college of engineering brmhs power generation lab kit team wired up 1 construction milestone
TRANSCRIPT
1
Collegeof ENGINEERING
BRMHS Power Generation Lab KitTeam Wired Up
Construction Milestone
Outline
• Progress• Design Changes• Issues• Budget• Projected Work
Progress: Power Supply
• We split Power PCB and Keypad/Data Acquisition PCB
• Power PCB was made at LSU• In the process of transferring circuit from
breadboard to PCB
Power Supply
Progress: INA219/LCD/Keypad Schematic
INA219/LCD/Keypad PCB
Design Changes: Windbelt
Base Cover
Design Changes: Hand Crank
Front View Side View
Design Changes: Spin Lever
Updated Kit Design
Issues
• INA219 PCB pull up resistor• One kit instead of two
Budget
Quantity Item Name Total Price Shipping
1Wind Belt
Tape Mylar Paper Silver Chrome Adhesive Back 1/2" 25ft 1.98See
Below
1Copper
Wire Magnet Wire 30 Gauge Awg Enamel Copper 1570 ft 11.08 7.89
10 MagnetsNeodymium Magnets N45 1/2 x 1/8 in LED hrowies
Rare Earth Disc 3.9See
Below
8 MagnetsRare Earth Magnets 2in x 1/2 x 1/8 Neodymium Bar
Magnet 14 16.84
1 LCD Display, LCD, Parallel, 16x4 10.95See
Below
1 Keypad Keypad, 12-Button Numeric, Black 2.59 6.46
2 PCB PCB for INA219/LCD/Keypad 92 13.36
1 Generator Dynamo Bicycle Generator 17.30 0
1 Cable Mini USB 5.09 0
Total 203.44
Projected Work
• Finish construction of all modules
• Have all modules fully integrated
• Have a demo of the completed lab kit for Final Presentation– All experiments provided
to BRMHS will be demonstrated