.Interpreted prints, drawings and sketches.Assessed work for errors or compliance issues and made corrections and modifications when necessary.Performed and reviewed Statistical Process Control (SPC), including data collection, charts and graphs.Performed all compliance testing and calibrations for facility on devices such as Pressure, Level, Differential

SUMMARY

HIGHLIGHTS

ACCOMPLISHMENTS

EXPERIENCE

transmitters and SDV & BDV's.

06/2011 to 03/2012

MURPHY EXPRO "THUNDERHAWK, FRONT RUNNER" CONTRACTSHouston, TX

Facility OperatorMonitored well pressures and equipment on daily basis (Pumps, Levels, etc). Monitored BS&W readings on allfunctioning wells on daily basis. Operated Crane offloading and backloading equipment and personnel. Testedmachinery, equipment and parts to identify any defects. Maintained up to date repair logs. Checked fluid levels andreplaced filters on process equipment. Disassembled and reassembled process equipment for repairs. 

04/2008 to 06/2011

ERT /TALOS ENERGYHouma, LA

OperatorMonitored BS&W's on all functioning wells daily.Operated Crane offloading and backloading equipment and Personnel.Worked in H2S environment, Familiarized with Amine System set up.Exemplary marks in Safety and understanding of safety awareness in H2S Environment.Routinely tested components for MMS Inspections.Kept a clean working environment for all personnel.Established good relationships with Co-Workers and Supervisors.Kept up with inventory and made purchases as needed.Maintained facility and dealt with day to day issues.Regularly inspected Fire and Lifesaving equipment Tested machinery, equipment and parts to identify anydefects.Reassembled equipment after completed repairs.Operated tools such as hoists and saws.Replaced worn and damaged hoses, wiring and belts.Maintained up-to-date and accurate repair logs.Recorded pressure, temperature, level and flow data into databases.Conducted functional tests for fire alarm systems.Read manufacturer manuals, diagrams and specifications prior to repairing equipment.Soldered and brazed damaged equipment.Improved knowledge and productivity through continuous education and learning from foreman and senioremployees.

May 2004HIGH SCHOOL DIPLOMAFlomaton High School, Flomaton, AL

April 2008ASSOCIATE OF SCIENCEUniversity of West Alabama, Livingston, AL, US

First Aid certifiedT-2 CertifiedTWIC Card holder (Available on request)Certified Coast Guard Lifeboat manTrained in Water SurvivalConfined Space Entrant/Rescue CertifiedRope Rescue CertifiedAdvanced Fire Fighting certifiedIncipient Fire Certified

References Available upon request

EDUCATION

CERTIFICATIONS

REFERENCES

SKILLS

 Proficient in troubleshooting process equipment and safety systems. Skilled in Compliance testing andregulations. Skilled in Fire and Gas detection installation and repairs.

 3 Year letterman on the University of West Alabama Football Team ADDITIONAL INFORMATION